Panasonic KX-TG5871AL manuale d’uso

This unit is comp atible with Caller ID. T o use this feature, you must subscribe to the appropriate service of fered by your service provider . Please read these Operating Instruct ions before using the unit and save for future reference. Charge the battery for 6 hours before initial use. 5.8 GHz Expandable Digital Cordless Answering System Model [...]

T able of Contents 2 Introduction About these operating instructions . . . . . 4 Accessory informat ion . . . . . . . . . . . . . . 5 Expanding your phone . . . . . . . . . . . . . . 6 Available accessory handsets . . . . . . 7 Important safety inst ructions . . . . . . . . . 8 For best performance . . . . . . . . . . . . . . 10 Preparation Connect[...]

T able of Contents 3 Dial lock . . . . . . . . . . . . . . . . . . . . . 52 Memory status (Colour d isplay models only) . . . . . . . . . . . . . . . . . . . . . . . . . 53 Display setting L (Colour displa y models only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Wallpaper . . . . . . . . . . . . . . . . . . . . 54 Handset display col[...]

Introduction 4 Thank you fo r purchasing a Panas onic cordless telephone . We recommend keeping a record of the following information for future re ference. Att ach your purchase receipt here. About these operating instructions These operating instructions can be us ed for the KX-TG5871AL, KX-TGA580AL, and KX- TGA582AL. Notable differences between [...]

Introduction 5 Accessory information Included acces sories Additional/replaceme nt accessories No. Accessory items Quantity 1 AC adaptor for base unit 1 2 Telephone line co rd 1 3 Telephone plug 1 4 Wall mounting adaptor 1 5 Battery 1 6 Handset cover 1 7 Belt clip 1 8 Audio cable 1 12 3 45 6 78 Accessory items Order number Rechargeable nickel metal[...]

Introduction 6 Exp anding your phone The KX-TG5871AL includes one handset and one ba se unit. Y ou can expand the system by adding up to 7 accessory handsets, sold separately . A maximum of 8 ha ndsets can be registered to a base unit. Any combination of the 2 available accessory handsets is possible. Note: L The included handset is pre-registered [...]

Introduction 7 A vailable accessory h andsets 2 accessory handset models are available for the KX-TG5871AL. Operations and features of 2 different accessory handsets have certain differences as indicated in the table below . *1 USB-support allows you to connect the handset to your PC and send picture s and songs from your PC to the ha ndset, as we [...]

Introduction 8 Import ant safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury . 1. Read and understand all instructions. 2. Follow all warnings and instru ctions marked on this unit. 3. Unplug this unit from power outlets before cleaning. D o not[...]

Introduction 9 L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible. L T o p revent the electric shock, use only the included audio cable with the transformer when conne cting the unit to an audio device. Battery T o reduce the r[...]

Introduction 10 may void the EMC compliance of the system or the peripherals. For best perfor mance Base unit location/ noise The base unit and handset use radio waves to communicate with each other . For maximum distance and noise-free operation, we recommend the follo wing: L Placing the unit away from electrical appliances such as a TV , persona[...]

Preparation 11 Connections Note: L Use only the included Panasonic AC adaptor PQL V1AL. L The AC adaptor must rema in connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically ori ented or floo r-mounted AC outlet. Do not connect th e AC adaptor to a ceiling-mounted AC outle[...]

Preparation 12 If you subscribe to an ADSL service L Please attach a noise filter (contact your ADSL provider) to the telephone lin e between the base unit and the telepho ne line jack in the event of the fo llowing: – Noise is heard during conversations. – Caller ID features (page 32) do not function properly . Battery inst allation 1 Insert t[...]

Preparation 13 Battery charge Place the handset on the base unit for 6 hours before initia l use. L The unit will beep once, the CHARGE indicator will lig ht, and “ Charging ” will be displayed. L “ Charge completed ” is displayed when the battery h as been fully charged. The CHARGE indi cator will remain lit. Note: L T o ensure th e batter[...]

Preparation 14 Battery replacement If battery performance diminishes, make sure you have cleane d the charge contacts and fully charged the battery . The battery needs to be replaced if any of the following are displayed after a few phone calls even when you have fully charged the battery . –“ Recharge battery ” – 3 (flashing) –“ Charge[...]

Preparation 15 Controls and displays Controls Base unit A Display B { ERASE } C { ANSWER ON } ANSWER ON indicator D Navigator key E { MEMO } F MESSAGE indicator G { MESSAGE } H { STOP } I { GREETING REC } (Recording) J { GREETING CHECK } K Antenna L Speaker M Charge contact s N { PROGRAM } { AUT O } O { MUTE } P { CALL W AIT } { RECALL } Q { REDIAL[...]

Preparation 16 Handset A Speaker B Soft keys C Headset jack /Audio jack D {C} (T ALK) E Joystick F {s} (SP-PHONE) G USB cable jack (colour display models: KX-TGA582AL only) H { REDIAL } { P AUSE } I Ringer indicator Message indicator J Receiver K Display L { OFF } M { CLEAR } { MUTE } N { INTERCOM } { HOLD } O Microphone P Charge contact s Using th[...]

Preparation 17 Displays Base unit display items Handset display items *1 Monoc hrome display mode ls: KX-TG5871AL and KXTGA580AL only *2 Colour display models: KX-TGA582AL only Displayed item Meaning E Flashes when the d ate and time need to be set. E Flashes when message memory is full. O Base unit ringer is off. E Greeting or memo message recordi[...]

Preparation 18 Handset menu icons When in standby mode, pushing the centre of joystick reveals the handse t’s main menu. From here yo u can access various features and settings. Important: L The menu icons shown in these instructions vary slightly fro m the actual icons shown on th e display . Monochrome display mod els: KX- TG5871AL and KX-TGA5 [...]

Preparation 19 Setting the unit before use Setting the date and time O 1 Press { MENU } (centre of joystick). 2 Scroll to O , then press { SELECT } . 3 Scroll to “ Date and time ”, then press { SELECT } . 4 Enter the current day, month, and year by selecting 2 di gits for each. Example: 15 June, 2005 Press { 1 }{ 5 } { 0 }{ 6 } { 0 }{ 5 } . 5 E[...]

Making/Answering Calls 20 Making calls using the handset 1 Lift the handset and press {C} . L “ Talk ” will be displayed. 2 Dial the phone n umber. 3 When finished talking, press { OFF } or place the handset on the base unit or charger. Note: L The IN USE indicator on the base unit lights while the handset user is on an outside conversation. T [...]

Making/Answering Calls 21 T o make a ca ll using the redial list The last 5 phone numbers dialled are stored in the redial li st. 1 Press { REDIAL } . L The last number d ialled will be displayed. 2 Push the joystick up or down repeatedly to display the desired numbe r. L T o delete the disp layed number , press { CLEAR } . L T o exit the list, pre[...]

Making/Answering Calls 22 Clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary . This feature will turn off when you hang up or put a call on hold. It will not turn off automatically during a cal[...]

Making/Answering Calls 23 Making calls using the base unit 1 Press { SP-PHONE } . L The SP-PHONE and IN USE indicato rs light. 2 Dial the phone n umber. 3 When the other party answers, speak into the MIC. 4 When finished talking, press { SP- PHONE } . L The SP-PHONE and IN USE indicato rs go out. Note: L T alk a lternately with the caller in a quie[...]

Making/Answering Calls 24 Call share When another extension is on an outside call, this feature al lows you to join th at call. T o join a conversation, press { SP- PHONE } when another extension i s on an outside call. L A maximum of 4 parties including the outside party can join a conversation. RECALL button Pressing { RECALL } allows you to use [...]

Making/Answering Calls 25 Answering calls using the base unit When a call is being received, the IN USE indicator flashes rapidly . 1 Press { SP-PHONE } . 2 Speak into the MIC. 3 When finished talking, press { SP- PHONE } . Adjusting the ringer volume 4 levels (high/medium/low/off) are available. While the base unit is not being used , press {V} or[...]

Phonebook 26 Handset phonebook The handset phonebook all ows you to make calls without havin g to dial manually . Y ou can add 50 names and phone numbers to the handset phone book and search for phonebook en tries by name. Important: L KX-TGA582AL only: Y ou can also create and edit phoneb ook items using your PC and send them to the handset. Refer[...]

Phonebook 27 Character table The dial keys can be used to enter characters. T o enter a character, press the appropriate dial key , repeatedly if necessary . T o enter anoth er character that is located on the same dial key , first push the joystick right to move the cursor to the next space. T o edit/corr ect a mist ake Use the joystick to move th[...]

Phonebook 28 Adding items/calling someone in the phonebook using the unit’ s menu P (Monochro me display models only) Important: L Only the KX-TG5871AL and KX- TGA580AL support this feature. Monochrom e display model users can also enter the phonebook from the handset’s main menu. 1 Press { MENU } (centre of joystick). 2 Scroll to P , then pres[...]

Phonebook 29 Chain dial feature This feat ure allows you to dial phone numbers from the phonebook while you are on a call. Example: Using a long distance calling card 1 Dial from the phonebook: 08000123456 (Calling card access number). 2 When prompted, dial from the phonebook: 1234 (Calling card PIN). 3 When prompted, dial from the phonebook: 05550[...]

Phonebook 30 7 Press { OFF } . Copying all i tems 1 Press { C } (right soft key). 2 Press { COPY } . 3 Scroll to “ All items ”, then press { SELECT } . 4 Scroll to the d estination handset’ s number, then press { SEND } . L When all items h ave been copied, “ Complete ” will be displayed. L The destination handse t display will show “ P[...]

Speed Dialler 31 Base unit speed dialler The base unit speed dialler all ows you to make calls without havin g to dial manually . Y ou can assign one phone number to each of the 10 dial keys ( { 0 } to { 9 } ) on the base unit. Adding phone numbers to the speed dialler Important: L Before storing phone numbe rs, make sure the base unit is not being[...]

Caller ID Service 32 Using Caller ID service This unit is Caller ID compatible. T o use Caller ID features, you must subscribe to your telephone company’s Caller ID service. Caller I D features When an outside call is being receive d, the calling party’ s phone numb er will be displayed. Phone numbers for the last 50 different callers will be l[...]

Caller ID Service 33 T alking Caller ID This featu re allows you to kno w who is calling without looking at the display . When a call comes in, the handset and b ase unit will announce the caller ’ s name displayed on the handset following every ring. T o use this f eature, you m ust subscribe to your telephone company’s Caller ID service. Impo[...]

Caller ID Service 34 Ringer ID and light-up ID This feature can help you identify who is calling by using different ringers and rin ger indicator colours for different callers stored in the phonebook. Y ou can assign a different ringer and indicator colour to ea ch phonebook item. When a call is receive d from a caller stored in the phonebook, the [...]

Caller ID Service 35 1 Press { C } (right soft key). 2 Push the joystick up or down repeatedly to display the desired item. 3 Press { OPTION } . 4 Press { 3 } to select “ Picture ID ”. 5 To select a preset picture, scroll to “ Fixed data ”, then press { SELECT } . OR To select your origin al picture, scroll to “ User data ”, then press [...]

Caller ID Service 36 Displayed symbols L If the same caller calls more than once, it will be displayed with th e number (“ ×2 ” to “ ×9 ”). Only the da te and time o f the most recent call will be stored. L A Q is displayed next to items which have already been viewed or answered on this handse t. Editing a caller ’ s phone number befor[...]

Intercom Feature s 37 Intercom Intercom calls can be made betwe en the handset and the base unit, and between the included handset and a compatible Panasonic handset (page 5). Call the desired unit by selecting th e extension number ( ! to ) ), shown in the upper right of each ha ndset’s display . The base unit’s extension number is 0. L The ba[...]

Intercom Feature s 38 V oice p aging The base unit user can make a voice announcement that is heard through the speakers of all handsets. 1 Press { INTERCOM } , then press {*} ( A ). L Y ou will hear a ringb ack tone (2 short beeps) and the SP-PHONE indicator will flash. 2 When the SP-PHONE indicator stops flashing, speak into th e MIC. L All hands[...]

Intercom Feature s 39 call will ring at your handset agai n. If you still do not answer the call within 4 minutes, the call will be disconnected . T ransferring a call from the base unit Important: L When you page all handsets, only the handset user who an swers first can take the transferred call. 1 During an outsi de call, press { INTERCOM } . L [...]

Intercom Feature s 40 Conference calls A conference call allows the handset and the base unit or a compatible Panasonic handset (page 5) to speak together with an outside party . Using the handset 1 During an outsi de call, press { INTERCOM } . L The call will be put on hold. 2 To page the base unit, press { 0 } . To page another handset, press its[...]

Intercom Feature s 41 Room monitor This feature allows you to listen in on a room where the handset or base unit is located. The monitored exten sion will not ring, allowing you to easily monitor , for example, a baby’s room from different areas of the house. If you want to prevent your unit from being monitored by other extensions, leave this fe[...]

Intercom Feature s 42 Monitoring with the base unit 1 Press { INTERCOM } , then press { MUTE } . 2 To call the desi red handset, press its extension number ( { 1 } to { 8 } ). L The base unit will start to monitor the room through the handset. 3 To end monitoring, press { INTERCOM } or { SP-PHONE } . L The monitored han dset user can stop being mon[...]

Programmable Settings 43 Guide to handset programming For your reference, a chart of all progra mmable functions is printed be low . Details for each item can be found on the corresponding pages. T o programme, press { MENU } (cent re of joystick), push the joystick up, down, lef t, or right to scroll through the menu, an d press { SELECT } when th[...]

Programmable Settings 44 Colour display models: KX-T GA582AL only Initial setting N Talking CallerID –5 5 Set area code –5 5 Room monitor –4 1 LCD contrast –5 6 Key tone –5 6 Auto talk –5 6 Interrupt tone –5 6 Set base unit Ringer volume *1 57 Ringer tone *1 57 Interrupt tone *1 58 Room monitor *1 41 Talking CallerID *1 58 Set tel lin[...]

Programmable Settings 45 *1 If you programme these settings using one of the handsets, you will not need to programme the same item using another handset. Function M Voice enhancer –5 2 Dial lock *1 –5 2 Memory status –5 3 Initial setting N Talking CallerID –5 5 Set area code –5 5 Room monitor –4 1 Key tone –5 6 Auto talk –5 6 Inter[...]

Programmable Settings 46 Programming via direct commands Y ou can also programme fea tures using “direct commands”—special codes that take you directly to the feature you wish to progra mme and allow yo u to select the desired settin g. There is no need to scroll through the unit’s menus. Details of each feature can be found on the correspo[...]

Programmable Settings 47 LCD contrast (Handset) { 1 } { 4 } { 5 } { 1 } : Level 1 { 2 } : Level 2 { 3 } : Level 3* { 4 } : Level 4 { 5 } : Level 5 { 6 } : Level 6 55, 56 Ringer volume (Handset) { 1 } { 6 } { 0 }{ 1 } : Low { 2 } : Medium { 3 } : High* { 0 } : Off 49 Ringer tone Tone & Melody (Handset) { 1 } { 6 } { 1 } Scroll to “ Tone & [...]

Programmable Settings 48 Direct commands char t (Colour display mo dels: KX-TGA582AL only) Call screening { 3 } { 1 } { 0 }{ 1 } : On* { 0 } : Off 69 Message alert { 3 } { 4 } { 0 }{ 1 } : On { 0 } : Off* 69 Ringer volume (Base unit) {*} { 1 } { 6 } { 0 }{ 1 } : Low { 2 } : Medium { 3 } : High* { 0 } : Off 57 Ringer tone (Base unit) {*} { 1 } { 6 }[...]

Programmable Settings 49 Ringer settings K Handset ringer volume 4 levels (high/medium/low/off) are available. 1 Press { MENU } (centre of joystick). 2 Scroll to K , then press { SELECT } . 3 Scroll to “ Ringer volume ”, then press { SELECT } . 4 Push the joystick up or down repeatedly to select the desired volu me. L T o turn the ringer off, p[...]

Programmable Settings 50 – the caller hangs up before you answer the call. – another person answers the call using another phone connected on the same line. L The preset song “ Demo1 ” in this product is used with permission of © 20 05 S peed Crazy . L The preset song “ Demo2 ” in this product is used with permission of © 2005 M- ZoNE[...]

Programmable Settings 51 11 Press { SAVE } , then press { OFF } . 12 Disconnect the audi o cable from the handset. Note: L KX-TG5871AL and KX-TGA580AL onl y: The total recording time i s 90 seconds. L KX-TGA582AL only: Recorded songs ar e stored in the same memory storage space as d ownloaded pictures. If no pictur es are stored in th e memory , th[...]

Programmable Settings 52 Function M V oice enhancer Y ou can turn the voice e nhancer feature on or off. 1 Press { MENU } (centre of joystick). 2 Scroll to M , then press { SELECT } . 3 Scroll to “ Voice enhancer ”, then press { SELECT } . 4 Push the joystick up or down repeatedly to select “ On ” or “ Off ”. L When turned on, W will be[...]

Programmable Settings 53 Memory st atus (Colour display models only) Important: L Only the KX-TGA582AL supports this feature. Y ou can confirm the amount of handset memory used for your pict ures, wallp aper patterns, and songs. A maximum of 126 individual files can be stored in memory (in additi on to the preset pictures and songs). Depending on t[...]

Programmable Settings 54 Display setting L (Colour display models only) Important: L Only the KX-TGA582AL supports these features. W allp aper Y ou can select the “wallpaper” pattern shown on the display in standby mode. There are 3 preset patterns. Y ou can also down load your original pictures from a PC. Refer to the help section of the GIGAR[...]

Programmable Settings 55 Handset display colour (Appearance) Y ou can select the desired display co lour . 1 Press { MENU } (centre of joystick). 2 Scroll to L , then press { SELECT } . 3 Scroll to “ Appearance ”, then pr ess { SELECT } . 4 Push the joystick up or down repeatedly to select the desired colour. 5 Press { SAVE } , then press { OFF[...]

Programmable Settings 56 Handset LCD contrast (Monochrome display models only) Important: L Only the KX-TG5871AL and KX- TGA580AL support this feature. Y ou can adjust the h andset display contrast. There are 6 levels. 1 Press { MENU } (centre of joystick). 2 Scroll to N , then press { SELECT } . 3 Scroll to “ LCD contrast ”, then press { SELEC[...]

Programmable Settings 57 4 Scroll to “ Set recall time ”, then press { SELECT } . 5 Push the joystick up or down repeatedly to select the desired setting. 6 Press { SAVE } , then press { OFF } . Note: L Y ou can access T elstra’s “EASY CALL” service by having the recall time set at 100 ms, and then follow T el stra’s “EASY CALL” ins[...]

Programmable Settings 58 Base unit interrupt tone This tone lets you know when you receive a call while yo u are on an intercom ca ll or monitoring a room. “ 2 ”: The tone will sound 2 times. “ On ”: The tone wil l sound for as long as the line rings. “ Off ”: Turns this feature off. 1 Press { MENU } (centre of joystick). 2 Scroll to N [...]

Programmable Settings 59 Registering the handset If you want to use the handset with a different base unit of the same model, register it to that base unit. The handset will be given a new extension n umber of that base unit. Important: L Before registering, make sure the base unit and the other handsets are not being used. L Have the handset and b[...]

Answering System Features 60 Answering system The unit contains an answering system which can answer and record calls for you when you are unava ilable to answer the phone. For details about memory capacity , see page 65. Important: L Only 1 person can access the answerin g system (listen to messages, record a greeting message , etc.) at a time. L [...]

Answering System Features 61 T o play ba ck the greeting message Press { GREETING CHECK } . Erasing your greeting message Press { GREETING CHECK } , and then press { ERASE } while your greeting message is playing. L If you do not re-record your greeting message, the unit will use a pre- recorded greeting message. Pre-recorded greeting message If yo[...]

Answering System Features 62 Listening to messages When new messages have been recorded: – The MESSAGE indicator on the base unit will flash. – The message indi cator on the h andset will flash slowly if the message alert feature is turn ed on (page 69). The base unit display will show the number of messages (old and new) recorded by the answer[...]

Answering System Features 63 L The unit will announce “ No messages ”. Note: L Caller informa tion for the era sed messages will remain in the caller list. Listening to messages using the handset When new messages have been recorded, “ New message ” is displayed . L Colour display models (KX-TGA582AL only): If you have both new messages and[...]

Answering System Features 64 Answering system co mmands Y ou can also operate the answering system by pressing dial keys. T o use the fol lowing commands, press { MENU } (centre of joystick), then press { PLA Y } . *1 If pressed within the first 5 seconds of a message, the previous message will be played . *2 T o resume operation , press a command [...]

Answering System Features 65 Memory cap acity The total recording capacity (including your greeting message, calle r messages, and voice memos) is about 1 6 minutes. A maximum of 64 messages (i ncluding a greeting message) can be record ed. L If message memory becomes full: – E flashes on the base unit. – the ANSWER ON indi cator flashes rapidl[...]

Answering System Features 66 V oice guidan ce During remote operatio n, the unit’s voice guidance will prompt you to press { 1 } to perform a specific operation, or press { 2 } to listen to more available ope rations. Operations are presented by voice guidance in the foll owing order: – Play back all messages – Play back new messages – Reco[...]

Answering System Features 67 Skipping the greeting mes sage to leave a message Y ou can leave a message just as any outside caller can. Call your phone number , then press {*} to skip the greeting message and record your message after the beep. Answering system settings J Remote code A remote code must be entered when operating the answeri ng syste[...]

Answering System Features 68 Ring count Y ou can change the number of times the phone rings before the uni t answers calls. Y ou can select 2 to 7 rings or “ Toll saver ”. “ Toll saver ”: The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring whe n there are no new messages. If you call your phone from ou[...]

Answering System Features 69 Message alert Y ou can select whether or not the message indicator on the handset will flash when new messages have been recorded (page 62). 1 Press { MENU } (centre of joystick). 2 Scroll to J , then press { SELECT } . 3 Scroll to “ Message alert ”, then press { SELECT } . 4 Push the joystick up or down repeatedly [...]

Useful Information 70 W all mounting The base unit can be mounted on a wall. 1 Connect the AC adaptor. 2 Tuck the telephone line cord in side the wall mounting adaptor ( 1 ). Connect the telephone line cord ( 2 ). 3 Insert the hooks on the wall m ountin g adaptor into the holes ( A ) an d ( B ) on the base unit. To power outlet Fasten the AC adapto[...]

Useful Information 71 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Drive the screws (not included) into the w all using the wall mount template (see below). Connect the telephone line cord. Mount the uni t, then slide it down. L Raise the antennas. Screws 83 mm To telephone plu[...]

Useful Information 72 T o remove the wall mo unting adaptor While pushing down the re lease levers ( 1 ), remove the adaptor ( 2 ). TG5871AL.book Page 72 Friday, J une 17, 2005 7:01 PM[...]

Useful Information 73 Belt clip Y ou can hang the handset on your belt or pocket using the included belt clip. T o atta ch the belt clip T o remove the belt clip While pressing the top of the clip ( 1 ), pull the right edge in the direction of the arrow ( 2 ). Headset (optional) Connecting an optional head set to the handset allows hands-free phone[...]

Useful Information 74 Error messages If the unit detects a problem, one of the following messages will be displayed on the handset. Display message Cause & solution Busy L The called handset or base unit is in use. L Privacy mode is on for the call you tried to join (page 22). L The handset you tried to copy phonebook items to is in use. L The [...]

Useful Information 75 ---Incomplete--- Tom Jones 0555654321 Phonebook full (The name/number is an example.) L When phonebook items we re s ent to another handse t, the handset’s phonebook memory was full and copying stopped. Press { OFF } to exit. Erase items from another handset’s phonebook (page 28). When p honebook memory is available, you c[...]

Useful Information 76 T roubleshooting General u se Programmable settings Problem Cause & solution The unit does not work. L Make sure that the battery is installed correctly (page 12). L Check the connections (page 1 1). L Fully charge the battery (page 13). L Clean the charge contacts and charge again (page 13). L Unplug the base unit’s AC [...]

Useful Information 77 Making/a nswering ca lls, Interco m While programming, the handset starts to ring. L A call is being received. Answer the call and start again from the beginning after hanging up. I cannot record, download, or erase songs, and “ Recharge battery ” is displayed. I cannot download or erase pictures, and “ Recharge battery [...]

Useful Information 78 Phonebook I cannot have a conversation using the headset. L Make sure that an optional headset is connected properly (page 73). L If “ SP-phone ” is displayed on the handset, press {C} to switch to the headset. L Use only the Panasonic KX-TCA88AL headset. I cannot page the handset or base unit. L The called handset is too [...]

Useful Information 79 Caller ID Problem Cause & solution The handset do es not display the caller’ s phone number. L Y ou have not subscribed to Calle r ID service. Contact your telephone company to subscribe. L If your unit is connected to any additional telephone equipment suc h as a Caller ID box or wireless telephone jack, disconne ct the[...]

Useful Information 80 Answering system Problem Cause & solution I cannot listen to messages from a remote location. L A touch tone phone is required for remote operation. L Press the remote code corre ctly and press each key firmly (page 65). L The answering system is of f. T urn it on (page 66). E flashes and the ANSWER ON indicator flashes ra[...]

Useful Information 81 Battery recharge Power failure Problem Cause & solution “ Recharge battery ” is displayed, 3 flashes o r the handset beeps intermittently. L Fully charge the battery (page 13). “ Charge for 6 HRS ” and 4 are displayed and the handset does no t work. L The battery has been disc harged. Ful ly charge the battery (pag[...]

Useful Information 82 Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been auth orised to be connected to your telephone service. Conditions relating to connectio n and oper ation of this Permit ted Attachment are contained in T elecommun[...]

Useful Information 83 If you are satisfied with the operation of your tel ephone service after plugging in your Permitted Attachment, your installation is completed. Y ou will be unable to connect this Permitted Attachment if your telephone service con sists only of a wall phone or an old style tel ephone which is not connected by means of a modern[...]

Useful Information 84 S pecifications Base unit Operating environ ment: 5 °C – 40 °C Frequency: 5.76 GHz – 5.84 GHz Dimensions: Approx. height 96 mm x width 210 mm x depth 157 mm Mass (Weight): Approx. 405 g Power consumpt ion: S tandby: Approx. 2.6 W Maximum: Approx. 5.5 W Power supply: AC adaptor (230–240 V AC, 50/60 Hz) Handset Operating[...]

Index 85 Index A Accessories: 5 Accessory handset: 7 Answering calls Base unit: 25 Handset: 24 Answering system: 60 Appearance: 55 Area code: 55 Audio cable: 50 Auto talk: 24 , 56 B Backlit display: 18 Backlit handset keypad: 18 Base unit location: 10 Battery Charge: 13 Installation: 12 Performance: 13 Replacement: 14 S trength: 13 Belt clip: 73 Bo[...]

Index 86 N Noise: 10 P Pause: 22 , 31 Phonebook Adding: 26 Calling: 27 Copying: 29 , 30 Editing: 28 Erasing: 28 Names: 27 Option: 34 Picture ID: 34 Power failure: 11 , 81 Privacy feature: 22 R RECALL button: 22 , 24 Recall time: 56 Recording time: 68 Redial: 20 , 23 Redial list: 21 Registration: 59 Remote code: 67 Remote operation: 65 Ring colour: [...]

87 Notes TG5871AL.book Page 87 Friday, J une 17, 2005 7:01 PM[...]

Copyright: This material is copyrigh ted by Panasonic Commu nications Co., Ltd., and may be reproduced for internal u se only . Al l other reproduction, in w hole or in part, is prohib ited without the written cons ent of Panasonic C ommunications Co., Ltd. © 2005 Panasonic Communicati ons Co., Ltd. All Rights Reserved. Sales Department: Panasonic[...]