Onkyo DV-SP800 manuale d’uso

SA CD & D VD A UDIO/VIDEO PLA YER D V -SP800 Instruction Manual Thank you for purchasing the ONKY O SA CD & D VD A UDIO/VIDEO PLA YER. Please read this manual thoroughly before making connections and plugging in the unit. Follo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from yo[...]

2 Getting Started Getting Started Important Safeguards .................................... 3 Precautions .................................................... 4 Notes on Discs ............................................... 6 Features/Supplied Accessories ...................... 8 Before Y ou Start ............................................. 9 Ind[...]

3 Important Safeguards WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilater[...]

4 Pr ecautions D ANGER: VISIBLE AND INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCK F AILED OR DEFEA TED. DO NOT ST ARE INT O BEAM. CA UTION: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE. For European model This unit cont[...]

5 1. Regional Restriction Codes (Region Number) Regional restriction codes are built into DVD Players and DVD- Video media for each sales region. If the regional code of the DVD Player does not match one of the regional codes on the DVD-Video, playback is not possible. The regional number can be found on the rear panel of the DVD Player . (e.g. 2 f[...]

6 This section shows y ou how to handle, clean, and store discs. Notes on Discs Disc mark D VD videos Pla y able Discs This DVD Player can playback the following discs. • Y ou cannot playback discs other than those listed above. • Y ou cannot play discs such as CD-ROM etc., even if the marks in the above table are labeled on those discs. • Th[...]

7 Playback side Cleaning Discs • Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean. • If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. • Do not us[...]

8 F eatur es/Supplied Accessories Remote controller (RC-498D V) [1] Batteries (size AA/UM-3) [2] * 1 Manufactured under licence from Lucasfilm Ltd. Lucasfilm and THX are trademarks of Lucasfilm Ltd. * 2 “ DTS ” and “ DTS Digital Surround ” are trademarks of Digital Theater Systems, Inc. * 3 Manufactured under license from Dolby Laboratories[...]

9 Bef ore Y ou Start Notes • Do not mix new batteries with old batteries or dif ferent kinds of batteries. • T o avoid corrosion, remove the batteries if the remote controller is not to be used for a long time. • Remove dead batteries immediately to avoid damage from corrosion. If the remote controller does not operate smoothly , replace both[...]

10 Index to P arts and Contr ols For operational instructions, see the page indicated in brackets [ ]. ■ Front panel 12 4 5 # 3 @$ %^ & * ) _ 78 9 0- = ~ ! 6 ( ANDBY ST OFF ON STANDBY/ON POWER LAST MEMORY CLEAR REPEAT VIDEO CIRCUIT OFF DIMMER RANDOM DISPLAY STOP PLAY PAUSE DV - SP800 SACD & DVD AUDIO/ VIDEO PLAYER PHONES LEVEL MIN MAX PHO[...]

11 ■ Displa y PROGRESSIVE DVD - AUDIO SACD V CD TITLE GROUP CHP TRACK REMAIN GUI LAST D.MIX COND LFE CR L S R S L S D TOTAL 12 3 4 5 6 7 89 @ = - 0 ! ~ # $ 1 Ÿ D indicator Lights when Dolby Digital sound is selected and played back. (Only with DVDs recorded in Dolby Digital). 2 Inserted disc indicator [25] 3 TITLE/GROUP indicator 4 GUI (Graphica[...]

12 Index to P arts and Contr ols 1 VIDEO OUTPUT COMPONENT jacks [16] If your TV has component inputs, you can connect a component video cable to your TV and to your DVD Player for ideal video quality . The component Video Cable only carries the video signal; remember to connect the left and right audio cables. If you connect a TV that is compatible[...]

13 Remote contr oller (Operation buttons) 1 SEND/LEARN indicator [65] Lights when the remote controller is sending a command to the DVD Player or other pre-programmed component, and when learning the command of another remote control unit. 2 ON/ST ANDBY buttons [20] Press ON to turn the DVD Player on and ST ANDBY to put the DVD Player in standby . [...]

14 * SUBTTL button [39] Press repeatedly to select one of the subtitle languages recorded on a DVD-Video. ( LAST M button [40] Press to resume playback from the point you last watched. ) MENU button [26] Press to display the DVD menu. _ 5 / ∞ / 2 / 3 and ENTER multi control [46] Use to navigate menu screens and enter settings. + SETUP button [21][...]

15 OPTICAL CO AXIAL L R L R SURR 11 + 2 SUB WOOFER AC INLET REMOTE CONTROL DIGIT AL OUTPUT S VIDEO VIDEO Y P B P R COMPONENT CH 1 CH 2 FRONT SURR 1 CENTER SURR 2 VIDEO OUTPUT ANALOG OUTPUT MODEL NO. DV - SP 800 SACD & DVD AUDIO/ VIDEO PLAYER Connecting to a TV Bef ore connecting • Refer also to the instruction manual of the TV . • When you [...]

16 OPTICAL CO AXIAL L R L R SURR 11 + 2 SUB WOOFER AC INLET REMOTE CONTROL DIGIT AL OUTPUT S VIDEO VIDEO Y P B P R COMPONENT CH 1 CH 2 FRONT SURR 1 CENTER SURR 2 VIDEO OUTPUT ANALOG OUTPUT MODEL NO. DV - SP 800 SACD & DVD AUDIO/ VIDEO PLAYER Making component video connections If the TV or monitor has component video inputs, making this type of [...]

17 OPTICAL COAXIAL L R L R SURR 11 + 2 SUB WOOFER AC INLET AV CONNECTOR 2 REMOTE CONTROL DIGITAL OUTPUT S VIDEO VIDEO Y P B P R COMPONENT CH 1 CH 2 FRONT SURR 1 CENTER SURR 2 MODEL NO. DV - SP 800 SACD & DVD AUDIO/VIDEO PLAYER AV CONNECTOR 1 OUT IN/ OUT VIDEO OUTPUT ANALOG OUTPUT ■ Connecting to a TV Using the SCART Cable (Eur opean models) C[...]

18 Connecting to an Amplif ier (T o Enjoy the Sound Advantage of the D VD Play er) Before connecting • Refer to the instruction manual of the amplifier . • When you connect the DVD Player to the amplifier , be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged. ?[...]

19 OPTICAL CO AXIAL L R L R SURR 11 + 2 SUB WOOFER AC INLET REMOTE CONTROL DIGIT AL OUTPUT S VIDEO VIDEO Y P B P R COMPONENT CH 1 CH 2 FRONT SURR 1 CENTER SURR 2 VIDEO OUTPUT ANALOG OUTPUT MODEL NO. DV - SP 800 SACD & DVD AUDIO/ VIDEO PLAYER : Signal flow A udio connection cables T o audio inputs z cable To z jack Making discrete 5.1 channel AN[...]

20 Before connecting • The DV -SP800 is shipped with the main power (POWER) switch in the on position ( _ ON). When the power cord is plugged in for the first time, the DV -SP800 will automatically enter the standby state and the ST ANDBY indicator will light (same condition after step 2 below). • Make sure that all the connections on pages 15-[...]

21 General A2 V2 Language Audio1 Video1 Exit Move Select Setup using the Setup Navigator Setup Navigator Setup Navigator Start Auto Start Off SETUP ENTER Setting Up the Play er The Setup Navigator has been designed to simplify the process of getting the D VD play er ready to perf orm. Designed as a series of on-screen multiple-c hoice questions, th[...]

22 Using the Setup Na vigator General A2 V2 Language Audio1 Video1 Exit Move Select Select the On Screen Language Setup Navigator OSD Language Language English français Deutsch Italiano Español SETUP ENTER ■ Setting the OSD Language (On-Screen Display Langua ge) The [OSD Language] screen establishes the OSD language, or on-screen display langua[...]

23 ■ Confirming the settings The [Exit Setup Navigator] is the final screen in the Setup Navigator . General A2 V2 Language Audio1 Video1 Exit Move Select Digital jack not compatible with 96kHz Setup Navigator 96kHz PCM Audio Amp Connection No Ye s Don't Know SETUP ENTER General A2 V2 Language Audio1 Video1 Exit Move Select Changes are saved[...]

24 Minimum speaker configuration f or DTS/Dolby Digital/MPEG2 surr ound sounds Right surround speaker Left surround speaker Center Speaker The 5.1-channel digital surround format of DOLBY DIGIT AL/ DTS/MPEG2 enables you to individually play five full-range (20 Hz-20 kHz) channels (left and right front, center , two surround channels) plus an LFE (L[...]

25 Press ON (ST ANDBY/ON on the fr ont panel). Press 0 . The disc tray comes out. Load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc. 1 2 3 4 5 Select the item you want to vie w . • When a DVD is loaded: Select the item with the cursor buttons ( 2 / 3 / 5 / ∞ ) or the number buttons then press EN[...]

26 Getting Started Using Y our D VD Player When a Menu Screen is Displa yed Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC). DVDs often contain extra information that can be accessed in the DVD menu and sometimes makes navigating DVD menu screens as enjoyable as watching the feature presen[...]

27 Forwar d and Rever se Scanning F ast f orwar d and re ver se scanning Press and hold ¡ or 1 during playbac k to scan forwar ds or backwar ds. While “ ¡ 1 ” or “ 1 1 ” is displayed on- screen blinking, release the button to resume normal playback. During DVD audio playback, “ ¡ 2 ” is displayed on screen. During MP3 playback, “ ?[...]

28 Resuming Pla ybac k from where y ou stopped Use the resume feature to restart playback from the point that the disc was stopped last time. This features cannot be used with SACD, DVD Audio discs, MP3s and CDs. Press 7 once. The display shows “ RESUME ” and the stop position is memorized. • The resume position remains memorized as long as t[...]

29 Viewing slo w playbac k 3 1/16 3 1/8 1/2 2 1/4 2 Still Frame/Slo w Play The video images on D VD and Video CD can be viewed as a still frame, play ed back at slow speeds and e ven advanced frame b y frame . Viewing a still frame Press , STEP/SLO W e / E . When viewing a DVD, if the paused picture shakes, select the [Field] setting in the Setup s[...]

30 This player offers dif ferent ways of accessing the information on a DVD, Video CD, CD, SACD or MP3. Using Search, you can search for titles or chapters on a DVD-Video, groups or tracks on a DVD-Audio, tracks on a Video CD, CD or folders or tracks on a MP3 and even select the point in time to start playback. Press SEARCH repeatedly to select the[...]

31 Using the MP3 Navigator MP3 Navigator Exit Play Folder Current : 3 1-1 T rack 1.TRACK1~1 2.TRACK2~2 3.TRACK3~3 4.TRACK4~4 1.FOLDER~1 2.FOLDER~2 3.FOLDER~3 4.FOLDER~4 5.FOLDER~5 6.FOLDER~6 MENU ENTER Del PGM CLEAR 1~4 1~10 MP3 Navigator Exit Play Folder Current : 3 1-1 T rack 1.TRACK1~1 2.TRACK2~2 3.TRACK3~3 4.TRACK4~4 1.FOLDER~1 2.FOLDER~2 3.FOL[...]

32 Repeating a Title, Gr oup, Folder , Chapter or T rack Repeat play of a c hapter/trac k DVD MP3 Press REPEA T once during playbac k of the chapter or trac k you want to repeat. Repeat play of a title/gr oup/folder Press REPEA T twice during playbac k of the title y ou want to repeat. Repeat play of a disc Press REPEA T twice during playbac k of t[...]

33 Random pla ybac k of c hapter s within one title or tracks within one gr oup Press RANDOM once. “ Random Chapter ” appears on the screen, and chapters within the title will be played back in random order . Random pla ybac k of titles or groups Press RANDOM twice. “ Random T itle ” appears on the screen, and titles will be played back in [...]

34 A program with a maximum of 24 steps can be memorized. Press PROGRAM. The Program screen appears. Exit Move Play Current: Ti tl e Ti tl e Program Memory Off 7 1 Chapter (Chapter 1~18) 1 Program Chapter Program Title PROGRAM ENTER Exit Move Play Current: Ti tl e Program Memory Off 2(/20) Program Chapter Program Title PROGRAM ENTER PROGRAM ENTER E[...]

35 A program with a maximum of 24 steps can be memorized. Press PROGRAM to enter the [MP3 Program] screen. If you added tracks to the program list from the “ Using the MP3 navigator ” on page 31, the tracks are displayed here. ENTER PROGRAM MP3 Program Exit Play Move Folder : 001~25 – – – : – – –– – – : – – –– – – [...]

36 A program with a maximum of 24 steps can be memorized. Press PROGRAM. The program screen appears. When a SACD, Video CD or CD is loaded, the cursor appears in the program window . Exit Move Play Current: T rack T otal T ime 1(/10) 0.00 Program T rack PROGRAM ENTER Use the number buttons to enter the numbers of the trac ks in the order you want t[...]

37 ■ T o add a title/group/c hapter/track to a program Press and hold PROGRAM for about 2 seconds. The current title/group/chapter/track number appears on-screen together with the program step number . If there isn ’ t already a program then a new one will be created. ■ T o save a program in memory This player can memorize the programs on up [...]

38 Y ou can select a camera angle when viewing D VDs with the multi-angle option. Press ANGLE during playbac k. The camera angle changes each time you press the button. « » | Angle : 1/4 Angle : 2/4 Angle : 3/4 Angle : 4/4 ■ T o check whether or not a disc is recor ded with angles The jacket of discs that are recorded with angles will be mark[...]

39 Audio : 1 English Dolby Digital 5.1CH Audio : 2 Spanish HELLO HOLA Dolby Digital 5.1CH Notes • Y ou cannot switch languages if there is only one language recorded on the disc. • Switching the audio language may not be possible with some titles. In this case, the mark is displayed. • For some titles, selection can be made using the DVD menu[...]

40 Continuing Playback fr om a Specif ied Location (Last Memory) The Last Memory function is convenient when y ou want to continue viewing a disc fr om the point where y ou were watching before. Unlike the resume function, the Last Memory function is effective even if the D VD is removed from the pla yer (Last Memory locations saved f or Video CDs [...]

41 Memorizing Settings f or Often V iewed D VDs (Condition Memory) Y ou can store in memory settings f or D VDs you often watch. Settings remain in memory even if y ou remove the disc from the pla yer , or s witch power to the pla yer to standby . If y ou load a disc that has its settings memorized, “ COND ” appears in the display . When you st[...]

42 T u r ning Off the V ideo Signal Output The D VD Player can be set pla ying audio exc lusively . In this case, you can obtain sound of better quality , as the D VD Player does not pr ocess video signals. (All the video output jacks send no video signals.) Notes • Some discs cannot be played without some on-screen menu interaction. If this is t[...]

43 Listening thr ough Headphones Listening through Headphones Connect the plug of the stereo headphones to the PHONES jack on the D VD play er . Adjusting the phones level T urn the dial cloc kwise to increase the phones level and counter cloc kwise to decrease it. Y ou can connect stereo headphones to the D VD Player . DVD VCD CD MP3 SACD DVD VCD [...]

44 Press DISPLA Y during while a disc is playing. Press DISPLA Y repeatedly to change the information being displa yed. The disc information is displayed superimposed over the video image on the screen. Press and hold DISPLA Y to display the time remaining on the disc. When you release the button, the information disappears. The display changes for[...]

45 Viewing Disc Inf ormation during while a disc is stopped Press DISPLA Y during while a disc is stopped to display D VD title and chapter inf ormation or Video CD and CD track inf ormation or MP3 folder and trac k information. Press DISPLA Y again to turn the displa y off. Information about the titles and chapters or folders and tracks on a disc [...]

46 Use the cursor b uttons ( 5 / ∞ ) to select the setting y ou want to change . The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit. Example Adjusting A udio and V ideo Settings SETUP — — — — — V2 Video1 General A2 Language Exit Move Audio D[...]

47 Changing to the Setup Screen “ Exper t ” Menu Mode The Setup screen menus are divided into two levels, [Basic] and [Expert], to make this unit more convenient to operate for different levels of users. The [Basic] menu mode contains functions that may be considered necessary for the basic operations of this player and helpful on-screen inform[...]

48 This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio menu to reflect the capabilities of the components that you have made digital connections to. Notes • If you have already completed the Setup Navigator screen operations, the settings [...]

49 ■ DTS Out This player is capable of outputting DTS digital audio for DVDs recorded in DTS. If this player is connected to an A V component that has a built-in DTS decoder , select [DTS]. If your system is not equipped to decode DTS, select [DTS 3 PCM]. Refer to the operating instructions supplied with your audio components if you are unsure ab[...]

50 Setting the A udio 2 Options ■ A udio Out If you connected this player to your amplifier using the 5.1 channel analog outputs (front, surround, center and subwoofer outs), set this to [5.1 Channel]; if you connected only the stereo outs, set to [2 Channel]. ■ Speaker Setting Y ou only need to make this setting if you connected this player to[...]

51 ■ Gain Settings Expert Y ou may want to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. Under the default setting, all channels are output at the relative volumes they were recorded at. Change the setting to [V ariable] if you want to adjust the relative volume levels of any of the speaker[...]

52 The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width-to-height ratio is called the aspect ratio. When viewing software recorded in different aspect ratios, the image ’ s height to width ratio can be switched to match the TV or monitor being used. Make c[...]

53 — — — — Audio1 Video1 Language General A2 V2 Exit Move TV Screen Component Video Video Out S-Video Out Frame Search Screen Saver 16:9(Wide ) Interlaced Video S1 S2 Off SETUP Settings: S1 S2 (Factory Setting) ■ Setting the Video Output Format for the A V CONNECT OR (Eur opean models only) When connections are made to the A V CONNECTOR j[...]

54 ■ Adjusting the picture quality settings – T o create your o wn setting (1) 1 Use the cursor button ( 3 ) to select [Start] then press ENTER. Video Memory Select Video Setup 2 Use the cursor button ( ∞ ) to select [Video Setup] then press ENTER. 3 Use the cursor buttons ( 2 / 3 ) to select the setting to [On] or [Of f]. DNR Move Select Che[...]

55 DISPLA Y ENTER Memory Move Select Off 1 2 3 Check ■ Adjusting the picture quality settings – T o create your o wn setting (2) 1 Use the cursor button ( 3 ) to select [Start] then press ENTER. DNR Fine Focus Sharpness White Level Black Level Hue Chroma Level Gamma Memory On Off min max soft fine min max off max green red min max – + Off 1 2[...]

56 ■ Changing the Bac kground of the Screen Y ou can select a background to appear when the player is in the stop mode. Make changes to the [Background] setting in the Setup screen Video 2 menu. — SETUP Video2 A2 Language General Audio1 V1 Exit Move Gray Black Background Video Adjust Still Picture On Screen Display Angle Indicator Auto On On ?[...]

57 DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player . Please note that if you have completed the S[...]

58 ■ Selecting a subtitle language preference The subtitle language that you will normally display can be selected from the subtitles programmed on a disc. Even when the subtitle language is changed during playback by pressing SUBTTL, the language selected at this setting will be selected when the disc is changed. Make changes to the [Subtitle La[...]

59 — — — — Language A2 V2 General Audio1 Video1 Exit Move OSD Language Audio Language Subtitle Language Auto Language DVD Language Subtitle Display Subtitle Off English English English On On Off Assist Subtitle SETUP — — — — — — SETUP Language A2 V2 General Audio1 Video1 Exit Move OSD Language Audio Language Subtitle Language Au[...]

60 Language Code List Language codes are used when setting the audio and subtitle language preferences (page 57 – 59). Japanese (ja) English (en) French (fr) German (de) Italian (it) Spanish (es) Chinese (zh) Dutch (nl) Portuguese (pt) Swedish (sv) Russian (ru) Korean (ko) Greek (el) Afar (aa) Abkhazian (ab) Afrikaans (af) Amharic (am) Arabic (ar[...]

61 This player lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children. Refer to the DVD disc jacket and the accompanying documentation to see if a particular disc contains a parental lock level. Make changes to[...]

62 General A2 V2 Language Audio1 Video1 Exit Return Move Select Parental Lock: Level Change SETUP ENTER RETURN 1 Level 234 6 7 8 5 Off ■ Setting the P arental Lock Le vel Change the Parental Lock level to a higher or lower level according to the settings printed on the DVD disc jacket or accompanying documentation. If you use the Condition Memory[...]

63 ARGENTINA AUSTRALIA AUSTRIA BELGIUM BRAZIL CANADA CHILE CHINA DENMARK FINLAND FRANCE GERMANY HONG KONG INDIA INDONESIA IT AL Y JAP AN KOREA, REPUBLIC OF MALA YSIA MEXICO NETHERLANDS NEW ZEALAND NORW A Y P AKIST AN PHILIPPINES PORTUGAL RUSSIAN FEDERA TION SINGAPORE SP AIN SWEDEN SWITZERLAND T AIW AN, PROVINCE OF CHINA THAILAND UNITED KINGDOM UNIT[...]

64 Adjusting A udio and V ideo Settings Memorizing Settings (Function Memory) Up to 5 settings can be memorized. Press SETUP . The Setup screen appears. Use the cursor b uttons ( 2 / 3 ) to select the menu y ou want. Use the cursor b uttons ( 5 / ∞ ) to select the setting to be memorized. As each menu is selected with the cursor , the settings ap[...]

65 This remote controller features a learning function that allo ws you to pr ogram the remote codes of other remote control units for more singular contr ol of your home entertainment system. A number of commands can be pr ogrammed for operation for when the remote contr oller is in D VD mode and when it is in Receiver mode. Please f ollow the pr [...]

66 Pr ogramming the Commands of Other Remote Contr ol Units into the Remote Contr oller 6 7 Press and hold down the b utton on the other remote contr ol unit that corresponds to the command you want to pr ogram until the SEND/ LEARN indicator flashes twice to indicate that the command has been successfully pr ogrammed. After flashing twice, the SEN[...]

67 Erasing the programmed command fr om one button Y ou can onl y erase memorized commands and not preset ones. Press and hold down the desired MODE button f or the command, press the SEARCH button, and then release both buttons. When you release the buttons, the SEND/ LEARN indicator lights. Press and release the button f or the command you wish t[...]

68 Register the Codes of Other Unit's Remote Contr ollers Register the codes of other unit's (TV or VCR) remote contr ollers Use this feature to register the remote codes of other remote control units. Please look up your TV/VCR from list of remote contr ol codes star ting on page 69. While pressing and holding down the desired MODE b utt[...]

69 AIW A AKAI AUDIO SONIC BELL&HOWELL BLAUPUNKT BRIONVEGA CENTURION COL TINA CORONAD CROWN DAEWOO DUAL EMERSON FENNER FERGUSON FISHER FUNAI FUJITSU GENERAL GE • P ANA GE • RCA GOLD ST AR GOODMANS GRUNDIG HIT ACHI HYPER INNO-HIT IRRADIO JVC KENDO KTV LUXOR MAGNA VOX MARANTZ MARK MA TSUI MITSUBISHI MIV AR NEC NOKIA NOKIA OCEANIC NORDMENDE OKA[...]

70 AIW A AKAI BAIRD BELL&HOWELL BLAUPUNKT CGM COL TINA DAEWOO DIGT AL EMERSON FENER FISHER FUJITSU GENERAL FUNAI G.E. GO VIDEO GOLDST AR GOODMANS GRUNDIG HIT ACHI JVC LOEWE MAGNA VOX MITSUBISHI NEC NOKIA NORDMENDE OKANO ORION P ANASONIC PHILIPS PHONOLA PIONEER RCA SABA SAMSUNG SANYO SCOTT SELECO SHARP SHINTOM SIEMENS SONY SYMPHONIC TEKNICA TELE[...]

71 Causes Symptoms Check the f ollowing guide f or the possible cause of a problem bef ore contacting service . Refer also to the respective instruction manuals of the connected components and TV . Pag e s D VD Player T r oubleshooting The DVD Player doesn ’ t switch on. The disc tray comes back out automatically , shortly after the disc tray is [...]

72 Causes Remedies Symptoms Pag e s D VD Player T roubleshooting Frame search doesn't find the frame number input, or some frames are skipped when using frame advance. SACD audio cannot be output digitally . No surround sound is output. The surround sound level is low . Cannot output 192kHz or 176.4 kHz digital audio. Cannot output 96kHz or 88[...]

73 Causes Remedies Symptoms Pag e s D VD Player Remote Controller Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity . If this happens, press the POWER switch on the unit and then press it again after about five seconds. The disc containing the MP3 tracks won'[...]

74 Specif ications General Power supply USA & Canadian models AC 120 V , 60 Hz European models AC 230 – 240 V , 50 Hz South American models AC 230 – 240 V , 50 Hz World wide models AC 120/220 – 230 V switchable, 50/60 Hz Power consumption USA & Canadian models 40 W European models 38 W Other models 36 W Power consumption in standby mo[...]

75 Memo[...]

W0208-1 SN 29343362 http://www.onky o.co.jp/ HOMEP AGE Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Li[...]