Panasonic TH60PF50U manuale d’uso

TH-60PF50U TH-65PF50U Model No. Operating Instructions Display Operations High De fi nition Plasma Display English Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference.[...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within[...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8) Do not install near any heat sou[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r eference. Retain your pur chase r ec[...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) CAUTION Clean the power cable regularly to prevent it [...]

7 Safety Precautions W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times[...]

8 Safety Precautions W ARNING Small Parts 3D Eyewear contains small parts (battery and specialized band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear . CAUTION T o enjoy 3D images safely and comfortably , please read these instructions fully . Use for co[...]

9 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. Please[...]

+ - + - Ferrite core × 2 Use the Ferrite cores to comply with the EMC standard. (refer to “Operating Instructions, Network Operations”) Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity (+ and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remot[...]

1 2 11 1 2 Speakers (Optional accessories) Red Black While pressing the lever , insert the core wire. Red Black Return the lever . Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’s Installation Manual for details on speaker installation. AC cord connection and fi xing, cable ?[...]

12 (8Ω,20W[10W+10W ]) AUDIO OUT R L VIDEO OUT AUDIO OUT R L , Y , P B , P R OUT P R P B Y (8Ω,20W[10W+10W ]) VIDEO and COMPONENT / RGB IN connection Notes: • Change the “COMPONENT/RGB-IN select” setting in the “SETUP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 51) • [...]

13 (8Ω,20W[10W+10W ]) (8Ω,20W[10W+10W]) HDMI A V OUT HDMI connection DVI-D IN connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S Data2+ 11 T .M.D.S Clock Shield 2 T .M.D.S Data2 Shield 12 T .M.D.S Clock- 3 T [...]

(8Ω,20W[10W+10W]) Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Stereo mini plug (M3) Audio Connect a cable which matches the audio output terminal on the computer . (Male) (Female) COMPUTER 14 PC Input T erminals connection Notes: • With regard to the typical PC input signals that are described in the applicable input signals li[...]

(8Ω,20W[10W+10W ]) 6 7 8 9 1 3 4 52 COMPUTER RS-232C Straight cable D-sub 9p (Male) (Female) 15 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this[...]

INPUT MENU ENTER/ + / VOL - / 16 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Plasma Display . Connecting the plug to the W all Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst. Press the Power switch on the Plasma Display to turn [...]

English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD LANGUAGE SET SELECT DA Y/TIME SETUP TIME MON 99:99 SET TIME 99:99 DA Y MON When 3D images will be viewed by unspeci fi ed number of people or used for commercial applications, someone in authority should convey the following precautions. These precautions should be fo[...]

INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL - / 18 Selecting the input signal Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Outputs the sound as set in “Audio input select” in the Options menu.(see page 60) • Select to match the signals from the source connected to the component/RGB input term[...]

INPUT MENU ENTER/ + / VOL - / 19 MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 25) INPUT button (Input signal selection) (see page 18) Basic Controls Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume[...]

20 Basic Controls Remote Control T ransmitter RECALL button Press the “RECALL” button to display the current system status. 1 Input label 2 Aspect mode (see page 21) During 3D images (see page 37) Audio input (see page 60) Pro fi le name (see page 33) NANODRIFT SA VER operating (see page 41) 3 Off timer The off timer indicator is displayed onl[...]

INPUT MENU ENTER/ + / VOL - / 21 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 64). The aspect mode changes each time t[...]

INPUT MENU ENTER/ + / VOL - / 2 EXIT 2 1 EXIT s 1 s 2 s 3 s 4 22 VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. [...]

23 V iewing 3D images Y ou can enjoy viewing 3D images with contents or programmes compatible with 3D effect by using the 3D eyewear (optional). Note: Y ou need the 3D IR TRANSMITTER (optional) and the 3D eyewear (optional) to view the 3D images on this display . For further information, see the instruction manuals of the 3D IR TRANSMITTER and the [...]

24 T roubleshooting for 3D Eyewear T able of images that can be seen for each 3D Picture Format and the source image format Symptoms Checks Cannot see 3D images • Has the 3D Eyewear been switched On? • Ensure that “3D FUNCTION” in “3D SETTINGS” is set to “ON”. (see page 37) • Some 3D image signals may not be automatically recogniz[...]

1/2 3D SETTINGS SIGNAL EXTENDED LIFE SETTINGS ECO MODE SETTINGS INPUT LABEL FUNCTION BUTTON SETTINGS SETUP NO ACTIVITY POWER OFF DISABLE MENU DISPLA Y DURA TION 30 S OSD BRIGHTNESS 5 OSD LANGUAGE ENGLISH ( US ) SCREENSA VER COMPONENT/RGB-IN SELECT RGB 2/2 SETUP MUL TI DISPLA Y SETUP ON/OFF TIMER SETUP NETWORK SETUP DA Y/TIME SETUP DISPLA Y ORIENT A[...]

0 0 NORMAL NORMALIZE AUTO SETUP POS./SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLAMP POSITION CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 26 Adjusting POS./SIZE 1 Press to display the POS./SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to exit from adjust mode. Notes: • Adjustment details are memorized separately for[...]

27 H-POS Adjust the horizontal position. V -POS Adjust the vertical position. H-SIZE Adjust the horizontal size. V -SIZE Adjust the vertical size. DOT CLOCK (During Component/PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. CLOC[...]

28 While the POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS./SIZE 1:1 PIXEL MODE Adjusts the display size when 1 125i, [...]

BLACK EXTENSION GAMMA INPUT LEVEL ADV ANCED SETTINGS NORMAL NORMALIZE W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B 0 0 2.2 0 0 0 0 0 0 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT ADV ANCED SETTINGS COLOR TEMP NORMAL 29 PICTURE Adjustments 1 ADV ANCED SETTINGS Enables fi ne pi[...]

30 PICTURE Adjustments ADV ANCED SETTINGS Notes: • Y ou can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The setting details for ST ANDARD, DYNAMIC, CINEMA and MONITOR respectively are memorized separately for each input terminal. • In PICTURE, there is not a noticeable change even [...]

18 0 0 0 3 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT ADV ANCED SETTINGS MEMORY SA VE COLOR TEMP NORMAL MEMORY LOAD MEMORY EDIT 25 0 0 0 5 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT ADV ANCED SETTINGS COLOR TEMP NORMAL 25 0 0 0 5 PICTURE NORMAL NORMALIZE CINEMA BRIG[...]

32 Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be saved. Picture Pro fi les Saving pro fi les 1 Specify the picture quality in the PICTURE menu and ADV ANCED SETTINGS. (see page 29, 30) 2 In the PICTURE menu, select “MEMORY SA VE”. [...]

33 Picture Pro fi les Load pro fi les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro fi les are stored in memory according to the selected input interface. (see page 18) • When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be loaded. 1 In the PICTURE menu, select “MEMORY[...]

0 0 0 1/2 SOUND NORMAL NORMALIZE ST ANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND 34 SOUND Adjustment 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2 Select to adjust each item. While the “SOUND” menu is displayed, if either t[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS ECO MODE SETTINGS INPUT LABEL FUNCTION BUTTON SETTINGS SETUP NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER 3D SETTINGS MENU DISPLA Y DURA TION 30 S OSD BRIGHTNESS 5 1/2 SIGNAL EXTENDED LIFE SETTINGS ECO MODE SETTINGS INPUT LABEL FUNCTION BUTTON SETTINGS SETUP NO [...]

99:99 MON DA Y/TIME SETUP TIME MON 99:99 SET TIME DA Y 2/2 SETUP MUL TI DISPLA Y SETUP PORTRAIT SETUP ON/OFF TIMER SETUP NETWORK SETUP DA Y/TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE 36 DA Y/TIME SETUP / ON/OFF TIMER SETUP DA Y/TIME SETUP The timer can switch the Plasma Display ON or OFF . Before attempting T imer Set, con fi rm the TIME and adju[...]

37 3D SETTINGS T o view the 3D images, please adjust and setup the 3D settings. Note: Set these settings for each input terminals. Select “3D SETTINGS” in “SETUP” menu and press button. 3D SETTINGS ON 3D FUNCTION NORMAL 3D INPUT FORMA T LEFT/RIGHT SW AP SAFETY PRECAUTIONS AUTO • 3D FUNCTION ON OFF ON: T o view the 3D images, please set it[...]

SCREENSA VER ST ART FUNCTION SCROLLING BAR ONL Y TIME 99:99 MODE OFF 38 Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSA VER should be used. FUNCTION selection 2 1 3 Select “SCREENSA VER” in “SETUP” menu and press button. Press to select the FUNCTION. Press to select t[...]

SCREENSA VER ST ART FUNCTION MODE FINISH TIME ST ART TIME SCROLLING BAR ONL Y TIME OF DA Y 6:15 12:30 TIME 15:00 SCREENSA VER ST ART FUNCTION MODE SA VER DURA TION SHOW DURA TION SCROLLING BAR ONL Y INTERV AL 12:00 3:00 TIME 15:00 SCREENSA VER ST ART FUNCTION MODE SCREENSA VER DURA TION SCROLLING BAR ONL Y ST ANDBY AFTER SCR SA VER 6:15 TIME 15:00 [...]

EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNAMIC SIDE BAR ADJUST NANODRIFT SA VER LOCK SETTINGS PEAK LIMIT BRIGHT HIGH MID UNLOCK APPL Y T O CURRENT INPUT APPL Y TO ALL INPUTS OFF 30 RECOMMENDED SETTINGS 40 EXTENDED LIFE SETTINGS SIDE BAR ADJUST Do not display a picture in 4:3 mode fo[...]

41 Reduces screen image retention EXPRESS SETTINGS Set the “Image Retention Reduction” menu to the recommended settings. All menus will be locked. PICTURE MENU: ST ANDARD PICTURE: Recommended setting for each model SIDE BAR ADJUST : BRIGHT NANODRIFT SA VER: HIGH MID PEAK LIMIT : ON 1 Select “EXPRESS SETTINGS”. EXPRESS SETTINGS CUSTOM SETTIN[...]

42 Reduces screen image retention CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. 1 Select “CUSTOM SETTINGS”. EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS 1 select 2 access 2 T o set each menu to the recommended setting: Select “RECOMMENDED SETTINGS”. PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNA[...]

ECO MODE CUSTOM: The menu of power consumption reduction is individually set. ON: The following fi xed values are set to the menu of power consumption reduction. Individual setting is not available. POWER SA VE: SENSOR ST ANDBY SA VE: ON PC POWER MANAGEMENT : ON Using Remote Control When is pressed, the “ECO MODE” setting changes. ECO MODE ON [...]

44 SLOT INPUT VIDEO INPUT LABEL COMPONENT HDMI DVI PC NETWORK SLOT INPUT VIDEO COMPONENT HDMI DVI PC NETWORK Customizing the Input labels This function can change the label of the Input signal to be displayed. (see page 18) Select “INPUT LABEL” in “SETUP” menu and press button. Image input Input label [SLOT INPUT]*1 SLOT INPUT / DVD1 / DVD2[...]

ECO MODE SETTINGS OFF POWER SA VE ON ST ANDBY SA VE DVI-D POWER MANAGEMENT OFF PC POWER MANAGEMENT OFF CUSTOM ECO MODE NO SIGNAL POWER OFF DISABLE Menu is displayed. (Example: ECO MODE SETTINGS) Pressing the FUNCTION button clears the menu. T o exit this mode, press any button. 45 FUNCTION BUTT ON SETTINGS Set the functions that operates when is pr[...]

46 DISABLE ENABLE NO ACTIVITY POWER OFF MENU DISPLA Y DURA TION / OSD BRIGHTNESS OSD LANGUAGE When this function is set to “ENABLE”, the power is turned off (standby) automatically when there is no operation of the Plasma Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed. When the power is tu[...]

× 2 MUL TI DISPLA Y SETUP HORIZONT AL SCALE OFF A1 OFF VIDEO W ALL UNIFORMITY VERTICAL SCALE LOCA TION OFF SEAM HIDES VIDEO × 2 MUL TI DISPLA Y SETUP 47 By lining up Plasma Displays in groups, for example, as illustrated below , an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set [...]

48 Y ou can set the remote control ID when you want to use this remote control on one of several different displays. Note: T o operate this function, please purchase ID remote controller sold separately . Object model : EUR7636070R SETUP for MUL TI DISPLA Y 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , [...]

49 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically . The image will be enlarged 3 times and rotated 90-degree. SETUP for PORTRAIT (Example) Press to select the PORTRAIT SETUP . Press to select “ON” or “OFF”. Note: If you set PORTRAIT SETUP to ON, MUL TI DISPLA Y SETUP will be unavailab[...]

50 SETUP for PORTRAIT Press to select VIEWING AREA or LOCA TION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF , 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING A[...]

51 SETUP for Input Signals COMPONENT / RGB IN SELECT COMPONENT RGB Select to match the signals from the source connected to the Component / RGB or PC input terminals. Y, P B , P R signals “COMPONENT” RGB signals “RGB” Note: Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN). YUV / RGB IN SELECT YUV RGB Select to match t[...]

3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] NOISE REDUCTION OFF 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFF H-FREQ. V- F R E Q . kHz Hz 63.98 60.02 DOT CLOCK FREQ. MHz 108.0 SIGNAL FORMA T 1280×1024/60i SIGNAL [ COMPONENT ] XGA MODE AUTO NOISE REDUCTION OFF H-FREQ. V- F R E Q . kHz Hz 63.98 60.02 SI[...]

SETUP for Input Signals • SYNC This function operates only during input from PC IN terminal. Setting RGB sync signal Con fi rm that the input is set to RGB input (this setting is valid only for RGB input signal). AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. ON G: Uses a [...]

ADV ANCED NR [ VIDEO ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ Digital ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ COMPONENT ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ RGB ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF () NOISE REDUCTION OFF () NOISE REDUCTION ADV ANCED H-FREQ. V- F R E Q . kHz Hz 63.98 [...]

Options Weekly Command T imer Audio input select 1/3 Input Search T ouch Panel settings Initial input Onscreen display On Off Off Off 0 0 Maximum VOL level Initial VOL level Off Input lock Off Button lock Off Remocon User level Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off S[...]

56 Item Adjustments Input lock Locks the input switch operation. Off SLOT INPUT* 1 VIDEO COMPONENT* 2 HDMI DVI PC NETWORK *1 “SLOT INPUT” is displayed when an optional T erminal Board is installed. When a T erminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed. *2 “COMPONENT” may be di[...]

57 Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the color temperature for TV studio. Note: V alid only when the “W ARM” is set as “COLOR TEMP” in PICTURE menu. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”. On: Enables “Stud[...]

58 Options Adjustments W eekly Command Timer Y ou can set 7-day timer programming by setting time and command. Note: Before setting Weekly Command Timer , set DA Y/TIME SETUP . (see page 36) Press to select Function. Press to select “On”. Note: • When Function is set to On, ON/OFF TIMER SETUP (see page 36) is unavailable and INTERV AL / TIME [...]

Weekly Command T imer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command T imer Command 02 Command No IMS:SL1 10:30 Time 1 Program 59 Options Adjustments Press to select Command No. Press to select a command number . 6 Press to select T ime / Command. Press to set each item. T ime: Set the time to execute a command program. Pressing [...]

60 Set up the sound when an image input is selected. Image input Audio input [SLOT INPUT]*1 SLOT INPUT / VIDEO/COMPONENT / DVI/PC / NETWORK / NO AUDIO [VIDEO] SLOT INPUT / VIDEO/COMPONENT / DVI/PC / NETWORK / NO AUDIO [COMPONENT]*2 SLOT INPUT / VIDEO/COMPONENT / DVI/PC / NETWORK / NO AUDIO [HDMI] SLOT INPUT / VIDEO/COMPONENT / HDMI / DVI/PC / NETWO[...]

61 Press ACTION ( ) button Options Audio input select T ouch Panel settings 1/3 Weekly Command T imer T ouch Panel mode Calibration mode T ouch Panel settings On T ouch Panel mode Calibration mode T ouch Panel settings On The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds. After 180 seconds or when you have the menu [...]

Input Search Primary Input Off Secondary Input Input Search SEARCHING 62 Press ACTION ( ) button Options Audio input select T ouch Panel settings Input Search 1/3 Weekly Command T imer Input Search Off: When there is no signal, the input is not switched automatically . All Inputs: Searches all inputs and switches to an input with a signal. Input se[...]

63 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) Check if s[...]

64 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 FULL The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

65 Applicable Input Signals * Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) HDMI 1 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) * 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) * 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 62[...]

66 Applicable Input Signals 1/2 SIGNAL EXTENDED LIFE SETTINGS ECO MODE SETTINGS INPUT LABEL FUNCTION BUTTON SETTINGS SETUP NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSA VER 3D SETTINGS MENU DISPLA Y DURA TION 30 S OSD BRIGHTNESS 5 This function allows you to reset the unit to the factory setting. Shi[...]

67 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR Audio Menu (CLEAR) 2 AAC:MENDYN Audio Menu (DYNAMIC) 3 AAC:MENSTD Audio Menu (ST ANDARD) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 −− 9 −− 10 A VL:00 Audio V olume (00) 1 1 A VL:10 Audio V olum[...]

68 Speci fi cations TH-60PF50U TH-65PF50U Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Rated Power Consumption 515 W 555 W Stand-by condition 0.4 W 0.4 W Power off condition 0.2 W 0.2 W Plasma Display panel Drive method : AC type 60-inch, 16:9 aspect ratio Drive method : AC type 65-inch, 16:9 aspect ratio Screen size 52.3” (1,330 mm)[...]

Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America Executive Of fi ce : Three Panasonic W ay 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y o[...]