Oricom TP170WP manuale d’uso

[...]

2 1 General Information W arnings It is very important that you read the User Guide carefully as it contains detailed information on installation, programming and operational issues which you will need to be a ware of to ensure the Care Phone oper ates proper ly . If you are not clear about how to install the phone or have any queries on any issue,[...]

3 • The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. • Setting the receiver v olume to maximum ma y , under some situations cause ear damage. We suggest returning the handset v olume control to the “0” position after each call. • Do not in[...]

4 2 Location of controls 1. T elephone Line J ack 2. Hook switch 3. Handset Holder 4. Delete Button 5. Call Back Button 6. Memory Buttons (M1, M2) 7. Speaker 8. Ke ypad 9. Receiver volume control 10 . Receiver volume LED 11. Powe r Ja ck 12 . New Call LED 13 . Display 14. / Buttons 15 . Ringer Hi/Mid/Low Switch 16 . SOS Button 17 . Menu Button 18. [...]

5 3 Installation 3. 1 Installing batteries (supplied) in the phone W arnings Y ou must install 4 AA Alkaline batteries in the phone base. The battery back up system will then be able to power the unit for up to 12 hours if there is a mains power failure. If your mains power has been turned off for an extended period or the power supply to the phone[...]

6 3. 4 W all Moun ting Method A. T o fit to an existing telephone wall plate with modular connector simply , 1. Press and lift out the handset holder on base. Rotate it 180°, and snap it into place (see A) so it will hold the handset in place when the phone is mounted on the wall. 2. Inser t the mounting bracket’ s two tabs into the matching slo[...]

7 4 Setting Up 4. 1 Setting the contrast 1. Press the MENU button. The display shows “ LCD CONTRAST ” . 2. Press the OK b utton. The display shows the current contrast setting with values between 1 and 5. 3. Press or to select the contrast level and confirm with OK button. 4. The displa y now shows to “ TIME/D A TE”, y ou can refer to ne xt[...]

8 4. 5 Receiver V olume Control The receiver volume control enables you to adjust the receiver volume on the handset. Rotate the button on the base to select a comf or tab le listening level (1-9), the red LED will turn on. WARNING Setting the receiver v olume to maximum ma y , under some situations cause ear damage. W e suggest returning the volum[...]

9 5.1 Pairing new pendants to the phone 1 . Press and release the MENU button until REMO TE PENDANT is sho wn. 2 . Press the OK button, 3 . Select P AIRING or DELETE by pressing the or , and confirm with the OK button. 5.2 Remote Pendant setting: If you select P ARING , the displa y will show P AIRING f or only 3 seconds. Immediately press and hold[...]

10 Pre Dialing a Call 1. Dial the number you wish to call the telephone will speak out the numbers as you dial them (with v oice option ON). T o correct a number press the DELETE button for each incorrect digit. 2. Pick up the handset, press CALL B A CK or press the SPEAKER button. 6. 2 Receiving a Call When you receive a call, the telephone rings,[...]

11 6. 5 Call waiting (Recall button) Y ou can use the recall function to answer a second call while y ou are on the phone. However this service will need to be turned on. For example to turn on T e lstr a’ s Call W aiting ser vice: 1. Lift the handset or press SPEAKER button. 2. W ait f or dial tone then Press *43# 3. Y ou will hear a ser vice an[...]

12 T o dial the numbers in the emergency MEMOR Y Buttons, simply pic k up the handset or press SPEAKER button and press M1 or M2 . Note: the numbers stored in M1 and M2 memory buttons are for manual dialing only and are not dialled in the emergency call function. 7. The Phone Book 7. 1 Storing numbers in the phone book Y ou can enter up to 30 names[...]

13 W ARNING Selecting the correct location is very important as this feature determines the sequence in which the emergency telephone numbers are dialled. Location 1 will be dialled first, then 2, then 3 etc. W ARNING: If you choose to o verwrite a location, the pre viously stored number will be erased. The unit announces “Name Recording for phon[...]

14 7. 2 T o revie w the Phone Book Memory 1. Press and release CID button until the phone symbol is shown. 2. Review the stored phone number by pressing or , or enter the first letter of the name of the person you wish to call. After a shor t time, the display will display the first stored telephone number and say the name if it was recorded. Y ou [...]

15 7. 5 T o Edit Phone Book Memories 1. Press and release CID button until phone book symbol is shown. 2. Select the required location by pressing or . 3. Press and hold MENU button f or two seconds. The displa y will show EDIT? . 4. Press OK button, the first digit of the selected phone number will flash. 5. Y ou can move the cursor to the require[...]

16 8 Emergency Call feature THE EMERGENCY CALL FUNCTION WILL NO T OPERA TE UNLESS ALL THE PROCEDURES IN THE USER GUIDE HA VE BEEN COMPLIED WITH. This feature allows you to summon assistance from the people in emergency phone list. 8. 1 Emergency Message T wo options are provided f or your emergency message: A . A pre-record message "This is an[...]

17 8. 5 T o activate the Emer gency Call function: 1 . Press and hold the button on the pendant or the SOS emergency button on the telephone f or three seconds. The telephone will beep loudly f or 15 seconds. (If during this time the emergency SOS button on the phone, or the button on the pendant is pressed for more than three seconds, the emergenc[...]

18 9 . Caller ID Important: T o use Caller ID functions the CLIP symbol must be on. If the CLIP symbol is not visible on the displa y , press the CID button once. 9. 1 Receiving a Call (Can be stored up to 64 calls) • If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -ERROR- . • If only the caller's pho[...]

19 9. 3 Deleting Numbers from the Caller ID Memory 1. Select the required Caller ID memory location by using the or button. 2. T o delete single memor y , press DELETE button once. The display will show the DELETE? . Press DELETE b utton for 2 seconds. The data f or that call will be erased, and the CALL# and Caller ID information will be updated. [...]

20 1 0 . Important Information 10.1Pe rio dic tes tin g Remote Pendant We recommend you check and test the remote pendant and SOS button function e very month. T o ensure that it is working correctly . The remote pendant battery should last for up to 2 years but we recommend changing it every 12 months or sooner if the red light on the pendant beco[...]

21 10.3 Consumer Support and T roubleshooting If you feel this product is not working correctly please consult this user guide and ensure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket. If the fault is still present, connect an[...]

22 (ii) negligence on your part or misuse by you of the product; (iii) any un-controlled external cause to the phone not functioning including but not limited to electricity failure, lighting, over voltage; (iv) non adherence by you to the warnings in the User Guide and the User Guide generally; and (v) modification to the product or services carri[...]

[...]

2LMC70YY[...]