Panasonic SC-AK220 manuale d’uso

RQT7528-P CD Stereo System Operating Instructions Model No. SC-AK220 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. As an E NERGY S TAR ® Partner, Panasonic has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency. [...]

Before using RQT7528 2 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following system. System SC-AK220 Main unit SA-AK220 Speakers SB-AK220 CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET[...]

Before using RQT7528 3 Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructio[...]

RQT7528 4 4 A C power suppl y cord Note The included AC po wer supply cord is for use with this unit only . Do not use it with other equipment. For your ref erence Information you enter into the unit’ s memory , except f or time, remains intact for up to a w eek after the AC power supply cord is disconnected. 2 AM loop antenna Stand the antenna u[...]

Before using RQT7528 5 1 AC supply indicator [AC IN] This indicator lights when the unit is connected to the AC power supply. 2 Standby/on switch [ f f f f f /I, POWER] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 3 Display 4 Deck 1 cassette holder ............[...]

RQT7528 6 Disc inf ormation Disc type Logo Indication used in instructions Audio CD CD CD-R/RW – CD MP3 (Depending on the recording format A see above) Do not: • use irregularly shaped CDs. • attach extra labels and stickers. • use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. • [...]

RQT7528 7 1 Press [ c , OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.) To continue loading CDs in the other trays Press [1]–[5] to select the required tray and press [ c , OPEN/ CLOSE] to open the tray. Press [ c , OPEN/CLOSE] to close the tray. 3 Press [1]–[5] to play your desired disc. (Alte[...]

RQT7528 8 CDs To listen to specific CDs and CD MP3 tracks (CD Play Mode function) a ALL-DISC: Pl ays all loaded discs in succession from the selected disc to the final disc . b 1-SONG: Pla ys one selected track on the selected disc. c 1-ALBUM: MP3 Plays one selected album on the selected disc. d 1-RANDOM: CD Plays one selected disc in random order [...]

RQT7528 9 To recall a marked track number in the current disc During play or stop Press [MARKER] to recall a marker. Play starts from the track recalled. Note • “NO MARKER” indicates that the marker in the current disc is empty. • The marker memory is cleared when you open the CD tray. • For CD-DA, you cannot use this function during 1-RA[...]

RQT7528 10 Remote control only There are two methods of pre-setting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. Preparation: Press [TUNER, BAND] to select “FM[...]

RQT7528 11 You can use either deck 1 or deck 2 for tape playback. Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. 1 Press [ : , TAPE]. The unit comes on. If a cassette was loaded, play starts automatically (One touch play). 2 Pre[...]

RQT7528 12 Using an external unit (See page 4 for external unit connection.) 1. Press [AUX]. The unit comes on. 2. For listening: Proceed to step 3. For recording: Press [ a , REC] (recording starts). 3. Start playback from the external source. (For details, refer to the external unit ’ s instruction manual.) Using headphones (not included) Reduc[...]

Timer operations RQT7528 Reference 13 To check the settings Press [SHIFT] + [CLOCK/TIMER] while the unit is on to select “ r PLAY” or “ r REC”. The settings are shown in the following order: Play timer: on time → off time → source → volume Record timer: on time → off time → source To check the settings while the unit is off, press[...]

RQT7528 14 CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (1 7 / 8 ips) Overall frequency response (+3 dB, –6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz–14 kHz S/N[...]

Timer operations RQT7528 Reference 15 T r oubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on the back cover if you reside in the U.S.A., or refer to the “P[...]

16 RQT6351 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 0[...]