Optoma EW675UT manuale d’uso

1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings ..........................5 Product Features ................................5 Introduction ....................[...]

2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq[...]

3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user ’s guide. ▀ ■ W arning- Do not look into the projector ’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ W arning- T o reduce the risk of re or electric shock, do not expose this projec[...]

4 English Usage Notice Do:    T urn off and unplug the power plug from the AC outlet before cleaning the product.    Use a soft dry cloth with mild detergent to clean the display housing.    Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not:    Block the s[...]

5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, us[...]

6 English Introduction Documentation :  User ’s Manual  W arranty Card  Quick Start Card  WEEE Card (for EMEA only)  Due to different applications in each country , some regions may have different accessories. Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts [...]

7 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 Product Overview 1. Control Panel 2. IR Receivers 3. Cable Cover 4. Speaker 5. T ilt-Adjustment Feet 6. Mirror Cover 7. Input / Output Connections 8 Power Socket 9. [...]

8 English Introduction 9 3 4 1 6 1. Lamp LED 2. T emp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu Control Panel 10 7 5 2 8[...]

9 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 Input/Output Connections 1. 12V T rigger Relay (12V , 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3. 3pin Mini-din RS232 4. Composite Video Input 5. S-Video[...]

10 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 8. V olume +/- 9. 3D 10. A V mute 1 1. V ideo 12. PC/Mouse control 13. Mouse Left Click 14. Enter/Help 15. Source 16. Keystone +/- 17. Menu 18. Brightness 19. HDMI 20. S-Video 21. Numbered k[...]

11 English Installation Removing and Attaching the Cable Cover Connecting the Projector 1 2 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover . 1 2. Lift up and remove the cable cover . 2 Install the cable cover by reversing the previous steps. Cable Cover[...]

12 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 m o l e x MOLEX E62405SP R Connect to Computer/Notebook 1 2 4 5 1...................................................................................................[...]

13 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 E62405SP R Connect to Video Sources 1................................................................................. *Audio Cable RCA/RCA 2.......................[...]

14 English Installation or Powering the projector On / Off  Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Securely connect the pow er cord and signal cable. When connected, the POWER/ST ANDBY LED will turn Amber . 2. T urn on the lamp by pressing “ ” button either on the top of the projector[...]

15 English Installation  Contact the nearest service center if the projector displays these symptoms. See pages 68-69 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP” LED indicator is lit red and if “ POWER/ST ANDBY ” indicator ashes ambe[...]

16 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height T ilt-Adjustment Feet T ilt-Adjustment Ring The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the adjustable ring clockwise to raise the [...]

17 English Installation Adjusting the Projector ’ s Focus T o focus the image, rotate the focus ring until the image is clear .  XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm).  WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 mm). FO CU S Focus Ring Adjusting Pr[...]

18 English Installation Screen Size (B) (C) (D) (E) (α) Diagonal Width (W) Height (H) inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree 77 1956 65 1659 41 1037 31 777 6 153 10 259 19 495 55.3 80 2032 68 1723 42 1077 32 808 7 174 11 269 20 516 55.3 85 2159 72 1831 45 1 144 34 858 8 214 11 286 22 568 55.3 87.2 2215 74 1878 46 1 174 35 8[...]

19 English User Controls Using the Control Panel Power/ Standby but - ton and LED Refer to the “Power On/Off the Projector” section on pages 14-15. Indicate the projector ’s status. RE-SYNC Automatically synchronize the projector to the input source. Enter Conrm your item selection. SOURCE Press “SOURCE” to select an input signal. Menu[...]

20 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 14-15. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down. Enter / Help Conrm your item selection. Help Menu (refer to page 22). Source Pr[...]

21 English User Controls Using the Remote Control A V mute Momentarily turns off/on the audio and video. S-Video Press “ S-Video ” to choose S-V ideo source. VGA Press “VGA” to choose VGA sources. Video Press “Video” to choose Composite video source.[...]

22 English User Controls Using the HELP button The HELP function ensures easy setup and operation.  Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu.[...]

23 English User Controls  Help menu button functions only when no input source is detected.  If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems.  Please refer to the “T roubleshooting” section on pages 52-56 for more details.[...]

24 English User Controls[...]

25 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selectio[...]

26 English User Controls Menu T ree EX665UTi OSD Menu Tree.xls Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC BrilliantColor™ 0~10 Color Temp. Warm / Medium / Cold Color Settings Color Space AUTO / RGB / YUV Input Source VGA1 / VG[...]

27 English User Controls EX665UT OSD Menu Tree.xls Main Menu Sub Menu Settings Setup Projector ID 0~99 Mute On / Off Volume 0~10 Audio Input Advanced Logo Optoma / Neutral / User Logo Capture Closed Captioning Off / CC1 / CC2 Exit Network Network State DHCP IP Address Subnet mask Gateway DNS Apply Yes / No Exit Options Source Lock On / Off High Alt[...]

28 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color .  Blackboard: This mode should be selected to achieve optim[...]

29 English User Controls Sharpness Adjust the sharpness of the image.  Press the to decrease the sharpness.  Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color .  Press the to decrease the amount of saturation in the image.  Press the to increase the amount of saturation in the [...]

30 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater .  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a ne[...]

31 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV . Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs that are not selected. Image AI I[...]

32 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. XGA  4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV . (576i/p)  16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide scre[...]

33 English User Controls WXGA  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  16:10: This format is for 16×10 input sources, like widescreen laptops.  LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens t[...]

34 English User Controls  Each I/O has different setting of “Edge mask”.  “Edge mask” and “Zoom” can’t work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Pr[...]

35 English User Controls 3D  Off: Select “Of f” to turn 3D settings off for 3D images.  DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images.  IR: Select “IR” to use optimized settings for IR-based 3D images. 3D Sync. Invert  Press the “On” to invert left and right frame contents.  Press the ?[...]

36 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Screen T ype Choose the screen type from16:10 or 16:9. Projection  Front-Desktop This is the default selection. The image is projected straig[...]

37 English User Controls  Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID denition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 62~66 for the complete list of RS232 com[...]

38 English User Controls SETUP V olume  Press the to decrease the volume.  Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector . Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than one video source. ?[...]

39 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Sync[...]

40 English User Controls SETUP | Security Security  On: Choose “On” to use security verication when the turning on the projector .  Off: Choose “Of f” to be able to switch on the projector without password verication. Security T imer Use thi s func tio n to set the how l ong (M onth /Day/H our) the proj ecto r can b e used. On c[...]

41 English User Controls  If the i nco rre ct pas sword is e ntered 3 tim es, th e proje ctor w ill automat ica lly shut dow n.  If you have forgotten your password, please contact your local ofce for support.[...]

42 English User Controls SETUP | Advanced Logo Use thi s func tio n to set the de sired st ar tup s cree n. If chan ges ar e made t hey will ta ke effe ct the n ext tim e the pr ojec tor is powe red on.  Optoma: The default startup screen.  Neutral: Logo is not displayed on startup screen.  User: Use stored picture from “Logo Capture” [...]

43 English User Controls SETUP | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another , when you exit the OSD menu, the new setting will take effect on next open.  On: Assign an IP address to the projector from an external DHCP ser[...]

44 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP , or manually enter the required network information. 2. Then choose apply and press “ ” button to complete the conguration process. 3. Open your web browse r and type in from the OSD LAN screen then the web page will display as below: How to use [...]

45 English User Controls When making a direct connection from your computer to the projector Ste p 1: Find an IP Address (192.168.0.100) from LAN function of projector . Step 2: Select apply and press “ Enter” button to submit function or press “ menu ” key to exit. Step 3: T o open Network Connections, click Start , click Control Panel , c[...]

46 English User Controls Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector , including projector ’s online status, system power , lamp life, network setting an[...]

47 English User Controls 3. Edit Attribute 4. Edit Event For more information, please visit http://www .crestron.com & www .crestron.com/getroomview .[...]

48 English User Controls Source Lock  On: The projector will only search current input connection.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster . This feature is useful in high altitude areas where the air is thin. Information Hide [...]

49 English User Controls Reset Dust Filter Choose “Y es” to show or “No” to hide the warning message when the changing lter message is displayed. Reset Choose “Y es” to return the display parameters on all menus to the factory default settings.[...]

50 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown timer interval. The countdown timer will sta[...]

51 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD: Choose “STD” to dim the projector lamp whi[...]

52 English Appendices No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp”[...]

53 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a Notebook: 1. First, follow the steps[...]

54 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance. See page 17. The image is stretched when displaying 16:9 DVD title  When you play anamorphic DVD or 16:9 DVD, the projector will show the best im[...]

55 English Appendices Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. T o replace the lamp, follow the procedures in the “Replacing the Lamp” section on pages 57-58. LED [...]

56 English Appendices On Screen Messages  T emperature warning:  Fan failed:  Lamp warning:  Out of display range:  Filter warning: If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .  Make sure there[...]

57 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea[...]

58 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover . 1 5. Lift up and remove the cover . 2 6. Unscrew the three screws on the lamp module. 3 7. Lift [...]

59 English Appendices Replacing and cleaning the dust lter We recommend cleaning the dust lter after every 300 hours of use, clean it more often if the projector is used in a dusty environment. When you see this message, please nd following steps for cleaning procedure:  If dust builds up on the lter is not cleaned, the projector [...]

60 English Appendices  For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.  120Hz input signals may be dependent on graphics cards support.  Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of image clarity . [...]

61 English Appendices Video Compatibility Computer Compatibility Mode Resolution V -Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 1152 × 870 75.06 68.68 MAC G4 640 × 480 60 31.35 i MAC DV 1024 × 768 75 60.00 i MAC DV 1152 × 870 7[...]

62 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 TXD 2 RXD 3 GND RS232 Commands and Protocol Function List 3 1 2  RS232 shell is grounded.[...]

63 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. XX=00-99, projector's ID, XX=00 is fo[...]

64 English Appendices ----------------------------- -------------------------------- ------------------------------- --------------------------------------------- ------------------------------------ ---------------------------------------------- ~XX39 11 7 E 30 30 33 39 2 0 31 31 0D Flash Driv e ~XX39 12 7 E 30 30 33 39 2 0 31 32 0D Presenter(LAN+[...]

65 English Appendices -------------------------- ---------------------------------- -------------------------------- --------------------------------- --------------------------------------------- --------------------------------- ---------------- ~XX81 n 7E 30 30 38 31 20 a 0D Vol ume n = 0 (a=3 0) ~ 20 (a=3 2 30) ~XX82 1 7E 30 30 38 32 20 31 0D L[...]

66 English Appendices -------------------------- ---------------------------------- -------------------------------- --------------------------------- --------------------------------------------- --------------------------------- ---------------- ~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone + ~XX140 16 7E 30 30 31 34 30 20 31 36 0D Keystone - [...]

67 English Appendices  Please note that damage resulting from incorrect installation will void the warranty . W all Mount Installation 1. T o prevent damage to you r projector , please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the [...]

68 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www .optoma.ca services@optoma.com [...]

69 English Appendices Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム info@osscreen.com サポ?[...]

70 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r[...]

71 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This devic[...]