Oki C5400 manuale d’uso

[...]

C5400/C5400n User ’s Guide P/N 59361601, revision 1.2 July , 2005 Every effort has been ma de to ensure that the information in this document is complete, accurate, and up-to- date. The manufacturer assumes no responsibility for the resu lts of errors bey ond its contro l. The manufacturer also cannot guarantee that changes in software and equipm[...]

•1 Cont ents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Printer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Rear View . . . . . . . . . [...]

•2 Jam 371 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Jam 391 and 392 116 Jam 390 118 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 LCD messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Problem Solving [...]

•3 Color Swatch Utility 293 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 Installing the Color S watch Utility . . . . . . . . . . . . . . . . . . . . . . 293 Opening the Color Swatch utility. . . . . . . . . . . . . . . . . . . . . . . . 293 Using the Color Swatch Utility . . . . . . . . . . . . . . [...]

Notes, Cautions, etc. • 4 Not es, Cautions, etc. NOTE A note appears like this. A note provides ad ditional information to supplement the main text which helps you to use and u nderstand the product. Impor tant! An important message appears like this. An important message provides supplemental informat ion which can prevent potential problems. CA[...]

Introduction • 5 Introduction Your new printer is designed with advanced features to give you clear, vibrant color printing and cr isp bl ack and white pages at high speed on a ra nge of print media. Features: • Up to 16 p ages per minute in full color . • Up to 24 p ages per minute in black and white. • 600 dpi (dot s per inch) print re so[...]

Introduction • 6 Print er Overview F ront V iew Output Stac ker, face down Standard printed copy delivery po int. Holds up to 250 sheets of 20-lb. US Bond (75 g/m²) paper. Operator Panel Menu driven opera tor controls and LCD display panel (ca n be changed to show different languag es: see page 8). PaperTray Standard blank paper tray. Holds up t[...]

Introduction • 7 Rear View On/Off Switch Socket for Power Cord Parallel Interface USB Interface Network Interface Optional Duplex Unit Rear Stacker (face up), Cap acity100 sheets 20-lb. US Bond (75 g/m²) paper When the rear paper stacker is folded do wn, paper exits the printer through the rear of the printer and is stacked here face up. This is[...]

Introduction • 8 Chang ing the display language 1. Press MENU + repeatedly until you see SYSTEM CONFIG MENU POWER SAVE DELAY TIME 2. Press EN TER . 3. Press MENU + repeatedly until you see SYSTEM CONFIG MENU LANGUAGE 4. Press EN TER . 5. Press MENU + and/or MENU – repeatedly until you see the language you wish to select. 6. Press EN TER to sele[...]

Media Recommendations • 9 Media Recommendations Your printer can han dle a variety of print media, including a range of paper weights and sizes, transpar encies, labels and envelopes. This section provides general advice on choice and use of media. Media W eight Designations CAUTION! Print media must be able to withstand 446°F (230°C) for 0.2 s[...]

Media Recommendations • 10 Media T ypes Pa pe r The best performance is obtained when usin g paper designed for use in copiers and laser prin ters. Suitable types include : • Hammermill ® Laser Printer Radiant W hite, 24 lb. US Bond (90 g/m²) • Xerox ® 4024, 20 lb.US Bond (75 g/m²) • Oki ® 52206101 Bright White Proofing Paper , 32 lb. [...]

Media Recommendations • 11 Envelopes • Use only recommended enve lopes (Oki 52206301 and 522063 02: see “Selecting/Using OKI Prin t Media“ in your Handy Reference Guide for more information). • Envelopes should be stored flat and away from mo isture, direct sunlight and heat sources. • Don’t use en velopes with windows or met al clasp[...]

Media Recommendations • 12 Labels • Aver y 5161 White L aser Labels (l etter size) work well with your printer . Check http://my .okidata.com for the latest inform ation on media for yo ur printer . • Use only labels designed for use in color laser printers and photocopiers. CAUTION! • Labels should cover the entire carrier sheet. • Carri[...]

Media Recommendations • 13 Media: T ray 1 and Optional T ray 2 Media Sizes: T rays 1 & 2 Feed Exit Paper size Tr a y 1 Tr a y 2 To p a a. Use the Top Exit (Face Down Stacker) only for paper up to 47 lb. US Bond (98 lb. Ind ex, 177 g/m 2 ). Rear b b. Switch to the Rear Exit (Face Up Stacker) when you are printing pa- per heavier than 47 lb. US[...]

Media Recommendations • 14 Auto Switching If you have identical paper stock loa ded in the Multi-Purpose Tray or the optional Second Paper Tray , you can have the printer automatic ally swit ch to th e other tray w hen the current tray ru ns out of paper. This function is enabled in the Print Menu. Media: Multi-Purpose T ray Use the Multi-Purpose[...]

Media Recommendations • 15 Media Sizes: Multi-Purpose T ray Feed Exit Paper size MP T ray Rear a a. Use the Rear Exit (Face Up Stacker) for heavy pape r, transparen- cies, envelopes, and l abels. To p b b. Use the Top Exit (Face Down Stacker) only for paper up to 47 lb. US Bond (98 lb. Index, 177 g /m 2 ). Letter (8½ x 1 1'') Y es Y es[...]

Media Recommendations • 16 T op Exit (F ace Down Stacker) • Holds up to 250 sheets of 20-lb. US B ond (42 lb. Index, 75 g/m² metric) stand ard pape r • Handles paper sto cks up to 47 lb. US Bond (98 lb. Index, 176 g/m² metric). • Pages are printed in reading order ( page 1 first; last p age on top, facing down). Rear Exit (F ace Up Stacke[...]

Loading Paper • 17 Loading P aper T rays 1 and 2 1. Remove the paper tray from the printer . NOTE If you have th e optiona l second pap er tray insta lled: • If you are printing from the 1st (upper) tray , you can pull out the 2nd (lower) tray and reload it while the printer is printing. • If you are printing from the 2nd (lower) tray , do no[...]

Loading Paper • 18 2. Fan the paper to be loaded at the edges ( 1 ) and in the middle ( 2 ), then tap the edges of the stack on a flat surface to make it fl ush again ( 3 ). 3. Load paper print side down, making sure the rear stopper ( 1 ) and paper guides ( 2 ) are snug against the p aper . 12 3[...]

Loading Paper • 19 4. Gently close the paper tray . NOTE Load letterhead paper face down , with the top edge aimed towards the front of the printer.[...]

Loading Paper • 20 NOTE To prevent paper jams: • Do not leave space between the paper and the guides and rear stopper . • Do not overfill the paper tray . Capacity depends o n the type of paper stock. • Do not load damaged paper . • Do not load paper of dif ferent sizes or types at the same time. • Do not pull the paper tray out dur ing[...]

Loading Paper • 21 Multi-Purpose (M P) T ray 1. Open the MP Tray . NOT E The MP Tray will ta ke a stack of media about 3/8'' (10 mm) high, equivalent to ab out 10 envelopes or 50 transparencies. Do not exceed the 3/8'' (10 mm) media stack height.[...]

Loading Paper • 22 2. Press down on the loading plat form. 3. Load the print med ia and adjust the guides ( 1 ) to the size media being used. • Letterhead stationery: – For single-sided printing, load with pre-printed side up and the top edge into the printer. – For two-sided (duplex) printing, load with pre-printed side down and top edge a[...]

Loading Paper • 23 4. Press the blue tray latch ( 1 ) towar d the p aper stack to lift the paper platform into the feed position.[...]

Menu Functions • 24 Menu F unctions This section lists the menus ac cessed via the contro ls on the printer’s operator panel and displayed in the LCD wind ow. Many of these settings can be overridden by settings in the Windo ws printer drivers. However, se veral of the dr iver settin gs can be le ft at “Printer Setting,” which will then def[...]

Menu Functions • 25 6. When the sett ing you wish to use appears on the display , pr ess ENTER . An asterisk (*) appears ne xt to the setting, and the setting flashes. 7. To f i n i s h : a. If you are t hrough making settings in the menu, press ON LI NE to engage the setting and exit the menu. b. If you wish to make additio nal changes in the me[...]

Menu Functions • 26 6. Press MENU + to change the settin g to ON: DUPLEX ON The second line of the display begin s flashing. 7. Press EN TER to select the new sett ing: DUPLEX ON * An asterisk appears on th e second line of the display. 8. Press ON LINE to engage the new setting and to exit the menu. The printer returns to st andby mode.[...]

Menu Functions • 27 Summary of Menu Defaults Menu Defaults Note: Menus/Items with a d agger ( † ) only appear when the appropriate option (e.g., Hard Disk Drive, Duplex Unit, Second Paper Tray, etc.) is installed. Menu Item Default Setting PRINT JOBS MENU † ENTER P ASSWORD **** SELECT JOB ALL JOBS INFORMA TION MENU PRINT MENU MAP [EXECUTE] PR[...]

Menu Functions • 28 EDIT SIZE CASSETTE SIZE MEDIA MENU TRA Y1 P APERSIZE LETTER TRA Y1 MEDIA TYPE PLAIN TRA Y1 MEDIAWEIGHT MEDIUM TRA Y2 P APERSIZE † LETTER TRA Y2 MEDIA TYPE † PLAIN TRA Y2 MEDIAWEIGHT † MEDIUM MP TRA Y P APERSIZE LETTER MP TRA Y MEDIA TYPE PLAIN MP TRA Y MEDIA WEIGHT MEDIUM UNIT OF MEASURE INCH X DIMENSION 8.5 INCH Y DIMEN[...]

Menu Functions • 29 K HIGHLIGHT 0 COLOR MENU (CONT.) K MID-TONE 0 K DARK 0 C DARKNESS 0 M DARKNESS 0 Y DARKNESS 0 K DARKNESS 0 AJST REGSTRA TION [E XECUTE] C REG FINE AJSTS 0 M REG FINE AJST 0 Y REG FINE AJST 0 INK SIMULA TION OFF UCR LOW CMY100% DE NSITY DISABLE CMYK CONVERSION ON SYS CONFIG MENU POW SA VE TIME 60 MIN PERSONALITY AUTO EMULA TION[...]

Menu Functions • 30 JAM RECOVERY ON ERROR REPORT OFF SYS CONFIG MENU (CONT.) LANGUAGE ENGLISH PCL EMULA TION FONT SOURCE RESIDENT FONT NO. I000 FONT PITCH 10.00 CPI FONT HEIGHT 12.00 POINT SYMBOL SET PC-8 A4 PRINT WIDTH 78 COLUMN WHITE P AGE SKIP OFF CR FUNCTION CR LF FUNCTION LF PRINT MARGIN NORMAL TRUE BLACK OFF PEN WIDTH ADJUST ON PPR EMULA TI[...]

Menu Functions • 31 LF FUNCTON LF LINE LENG TH 80 COLUMN FORM LENG TH 1 1 INCH PPR EMULA TION (CONT.) TOF POSITION 0.0 INCH LEFT MARGIN 0.0 INCH FIT TO L ETTER ENABLE TEXT HEIGHT SAME FX EMULA TION CHARACTER PITCH 10 CPI CHARACTER SET SET -2 SYMBOL SET IBM-437 LETTER O STYLE DISABLE ZERO CHARACTER NORMAL LINE PITCH 6 LPI WHITE P AGE SKIP OFF CR F[...]

Menu Functions • 32 ACK WIDTH NARROW ACK/BUSY TIMING ACK IN BUSY I-PRIME DISABLE OFFLINE RECEI VE DISABLE USB MENU USB ENABLE SOFT RESET DISABLE SPEED 480Mbps OFFLINE RECEI VE DISABLE SERIAL NUMBER ENABLE NETWORK MENU TCP/IP ENABLE NETBEUI ENABLE NETW ARE ENABLE ETHERT ALK ENABLE FRAME TYPE AUTO IP ADDRESS SET AUTO IP ADDRESS 192.168.100.100 SUBN[...]

Menu Functions • 33 HUB LINK SETTING AUTO NEGOTIA TE MEMOR Y MENU † RECEIVE BUF SIZE AUTO RESOURCE SA VE OFF FLASH INITIALIZE [EXECUTE] DISK MAINTENANCE † HDD INITIALIZE [EXECUTE] P ARTITION SIZE Not Applicable HDD FORMA TTING [EXECUTE] SYS ADJUST MENU † X ADJUST 0.00 MILLIMETER Y ADJUST 0.00 MILLIMETER DUPLEX X ADJUST 0.00 MILLIMETER DUPLE[...]

Menu Functions • 34 USAGE MENU TOT AL P AGE COUNT nnnn TRA Y1 P AGE COUNT nnnn TRA Y2 P AGE COUNT † nnnn MPT P AGE COUNT nnnn COLOR P AGE COUNT nnnn MONO P AGE COUNT nnnn K DRUM LIFE REMAINING nn% C DRUM LIFE REMAINING nn% M DRUM LIFE REMAINING nn% USAGE MENU (CONT) Y DRUM LIFE REMAINING nn% BEL T LIFE REMAINING nn% FUSER LIF E REMAINING nn% K [...]

Menu Functions • 35 Print er Menus Print Jobs Menu This menu only appears if you have the optional Hard Disk Drive installed. Item Action Explanation ENTER P ASSWORD **** Use MENU + and MENU – to enter a digit of the passwor d, then press EN TER to progress to the n ext digit. SELECT JOB NO JOBS ALL JOBS FILE NAME #1 … FILE NAME #n Select the[...]

Menu Functions • 36 Information Menu Item Action Explanation PRINT MENU MAP EXECUTE Prints th e MenuMap (menu listi ng) with current settings shown. Information about your printer is also shown at the top of each MenuMap page. PRINT FILE LIST EXECUTE Prints a listing of the files store d in the flash memory and on the optional Hard Disk Drive (se[...]

Menu Functions • 37 Print Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation COPIES 1 to 999 Enter the number of copies of a document to be printed. DUPLEX ON OFF T urns the duplex (2-sided) printing function on or off if this option is installed . P APER FEED TRAY1 TRA Y2 MP TRA Y Selects the default tray for pape[...]

Menu Functions • 38 RESOLUTION 600x1200DPI 600DPI If you don’t need 600x1200DPI resolution, switch to 600DPI to print faster , to reduce th e amount of printer memo ry and toner used. TONER SA VE MODE OFF ON Reduces the amount of toner used for imaging. T oner saving gives lighter prints but is more economical. MONO-PRINT SPEED AUTO SPEED MONO [...]

Menu Functions • 39 EDIT SIZE CASSETTE SIZE LETTER EXECUTIVE LEGAL14 LEGAL13.5 LEGAL13 A4, A5, A6, B5 CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVELOPE C5 ENVELOPE Sets the size of the printable page area to match the size of paper in use. This is not the same as the physical p aper size, which is always slightly larger . Print Menu ([...]

Menu Functions • 40 Media Menu Notes: • Factory default settings are shown in bo ld . • Menus/Items with an aste risk ( † ) only appear when the appropriate option (e.g., Hard Disk Drive, Duplex Unit, Second Paper Tray , etc.) is inst alled. Item Settings Explanation TRA Y1 P APERSIZE A4, A5, A6, B5 LEGAL14 LEGAL13.5 LEGAL13 LETTER EXECUTIV[...]

Menu Functions • 41 TRA Y2 MEDIA WEIGHT † LIGHT MEDIUM HEA VY Adjusts the printer for the weight of paper stock loaded in optional Tray 2. MPT P APERSIZE LETTER EXECUTIVE LEGAL14 LEGAL13.5 LEGAL13 A4, A5, A6, B5 CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVELOPE C5 ENVELOPE Defines the size of paper to be fed from the Multi-Purpose T[...]

Menu Functions • 42 Y -DIMENSION 5 to 3 5.5 INCH Default = 1 1 INCH Defines the length of paper defined by the “Custom” settings. Note that medi a of up to 47'' (1.2 m) in length can be fed one sheet at a time from the Mu lti-Purpose T ray- for banner printing. Media Menu (continued) Notes: • Factory default settings are shown in [...]

Menu Functions • 43 NOT E The printer automatically adjusts color bala nce and density at appropriate intervals, optimizing the printed output for bright white pape r viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings re vert to [...]

Menu Functions • 44 C HIGHLIGHT C MID-TONE C DARK M HIGHLIGHT M MID-TONE M DARK Y HIGHLIGHT Y MID-TONE Y DARK K HIGHLIGHT K MID-TONE K DARK -3 to + 3 i n increments of 1 Default = 0 Adjusts image density for each color component (cyan, magenta, yellow an d black). Normal setting is 0. See “Setting Color T uning from The Front Panel” on page 6[...]

Menu Functions • 45 CMY 100% DENSITY DISABLE ENABLE When enabled, black areas are produced using 100% C, M, an d Y instead of black. This results in a glossier finish. CMYK CONVERSION ON OFF Postscrip t emulatio n only . Switch to OFF to shorten the processing time for CMYK data. Not available when the Ink Simu lation menu item is set to a value [...]

Menu Functions • 46 Syst em Configuration Men u Note: Factory default settings ar e shown in bold . Items Settings Explanation POW SA VE TIME 5 15 30 60 240 Adjusts the time before the printer automatically switches into power saving mode. In this mode powe r consumpt ion is reduced, but when a job i s sent the printer will require a warm-up time[...]

Menu Functions • 47 WA IT TIMEOUT 5 to 300 SEC Default = 40 seconds S pe c ifies how many seconds the printer will wait when re ceived dat a pauses before forcing a page eject. In Postscript emulation mode the job will be cancelled if timeout occurs. LOW TONER CONTINUE STOP S pe c ifies whether the printer should continue printi ng after a low to[...]

Menu Functions • 48 PCL Emulation Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation FONT SOURCE RESIDENT / DIMM0 / DIMM1 / DOWNLOADED S pecifie s the location of the PCL default font. Change the setting appropriately if additional fonts are installed in the expansion ROM sl ot or additional fonts have been downloa[...]

Menu Functions • 49 SYMBOL SET PC-8 , PC-8 Dan/Nor , PC-8 TK, PC-775, PC-850, PC- 852, PC-855, PC-857 TK, PC-858, PC-866, PC-869, PC-1004, Pi Font, Plska Mazvia, PS Math, PS T ext, Roman-8, Roman-9, Roman Ext, Serbo Croat1, Serbo Croat2, S panish , Ukrainian, VN Int'l, VN Math, VN US, Win 3.0, Win 3.1 Blt, Win 3.1 Cyr , Win 3.1 Grk, Win 3.1 [...]

Menu Functions • 50 A4 PRINT WIDTH 78 COLUMN 80 COLUMN If you are printing a letter size document on an A4 size sheet, select 80 column. This condenses the print to fit on the slightly narrower A4 sheet, without changing the line breaks. WHITE P AGE SKIP OFF ON Selects whether blank pages are printed or not. CR FUNCTION CR CR+LF Selects whether a[...]

Menu Functions • 51 PP R Emulation Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation CHARACTER PITCH 10 CPI 12 CPI 17 CPI 20 CPI PROPROTIONAL S pecifies character pitch (characters per inch). FONT CONDENSE 12CPI TO 20CPI 12CPI TO 12CPI S pecifie s 12CPI pitch for Condense Mode. CHARACTER SET SET 2 SET 1 S pecifies[...]

Menu Functions • 52 SYMBOL SET IB M-437 , IBM-850, IBM-860, IBM-863, IBM-865, PC Set1, PC Ext US, PC Ext D/N, PC Set2 US, PC Set2 D/N, Roma3n-8, ISO L1, PC-8, PC-8 Dan/Nor , PC-8 50, Legal, ISO-2 IRV , ISO-4 UK, ISO-6 ASC, ISO-10 S/F , ISO-1 1 Swe, ISO-14 JASC, ISO-15 Ita , ISO-16 Por , ISO- 17 S pa, ISO-21 Ger , ISO-25 Fre, ISO-57 Chi, ISO-60 No[...]

Menu Functions • 53 ZERO CHARACTER Normal Slashed Sets the zero to be slashed or unslashed. LINE PITCH 6 LPI 8 LPI S pecifie s the line sp acing (lines per inch). WHITE PAGE SKIP OFF ON Change this setting to ON if you do not wish to print blank pag es. Not available for duplex printing. CR FUNCTION CR CR+LF Sets functionality on receipt of CR co[...]

Menu Functions • 54 FX Emulation Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation CHARACTER PITCH 10 CPI 12 CPI 17 CPI 20 CPI PROPORTIONAL S pecifies character pitch (characters per inch). CHARACTER SET Set 2 SET 1 S pecifie s which Ep son character set is used.[...]

Menu Functions • 55 SYMBOL SET IB M-437 , IBM-850, IBM- 860, IBM-863, IBM-865, PC Set1, PC Ext US, PC Ext D/ N, PC Set2 US, PC Set2 D/ N, Roman-8, ISO L1, PC-8, PC-8 Dan/Nor , PC-8 50, Legal, ISO-2 IRV , ISO-4 UK, ISO-6 ASC, ISO-10 S/F , ISO-1 1 Swe, ISO-14 JASC, ISO-15 Ita , ISO-16 Por , ISO-17 S pa, ISO-21 Ger , ISO-25 Fre, ISO-57 Chi, ISO-60 N[...]

Menu Functions • 56 ZERO CHARACTER NORMAL SLASHED Sets the zero to be slashed or unslashed. LINE PITCH 6 LPI 8 LPI S pecifie s the line sp acing (lines per inch). WHITE PAGE SKIP OFF ON Change this setting to ON if you do not wish to print blank pag es Not available for duplex printing. CR FUNCTION CR CR+LF Sets functionality on receipt of CR cod[...]

Menu Functions • 57 Par al le l Me nu Note: Factory default settings ar e shown in bold . Item Settings Explanation P ARALLEL ENABLE DISABLE Enables or disables the parallel port. BI-DIRECTION ENABLE DISABLE Enables or disables bi-d irectional functionality of the parallel port. ECP ENABLE DISABLE Enables or disables ECP mode. ACK WIDTH NARROW ME[...]

Menu Functions • 58 USB Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation USB ENABLE DISABLE Enables or disabl es operation of the USB port. SOFT RESET ENABLE DISABLE Enables or disables the SOFT RESET command. SPEED 480Mbp s 12Mbps Sets the maximum transfer speed for the USB interface. OFFLINE RECEIVE DISABLE ENA[...]

Menu Functions • 59 FRAME TYPE AUTO 802.2 802.3 ETHERNET II SNAP Selects the Ethernet MAC layer frame type. IP ADDRESS SET AUTO MANUAL Change this to Manual to specify the IP address through the front p anel.(see next entry) Required for non-DHCP networks. IP ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.100 Current assigned IP address. T o chang[...]

Menu Functions • 60 TELNET ENABLE DISABLE Enables or disables T elnet config. facility . This item will not appear in the menu if TCP/IP is set to DISABLE. FTP ENABLE DISABLE Enables or disabl es communication via FTP . This item will not appear in the menu if TCP/IP is set to DISABLE. SNMP ENABLE DISABLE Enables or disables SNMP protocol. LAN NO[...]

Menu Functions • 61 CAUTION! The Disk Maintenance Menu can be used to initialize the printer's internal hard disk dr ive, to reassign the p artition content s, or to reformat the p artitions. Unless you know what you are doing, please avoid this section of the Menu. It is recommended that disk maintenance be done through the Storage Device M[...]

Menu Functions • 62 System Adjust Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation X ADJUST -2.00MILLIMETER TO +2.00MILLIMETE R Default = 0.00 Adjusts overall print position horizontally in 0.25 increment s. Y ADJUST -2.00MILLIMETER TO +2.00MILLIMETE R Default = 0.00 Adjusts overall print position vertically in 0[...]

Menu Functions • 63 HEX DUMP [EXECUTE] Press ENTER to switch the printer to the Hexadecimal Dump mode in which all data received is printed in both Hexadecimal and ASCII format. T o return to normal print mode, switch the printer off then on again. System Adjust Menu (continued) Note: Factory default settings ar e shown in bold . Item Settings Ex[...]

Menu Functions • 64 Maintenance Menu Note: Factory default settings ar e shown in bold . Item Settings Explanation MENU RESET EXECUTE Resets menus to the default settin gs. SA VE MENU EXECUTE Saves current menu settings as default values. At confirmati on prompt, press ENTER to confirm save, or CANCEL . POWER SA VE ENABLE DISABLE Change this sett[...]

Menu Functions • 65 Usage Menu This menu is for information only, and provides an indication of total usage of the printer and the expected life le ft in its consumable items. This is particularly useful if you do not have a full set of replacement consumables on hand and you need to know how soon you will need them Item Explanation TOT AL P AGE [...]

Menu Functions • 66 Setting Color T uning from T he F ront Panel You can use the printe r’s menu to adjust the color intensity for a specific color by adju sting t he HIGHLIGHT, MID-TONE and DARK (shadows) Color Tuning Pattern s. • To increase the color intens ity , use a higher positive setting (default = 0, maximum = +3). • To decrea se t[...]

Menu Functions • 67 1. Print the Color T uning Pattern: a. Make sure letter-size pape r is loaded in the tray. b. Press + repeatedly, until you see COLOR MENU c. Press ENTER . d. Press + one or more times, until you see COLOR TUNING PRINT PATTERN e. Press ENTER . The Color Tuning Pattern prints an d the display reads. C HIGHLIGHT 0*[...]

Menu Functions • 68 2. Adjust the Cyan highlight co lor . a. Press ENTER to select the Cyan Highlight item. The second line of the display begin s flashing. b. Press + one or more times, until the new value you wish to use displays (e.g., +3). c. Press ENTER , to select the new value. An asterisk (*) appears at th e right of the new selection. d.[...]

Menu Functions • 69 4. Adjust the Cyan dark color: a. Press ENTER to select the Cyan Dark item. The second line of the display begin s flashing. b. Press + one or more times, until the new value you wish to use displays (e.g., +3). c. Press ENTER , to select the new value. An asterisk (*) appears at th e right of the new selection. d. Press BACK [...]

Replacing Consumables • 70 Replacing Consumables • T oner Cartridge — Life expectancy approxim ately 3,000 pages for standard car tridges, 5,000 p ages for high-cap acity cartridges, assuming about 5% coverage, which means that 5% of the addressable dot s in an image ar e printed with this color of toner . See “T oner Cartridge Replacement?[...]

Replacing Consumables • 71 T oner Car tridge Replacement REPLACE TONER nnn : ZZZZ TONER EMPTY * nnn: ZZZZ = 410: YELLOW 41 1: MAGENT A 412: CY AN 413: BLACK Ty p e To n e r C o l o r O k i O r d e r # S tandard Black, 42804504 Cyan 42804503 Magenta 42804502 Y ellow 428045 01 High Capacity Black 42127404 Cyan 42127403 Magenta 42127402 Y ellow 4212[...]

Replacing Consumables • 72 1. Press the cover release and open the printer ’s top cover fully . WAR NI NG ! If the printer has been power ed on, the fuser is hot. This area is clearly labelled. Do not touch.[...]

Replacing Consumables • 73 2. Note the positions of the four cartridges: Cyan ( 1 ), Magenta ( 2 ), Ye l l o w ( 3 ), Black ( 4 ): 3. Pull the colored toner release lever on the cartridge to be replaced (here we are showin g replacement of the black toner cartridge) towards the front of the printer . 4. Lift the right-hand end of the cartridge an[...]

Replacing Consumables • 74 toner cartridge and discard it in accordance with your local regulations. 5. Unpack the new toner cart ridge and gently shake it from side to side to loosen and distribute the toner evenly inside the cartr i dge.[...]

Replacing Consumables • 75 6. Remove the adhesive tape from the underside of the cartridge.[...]

Replacing Consumables • 76 7. Holding the cartrid ge by it s top center with the colored rele ase lever to the right, inser t the lef t end of th e cartridge into the top of the image drum, pushing it firmly against the spring on the drum unit. CAUTION! Do not touch the toner rel ease lever until the toner cartridge is installed in the image drum[...]

Replacing Consumables • 77 8. Lower the right end of the cartridge into the image drum unit, pressing it firmly down in place, then pu sh the colore d lock lever back to open the toner slot and lock it in place. Impor tant! The lever should move easily. If it does not, ST OP! and push down on the toner cartridge to be sure that it is properly sea[...]

Replacing Consumables • 78 9. Gently wipe the corresponding LED he ad surface with the LED lens cleaner supplied with the toner cartridge. 10. Close and latch the top cover .[...]

Replacing Consumables • 79 Image Drum Replacement REPLACE IMAGE DRUM nnn : ZZZZ DRUM LIFE * nnn: ZZZZ = 350: YELLOW 351: MAGENT A 352: CY AN 353: BLACK 1. Place two sheets of pa per on your working surface to protect it. Y ou will put the image drum and toner cartridge on the paper while replacing them. Drum Colo r O ki Order # Black 42126604 Cya[...]

Replacing Consumables • 80 2. Press the cover release and open the top cover fully . WARNING! If the printer has been power ed on, the fuser is hot. This area is clearly labelled. Do not touch it.[...]

Replacing Consumables • 81 3. Note the positions of the four image drums: Cyan ( 1 ), Magenta ( 2 ), Y ellow ( 3 ), Black ( 4 ): 4. Lift the image drum, complete with its toner cartridge, out of the printer and put it down on one of the sheets of paper .[...]

Replacing Consumables • 82 5. With the colored toner release lever ( 1 ) to the ri ght, pull the lever towards you. This will release the bond between the toner cartridge and th e image drum. 6. Lift the right-hand end of the toner cartridge, move the cartridge to the right, and remove the tone r cartridge from the image drum. Place the toner car[...]

Replacing Consumables • 83 8. Unpack the new image drum. CAUTION! Image drum handling: The image drum contains toner . T o avoid spilling toner , be careful to keep it upright .[...]

Replacing Consumables • 84 9. Grasp the white tape t ab and peel the tape off the drum. 10. Remove the paper sheet, then the clear plastic film.[...]

Replacing Consumables • 85 11. If present, remove the silica gel pack. 12. Place the image drum in the printer .[...]

Replacing Consumables • 86 13. Remove the orange drum seal. 14. Install the toner cartridg e in the image drum.[...]

Replacing Consumables • 87 15. Push back the tone r cartridge lock lever . 16. Gently wipe the corresponding LE D with a lens cleaner pad or a sof t cloth. 17. Close and latch the top cover .[...]

Replacing Consumables • 88 Belt Unit Replacement O k i 4 2 15 8711 REPLACE BEL T 355: BELT LIFE The belt unit is located under t he four image drums. This unit requires replacement app ro ximately every 50,000 pages. 1. Press the cover release and open the top cover fully . WARNING! If the printer has been power ed on, the fuser is hot. This area[...]

Replacing Consumables • 89 2. Note the positions of the four image drums: Cyan ( 1 ), Magenta ( 2 ), Y ellow ( 3 ), Black ( 4 ). It is esse ntial that they go back in the correct order! 3. Lift each of the image drum units out of the printer and place them on a flat surface in a s afe plac e away from di rect sour ces of heat and light. CAUTION! [...]

Replacing Consumables • 90 4. Locate the two blue locks ( 1 ) and the handle ( 2 ). 5. T urn the two locks about 45° counter clockwise to relea se the belt.[...]

Replacing Consumables • 91 6. Pull up the handle and lift the belt unit out of the printer . 7. Unpack the new belt unit and hold it with the blue handle toward the front of the printer . 8. Place the drive gear at the back of the belt unit in th e gear at the left rear corner of the printer , and lower the belt unit into th e printer .[...]

Replacing Consumables • 92 9. T u rn the two belt locks about 45° clockwise to secure the belt unit in place. 10. Place the four image drums/toner ca rtridg es back in the printer ( 1 = Cyan, 2 = Magenta, 3 = Y ellow , 4 = Black):[...]

Replacing Consumables • 93 11. Close and latch the top cover .[...]

Replacing Consumables • 94 F user Replacement O ki 4 2625501 ( 1 20V ) O ki 4 262550 2 (230 V ) REPLACE FUSER 354: FUSER LIFE WARNING! If the printer has recently been powered on, some fuser components will be very hot. Handle the fuser with extreme care, holding it only by its handl e, which will only be mildly warm to the touch. A warning label[...]

Replacing Consumables • 95 1. Press the cover release and open the printer ’s top cover fully . 2. Pull the two blue fuser lock levers ( 1 ) towards the front of t he printer .[...]

Replacing Consumables • 96 3. Holding the fuser by its handle , lift the fuser out of the printer . If the fuser is still warm, place it on a flat surface which will not be damaged by heat . After letting the fuser c ool down, discard it. 4. Remove the new fuser from its p ackaging, then remove any packing t ape. 5. Push the orange tr ansport loc[...]

Replacing Consumables • 97 6. Holding the new fuser by the han dle, with the fuser pressure release leve r ( 1 ) on the right, lower the fuser into the printer . 7. Push the two blue retaining levers ( 1 ) toward the rear of the printer to lock the fuser in place.[...]

Replacing Consumables • 98 8. Close and latch the top cover .[...]

Clearing Paper Jams • 99 Clearing P aper Jams Jams can occur due to pape r misfeeding from a paper tray or at any point along the paper path. When a jam occurs, the printer immediately stops, and th e LCD display indicates the area where the first sheet is jammed. All jammed sheets must be removed in order to restore the printer to normal operati[...]

Clearing Paper Jams • 100 Jam 3 82 OPEN TOP COVER 382: PAPER JAM 1. Open the top cover . 2. Gently pull the sheet out. • If the sheet does not come out easily , go to the n ext step. • If the sheet does come out, close the cover . 3. Lower the rear exit tray .[...]

Clearing Paper Jams • 101 4. Pull out the jammed sheet. Important! W ARNING! The fus e r may be HOT! If the sheet is difficult to remove, it is partially ja mmed in the fuser. To get it out, reach around the top cover and press down on the fuser pressu re release lever ( 1 ) before pulling th e sheet out. Then let go of the fuser pressure release[...]

Clearing Paper Jams • 102 5. Close the rear exit. 6. Close the top cover .[...]

Clearing Paper Jams • 103 Jam 3 8 1 OPEN T OP COVER 381: PAPER JAM 1. Press the cover release and open the printer ’s top cover fully .[...]

Clearing Paper Jams • 104 2. Note the positions of the four image drums: Cyan ( 1 ), Magenta ( 2 ), Y ellow ( 3 ), Black ( 4 ). It is essential that they go back in the correct order! WARNING! If the printer has been power ed on, the fuser is hot. This area is clearly labelled. Do not touch it.[...]

Clearing Paper Jams • 105 3. Lift each of the image drum/toner ca rtridge units out of th e printer and place them on a flat surface in a safe place away from direct sources of heat and light . CAUTION! The green surface at the base of each image drum is very delicate and light sensitive. • Do not touch the green surface. • Never expose the d[...]

Clearing Paper Jams • 106 4. Remove any sheets of paper on the belt unit. CAUTION! Do not use any sharp or abrasive object s to separate sheet s from the belt. This may damage the belt surface.[...]

Clearing Paper Jams • 107 NOT E Warning! If the printer has been printing, the fuser will be HOT ! To remove a sheet trapp ed in the fuser, grasp the edge of the sheet, push the fuser pressure release lever (1) towards the front and dow n, and lift out the sheet. Then let go of the fuser pr essure rele ase lever. If the sheet is well advanced int[...]

Clearing Paper Jams • 108 5. Place the four image drums/toner ca rtridges ba ck in the printer , being careful to place them in th e proper sequence ( 1 = Cyan, 2 = Magenta, 3 = Y ellow , 4 = Black): 6. Close the top cover .[...]

Clearing Paper Jams • 109 Jam 3 7 2 and 3 80 OPEN FRONT COVER nnn : PAPER JAM nnn = 372 or 380. 1. Lift the front cover release and pull open the front cover . 2. Remove any jammed sheets.[...]

Clearing Paper Jams • 110 3. Close the front cover .[...]

Clearing Paper Jams • 111 Jam 3 7 0, 3 7 3 and 383 OPEN DUPLEX COVER nnn: PAPER JAM nnn = 370, 373, 383 1. Press the duplex cover rele ase and open the duplexer cover .[...]

Clearing Paper Jams • 112 2. Remove any jammed sheets.[...]

Clearing Paper Jams • 113 3. Close the duplex unit cover . Jam 3 7 1 OPEN DUPLEX COVER 371: PAPER JAM 1. T u rn of f th e printer . 2. Pull out the duplexer .[...]

Clearing Paper Jams • 114 3. Pull the duplexer lid to unlock it. 4. Open the lid and r emove the jammed sheet.[...]

Clearing Paper Jams • 115 5. Close the lid and push it bac k t o lock it in place. 6. Push the duplexer back into the printer . 7. T u rn on the printer[...]

Clearing Paper Jams • 116 Ja m 39 1 an d 39 2 OPEN FRONT COVER nnn: PAPER JAM OPEN FRONT COVER 392: PAPER JAM 1. Pull out the appropriate tray (391 = Tray 1, 392 = Optional T ray 2) and remove any sheet jammed as it exited the tray . 392 391[...]

Clearing Paper Jams • 117 2. Open the front cove r . 3. Remove any jammed sheets. 4. Close the front cover .[...]

Clearing Paper Jams • 118 Jam 3 90 CHECK MP T RAY 390: PAPER JAM If the Sheet Has Just Begun to Ent er the Printer 1. Gently pull the sheet out of the printer . If the Sheet Can’t Easily Be Pulled Out from the F ront 1. Lift the front cover release and pull open the front cover .[...]

Clearing Paper Jams • 119 2. Remove any jammed sheets. 3. Close the front cover .[...]

Troubleshooting • 120 T roubleshooting L CD messages Message Meaning What to Do * T ONER SENSOR ERROR F lashes across the second lin e of the display: the indi cated color toner (*) is missing from the printer . Open the top cover and make sur e the indicated toner is there and properly seated in the printer: C = Cyan, Y = Y ellow , M = Magenta, [...]

Troubleshooting • 121 CHECK BEL T 330: BEL T MISSING The belt unit is not properly installed. Open the top cover and lift out the black (K) and Y ellow (Y) image drums, placing them on a flat surface. Check to be sure that the belt unit latches are fully in the latched position: then reinstall the image drums. CHECK FUSER 320: FUSER MISSING The f[...]

Troubleshooting • 122 CLOSE COVER 316: DUPLEX COVER OPEN The duplex cover is open or not properly latched. Close the duplex cover: CLOSE COVER nnn : COVER OPEN Either the top cover or the front cover is open. Be sure both the top cover and the front cover are firmly closed. HARD DISK FULL The optional ha rd disk drive ha s no more memory availabl[...]

Troubleshooting • 123 LOAD mmm nnn : tttt EMPTY A print job has been received and the indicated paper tray is empty . Load mmm media in the indicated (tttt) tray . LOAD mmm / ppp AND PRESS ONLINE SW ITCH nnn : tttt MEDIA MISMATCH The media type in the indicated tray (tttt) does not match that specified in the print job being processed. Load the a[...]

Troubleshooting • 124 PRESS ONLINE SW INVALID DATA The printer has received invalid data. Press ON-LINE . Reprocess and resend the print job. PS3 EMULATION ERROR Applies to Postscript emulation only . An error occurred or virtual memory was used up. Reprocess and resend the job to the printer . T ry reducing the size of the print file being sent.[...]

Troubleshooting • 125 YYYY nnn : FATAL ERROR An error has occurred which requires service. YYYY = the general cause. nnn = error number . Write down the message includi ng the error number “nnn,” then call your authorized Oki Data Service Dealer for service. Note : If you see a series of octets containing letters and numbers scrolling across [...]

Troubleshooting • 126 Problem Solving Problems Printing If paper jams are frequent: • More than one sheet feed s at a time. • Paper curls. • Paper feeds at an an gle. Pap er jam has been cleared , but print er does not print. Possible cause Remedy The printer is not horizontal. Place the printer on a stable, level surface. The paper is too [...]

Troubleshooting • 127 Application er ror or ge neral prot ection fault is displayed. Possible cause Remedy Application is not suitable for operating system. Upgrade the application. Memory is insufficient for number of applications running. Close all other applications. Print file is corrupted. Correct or recreate the file. Memory is insufficient[...]

Troubleshooting • 128 Printing is slow . Printer requests paper size change to continue printing. The power is on, but the p rint er does not go online. Print processing does n ot start. Print processing ca ncels. Possible cause Remedy Print resolution is set high. Set lower print resolution in the printer d6 Data is too complex. Simplify data. P[...]

Troubleshooting • 129 Comput er Int erf ace Problems Cannot configure for par allel connection. Possible cause Remedy The computer does not support bi-directional parallel interface. There is no fix fo r this problem. Y ou should only use a computer that does support a bi-directional parallel interface. Parallel cable does not meet specifications[...]

Troubleshooting • 130 Cannot configure for USB connection. NOTE Windows 95 and NT 4.0 do n ot support USB; Windows 98 upgraded from Windows 95 may not support USB. Possible cause Remedy USB cable does not meet specifications. Use USB cable to specification V er .1.1. Interface is di sabled. Check that USB interface is set to Enable in the menu ( [...]

Troubleshooting • 131 Printout is garbled or incorr ect with pa rallel connecti on. Cannot print. • LPT WRITE ERR OR is displayed. • PRNUSBX WRIT E ERROR is displayed. Possible cause Remedy Possible mismatch on parallel connection between computer and printer . Change parallel transmission mode (see “Problem Solving” on page 12 6). Possib[...]

Troubleshooting • 132 Print Quality Problems Longitudinal whit e stripes Longitudinal fading Faint printing Fading in patches Remedy Clean LED head with lens cleaner or soft tissue. Change toner cartridge. Change image drum. Possible cause Re medy LED head is dirty . Clean LED head with lens cleane r or sof t tissue. T oner is low . Chang e toner[...]

Troubleshooting • 133 Longitudinal black s tripes Fain t shading on unp rint ed sections Possible cause Remedy Image drum is damaged. Replace image drum (see “Image Drum Replacement” on page 79). T oner is low . Change toner cartridge (see “T on er Cartridge Replacement” on page 72). Periodic black lateral lines or spot s. • If the lin [...]

Troubleshooting • 134 Blurred lett er edges One side of print ed page s appears blu rred T oner rubs off when you rub the pr int ed surface. Possible cause Remedy LED is dirty . Clean LED with lens cleaner or soft tissue. Cannot prin t desired color because toner is low . Replace toner cartri dge (see “T on er Cartridge Replacement” on page 7[...]

Troubleshooting • 135 Miscellaneous Problems Print er makes a strange noise. Printer takes a long ti me to start printing. Possible cause Remedy The printer is not horizontal. Place the printer on a stable, level surface. There are scraps of paper or other foreign matter inside the printer . Check the inside of the printer and remove any such obj[...]

Troubleshooting • 136 P arallel T ransmission Mode: W indows Only The parallel port supports IEEE-1284 and EC P mode. If your computer's parallel port is n ot comp atible with one of these modes, the printer may not print at all or it may print corrupted data. To correct for this, enter the printer' s Parallel Menu and change the ECP se[...]

Options • 137 Options The following options are available for your printer: • Additional RAM memory (see below) • Second Paper Tray (see page 138) • Duplex Unit, for two sided printing (see page 139) • 20 GB Hard Disk Drive (see page 140) Instructions for installing these opt ions are found in the packaging with th e option . R AM Memory [...]

Options • 138 Second P aper T ray (Oki 421 5851 1) The second paper tray take s: • Up to 530 sheets of 20- lb. paper . • All the same size media as T ray 1 except A6. • Paper weight range 16 to 47 lbs. US Bond (33 to 98 lbs Index, 60 to 177 g/m 2 metric).[...]

Options • 139 Duplex Unit ( O k i 4 215 8 411 ) The duplex unit ad ds the function of two sided prin ting and enables booklet printing. The duplex unit slides straight into the rear of the printer and requires no tools to install. The duplex unit handles: • Paper sizes letter , lega l-14, legal-13.5, legal- 13, A4, A5, B5, and custom (width 5.8[...]

Options • 140 Hard Disk Drive (Oki 7 00435 0 1) The Hard Disk Drive plugs into t he printer’s main circuit board and provides 20 GB of space. It is hi ghly recommended if you plan to use the printer’s Proof and Print o r Secure Print features. It is required • If you wish to use the printer ’ s S tore to Hard Disk Drive feature. • If yo[...]

Specifications • 141 Specifications Item Specification Dimensions 16.61'' W x 22.0 9'' D x 13.58'' H (422 mm W x 561 mm D x 345 mm H) Net Weight 57.3 lbs. (26 Kg) Print speeds 16 pages per minute (ppm) color 24 ppm monochrome Resolution 600 dpi or 600 x 1200 dpi Emulations Post script 3 emulation PCL 5c Epson FX IBM [...]

Specifications • 142 Paper weight Range Tr a y 1 : 17 to 32 lb. (64 to120 g/m²) Optional T r ay 2 : 17 to 47 lb. (64 to 177 g/m²) Multi-Purpose T ray : 20 to 54 lb. (75 to 203 g/m²) Paper output T op Exit (Face Down S tacker): 250 sheets 20-lb. 75 g/m² paper Rear Exit (Face Up S tacker): 100 sheets 20-lb. 75 g/m² Printer life 420,000 p ages [...]

Windows: Black Printing • 143 W indows Black Printing _________________ Normally, the printer will print black using all four toner colors. If you are doing a lot of black-only printing, you ca n set the printer to use only blac k toner. T o Select Black Printing for a P articular Job in the PCL Driver: Click Grayscale on the driver’s Color tab[...]

Windows: Black Printing • 144 T o Select Black Pr inting as T he Default in the PCL Driver: 1. Click Start → Settings → Printer s [ Printers and Faxe s in Windows XP]. 2. Right-click the printer name and: a. Windows 98/Me : select Properties , then click Printer Pro perties . b. Windows 2000/XP : select Properties , then click Printing Prefer[...]

Windows: Color Printing • 145 Color Printing _________________ The printer drivers supplied with this pr inter provide several controls for changing the color output of your printer. For gen eral use the Auto settings will suffi ce, providing reasonable default settings that will produce good result s for most documents. Many applications have th[...]

Windows: Color Printing • 146 Viewing conditi ons A print can look very different under different lig hting conditions. For example, the colors in a print may loo k different when viewed standing next to a sunlit window, co mpared to how they look under standard office fluorescent lighting. Printer driver color settings The driver settings for Ma[...]

Windows: Color Printing • 147 How Y our Software App lication Displays Color Some graphics applica tions such as CorelDRAW ® or Adobe ® Photoshop ® may display color differently from "office" applications such as Microsoft ® Word. Please see you r application’s on-line help or user manual for more information. Pap er T yp e The ty[...]

Windows: Color Printing • 148 Choosing a Color Matching Method There is no correct way to achie ve a good match between the document displayed on your mo nito r, and its printed equivalent. There are many factors involved in achieving accurate and reproducible color. The following guidelines may help in achievin g good color output from your prin[...]

Windows: Color Printing • 149 RGB or CMYK If you are printing photogr aphic images from a graphics application such as Adobe Photo s hop, you ma y be able to use Soft-Proofing to simulate the printed image on your monitor. To do this, you can use the ICC-Profiles provided by Oki, and then print using the ICC profiles as the Print Space (or Outp u[...]

Windows: Color Printing • 150 Color matching: P ostscript emulation driver The Postscript emulation driver color matching options ar e found: • Windows 98 and Me: on the Graphics tab in the driver: NOTE Model C5400n only.[...]

Windows: Color Printing • 151 • Windows 2000, XP and NT 4.0: on the Color t ab in the driver: T o change the Postscript emul ation driver’ s color matching defaults from th e W indows Control Panel: 1. Click Start → Settings → Printer s [ Printers and Faxe s in Windows XP]. 2. Right-click the printer name and choose Propertie s . 3. Click[...]

Windows: Color Printing • 152 Color Matching Option s: W indows Me and 98 The Graphics tab on the Postscri p t emulation driver in thes e Windows operating systems offers several rende ring intents for controlling the color output of the pr inter. When a documen t is printed, a conversion takes place from the document’s color to the printer col[...]

Windows: Color Printing • 153 Color Matching Options: Wi ndows 2 000, XP and NT 4.0 The Color tab on the Postscr ipt emulat ion driver in th ese Windows operating systems offers several diff erent metho ds of controlling the color output of the printer. Some of the color matching optio n s only work on certain types of data. The table below summa[...]

Windows: Color Printing • 154 Monitor (9300k) Optimized for printing photographs when using a monitor with a color temperatur e of 6500K. Digital Camera Optimized for printing photographs taken with a digital camera. This tends to produce prints with lighter and brighter colors. For some photographs, other settings may be better depending on the [...]

Windows: Color Printing • 155 • Absolute Colorimetric Best for printing solid colors and tints, such as Company logos etc. Matches colors common to both devices ex actly, and clips the out of gamut colors to their nearest pr inted equivalent. Tries to print white as it appears on screen. The white of a monitor is often very different from paper[...]

Windows: Color Printing • 156 4. Under “Color Profiles curren tly associated with this printer ,” you should see the names of profiles that match your printer mo del. If you do not see any profiles associated with the driver , click “Add…” and locate the ICC profiles for your printer . Windows ICM uses the information in these profiles [...]

Windows: Color Printing • 157 Color Matching: PCL Driver Color Matching Options The Color Matching option s in the PCL driver can be used to help match your printed colors to the ones displayed on your monitor. The PCL driver color matching opti ons are found on the Color tab in the driver: NOT E The PCL driver’s color options are only designed[...]

Windows: Color Printing • 158 To set th e color ma tching op tions manually, click Manual Color. The Color tab screen will change to: Choose from the following op tions: • Monitor (6500k ) Perceptual Optimized for printing daylight photo graphs. • Monitor (6500k ) V ivid Optimized for printing bright colors. Good for office graphics. • Moni[...]

Windows: Color Printing • 159 T o change the PCL driver’s color matching defaults from the Wi ndows Control P anel: 1. Click Start → Settings → Printer s [ Printers and Faxe s in Windows XP]. 2. Right-click the printer name and choose Propertie s . 3. Click Printing Prefere nces . 4. Click the Color tab and make your changes. T o chan ge th[...]

Windows: PCL Emulat ion Driver • 160 T he Print Color Swatch Utility For use with applications which allow you to set your own RGB values for colors . The Color Swatch utility prints out charts of sample colors. Listed below each color are the corresponding RGB (Red, Green, Blu e) values to use in your applicat ion to match th at printed color: F[...]

Windows: PCL Emulat ion Driver • 161 W indows 98 / Me / XP / NT 4.0 • N-up Printing: multiple pag es on one sheet (see p age 162) • Custom Page Siz es (see page 163) • Selecting Print Resolu tion (see p age 166) • Duplex Printing (see pag e 168) • W aterma rks (see p age 172 ) • Collating (see page 174) • Proof and Print (see p age [...]

Windows: PCL Emulat ion Driver • 162 N-Up Printing (Printing Mu ltiple P ages on One Sheet) 98 / Me / XP / NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dia log box, select the PCL printer , then: a. Windows 98 / Me / NT4.0: click Propert ies . b. Windows XP: click Preferences . 3. On the Setup tab, unde[...]

Windows: PCL Emulat ion Driver • 163 Printing custom P age Sizes 98 / Me / XP / NT 4.0 The printer media size fo r the tray you’re using must be manually set in the driver to the custom paper size before use (range 3½'' to 8½'' [89 to 216 mm] wide x 5'' to 14'' [127 to 356 mm] long). 1. Make sure the re[...]

Windows: PCL Emulat ion Driver • 164 5. On the Setup tab, under Media , select User Define d Size in the Size drop-dow n list. Define the custo m size in the dialog box which appears, then click OK . NOT E You may s ee a War n i ng dialog box indicating a conflict. If you do, click OK and the driver will automatically make the nee ded changes to [...]

Windows: PCL Emulat ion Driver • 165 6. User Defined Size appears in the Size list. 7. Select the tray you will be using in the Source drop-down list under Media , then click OK . 8. Windows 98 / Me / NT4.0: click OK . Windows XP: click Print . NO TE To save the setti ng for future use: • Click Paper Feed Options , then clic k Custom Siz e . ?[...]

Windows: PCL Emulat ion Driver • 166 Chang ing the Resoluti on for A Print Job 98 / Me / XP / NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer , then: a. Windows 98 / Me / NT4.0: click Propert ies . b. Windows XP: click Preferences . NOT E These instructions explain how to[...]

Windows: PCL Emulat ion Driver • 167 3. On the Job Options tab, select the require d printing resolution under Qual ity : • Fine = high resolution, slower speed: ch oose this one for opti- mum results when printing graphics. • Normal = medium resolution, medium speed: the default. • Fast = low resolution, fast speed: choose this one for dra[...]

Windows: PCL Emulat ion Driver • 168 Duplex Printing (Printing on Both Sides of The P aper) 98 / Me / XP / NT 4.0 • Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m²) . • Paper must be loaded print side up . • Any tray (T ray 1, optional T ray 2, MP tray) can be used for duplex printing. 1. Open the file in your application and selec[...]

Windows: PCL Emulat ion Driver • 169 3. On the Setup tab, under 2-Sided Printing , select Long Edge or Short Edge . 4. Click OK . 5. Windows 98 / Me / NT4.0: click OK . Windows XP: click Print .[...]

Windows: PCL Emulat ion Driver • 170 Printing Booklets 98 / Me / XP / NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer , then: a. Windows 98 / Me / NT4.0: click Propert ies . b. Windows XP: click Preferences . NOT ES • Y ou must have the duplex u nit inst alled and enabl[...]

Windows: PCL Emulat ion Driver • 171 3. On the Setup tab, under Finishing Mode , select Booklet in the drop-dow n list. 4. Click Options , enter your settings, and click OK . 5. Click OK . 6. Windows 98 / Me / NT4.0: click OK . Windows XP: click Print .[...]

Windows: PCL Emulat ion Driver • 172 Printing W atermarks 98 / Me / XP / NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer , then: a. Windows 98 / Me / NT4.0: click Propert ies . b. Windows XP: click Preferences . 3. On the Job Options tab, cli ck Watermark . 4. Select a na[...]

Windows: PCL Emulat ion Driver • 173 5. If you wish to print the watermark only on the first page of the document, select First Page only . 6. Click OK twice. 7. Windows 98 / Me / NT4.0: click OK . Windows XP: click Print . NOTE To create a new watermark or ed it an existing watermark: • Click the New or Edit button. • Enter the text fo r the[...]

Windows: PCL Emulat ion Driver • 174 Collating 98 / Me / XP / NT 4.0 Collating can be carried out with or without a hard disk drive installed. However, printers with a hard disk drive w ill provide greater performance. The following instructions explain how to select collating using the printer driver. 1. Open the file in your application and sel[...]

Windows: PCL Emulat ion Driver • 175 3. On the Job Options tab, under Job T ype , enter the number of copies required and select Collate . 4. Click OK . 5. Windows 98 / Me / NT4.0: click OK . Windows XP: click Print .[...]

Windows: PCL Emulat ion Driver • 176 Proof and Print 98 / Me / XP / NT 4.0 Proof and print allows printing of a single copy of a documen t for checking before printing multiple copies of the same document. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer , then: a. Windows 98 / M[...]

Windows: PCL Emulat ion Driver • 177 3. On the Job Options tab, under Job T ype , select Proof and Print . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . (If no dialog box appears, click PIN .) 5. Enter the number o f copies and select Co llate , if applicable, then click OK . 6. Windows 9[...]

Windows: PCL Emulat ion Driver • 178 Printing T he Additional Copie s 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of[...]

Windows: PCL Emulat ion Driver • 179 Deleting T he Document If the proof is not rea dy for printi ng, the job must be deleted fro m the printer: 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number an[...]

Windows: PCL Emulat ion Driver • 180 7. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting the remaining copies of the doc ument is to use the Storage Device Manager. Ple ase refer to the On-line help for Storage Device Ma nager.[...]

Windows: PCL Emulat ion Driver • 181 Secure Printing (Printing Confidential Documents) 98 / Me / XP / NT 4.0 Secure printing or printing with passwords allows the prin ting of confidential documents on printer s that are shared with other users. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click t[...]

Windows: PCL Emulat ion Driver • 182 3. On the Job Options t ab, under Job T y pe , select Secure Print . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . If no dialog box appears, click PIN .) 5. Enter the number o f copies and select Co llate , if applicable, then click OK . 6. Windows 98 [...]

Windows: PCL Emulat ion Driver • 183 Printing A Confi dential Document fr om The Fr ont P anel 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. [...]

Windows: PCL Emulat ion Driver • 184 Deleting T he Confiden tial Do cument Before Printing It 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. R[...]

Windows: PCL Emulat ion Driver • 185 7. Press ENTER to delete the job, then press ON LINE . NOTE An alternative method o f printing or deleting the document is to use the Storage Device Manager. Please refer to the On-line help for Storage Device Manager.[...]

Windows: PCL Emulat ion Driver • 186 Store to Hard Disk 98 / Me / XP / NT 4.0 Store to hard disk (job spooling) a llows print jobs to be prepared and stored on the hard disk for printi n g on demand. This is good for forms, generic memos, letterhead stationery, etc. 1. Open the file in your application and select File → Pr int . 2. In the Print[...]

Windows: PCL Emulat ion Driver • 187 3. On the Job Options t ab, under Job T y pe , select Store t o HD D . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . (If no dialog box appears, click PIN .) 5. Enter the number o f copies and select Co llate , if applicable, then click OK . 6. Windows [...]

Windows: PCL Emulat ion Driver • 188 T o Print A Store d Document 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the[...]

Windows: PCL Emulat ion Driver • 189 T o Delete A Stored Doc ument from T he Hard Disk Drive 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Re[...]

Windows: PCL Emulat ion Driver • 190 7. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting the remaining copies of the doc ument is to use the Storage Device Manager. Ple ase refer to the On-line help for Storage Device Ma nager.[...]

Windows: PCL Emulat ion Driver • 191 Printing P o st ers 98 / Me / XP / NT 4.0 This option allows you to con figure and print posters by breaking up the document page into multiple pieces which print enlarged on separate sheets. Then the separate sheets are combined to produce a poster. It is only available with the PCL printer driver 1. Open the[...]

Windows: PCL Emulat ion Driver • 192 W indows 2 000 • N-up Printing: multiple pag es on one sheet (see p age 193) • Custom Page Siz es (see page 194) • Selecting Print Resolu tion (see p age 197) • Duplex Printing (see pag e 199) • W aterma rks (see p age 202 ) • Collating (see page 204) • Proof and Print (see p age 205) • Secure [...]

Windows: PCL Emulat ion Driver • 193 N-Up Printing (Printing Mu ltiple P ages on One Sheet) 20 00 1. Open the file in your application and select File → Pr int . 2. In the Print dia log box, select the PCL printer . 3. On the Setup tab, under Finishing Mode ( 1 ), select the required number of pages per sheet in the drop-down list. T o set addi[...]

Windows: PCL Emulat ion Driver • 194 Printing Custom P age Sizes 20 00 The printer media size fo r the tray you’re using must be manually set in the driver to the custom paper size before use (range 3½'' to 8½'' [89 to 216 mm] wide x 5'' to 14'' [127 to 356 mm] long). 1. Make sure the rear exit p ath is[...]

Windows: PCL Emulat ion Driver • 195 5. On the Setup tab, under Media , select User Define d Size in the Size drop-dow n list. Define the custo m size in the dialog box which appears, then click OK . NOT E You may s ee a War n i ng dialog box indicating a conflict. If you do, click OK and the driver will automatically make the nee ded changes to [...]

Windows: PCL Emulat ion Driver • 196 6. User Defined Size now appears in the Size list. 7. Select the tray you will be using in the Source drop-down list under Media , then click OK . 8. Click Print . NO TE To save the setti ng for future use: • Click Paper Feed Options , then clic k Custom Siz e . • Select the unit, then enter the relevant i[...]

Windows: PCL Emulat ion Driver • 197 Chang ing the Resoluti on for A Print Job 20 00 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer . NOT E These instructions explain how to change the settings as you are printing a job. If you wish to change the settings to apply to al l jobs [...]

Windows: PCL Emulat ion Driver • 198 3. On the Job Options tab, select the require d printing resolution under Qual ity : • Fine = high resolution, slower speed: ch oose this one for opti- mum results when printing graphics. • Normal = medium resolution, medium speed: the default. • Fast = low resolution, fast speed: choose this one for dra[...]

Windows: PCL Emulat ion Driver • 199 Duplex Printing (Printing on Both Sides of The P aper) 20 00 • Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m²) . • Paper must be loaded print side up . • Any tray (T ray 1, optional T ray 2, MP tray) can be used for duplex printing. 1. Open the file in your application and select File → Pr in[...]

Windows: PCL Emulat ion Driver • 200 3. On the Setup tab, under 2-Sided Printing , select Long Edge or Short Edge . 4. Click Print .[...]

Windows: PCL Emulat ion Driver • 201 Printing Booklets 20 00 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer . 3. On the Setup tab, under Finishing Mode , select Booklet in the drop-dow n list. 4. Click Options , enter your settings, and click OK . 5. Click Print . NOTES • Y o[...]

Windows: PCL Emulat ion Driver • 202 Printing W atermarks 20 00 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer . 3. On the Job Options tab, cli ck Watermark . 4. Select a name from the W atermark list or click New to set up a new watermark. When you’re finished setting up the[...]

Windows: PCL Emulat ion Driver • 203 5. If you wish to print the watermark only on the first page of the document, select First Page only . 6. Click OK . 7. Click Print . NOTE To create a new watermark or ed it an existing watermark: • Click the New or Edit button. • Enter the text for the watermark and select the font, size, angle, etc., to [...]

Windows: PCL Emulat ion Driver • 204 Collating 20 00 Collating can be carried out with or without a hard disk drive installed. However, printers with a hard disk drive w ill provide greater performance. The following instructions explain how to select collating using the printer driver. 1. Open the file in your application and select File → Pr [...]

Windows: PCL Emulat ion Driver • 205 Proof and Print 20 00 Proof and print allows printing of a single copy of a documen t for checking before printing multiple copies of the same document. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer . NOTES • The internal hard disk must b[...]

Windows: PCL Emulat ion Driver • 206 3. On the Job Options tab, under Job T ype , select Proof and Print . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . (If no dialog box appears, click PIN .) 5. On the General tab, enter th e number of copies and select Collate , if applicable, then clic[...]

Windows: PCL Emulat ion Driver • 207 Printing T he Additional Copie s 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of[...]

Windows: PCL Emulat ion Driver • 208 Deleting T he Document If the proof is not rea dy for printi ng, the job must be deleted fro m the printer: 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number an[...]

Windows: PCL Emulat ion Driver • 209 7. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting the remaining copies of the doc ument is to use the Storage Device Manager. Ple ase refer to the On-line help for Storage Device Ma nager.[...]

Windows: PCL Emulat ion Driver • 210 Secure Printing (Printing Confidential Documents) 20 00 Secure printing or printing with passwords allows the prin ting of confidential documents on printer s that are shared with other users. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, click the PCL printer .[...]

Windows: PCL Emulat ion Driver • 211 3. On the Job Options t ab, under Job T y pe , select Secure Print . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . (If no dialog box appears, click PIN .) 5. Enter the n umber of copies and select Co llate , if applicable. 6. Click Print . The docume n[...]

Windows: PCL Emulat ion Driver • 212 Printing A Confi dential Document fr om The Fr ont P anel 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. [...]

Windows: PCL Emulat ion Driver • 213 Deleting T he Confiden tial Do cument Before Printing It 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. R[...]

Windows: PCL Emulat ion Driver • 214 7. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting the remaining copies of the doc ument is to use the Storage Device Manager. Ple ase refer to the On-line help for Storage Device Ma nager.[...]

Windows: PCL Emulat ion Driver • 215 Store to Hard Disk 20 00 Store to hard disk (job spooling) a llows print jobs to be prepared and stored on the hard disk for printi n g on demand. This is good for forms, generic memos, letterhead stationery, etc. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, cl[...]

Windows: PCL Emulat ion Driver • 216 3. On the Job Options t ab, under Job T y pe , select Store t o HD D . 4. In the dialog box w hich appears, enter a Job Name and password (PIN) of your choice, then click OK . (If no dialog box appears, click PIN .) 5. Enter the n umber of copies and select Co llate , if applicable. 6. Click Print . The docume[...]

Windows: PCL Emulat ion Driver • 217 T o Print A Store d Document 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the[...]

Windows: PCL Emulat ion Driver • 218 T o Delete A Stored Doc ument from T he Hard Disk Drive 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Re[...]

Windows: PCL Emulat ion Driver • 219 7. Press EN TER to delete the job, then press ON LINE . NOTE An alternative method o f printing or deleting the remaining copies of the docum en t is to use the Storage Device Manager. Ple ase refer to the On-line help for Storage Device Ma nager.[...]

Windows: PCL Emulat ion Driver • 220 Printing P o st ers 20 00 This option allows you to con figure and print posters by breaking up the document page into multiple pieces which print enlarged on separate sheets. Then the separate sheets are combined to produce a poster. It is only available with the PCL printer driver 1. Open the file in your ap[...]

Windows: Postscript Emulation Driver • 221 P o stscript Emulation Driver_____ The Windows Postscript emulation printer driver contains settings for many of the same items as are fou nd in the operator panel menus. Where items in the printer dr iver are the same as those in the operator pan el menus, and you print documents from Windows, the setti[...]

Windows: Postscript Emulation Driver • 222 • S toring Print Files to the Ha rd Disk Drive (see page 237) NO TE Most applications allow the printer properties to be accessed from within the document print dialog box.[...]

Windows: Postscript Emulation Driver • 223 N-Up Printing (Printing Mu ltiple P ages on One Sheet) Me and 98 You can print either 2 or 4 pages on one sheet of paper. 1. Open the file in your application and select File → Pr int . 2. In the Prin t dialog box , click the Postscript emulation printer , then click Properties . 3. On the Paper tab, u[...]

Windows: Postscript Emulation Driver • 224 Printing Custom P age Sizes Me and 98 Custom page sizes can be pr inted from Tray 1, Tray 2 or the Multi-Purpose (MP) Tray, one-sided printing only, rear exit only. T ray 1 and T ray 2 Custom Size Range • minimum 3.94'' x 5.83'' [100 x 148 mm] • maximum 8½'' x 14'&[...]

Windows: Postscript Emulation Driver • 225 2. Load the custom size paper in the tray you will be using. For example, the MP T ray: 3. Open the file in your application and select File → Pr int . 4. In the Print dial og box, select the Postscript emulation printer , then click Properties .[...]

Windows: Postscript Emulation Driver • 226 5. On the Paper tab and select the tray you are using in the Paper source drop-down list. 6. Under Paper Size ( 1 ), scroll across and click one of the three Custom icons, then click Custom ( 2 ). Name an d define your[...]

Windows: Postscript Emulation Driver • 227 custom size in the dialog box which appea rs, then click OK twice to go back to the Print dialog box. 7. Click OK to print the doc ument.[...]

Windows: Postscript Emulation Driver • 228 Chang ing T he Resolution for a Print Job Me and 98 1. Open the file in your application and select File → Pr int . 2. In the Print dialog b ox, click the Post script emulation printer , then click Properties . NOT E These instructions explain how to change the settings as you are printing a job. If yo[...]

Windows: Postscript Emulation Driver • 229 3. On the Graphics ta b, select the required printing resoluti on in the Resolution drop-down list, then click OK : • Fine = high resolution, slower speed: the default. Provide s optimum results when printing graphics. • Normal = medium resolution, medium speed: choose this set- ting for documents wi[...]

Windows: Postscript Emulation Driver • 230 Duplex Printing (Printing on Both Sides of The P aper) Me and 98 • Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m ² ). • Paper must be loaded print side up . • Any tray (T ray 1, optional T ray 2, MP tray) can be used for duplex printing. 1. Open the file in your application and select Fil[...]

Windows: Postscript Emulation Driver • 231 3. On the Paper tab, click More Options… . Select F lip on Long Edge or Flip on Short Edge , then click OK twice. 4. Click OK to print the doc ument.[...]

Windows: Postscript Emulation Driver • 232 Collating Me and 98 Collating can be carried out with or without a hard disk drive installed. However, printers with a hard disk drive w ill provide greater performance. 1. Open the file in your application and select File → Pr int . 2. In the Print dialog b ox, click the Post script emulation printer [...]

Windows: Postscript Emulation Driver • 233 Secure Print (Printing Confidential Documents) Me and 98 Secure printing or printing with passwords allows the prin ting of confidential documents on prin ters th at are shared with other users. Once the document is printed, it is deleted from the Hard Disk Drive. If you wish to retain the document on th[...]

Windows: Postscript Emulation Driver • 234 4. Click the Device Options tab. In the Printer fe atures list, click Job T ype ( 1 ), th en select Secure print under Change setting ( 2 ). 5. Enter your 4-digit p assword (0000 to 9999): In th e Printer features list, click PA S S W O R D 1 , then select the value of your choice for that digit under Ch[...]

Windows: Postscript Emulation Driver • 235 PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5.[...]

Windows: Postscript Emulation Driver • 236 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Pres[...]

Windows: Postscript Emulation Driver • 237 Store to Hard Disk Me and 98 Store to hard disk (job spooling) a llows print jobs to be prepared and stored on the hard disk for printi n g on demand. This is good for forms, generic memos, letterhead stationery, etc. 1. Open the file in your application and select File → Pr int . 2. In the Print dialo[...]

Windows: Postscript Emulation Driver • 238 4. Click the Device Options tab . I n t he Printer features list ( 1 ), click Job T ype , then select S tore to HDD under Change settings ( 2 ). 5. Enter your 4-digit p assword (0000 to 9999): In th e Printer features list, click PA S S W O R D 1 , then select the value of your choice for that digit unde[...]

Windows: Postscript Emulation Driver • 239 Printing a Stored Document fro m The F ront Panel 1. Press + to enter the menu mode. PRINT JOBS MENU 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Re[...]

Windows: Postscript Emulation Driver • 240 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . [...]

Windows: Postscript Emulation Driver • 241 W indows 2 0 00 and XP • N-up Printing: multiple pag es on one sheet (see p age 242) • Booklet s (see p age 243 ) • Custom Page Siz es (see page 245) • Selecting Print Resolu tion (see p age 247) • Duplex Printing (see pag e 249) • W aterma rks (see p age 251 ) • Collating (see page 252) ?[...]

Windows: Postscript Emulation Driver • 242 N-Up Printing (Printing Mu ltiple P ages on One Sheet) 20 00 an d X P 1. Open the file in your application and select File → Pr int . 2. In the Print dialog bo x, select the Postscript emulation printer . 3. Windows XP only : click Preferences . 4. On the Layout tab, under Pages Per Sheet , select the [...]

Windows: Postscript Emulation Driver • 243 Printing Booklets 20 00 an d X P Booklets are restricted to two pages per sheet, i.e., you can print a 5½'' x 8½'' booklet on 8½'' x 11'' paper. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript [...]

Windows: Postscript Emulation Driver • 244 4. On the Layout tab, under Pages Per Sheet , select Booklet . 5. Select Portrait or Landscape under Orient ation . 6. Make sure Flip on Long Edge is selected under Print on Both Sides(Duplex) . 7. Select the desired Page Order . 8. Windows XP only : click OK to return to the Print di alog box. 9. Click [...]

Windows: Postscript Emulation Driver • 245 Printing Custom P age Sizes 20 00 an d X P The printer media size fo r the tray you’re using must be manually set in the driver to the custom paper size before use (range 3½'' to 8½'' [89 to 216 mm] wide x 5'' to 14'' [127 to 356 mm] long). 1. Make sure the rea[...]

Windows: Postscript Emulation Driver • 246 6. On the Layout tab., click Advanced . 7. In the Paper Size drop-down list, select Postscript Cust om Page Size . 8. Define your custom size in the dialog box which appears, then click OK twice. 9. Click the Paper/Quality tab and select the feed tray you are using for the custom size p aper from the Pap[...]

Windows: Postscript Emulation Driver • 247 Chang ing T he Resolution for A Print Job 20 00 an d X P 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation printer . 3. Windows XP only : click Preferences . NOTE These instructions explain how to chang e the settings as you are[...]

Windows: Postscript Emulation Driver • 248 4. On the Job Options t ab, select the requi red printing resolution, the n click OK : • Fine = high resolution, slower speed: the default. Provide s optimum results when printing graphics. • Normal = medium resolution, medium speed: choose this set- ting for documents with lower resolution graphics,[...]

Windows: Postscript Emulation Driver • 249 Duplex Printing (Printing on Both Sides of The P aper) 20 00 an d X P • Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m²) . • Paper must be loaded print side up . • Any tray (T ray 1, optional T ray 2, MP tray) can be used for duplex printing. 1. Open the file in your application and select[...]

Windows: Postscript Emulation Driver • 250 4. On the Layout tab, under Print on Both Sides (Duplex) , select Flip on Long Edge or Flip on Short Edge . 5. Windows XP only : click OK to return to the Print di alog box. 6. Click Print .[...]

Windows: Postscript Emulation Driver • 251 Printing W atermarks 20 00 an d X P 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation printer . 3. Windows XP only : click Preferences . 4. On the Job Options tab, cli ck Watermark . 5. In the dialog box which appears, click Ne [...]

Windows: Postscript Emulation Driver • 252 Collating 20 00 an d X P Collating can be carried out with or without the optional hard disk drive installed. However, printers w i th a hard disk drive will provide greater performance. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript e[...]

Windows: Postscript Emulation Driver • 253 Secure Printing (Printing Confidential Documents) 20 00 an d X P Secure printing allows the printing of confide ntial documents on printers that are sh ared with other users. First the docu ment is assigned a password a nd processed to a print file which is saved on the hard disk drive. Then it is printe[...]

Windows: Postscript Emulation Driver • 254 4. On the Jo b Options ta b, selec t Secure Print . 5. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 6. Enter the n umber of copies to be printe d, then select Collate if applicable. 7[...]

Windows: Postscript Emulation Driver • 255 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 256 ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting a confidential document is to use the[...]

Windows: Postscript Emulation Driver • 257 Proof and Print 20 00 an d X P Proof and Print lets you print a pr oof of a documen t for review and approval be fore printi ng the do cument in quantity. First the document is assigned a password a nd pr ocessed to a print file. The file is saved on the hard disk drive and one copy pr ints. If the docum[...]

Windows: Postscript Emulation Driver • 258 4. On the Jo b Options ta b, selec t Proof and Print . 5. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 6. Enter the n umber of copies to be printe d, then select Collate if applicable[...]

Windows: Postscript Emulation Driver • 259 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 260 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Pres[...]

Windows: Postscript Emulation Driver • 261 Store to Hard Disk 20 00 an d X P Store to hard disk (job spooling) a llows print jobs to be prepared and stored on the hard disk for printi n g on demand. This is good for forms, generic memos, letterhead stationery, etc. 1. Open the file in your application and select File → Pr int . 2. In the Print [...]

Windows: Postscript Emulation Driver • 262 4. On the Jo b Options ta b, selec t Store to HDD . 5. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 6. Enter the n umber of copies to be printe d, then select Collate if applicable. 7[...]

Windows: Postscript Emulation Driver • 263 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 264 ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Press EN TER to delete the job, then press ON LINE . NOT E An alternative method o f printing or deleting documents stored on the Hard Disk Dri[...]

Windows: Postscript Emulation Driver • 265 Printing Overlays 20 00 an d X P What are Overlays? An Overlay ca n be a combination of gr aphics, fonts, or text that is stored in the printe r's flash memo ry or on the optional hard disk drive, and printed whenever required. Th e result is similar to the Watermark feature, but with the ability to[...]

Windows: Postscript Emulation Driver • 266 Once someone has set up all the necessary overlay files on the printer, other users only have to switch on the required settings in the printer driver to use the overlays. Creating Documents T o Use As Overlays An overlay can be created in any softwar e application that can handle logos, letterheads, for[...]

Windows: Postscript Emulation Driver • 267 4. Select the Overlay tab. 5. Choose Create Form from the drop-down list, then make your selections in the dialo g box which appears and click OK . 6. Windows XP only : click OK to return to the Print di alog box. 7. Click Print . Instead of sending the print job to the printer, this prompts you to save [...]

Windows: Postscript Emulation Driver • 268 W indows NT 4.0 • N-up Printing: multiple pag es on one sheet (see p age 269) • Custom Page Siz es (see page 270) • Selecting Print Resolu tion (see p age 272) • Duplex Printing (see pag e 274) • W aterma rks (see p age 276 ) • Collating (see page 277) • Secure Print: printing confiden tial[...]

Windows: Postscript Emulation Driver • 269 N-Up Printing (Printing Mu ltiple P ages on One Sheet) NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation printer , then click Properties . 3. On the Advanced tab, double click Document Options . 4. Click Page Layout (N-UP[...]

Windows: Postscript Emulation Driver • 270 Printing Custom P age Sizes NT 4.0 The printer media size fo r the tray you’re using must be manually set in the driver to the custom paper size before use (range 3½'' to 8½'' [89 to 216 mm] wide x 5'' to 14'' [127 to 356 mm] long). 1. Make sure the rear exit p[...]

Windows: Postscript Emulation Driver • 271 5. On the Page Setup tab, select Post script Custom Page Size at the bottom of the Paper Size drop-down list, then define the custom size in the dialog box which appears and click OK . 6. Select the tray you are using in th e Paper Source drop-down box, then click OK . 7. Click OK to print the doc ument[...]

Windows: Postscript Emulation Driver • 272 Chang ing T he Resolution for A Print Job NT 4,0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation printer , then click Properties . NOT E These instructions explain how to change the settings as you are printing a job. If you w[...]

Windows: Postscript Emulation Driver • 273 3. On the Job Options tab, select the require d print resolution unde r Quality , then click OK : • Fine = high resolution, slower speed: the default. Provide s optimum results when printing graphics. • Normal = medium resolution, medium speed: choose this set- ting for documents with lower resolutio[...]

Windows: Postscript Emulation Driver • 274 Duplex Printing (Printing on Both Sides of The P aper) NT 4.0 • Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m²) . • Paper must be loaded print side up . • Any tray (T ray 1, optional T ray 2, MP tray) can be used for duplex printing. 1. Open the file in your application and select File ?[...]

Windows: Postscript Emulation Driver • 275 3. On the Page Setup tab, under Print on Both Sides (Duplex) , select Long Side or Short Side . 4. Click OK to print the doc ument.[...]

Windows: Postscript Emulation Driver • 276 Printing W atermarks NT 4.0 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation printer , then click Properties . 3. On the Job Options tab, cli ck Watermark . 4. In the dialog box which appears, click Ne w to define a watermark o[...]

Windows: Postscript Emulation Driver • 277 Collating NT 4.0 Collating can be carried out with or without the optional hard disk drive installed. However, printers w i th a hard disk drive will provide greater performance. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation[...]

Windows: Postscript Emulation Driver • 278 Secure Printing (Printing Confidential Documents) NT 4.0 Secure printing allows the printing of confide ntial documents on printers that are sh ared with other users. First the docu ment is assigned a password a nd processed to a print file which is saved on the hard disk drive. Then it is printed on dem[...]

Windows: Postscript Emulation Driver • 279 3. On the Job Options t ab, select Secure Print . 4. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 5. Enter the n umber of copies to be printe d, then select Collate if applicable. 6. [...]

Windows: Postscript Emulation Driver • 280 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 281 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Pres[...]

Windows: Postscript Emulation Driver • 282 Proof and Print NT 4.0 Proof and Print lets you print a pr oof of a documen t for review and approval be fore printi ng the do cument in quantity. First the document is assigned a password a nd pr ocessed to a print file. The file is saved on the hard disk drive and one copy pr ints. If the document is o[...]

Windows: Postscript Emulation Driver • 283 3. On the Job Options t ab, select Proof and Print . 4. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 5. Enter the n umber of copies to be printe d, then select Collate if applicable. [...]

Windows: Postscript Emulation Driver • 284 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 285 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Pres[...]

Windows: Postscript Emulation Driver • 286 Store to Hard Disk NT 4.0 Store to hard disk (job spooling) a llows print jobs to be prepared and stored on the hard disk for printing on demand. The job is password protected. 1. Open the file in your application and select File → Pr int . 2. In the Print dial og box, select the Postscript emulation p[...]

Windows: Postscript Emulation Driver • 287 3. On the Job Options t ab, select Store to HDD . 4. In the dialog box w hich appears, enter a Job Name and 4-digit password (PIN) of your choi ce (0000 to 9999), then click OK . (I f no dialog box appears, click PIN .) 5. Enter the n umber of copies to be printe d, then select Collate if applicable. 6. [...]

Windows: Postscript Emulation Driver • 288 2. Press EN TER . ENTER P ASSWORD **** 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press + / – u[...]

Windows: Postscript Emulation Driver • 289 3. Use + / – to set the number for the fi rst digit of th e pass word, then press ENTER to engage the number and move to the next digit: ENTER P ASSWORD 5*** 4. Repeat step 3 for each of the rema ining digits in the password. SELECT JOB ALL JOBS 5. Press CANCEL . DELETE THE JOB Y=ENTER/N=CANCEL 6. Pres[...]

Windows: Postscript Emulation Driver • 290 Printing Overlays NT 4.0 What are Overlays? An Overlay ca n be a combination of gr aphics, fonts, or text that is stored in the printe r's flash memo ry or on the optional hard disk drive, and printed whenever required. Th e result is similar to the Watermark feature, but with the ability to be much[...]

Windows: Postscript Emulation Driver • 291 Once someone has set up all the necessary overlay files on the printer, other users only have to switch on the required settings in the printer driver to use the overlays. Creating Documents T o Use As Overlays An overlay can be created in any softwar e application that can handle logos, letterheads, for[...]

Windows: Software Utilities • 292 Downloading T he Print File T o Use as An Overlay Use the Storage Device Manag er utility to download the file for use as an overlay. See “Storage Device Man ager Utility for Windows” on page 296. Software Utilities ______________ Overview These programs are located on the Drivers CD supplied with your printe[...]

Windows: Software Utilities • 293 Color Swatch Utility General Information The Color Swatch Utility allows you to print swatches of colo r samples on your Oki colo r printer. The swatches are used with your software program to select and repr oduce color accurately. The swatches represent selected samples of the Oki color printer's color pal[...]

Windows: Software Utilities • 294 Using the Colo r Swatch Utility Selecting Colors When you load the utilit y, a swatch page disp lays commonly used colors. Select print to print sample pag es. Color Samples Use the color blocks to pick the sp ecific colors that you want to appear in your printed document. Color V alues Each color block, or sampl[...]

Windows: Software Utilities • 295 Creating Custom Swatch Col ors If you don't find your desired co lor, you can create or customize colors: 1. Select Cust om Swatch from the File menu. 2. On the pop-up window , there are 3 slide bars that allow you to customize swatch es: – Hue bar changes the hue of the sw atches, for example, red to gree[...]

Windows: Software Utilities • 296 Storage Device Manager Utility for W indows General Information Storage Device Manager (SDM) le ts you manage • The optional 20 GB inter nal hard disk drive. • The printer’s built-in 2 MB flash memory . NOT E Storage Device Manager requ ires Microsoft Internet Explorer 4.0 or higher to run.[...]

Windows: Software Utilities • 297 Summary of Storage Device Manager F unctions • Create or modify a project. • Download files to a printer . • Add or remove printe rs being administered. • Reboot the printer . • Manage the Proof & Print and Secure Print spooler queues on the internal hard disk drive. • Delete files from the intern[...]

Windows: Software Utilities • 298 Installing Storage Device Manager 1. Place the driver CD supplied with your printer in your CD-ROM drive and wait for the Me nu Inst aller to open. If the CD does not AutoPlay, click Start → Run → Browse. Browse to your CD-ROM and double-click Install.exe, then click OK.) 2. Click Next to accept the terms in [...]

Windows: Software Utilities • 299 3. Click Exit . The Storage Device Manager dialo g box opens. Using Storage Device Manager On-Line Help • From the main S torage Device Manager window , click Help T opics from the Help pull-down menu. • From other S torage Device Manager windows, click the Help button. Administration On network systems, the [...]

Windows: Software Utilities • 300 • Reboot the printer . • Delete files. (Show Resources is the preferred me thod.) • Format the hard disk drive. NOT E With Show Resource s, you can browse to the file, click it, click Delete, th en click OK to confirm the deletion. Using Administrator Functions to delete a file requires that you print out a[...]

Windows: Software Utilities • 301 Setting Up an Administrative P assword 1. With the S torage Device Manager program open, click Administrator Functions in the Printer s menu. 2. T ype in the default p assword (p1xs7d0m) under Enter Password , then click Change Password . 3. T ype the 8-digit, alpha- numeric p assword of your choice under New Pas[...]

Windows: Software Utilities • 302 Creating PostScript Forms Creating & Downloading a PostScript Project Step 1: Create the Forms in Your Software Application 1. Create the document in your software application. 2. Click File → Prin t and make sure the PostScript driver is selected. 3. Select Print to file . 4. Engage the Encapsulated PostSc[...]

Windows: Software Utilities • 303 2. Click Project s → New Project . The Project dialog box opens. 3. Click Project s → Save Project , enter the path/name fo r storing the project on you r hard drive or your network, then click Save . Step 3: Add Files to the Project 1. Click Project s → Add File to Project . The Open dialog box app ears. 2[...]

Windows: Software Utilities • 304 Step 4: Check the Locat ion for Storing the Files in the Printer’s Memory • If your printer is equipped with an internal ha rd disk drive, the S torage Device Manager will automatically s a ve the forms to the PostScript partition on the hard drive. • If your printer does not have an internal har d disk dri[...]

Windows: Software Utilities • 305 Creating PCL Macros ( Forms) There are two basic processes to producing PCL macros: • A: Creating and downloading the PCL project • B: T est printing the macro A: Creating and Downloadin g a PCL Project Step 1: Create the Forms in Your Software Application 1. Create the document in your software application. [...]

Windows: Software Utilities • 306 Step 3: Convert th e Files to Binary (.bin) Format 1. Click Project s → Filter Macro File . The Filter Printer Patterns dia log box appears. 2. Make any adju stment s in the settings. 3. Click OK . The Open dialog box app ears. 4. Make sure Print spool files (* .prn) is selected in the File of type drop-dow n l[...]

Windows: Software Utilities • 307 Step 4: Add the bin Files to the Project 1. Click Project s → Add File to Project . The Open dialog box app ears. 2. Highlight the.bin file y ou wish to add and click Open . The file name appears in the Pro ject dialog box. 3. Repeat steps 1 and 2 until all the files you wish to include in the project appear in[...]

Windows: Software Utilities • 308 3. Click OK . 4. When you’re through reviewing the settings, click Projects → Save Project . Step 6: Download the Project to the Printer 1. Click Project s → Send Project Fi les to Printer . Command Issued appears. 2. Click OK . B: T est Printing PCL Macros 1. With S torage Device Manager open and the appro[...]

Windows: Software Utilities • 309 Maintaining the Internal Ha rd Drive and Flash Memory HDD Print Jobs The HDD Print Jobs feature allo ws you to view and delete the Proof & Print and Secure Print files stored on the printer’s internal hard drive. 1. Open S to rage Device Manager and click the icon fo r the printer whose contents you wish to[...]

Windows: Software Utilities • 310 • Click Print Job(s) to print the files out before they are automat- ically deleted. Show Resources Use the Show Resou rces feat ure to de lete files from the in ternal hard drive and flash memory. 1. Open S to rage Device Manager and click the icon fo r the printer whose contents you wish to view . 2. Click Pr[...]

Windows: Software Utilities • 311 Using Overlays General Information To use overlays, the Storage Device Manager softwar e must be installed. In order to en sure enough memory is available for storing overlay files, it is recommended t hat the pr inter be equipped with the optional hard disk drive. You can save logos, letterheads, etc. as overla [...]

Windows: Software Utilities • 312 • Overlay elements must be created in the software application of your choice, then stored on the printer’s hard drive using S torage Device Manager before they can be used. • If the hard disk memory is insufficient for the spooled data, the message DISK FULL appears. • If the software application has a c[...]

Windows: Software Utilities • 313 4. Under Defined Overlays , click an y overlays you wish to use (to select more than one, pr ess the Ctrl key while selecting the names), then click Add . • Each name appears in the Active overlays box. • T o print a sample of an overla y to see what it looks li ke, click the name under Defined Overlays , the[...]

Windows: Software Utilities • 314 Using Overlays: Windows Me/98/95 PCL Defining Overlays: Me/98/95 PCL 1. Click Start → Settings → Printer s . 2. Right click the PC L printer icon, then click Properties . The Properties dialog box appea rs. 3. Click the Job Options t ab, click the Overl ay butto n. 4. Click Define overlays . 5. Under Overlay [...]

Windows: Software Utilities • 315 • If you wish to add more overlays to the list, click Define over- lays , then fill in the appropr iate information in the Define over- lays dialog box and click Close . 6. Click Print us ing active overlay s , then click OK and print the document. Editing Def ined Overlays: Me /98/95 PCL 1. Click Start → Set[...]

Windows: Software Utilities • 316 Using Overlays: Windows Me/98/95/PostScript Defining Overlays: Me/98/95 PostScrip t 1. Click Start → Settings → Printer s . 2. Right click the PostScript printer icon, then click Properties . The Properties dialog box appea rs. 3. Click the Job Options t ab. Click the Overlay button. 4. Set up an Overlay Grou[...]

Windows: Software Utilities • 317 4. Click the Overlay tab. 5. Click Enable Overlay in the drop-down list. 6. Click up to four groups under De fined Ove rlay , then click Add . 7. Click OK and prin t the docum ent. Editing Def ined Overlays: Me/9 8/95 PostScript 1. Click Start → Settings → Printer s . 2. Right click the PostScript printer ico[...]

Windows: Software Utilities • 318 Using Overlays: Windows NT 4.0 PCL Defining Overlays: NT 4.0 PCL 1. Click Start → Settings → Printer s . 2. Right click the PC L printer icon, then click Document Defaults . The Default dialog box appear s. 3. Click the Job Options t ab. C lick the Ove rlay button. 4. Click Define overlays . The Define overla[...]

Windows: Software Utilities • 319 5. Click Print us ing active overlay s , then click OK and print the document. Editing Def ined Overlays: NT 4.0 PCL 1. Click Start → Settings → Printer s . 2. Right click the PC L printer icon, then click Document Defaults . The Defaults dialog box appears. 3. Click the Job Options t ab. C lick the Ove rlay [...]

Windows: Software Utilities • 320 7. Click OK and close the Printers dialog box. Defining Overlays: NT 4.0 PCL 1. Click Start → Settings → Printer s . 2. Right click the PostScript printer icon, then click Document Default s . The Default dialog box appear s. 3. Scroll down to Layout , and click Overlay . 4. Under Change ‘Overlay’ S e tti[...]

Windows: Software Utilities • 321 Using Overlays: Windows NT 4.0 PostScript Defining Overlays: NT 4.0 PostScript 1. Click Start → Settings → Printer s . 2. Right click the PostScript printer icon, then click Document Default s . The Default dialog box appear s. 3. Click the Job Options , and click Overlay . 4. Click New . The Define Overlays [...]

Windows: Software Utilities • 322 The Setting of Overlay dialog box appe ars. 5. Select the Overlay group( s) you wish to print, then click Add . The group will appear in the Active Overlay Groups list. 6. Click OK twice and print the document. Editing Def ined Overlays: NT 4.0 PostScript 1. Click Start → Settings → Printer s . 2. Right click[...]

Windows: Software Utilities • 323 PrintSuperV ision Utility General Information PrintSuperVision is a web-based application fo r managing printing devices connected to a network. Pr intSupe rVision pr ovides access to networked printer data for mo nitoring, reporting and managing networked printers. It provides a full range of management function[...]

Windows: Software Utilities • 324 Additional Information For more information: • See your on-line OkiL AN ® 8100 Sof tNIC User ’ s Guide (on the Drivers CD supplied with your printer or • Click on Help in the PrintSuper Vision program. Network Print er Status Utility This utility creates an additional t ab (STATUS) in the Po stScript and P[...]

Windows: Software Utilities • 325 3. Click UPDA TE to see the device settings. The following window displays: Click on an item to se e this inform ation: Trays: Paper Type, weight, size Duplex: Installed/not installed Disk/Memory: RAM size and % used; Flash Memory size and % used Toner Remaining: % toner remaining is show n for each cartridge. NO[...]

Windows: Software Utilities • 326 LP R Utility The LPR Utility allows you to print di rectly to a printer on the network without a print server. It create s an Oki Printer Port, and installs a pop- up status box so you can monitor printe r status. LPR operates in Wind ows Me/98/95 , Windows NT 4.0, Windows 2000, and Windows XP operating systems. [...]