Panasonic WR-XS3P manuale d’uso

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Model No. WR-XS3 Audio Mixer Operating Instructions[...]

2 The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WR-XS3 Serial No. Caution: Before attempting to connect or operate this product, please [...]

3 Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklara- tion omhandler, er i overensstemmelse med sta[...]

4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat regi[...]

5 CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................4 PREFACE ............................................................................6 FEATURES .........................................................................6 PRECAUTIONS ...................................................................7 MAJOR OPERATING CONTROLS AND[...]

6 This audio mixer has four mono input lines, four stereo input lines, one mono/stereo input line and three output lines. FEA TURES ● Three modes applicable to different amplification systems DIP switches at the rear panel support the following amplification systems: • Mode 1: One-circuit amplification (stereo: 1 and mono: 1) • Mode 2: Two-ci[...]

7 PRECAUTIONS • Refer all work related to installation of this product to qualified service personnel or system installers. • Turning On the Power Turn on the unit before the amplifier is turned on. • Turning Off the Power Turn off the amplifier first, and then turn off the unit. • Connection Switch off the amplifier, the unit and any other[...]

8 MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS ■ Front V iew q Power switch [POWER] Toggles the power on and off. w Power indicator Lights up when the power switch is set to ON. e Mono input level knobs [MONO 1 to 4] Monaural input levels are adjustable with these knobs corresponding widely to the connected devices, e.g., from microphones up to [...]

9 !0 Input peak indicator [INPUT PEAK] Lights up when any input signal reaches –3 dB (from the MONO INPUT 1 to 4 connectors, the STEREO INPUT 1 to 4 jacks , the MULTI INPUT ST connectors, the MULTI INPUT MONO connector and the LINE IN jack) above the clip level. !1 Output level knobs [STEREO OUT] Turning to the left will lower the stereo output l[...]

10 Input level: –10 dBV Impedance: 10 k Ω o Multiple mono input connector [ MULTI INPUT MONO ] Connects a microphone. When using this connector, remove the short pin. Mono: 1 circuit Input connector: XLR-3-31 type balanced Input level: –45 dB Impedance: 10 k Ω !0 Stereo input jacks [STEREO INPUT L/R 1 - 4] These XRL connectors receive input[...]

11 System Configuration Decide what kind of system to form. Determine the num- ber of the external devices, the connection form, and the mode (p. 14 Unit Modes and Signal Flow). d Connections Connect the components to the unit. d Settings Configure the following settings: • Modes (pp. 14 to 17) • Input line assignment (if using the SUB OUT jack[...]

12 Secure the unit by 4 pieces of rack mounting screws (M5 x 12) in the accessories. Where to install How to install 1. Install the unit on a rack. Apply the screws in the accessories. Note: Attach the four rubber feet if not installing the unit in a rack. Cautions: • When mounting this unit in a place where it is frequently subject to vibrations[...]

13 ■ Cable Information The usable cable types, plugs, and connectors are the following. Before connection, sure you are using the proper cables. Screw (x3) Spring washer 2 3 1 (COLD) (HO T) (GND) HOT GND HOT(Tip) COLD(Ring) GND(Sleeve) GND H (HOT) C (COLD) 3 2 1 HOT HOT GND ● Pin plug ● T ip-ring-sleeve (TRS) phone plug ● XLR connector (XLR[...]

14 After connecting the external devices, do the following procedures: • Mode setting • Input signal assignment to the SUB OUTPUT jack • Output signal assignment to the LINE IN jack, MULTI INPUT ST jacks, or MULTI INPUT MONO connector. ■ Unit Modes and Signal Flow This unit has three modes. Set the suitable mode with DIP switch for the desi[...]

15 Mono amplification The signals from stereo or mono inputs are mixed and output through the MONO OUTPUT jack toward one zone. Signal Flow To adjust the output levels Mono and stereo outputs are individually adjustable. In the case shown in the figure, the volume of microphones is adjusted with the MONO OUT knob and that of stereo source devices i[...]

16 ● Mode 2 The stereo input signals are output through the STEREO OUTPUT jack, and mono input signals are output through MONO OUTPUT jack. BGM is output from the main speakers with stereo amplification, and microphone sounds are output from the ceiling speakers with monaural amplification. Signal Flow To adjust the output levels Mono and stereo [...]

17 ● Mode 3 The signals from stereo or mono input lines are separately output through the STEREO OUTPUT, MONO OUTPUT and SUB OUTPUT jack. For example, this connection is used for zone amplification in a shop. • The signals from the MONO INPUT 1 and 2 connectors are output through the STEREO OUTPUT and MONO OUTPUT jacks. (Input for all-call broa[...]

18 ■ Input Line Setting for SUB OUTPUT The SUB OUTPUT jack at the rear panel can output any signal from the STEREO INPUT 1 to 4 jacks or MONO INPUT 1 to 4 connectors. The output setting is determined with the DIP switch setting. The input signal from the LINE IN jack, MULTI INPUT ST jacks or MULTI INPUT MONO is also assignable to the SUB OUTPUT j[...]

19 ■ Output Line Setting for MUL TI IN/LINE IN The signal from the MULTI IN ST jacks and MULTI IN MONO connector at the rear panel can be output through any of the STEREO OUT, MONO OUT and SUB OUTPUT jacks The output connector is assigned with the assign switches at the front panel. The LINE IN jack at the front panel is also usable as a multiple[...]

20 When using the MUL TI INPUT ST jacks (or MONO connector) and LINE IN jack at the same time In this case, the signal from the MULTI INPUT ST jacks will not be output. The signal is mixed inside the unit and output through the assigned output connector. Notes: • Do not use the MULTI INPUT ST jacks and MULTI INPUT MONO connector at the same time.[...]

21 ■ Example 1: Home Party (Mode 1) •S et the DIP switches to Mode 1. (Refer to p. 15.). • Mic 1 to 4 (MONO IN 1 to 4), Key (ST IN 1), Bass AMP (ST IN 2) and DVD/CD/MD (ST IN 3 and 4) are mixed to be output to the main speakers (ST OUT L/R). • The power amplifier adjusts the output level of sound sources you want to confirm. These are then [...]

22 ■ Example 2: Presentation Room (Mode 2) MONO IN 1 REC OUT MONO IN 2 MONO IN 3 to 4 ST IN 1 to 4 LINE IN SUB OUT MONO OUT ST OUT L ST OUT R ON OFF 4 28 10 0 1 6 4 28 10 0 2 6 4 28 10 0 3 6 4 28 10 0 4 6 MONO POWER 4 28 10 0 1 6 4 28 10 0 2 6 4 28 10 0 3 6 4 28 10 0 4 6 4 4 2 2 8 8 10 0 10 0 6 6 ST MULTI IN 4 28 10 0 6 SUB OUT STEREO MONO STEREO[...]

23 ■ Example 3: Shop (Mode 3) ST OUT L MONO IN 1 MONO IN 2 MONO IN 3 MONO IN 4 MULTI IN ST MONO OUT SUB OUT ST IN 1 to 4 ON OFF 4 28 10 0 1 6 4 28 10 0 2 6 4 28 10 0 3 6 4 28 10 0 4 6 MONO POWER 4 28 10 0 1 6 4 28 10 0 2 6 4 28 10 0 3 6 4 28 10 0 4 6 4 4 2 2 8 8 10 0 10 0 6 6 ST MULTI IN 4 28 10 0 6 SUB OUT STEREO MONO STEREO OUT INPUT REAK LINE [...]

24 When you connect a cassette tape recorder or MD recorder to record the broadcasting, confirm the following: ■ Notice about Recorder Connections Howling can occur depending on the connection form or connected devices. Connect the recording devices either of the fol- lowing ways: ● When Using a Recording-only and a Playback-only Decks The unit[...]

25 ■ Recording and Playback with One Deck To record and play back a broadcast with one deck, connect the SUB OUTPUT jack to cut the feedback. Then set the DIP switch associated with the MULTI INPUT ST jacks to OFF. Note: Use the cable shown in the figure to connect the unit SUB OUT and the deck's REC OUT. To output either mono or stereo sign[...]

26 STICKING LABELS After the connection and settings, stick the supplied labels on the front panel of the unit. The labels indicate the following: • Name and level setting of each knob • Mode setting • Input line assigned to the SUB OUTPUT jack ■ Label ■ Where to Stick Labels Stick the corresponding label in the corresponding position as [...]

27 ■ Indication of Input Line Assigned to SUB OUT Draw a line between SUB OUT and the assigned input connector, or black out the square. The assigned input line will be identifiable. Draw a line or black out to identify the assigned input line. SUB OUT MONO 1234 123 STEREO 4[...]

28 AT T ACHING/DET ACHING THE ACR YLIC COVER The input levels need to be adjusted before using the unit. After the adjustments, attaching the supplied acrylic cover with mounting spacers and screws can prevent the wrong operation of input levels. The acrylic cover protects the different range of input level controls depending on the direction in wh[...]

29 ■ Basic Operation This section describes basic operation. All setup items and connections must be completed in advance. The switches located under the acrylic cover normally do not need to be accessed for operation. Access is required only to the switches outside the acrylic cover. Confirm that the connections of all the devices and all set mo[...]

30 ■ Input Level Adjustment This section describes how to adjust input levels. The figure describes an example. • Mode 1 • The microphone is connected to the MONO INPUT 1 connector and the CD player is connected to the STEREO INPUT 1 jack. • The input signal of the MONO INPUT 1 connector and the STEREO INPUT 1 jack are mixed inside the unit[...]

31 ■ Using CD/MD Player through LINE IN This section describes amplification when a CD player or MD player, etc. is connected to the LINE IN jack at the front panel. 1. Set the LINE IN jack's output level knob to 0. 2. Connect the CD/MD player etc. to the LINE IN jack. 3. Press the ST, MONO or SUB button to assign an output line to the LINE [...]

32 BLOCK DIAGRAM HPF SENS SENS MONO 1 MUL TI IN MONO MUL TI IN ST LINE IN (FRONT P ANEL) HPF MONO 2 HPF MONO 3 HPF MONO 4 ST 1 MUTE SENSE REAR P ANEL SW ST 2 ST 3 ST 4 SUB IN Mute STEREO MONO SUB Assign SW (FRONT P ANEL) L STEREO MONO SUB R ST/MONO Inner SW L R REC OUT STEREO OUT MONO OUT SUB OUT PEAK LED MONO 1 about MODE MODE SELECT A MODE SELECT[...]

33 HPF SENS SENS MONO 1 MUL TI IN MONO MUL TI IN ST LINE IN (FRONT P ANEL) HPF MONO 2 HPF MONO 3 HPF MONO 4 ST 1 MUTE SENSE REAR P ANEL SW ST 2 ST 3 ST 4 SUB IN Mute STEREO MONO SUB Assign SW (FRONT P ANEL) L STEREO MONO SUB R ST/MONO Inner SW L R REC OUT STEREO OUT MONO OUT SUB OUT PEAK LED MONO 1 about MODE MODE SELECT A MODE SELECT B MODE 1 ON O[...]

34 ■ MODE 2 HPF SENS SENS MONO 1 MUL TI IN MONO MUL TI IN ST LINE IN (FRONT P ANEL) HPF MONO 2 HPF MONO 3 HPF MONO 4 ST 1 MUTE SENSE REAR P ANEL SW ST 2 ST 3 ST 4 SUB IN Mute STEREO MONO SUB Assign SW (FRONT P ANEL) L STEREO MONO SUB R ST/MONO Inner SW L R REC OUT STEREO OUT MONO OUT SUB OUT PEAK LED MONO 1 about MODE MODE SELECT A MODE SELECT B [...]

35 ■ MODE 3 HPF SENS SENS MONO 1 MUL TI IN MONO MUL TI IN ST LINE IN (FRONT P ANEL) HPF MONO 2 HPF MONO 3 HPF MONO 4 ST 1 MUTE SENSE REAR P ANEL SW ST 2 ST 3 ST 4 SUB IN Mute STEREO MONO SUB Assign SW (FRONT P ANEL) L STEREO MONO SUB R ST/MONO Inner SW L R REC OUT STEREO OUT MONO OUT SUB OUT PEAK LED MONO 1 about MODE MODE SELECT A MODE SELECT B [...]

36 LEVEL DIAGRAM +30 +20 +10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90 –100 –1 10 –120 –130 (dBu) +30 +20 +10 –10 –20 –30 –40 –50 –60 –70 –80 –90 –100 –1 10 –120 –130 (dBu) ST "10" MONO "2" MONO "10" MONO "2" ST "10" MONO "10" MUL TI IN (MONO[...]

37 Trouble Check item Remedy Power does not turn on. No sound is heard from the speakers connected to SUB OUTPUT. The power cord insulation is damaged. The power cord, plug and connectors get hot during the use. Is the power cord connected between the inlet socket of this unit and AC receptacle? Is the DIP switch of the assigned input line set to O[...]

38 ● Basic Specifications Power supply 120 V AC, 60 Hz or 220 V to 240 V AC, 50 Hz* Power consumption 10 W Temperature range 0 °C - +45 °C (32 °F - 113 °F) Dimensions 480 mm (W) x 44 mm (H) x 250 mm (D) [16-15/16” (W) 1-3/4” (D) x 9-7/8”] (when shipped, excluding projections such as knobs) Weight Approx. 3.4 k g (7.5 lbs.) Frequency res[...]

Na0402-0 3TR001013AAA Printed in China N 19 2002 © Matsushita Communication Industrial Co., Ltd. All rights reserved. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 Panasonic Sales Company Division of Matsushita Electric of Puerto Rico Inc. Ave. 65 de Infanteria. Km. 9.5 San Gabriel Industrial Park, Car[...]