Omron Healthcare HEM-907XL manuale d’uso

HIDE P - SET 100 AUTO 140 1 80 220 260 280 MODE AVG. MANU. CHECK SINGLE ON/OFF A V G . / 1 s t / 2 n d / 3 r d D E F L A T I O N START STOP mmHg SYS mmHg DIA BPM PULSE AC ART. INDEX INDEX MAX MAX XL IntelliSense™ Blood Pressure Monitor Model HEM-907XL T able of Contents Be Sure to Read This Section Exemptions .....................................[...]

2 3 NOTES ON SAFETY EXEMPTIONS OMRON does not accept liability and warranty becomes void under the following circumstances: 1. When persons, not authorized by OMRON, perform repairs or modifications of this product. 2. When use and/or operation of this device is adversely effected by a device not manufactured by OMRON. 3. When use and/or operation [...]

4 5 NOTES ON SAFETY NOTES ON SAFETY Unplug the AC adapter from the electric outlet if this unit is unused for an extended period of time. Unplug the AC adapter from the electric outlet when installing, removing, or cleaning the unit. Confirm readings with a stethoscope when an irregular pulse wave is displayed or when the measured value is question[...]

6 7 FEA TURES OF THE PRODUCT NOTES ON SAFETY Maintenance and inspection 1. Check the unit operation on regular basis. 2. If this unit has not been used for more than three months, be sure to check that this unit operates normally and safely before use. T roubleshooting If device error 9 (Er9) occurs, take the following procedure promptly: (1) Remov[...]

8 9 COMPONENTS OF THE PRODUCT COMPONENTS OF THE PRODUCT XL Main unit Accessories Air tube 1.0m (39 1/3") * Model: HEM-TUBE-100X AC adapter Model: HEM-AC-J Instruction Manual Items identified with an asterisk (*) are consumables and not covered by the guarantee. IntelliSense™ Blood Pressure Monitor , Model HEM-907XL (Included and also availab[...]

10 11 FEA TURES AND FUNCTIONS FEA TURES AND FUNCTIONS Main unit 1. Display: Displays blood pressure and, pulse rate readings, and oscillation pulse level. 2. HIDE Button: Switches display and non-display of measured results. 3. DC jack: Connects the AC adapter . 4. P-SET (pressure setting) Knob: In the AUTO position, inflation level is automaticall[...]

12 13 FEA TURES AND FUNCTIONS FEA TURES AND FUNCTIONS Functions setting (1) Inflation level setting AUTO (Automatic setting): Can be used when the SINGLE, A VG, or MANU Mode is selected. The unit estimates the systolic blood pressure during inflation and inflates to a proper cuff pressure (approximately 30-40 mmHg above the patient’s systolic pre[...]

14 15 HOW T O APPL Y THE CUFF HOW T O APPL Y THE CUFF General advice • Do not inflate the cuf f without being wrapped over the arm. • Do not use a damaged cuff. 1. Select the cuf f according to the arm size Arm circumference Name of the cuf f (7 " - 9 " ) 17-22 cm HEM-907-CS19 (Small) (9 " - 13 " ) 22-32 cm HEM-907-CR19 (Med[...]

16 17 HOW T O USE THE POWER S O U R C E HOW T O USE THE POWER S O U R C E General advice • Read the instruction manual of the other devices to be used at the same time with this unit to understand and be aware of the interaction between the devices. Do not use this unit in the presence of flammable gas, or anesthetics, or in a high pressure oxyge[...]

18 19 HOW T O MEASURE BLOOD PRESSURE HOW T O USE THE POWER SOURCE General advice • Patients should not touch the unit. If cuff inflation does not stop, remove the cuf f or pull out the air tube from the main unit. List of Measurement Modes T o measure only once SINGLE Mode Refer to Page 20 . T o measure two times (or three times) automatically an[...]

20 21 5. Push the ST ART Button to start the measurement. • Do not push the ST ART Button without wrapping the cuff. • If you want to stop measurement, push the STOP Button. The cuff will rapidly deflate. 6. The measurement results are displayed. • While the battery pack is in use, the monitor will turn off automatically after five minutes of[...]

22 23 5. Push the ST ART Button to start the measurement. After the pre-select waiting time, the unit takes the 1st measurement. After displaying the results of 1st measurement, subsequent measures occur automatically at the specified intervals. 6. The measurement results are displayed. After all the measurements are finished, average values will b[...]

24 25 5. Place the stethoscope on the patient's arm. 6. Push the ST ART Button to start the measurement. • Do not push the ST ART Button without wrapping the cuff. • Do not squeeze or press the cuff during the measurement. • If you want to inflate again after the start of deflation, push the ST ART Button. • If you want to accelerate d[...]

26 27 HOW T O CLEAN THE UNIT AFTER USE XL 1. Wipe the monitor with a soft, damp cloth diluted with disinfectant alcohol, or diluted detergent. 2. Complete cleaning by wiping the monitor with a soft, dry cloth. General advice • Do not clean this unit with gasoline, paint thinner , or high concentration alcohol. • Do not disinfect this unit by au[...]

28 29 TROUBLESHOOTING LIST OF ERROR CODES T rouble The unit inflates to abnormally high (low) pressure. The monitor cannot measure blood pressure. Measured values are abnormally high (low). What to inspect Is the cuff wrapped correctly? Is the patient moving during inflation? Does this patient have arrhythmia? Check the patient's condition. Is[...]

30 31 FIVE YEAR LIMITED W ARRANTY CAUTION Y our HEM-907XL IntelliSense™ Automatic Blood Pressure Monitor is warranted to be free from manufacturing defects for a period of five years under normal use. The five year warranty excludes the monitor cuf f. The cuff is warranted for a one year period. This warranty extends only to the original retail p[...]

For Customer Service Call T oll Free 1-877-216-1336 Manufactured by OMRON Distributed by: OMRON HEAL THCARE, INC. 300 Lakeview Parkway V ernon Hills, Illinois 60061 www .omronhealthcare.com Copyright © 2003 OMRON HEAL THCARE, INC. HEM-907XLINST Rev A HEM-907 10/23/03 3:13 PM Page 32[...]