Onkyo TX-SR504/B manuale d’uso

E n AV Receiv er TX-SR504 TX-SR504E TX-SR8450 Instruction Manual Thank you for purchasing an Onkyo A V Recei ver . Please read this manual thoroughly before making connections and plugging in the unit. F ollo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your ne w A V Receiver . Plea[...]

2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near an y heat [...]

3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illegal with- out the permission of the copyright holder . 2. A C Fuse —The AC fuse inside the unit is not user - serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the unit[...]

4 Precautions —Continued F or British models Replacement and mounting of an AC plug on the po wer supply cord of this unit should be performed only by qualified service personnel. IMPOR T ANT The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Li ve As the colours of the wires in the mains lead of[...]

5 Features Amplifier • 7-channel amplifier • 75 watts per channel rms into 8 ohms, 2 channels driv en, 20 Hz to 20 kHz, less than 0.08% total har- monic distortion (FTC rating) • WRA T (W ide Range Amplifier T echnology) • Optimum Gain V olume Circuitry Processing • Dolby *1 Digital EX and Dolby Pro Logic IIx • DTS, DTS-ES Matrix/Dis[...]

6 Enjo ying Home Theater Y ou can use two sets of speakers with the A V receiv er: speak er set A and speak er set B . Speaker set A should be used in your main listening room for up to 7.1-channel playback. *While speaker set B is on, speaker set A is reduced to 5.1-channel playback. Speaker set B can be used in another room and offers 2-channel s[...]

7 Contents Introduction Important Safety Instructions ....................2 Precautions ................................................. 3 Supplied Accessories ................................. 4 Features ....................................................... 5 Enjoying Home Theater ..............................6 Speaker Sets A and B ...........[...]

8 Getting to Kno w the A V Receiver For detailed information, see the pages in parentheses. A ST ANDBY/ON b utton (32) Sets the A V receiver to On or Standby . B ST ANDBY indicator (32) Lights up when the A V receiver is on Standby and flashes while a signal is being receiv ed from the remote controller . C Remote-control sensor (11) Receiv es con[...]

9 Getting to Know the A V Receiver —Continued J T ONE, [–], and [+] buttons (46) Used to adjust the bass and treble. K STEREO button (48) Selects the Stereo listening mode. L LISTENING MODE [ ]/[ ] buttons (48) Select the listening modes. M DISPLA Y button (37) Displays various information about the currently selected input source. N DIGIT AL I[...]

10 Getting to Know the A V Receiver —Continued A DIGIT AL IN OPTICAL 1, 2, 3, and COAXIAL These optical and coaxial digital audio inputs are for connecting components with optical or coaxial digital audio outputs, such as CD and D VD players. B XM antenna (on North American models) This jack is for connecting an XM Passport System, sold separatel[...]

11 Remote Contr oller Notes: • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’t mix ne w and old batteries or dif ferent types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to prev ent damage from leakage or corrosion. • Expired batteries shoul[...]

12 Remote Controller —Continued Including the A V receiver, the remote controller can be used to control up to sev en different components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the six REMO TE MODE buttons. ■ RECEIVER/T APE Mode In RECEIVER/T APE mode, you can cont[...]

13 Remote Controller —Continued For detailed information, see the pages in parentheses. A ON/ST ANDBY b utton (32) Sets the A V receiver to On or Standby . B INPUT SELECT OR buttons (36) Used to select the input sources. C MUL TI CH b utton (37) Selects the multichannel D VD input. D DIMMER button (46) Adjusts the display brightness. E SP A/B but[...]

14 Remote Controller —Continued By default, the remote controller is set to control an Onkyo D VD player . A ON/ST ANDBY b utton Sets the D VD player to On or Standby . B Number buttons Used to enter title, chapter , and track numbers and times for locating specific points. C DISC +/– button Selects discs on a D VD changer . D T OP MENU button[...]

15 Remote Controller —Continued By default, the remote controller is set to control an Onkyo CD player . A ON/ST ANDBY b utton Sets the component to On or Standby . B Number buttons Used to enter track numbers and times for locating specific points on CD/MD players. C DISC/ALBUM +/– b utton Selects discs on a CD changer , or the next or pre vi[...]

16 Connecting Y our Speakers F or the best surround-sound e xperience, you should con- nect sev en speakers and a po wered subwoofer . The following table sho ws which channels you should use based on the number of speakers that you ha ve. *If you’re using only one surround back speaker, connect it to the left (L) SURROUND BACK SPEAKERS terminals[...]

17 Connecting Y our Speakers —Continued Using a suitable cable, connect the A V receiver’ s SUB- WOOFER PRE OUT to the input on your po wered sub- woofer . If your subwoofer is unpowered and you’ re using an external amplifier , connect the SUBWOOFER PRE OUT to it’ s input. Note: Make sure the plugs are pushed in all the way . Note: While [...]

18 Connecting Antennas This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially av ailable outdoor FM and AM antennas. The A V receiver w on’t pick up an y radio signals without any antenna connected, so you must connect the antenna to use the tuner . The supplied indoor FM antenna [...]

19 Connecting Antennas —Continued If you cannot achiev e good reception with the supplied indoor FM antenna, try a commercially av ailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obtained when installed in an attic or loft. •F or best results, install the outdoor FM an[...]

20 Connecting Y our Components • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked all A V connections. Optical Digital Jacks The A V receiver’ s optical digital jacks hav e shutter-type cov ers that open when an optical p[...]

21 Connecting Y our Components —Continued By connecting both the audio and video outputs of your D VD player and other A V components to the A V receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the A V receiver. The A V receiver supports se veral connection formats for compatibility with a[...]

22 Connecting Y our Components —Continued •W ith connection , you can listen to and record audio from your TV and listen via speaker set B. •T o enjoy Dolby Digital and DTS, use connection or . (For recording, use and , or and .) If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiv er to the A V [...]

23 Connecting Y our Components —Continued •W ith connection , you can listen to and record audio from a D VD and listen via speaker set B. •T o enjoy Dolby Digital and DTS, use connection or . (For recording, use and , or and .) • If your D VD player has main left and right outputs and multichannel left and right outputs, be sure to use the[...]

24 Connecting Y our Components —Continued Hooking Up the Multichannel D VD Input If your D VD player supports multichannel audio formats such as D VD-Audio or SA CD, and it has a multichannel analog audio output, you can connect it to the A V receiver’ s multichannel D VD input. Use a multichannel analog audio cable, or sev eral normal audio ca[...]

25 Connecting Y our Components —Continued W ith this hookup, you can use your VCR’ s tuner to listen to your fav orite TV programs via the A V receiv er, useful if your TV has no audio outputs. •W ith connection , you can listen to the VCR or D VD recorder ev en via speaker set B. •T o enjoy Dolby Digital and DTS, use connection or . (T o l[...]

26 Connecting Y our Components —Continued Connecting a VCR or DVD Recor der for Recording Connection A V receiver Signal flow VCR or D VD recorder Picture quality VIDEO 1 OUT S ⇒ S-Video input Better VIDEO 1 OUT V ⇒ Composite video input Standard VIDEO 1 OUT L/R ⇒ Analog audio L/R input — Connecting a Camcorder , Games Console, or Other [...]

27 Connecting Y our Components —Continued W ith this hookup, you can use your satellite or cable receiv er to listen to your fa vorite TV programs via the A V receiver, useful if your TV has no audio outputs. •W ith connection , you can listen to and record audio from the video source and listen via speak er set B. •T o enjoy Dolby Digital an[...]

28 Connecting Y our Components —Continued ■ CD Play er or T urntable (MM) with Built-in Phono Preamp •W ith connection , you can listen to and record audio from your CD player or turntable and listen via speak er set B. •T o connect the CD player digitally , use connection or . (For recording, use and , or and .) ■ T urntable (MM) with no[...]

29 Connecting Y our Components —Continued As of this printing, the Onkyo Remote Interacti ve Dock is the only HDD-compatible component a vailable. ■ For HDD-compatible components that support video Connect your HDD-compatible component’ s analog audio output jacks and S-V ideo output jack to the A V receiv er’ s VIDEO 2 IN L/R jacks and VID[...]

30 Connecting Y our Components —Continued •W ith connection , you can listen via speak er set B. •T o connect the recorder digitally , use connections and , or and . The A V receiver has an A C outlet on its rear panel for connecting the power cord of another A V component. The other component’ s power switch can then be left in the ON posi[...]

31 Connecting Y our Components —Continued W ith (Remote Interactiv e), you can use the following special functions: ■ A uto P ower On/Standby When you start playback on a component connected via , if the A V receiver is on Standby , it will automatically turn on and select that component as the input source. Similarly , when the A V receiv er i[...]

32 T urning On the A V Receiver MASTER VOLUME VIDEO STANDBY TONE DISPLAY STEREO DIMMER MEMORY DIGITAL INPUT TUNING MODE AB SPEAKERS TUNER TAPE VIDEO 3 VIDEO 2 VIDEO 1 VCR DVD MULTI CH C D SETUP RETURN CLEAR LISTENING MODE AUDIO LR VIDEO 3 INPUT STANDBY/ON PHONES TUNING PRESET ENTER STANDBY/ON MUTING PREVIOUS MENU GUIDE TOP MENU SP A / B -- / --- T [...]

33 Fir st Time Setup To enjoy Dolby Digital and DTS, you must connect your D VD player to the A V receiver digitally (coaxial or opti- cal). Here are the default assignments. W ith this function, you can change the digital inputs assign. If, for example, you connect your D VD player to the DIGIT AL IN OPTICAL 1 input (OPT1), you’ll need to assign[...]

34 First Time Setup —Continued If the impedance of any of the connected speakers is 4 ohms or more but less than 6, set the minimum speak er impedance to “4 ohms. ” Note: Before you change this setting, turn down the v olume. Note: • This procedure can also be performed on the A V receiv er by using the [SETUP], [ENTER], and arrow buttons. [...]

35 First Time Setup —Continued 5 Use the Down [ ] button to select “Center , ” and then use the Left and Right [ ]/[ ] buttons to select Small , Large , or None . Small: Select if the center speaker is small. Large: Select if the center speaker is large. None: Select if no center speaker is connected. Note: • If the Front setting in step 4 [...]

36 Pla ying Y our A V Components Basic A V Receiver Operation MASTER VOLUME VIDEO STANDBY TONE DISPLAY STEREO DIMMER MEMORY DIGITAL INPUT TUNING MODE AB SPEAKERS TUNER TAPE VIDEO 3 VIDEO 2 VIDEO 1 VCR DVD MULTI CH C D SETUP RETURN CLEAR LISTENING MODE AUDIO LR VIDEO 3 INPUT STANDBY/ON PHONES TUNING PRESET ENTER DISPLAY MULTI CH 1 2 4 MUTING PREVIOU[...]

37 Playing Y our A V Components —Continued The multichannel D VD input is for connecting a compo- nent with a 7.1-channel analog audio output, such as a D VD-Audio or SA CD-capable D VD player , or an MPEG decoder . See page 24 for hookup information. Note: • While the multichannel D VD input is selected, the Speaker Configuration settings on [...]

38 Listening to the Radio W ith the built-in tuner , you can enjoy AM and FM radio stations. ■ AM Frequency Step Setup (not North America and Europe) Y ou must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. T uning into AM/FM Radio Stations ■ A uto T uning Mode ■ Manual [...]

39 Listening to the Radio —Continued ■ T uning into Stations b y Frequency Y ou can tune into AM and FM stations directly by enter- ing the appropriate frequency . Y ou can store a combination of up to 40 of your fav orite AM/FM radio stations and XM channels as presets. ■ Selecting Presets ■ Deleting Presets 1 Press the [RECEIVER] button, [...]

40 Listening to the Radio —Continued Using RDS (European Models Onl y) RDS only works with European models and only in areas where RDS broadcasts are av ailable. When tuned into an RDS station, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. It was de veloped b[...]

41 Listening to the Radio —Continued Displaying Radio T ext (R T) When tuned to an RDS station that’ s broadcasting text information, the text can be displayed. Notes: • The message “W aiting” may appear while the A V receiv er waits for the R T information. • If the message “No T ext Data” appears on the display , no R T informatio[...]

42 Listening to the Radio —Continued Note: Hardware and required basic monthly subscription sold separately . Premium Channels av ailable at additional monthly cost. Installation costs and other fees and taxes, including a one-time activ ation fee may apply . Subscrip- tion fee is consumer only . All fees and programming subject to change. About [...]

43 Listening to the Radio —Continued Signing Up for XM Satellite Radio Before you can use XM Satellite Radio, you must first sign up for an account. Y ou’ll need a major credit card and your XM Satellite Radio ID, which you can get from the A V receiver, as e xplained below , or from the Passport System package and itself. Notes: • Channel 0[...]

44 Listening to the Radio —Continued Selecting XM Channels from the Fr ont Panel: Selecting the Previous Channel: Displaying XM Radio Inf ormation The following information can be displayed: Notes: • If the category , artist, or song title is not available, “- - -” will be displayed instead. • The listening mode is displayed only when spe[...]

45 Listening to the Radio —Continued P ositioning the XM P assport System Y ou can check the signal strength of the XM radio signal and adjust the position of the XM Passport System accordingly . XM Radio Messages The following messages may appear while using XM radio. The XM Passport System is not connected properly . Check the connection. The X[...]

46 Common Functions This section explains functions that can be used with an y input source. Y ou can adjust the brightness of the display . Y ou can adjust the bass and treble for the front speakers, except when the Direct or Pure Audio (not North Amer- ican models) listening mode is selected. ■ Bass Y ou can boost or cut low-frequenc y sounds o[...]

47 Common Functions —Continued W ith the sleep timer , you can set the A V receiver so that it turns off automatically after a specified period. To cancel the sleep timer , press the [SLEEP] button repeatedly until the SLEEP indicator disappears. To check the remaining sleep time, press the [SLEEP] b utton. Note that if you press the [SLEEP] b u[...]

48 Using the Listening Modes F or a description of each listening mode, see “ About the Listening Modes” on page 50. Selecting on the A V Receiver ■ [PURE A UDIO] b utton (not Nor th American model) This button selects the Pure Audio listening mode. When this mode is selected, the A V receiver outputs no video signals and its display is turne[...]

49 Using the Listening Modes —Continued The following table sho ws which listening modes can be used with each input signal format. : Only av ailable on 6.1/7.1-channel playback systems. Not av ailable while speaker set B is on. : Only av ailable on 7.1-channel playback systems. Not av ailable while speaker set B is on. Source f ormat Listening m[...]

50 Using the Listening Modes —Continued The A V receiv er’ s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. Pure Audio (not North American models) In this mode, the display and video circuitry are turned off, minimizing possible noise sources for the ultim[...]

51 Using the Listening Modes —Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1-channel playback. Use it with D VDs that bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack. DTS Neo:6 This mode expands an y 2-channel source for 6.1-chan- nel playback[...]

52 Using the Listening Modes —Continued W ith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts ev en when listening at low v olume lev els—ideal for watching movies late at night when you don’t w ant to disturb anyone. Notes: • The effect of the Late Night function de[...]

53 Using the Listening Modes —Continued The Audio Adjust settings are explained belo w . Input Channel Settings ■ Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output ([...]

54 Recor ding This section explains ho w to record the selected input source to a component with recording capability , and how to record audio and video from dif ferent sources. Y ou can only record to a component that’ s connected to the T APE OUT or VIDEO 1 OUT jacks. See pages 20–31 for information on connecting your A V components. Notes: [...]

55 Ad v anced Setup Crosso ver Frequency This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 34. To get the best bass performance from your speaker sys- tem, you need to set the crossov er frequency according to the size and frequency response of your speakers. Notes: •F or a more a[...]

56 Adv anced Setup —Continued Speaker Distance W ith these settings, you can specify the distance from each speaker to the listening position. Notes: • The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For e xample, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer dista[...]

57 Adv anced Setup —Continued Note: •A quick way to adjust the speak er lev els is to press the remote controller’ s [TEST TONE] b utton to turn on the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the lev els, and use the [CH SEL] button to select the speakers. The following table sho ws the display indicator for each digita[...]

58 Adv anced Setup —Continued When using progressiv e scanning on your D VD player , you may find that the picture and sound are out of sync. W ith this setting, you can correct this by delaying the audio signals. Y ou can set it from 0 to 100 milliseconds (ms) in 20 millisecond steps. Note: • This setting is not av ailable when the Pure Audio[...]

59 Contr olling Other Components Y ou can use the A V receiv er’ s remote controller (RC-647M) to control your other A V components, including those made by other manufacturers. This sec- tion explains ho w to enter the necessary remote control code for the component that you want to control (e.g., D VD player , TV , or VCR). To control another c[...]

60 Controlling Other Components —Continued Onkyo components that are connected via are con- trolled by pointing the remote controller at the A V receiv er, not the component. This allo ws you to control components that are out of view , in a rack, for example. If you want to control an Onkyo component by pointing the remote controller directly at[...]

61 Controlling Other Components —Continued To control another component, point the remote contr oller at it and use the buttons explained below . (Y ou must select the appropriate r emote control mode first.) With some A V components, certain buttons may not work as expected, and some may not work at all. ■ Controlling a TV A [ON/ST ANDBY], TV[...]

62 Tr oubleshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. Can’t turn on the A V receiver • Make sure that the po wer cord is plugged into the wall outlet properly . • Unplug the power cord from the w all outlet, wait 5 seconds or more, then plug it in again. The A V receiver turns off as soon a[...]

63 Tr oubleshooting —Continued • The surround back speakers are not used with all lis- tening modes. Select another listening mode (page 50). • Not much sound may be produced by the surround back speakers with some sources. • Make sure the speakers are configured correctly (page 34). The subwoof er produces no sound • The subwoofer outpu[...]

64 Tr oubleshooting —Continued The remote controller doesn’t w ork • Make sure that the batteries are installed with the cor - rect polarity (page 11). • Make sure that the remote controller is not too far aw ay from the A V receiver, and that there’ s no obstruction between the remote controller and the A V receiv er’ s remote control [...]

65 Tr oubleshooting —Continued The following settings can be made for the S-Video and composite video inputs Y ou must use the buttons on the unit to make these set- tings. 1. While holding down the input selector b utton for the input source that you want to set, press the [SETUP] button. 2. Use the Up and Down [ ]/[ ] buttons to select a settin[...]

66 Specifications Amplifier Section Video Section T uner Section ■ FM ■ AM General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs Specifications and features are subject to change without notice. Rated Output Power (FTC) All channels: 75 watts minimum continuous po wer per channel, 8 ohm loads, 2 channels driven fr o[...]

67 Memo TX-SR504_En.book Page 67 Thursday, February 2, 2006 3:46 PM[...]

68 SN 29344181 I0602-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebe[...]

C s C t F r S v D e E s E n I t N l Remote Contr ol Codes 1. While holding down the REMO TE MODE button that y ou want to set, press the [DISPLA Y] button f or 3 seconds. 2. Use the number buttons to enter the 4-digit remote contr ol code. Codes de télécommande 1. Maintenez le bouton REMO TE MODE à initialiser enfoncé et appuyez sur le bouton [[...]

2 D VD Codes DVD D VD Player Acoustic Solutions 0730, 0713 Advent 1016 Aiwa 0641 Akai 0899, 1115 Akura 0898 Amoisonic 0835 Amphion Media Wor k s 0872 Amstrad 0713 AMW 0872 Apex Digital 0755, 0794, 0830, 1020, 1061 Aspire Digital 1168 Audio vo x 1071, 1121, 1122 Axion 1071, 1193 Blue Nov a International 1321 Broksonic 1419 Bush 0516, 0690, 0713 Camb[...]

3 CD/MD/CDR/HDD Codes M D/CDR HDD C D CD Player Anthem 0897 Bush 0388 Carver 0179 Classic 1297 Copland 0393 Denon 0034, 0766 Dynamic Bass 0179 Fisher 0179, 1325 Garrard 0393 Genexxa 0426 GoldStar 1208 GPX 1296 Harman/Kardon 0173, 0426, 1202 HHB 0192 Inkel 0180 JVC 1294 K enwood 0826, 0028, 0037 KLH 1373 LG 1208 Magnav ox 0038 Marantz 0038, 0180, 04[...]

4 TV Codes TV TV 888 0264 Acura 0009 Addison 0653, 0108, 0092, 1150 Admiral 0463, 0163 Advent 0761, 0783, 0815, 0842 Aiko 0092 Aiwa 0701, 1180 Akai 0060, 0812, 0702, 0030, 0264, 0218, 0009, 0208, 0672, 0729, 0745, 0753, 1207 Akura 0264, 0218 Alba 0037, 0218, 0009, 0371 Albatron 0700 Alfide 0672 America Action 0180 Amstrad 0171, 0037, 0009, 0371 An[...]

5 TV GE 0047, 0051, 0451, 0180, 0030, 1447, 1454, 0560, 0092, 1147, 1347 GEC 0037 Geloso 0009 Genexxa 0218, 0163 Gibralter 0017, 0030 Gintai 1150 Go Video 0886 GoldStar 0154, 0030, 0037, 0001, 0056, 0109, 1150, 1378 Goodmans 0037, 0634, 0343, 0360, 0371, 0374 Gorenje 0370 GPM 0218 Gradiente 0053, 0056, 0170 Graetz 0714, 0163 Granada 0037, 0208 Gran[...]

6 TV Codes TV TV NEC 0154, 0156, 0051, 0053, 0030, 0264, 0508, 0009, 0056, 0170, 1150, 1182, 1378, 1456 Neck ermann 0556, 0037 NEI 0037 Netsat 0037 New av e 0009, 0092, 0161, 1150 Nikkai 0037, 0264, 0218, 0035 Nikko 0030, 0092 Noble x 0154 Nokia 0548, 0606, 0480, 0631 Norcent 0748, 0824 Nordmende 0560, 0109, 0343 NTC 0092 Oceanic 0163 Onwa 0180 Opt[...]

7 TV T eac 0037, 0698, 0712, 0264, 0009, 0418, 1149 T echnics 0250, 0051 T echnisson 0714 T echwood 0051, 0056 T eco 0051, 0264, 0218, 0653, 0009, 0092 T eknika 0054, 0180, 0150, 0060, 0056, 0092 T eleavia 0343 T elefunken 0702, 0625, 0056, 0109, 0335, 0343, 0896 T eletech 0009 T ensai 0218 Te ra 0030, 0092 Te vion 0767 Te xe t 0218 Thompson 0625 T[...]

8 VCR Codes VCR VCR ABS 1972 Admiral 0209, 0479 Aiwa 0348, 0307, 0352, 0124, 0479, 1291 Akai 0041, 0315, 0175 Akiba 0072 Alba 0209, 0072, 0352, 0315 Alienware 1972 American High 0035 Amoisonic 0479 Anam 0162, 0226, 0480, 1037 Anam National 0162, 1562, 0226 Anitech 0072 Baird 0041 Basic Line 0072 Blaupunkt 0162, 0226 Brandt 0320 Brandt Electronique [...]

9 VCR Sany o 0047, 0046, 0159, 1330 Saville 0352 Schaub Lorenz 0041 Schneider 0072 Scott 0184, 0121 Sears 0035, 0047, 0046, 1237 Seleco 0041 Sharp 0209, 0807, 0848, 1285 Shintom 0072 Singer 0072 Sonic Blue 0614, 0616 Sonolor 0046 Sony 0035, 0033, 0636, 1032, 1232, 1295, 1296, 1447, 1448, 1636, 1972 Stack 9 1972 Sunkai 0348 Sylvania 0035, 0593, 1593[...]

10 CABLE/SA T Codes CABLE SA T Cable Con verter ABC 0003, 0008, 0033 Americast 0899 Amstrad 1222 Bell South 0899 British T elecom 0003 Cable & Wireless 1068 Clearmaster 0883 ClearMax 0883 Contec 0019 Coolmax 0883 Daeryung 0877, 1877, 0477, 0008 Digeo 1187 Director 0476 DX Antenna 1500 Filmnet 0443 Fr ance T elecom 1734 Fujitsu 1497 Funai 0019 G[...]

11 Satellite Receiver Hirschmann 0173 Hisense 1535 Hitachi 0819, 1250, 1284, 1525 HTS 0775, 1775 Hughes 0749, 1749, 1442 Hughes Network Systems 1142, 0749, 1749, 1442, 1443, 1444 Humax 1176, 1427, 1675 iLo 1535 Indovision 0887 ISkyB 0887 Jerrold 0869 JVC 0775, 0492, 1170, 1531, 1775 Kathrein 0173, 0200, 0442, 0480, 0504, 0622, 0658, 1416, 1567 Krei[...]

12 SN 29344188A I0603-2 647 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 G[...]