Panasonic WV-SF448E manuale d’uso

Before attempting to connect or operate this pr oduct, please read these instructions carefully and save this manual for futur e use. The model number is abbreviated in some descriptions in this manual. Installation Guide Included Installation Instructions Network Camera Model No. WV -SF448/WV -SF448E[...]

2 The model number and serial number of this product may be found on the surface of the unit. Y ou should note the model number and serial number of this unit in the space provided and retain this book as a permanent r ecord of your purchase to aid identification in the event of theft. Model No. Serial No. NOTE: This equipment has been tested and f[...]

3 Contents Important safety instructions ......................................................................................................... 4 Limitation of liability ....................................................................................................................... 5 Disclaimer of warranty ................................[...]

4 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all war nings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara - tus (including amplifiers) that produc[...]

5 Limitation of liability THIS PUBLICA TION IS PROVIDED “AS IS” WITHOUT W ARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY , FITNESS FOR ANY P ARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD P AR TY'S RIGHT . THIS PUBLICA TION COULD INCLUDE TECHNICAL INACCURACIES O[...]

6 Main functions 360° monitoring with a wide variety of transmission modes With the super -wide-angle fisheye lens, 360° monitoring is possible with a single camera. The 360° camera includes a wide variety of image capture modes that perform distortion corr ection: Panorama, Double Panorama, Quad PTZ, Single PTZ, and Quad streams (H.264/VGA). H.[...]

7 System r equir ements for a PC CPU: Intel ® Core TM 2 Duo 2.4 GHz or faster recommended Memory: 512 MB or more (A minimum of 1 GB memory is r equired when using Microsoft ® Windows ® 8, Microsoft ® Windows ® 7 or Microsoft ® Windows Vista ® .) Network Interface: 10BASE-T/100BASE-TX 1 port Audio Interface: Sound card (when using the audio f[...]

8 T rademarks and register ed trademarks Copyright  • Adobe, Acr obat Reader , and Reader are either r egistered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.  • Micr osoft, Windows, W indows Vista, Inter net Explorer , ActiveX, and DirectX are  eith[...]

9 Pr ecautions Refer installation work to the dealer . Installation work requir es technique and experi - ences. Failure to observe this may cause fir e, electric shock, injury , or damage to the product. Be sure to consult the dealer . Stop the operation immediately when something is wrong with this pr oduct. When smoke goes up from the pr oduct, [...]

10 Do not damage the power cable. Do not damage, fabricate, twist, stretch, bundle, or for cibly bend the power cable. Do not place heavy objects. Keep away from heat sour ces. Use of the damaged power cable may cause electric shock, short circuit, or fir e. Consult the dealer for repair . T urn the power off when cleaning this product. Failure to [...]

11 About SD memory card  • Befor eremovingtheSDmemorycardfrom the camera, it is necessary to select “Not use” for “SD memory card” first. The recor ded data may be corrupted if the SD memory car d is removed when “Use” is selected for “SD memory card”. Refer to page 22 for descriptions of how to insert/ [...]

12 Pr ecautions for Installation Panasonic assumes no responsibility for injuries or pr operty damage resulting fr om fail- ures arising out of impr oper installation or operation inconsistent with this documentation. This camera is designed to be used indoors. This product is not operable outdoors. Do not expose this camera to direct sunlight for [...]

13 Screw tightening  • The screws and bolts must be tightened with an appropriate tightening tor que according to the material and str ength of the installation area.  • Do not use an impact driver . Use of an impact driver may damage the screws or cause tightening excessively .  ?[...]

14 Major operating contr ols About the [INITIAL SET] button After turning off the power of the camera, turn on the power of the camera while holding down this button, and wait for about 5 seconds or more without r eleasing this button. W ait about 2 minutes after releasing the button. The camera will start up and the settings including the network [...]

15 <Inside view of the sub cover (with sub cover removed)> Network connector 12 V DC power supply terminal Built-in microphone External I/O terminals Audio cable connector Camera fixing screw • When the privacy mode is off • When the privacy mode is on <Rear view> Camera attachment fixing screws Camera attachment fixing screw[...]

16 Camera attachment (accessory) Direction marker for installation Camera attachment position marker[...]

17 Pr eparations When installing the camera, there ar e 4 methods as specified below .  • Usingthetwo-gangjunctionbox( ☞ pages 19)  • Installingthecameradir ectlyontheceilingorwall( ☞ page 20)  • Using the optional ceiling mount bracket WV -Q105* 1 (for direct m[...]

18 Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed, cut out a portion of the enclosure to open a cable access hole. Side cable access hole IMPORT ANT :  • T o pr event injury and pr otect cables, smooth opened cable access holes of the enclosure with a file or other tool. Note:[...]

19 Method of camera installation Using a two-gang junction box Secure the camera attachment (accessory) to the two-gang junction box built in a ceiling or wall using the fixing screws (locally pr ocured). TOP TOP 46 mm {1-13/16 inches} Direction marker for installation T wo-gang junction box Camera attachment (accessory) Fixing screws (4 pcs., loca[...]

20 Installing the camera directly on the ceiling or wall Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the cable. Remove the template label, and mount the camera attachment (accessory) by fixing 4 screws (locally procur ed). 46 mm {1-13/16 inches} Arrow 83.5 mm {3-9/32 inches} Cable access hole (?[...]

21 Using the optional ceiling mount bracket WV -Q105 (E model only) When using the optional ceiling mount bracket to mount the camera, first place the installation tem - plate (WV -Q105 accessory) on the ceiling, and then make a hole in ceiling and mount the WV -Q105. Next place the installation template label (accessory) on the ceiling, and make a[...]

22 IMPORT ANT :  • WheninsertinganSDmemorycar d,makesurethedir ection.  • Befor e removing the SD memory card, select “Not use” for “SD memory card” on the [SD memory card] tab of the “Basic” page first. T urn off the power after “Not use” [...]

23 Connection Before starting the connection, turn off the power of this camera and the devices to be connected. Check and prepar e the requir ed devices and cables for connection. Note:  • Since the connector storage section does not have a sufficient space, use a LAN cable that do not exceed the sizes described in the[...]

24 IMPORT ANT : • Connect/disconnect the audio cables and turn on the power of the camera after tur ning off the power of the audio output devices. Otherwise, loud noise may be heard fr om the speaker . x Connecting an external microphone and an external speaker Connect the audio cable (accessory) to the audio cable connector , then conn[...]

25 v Connecting an External I/O terminal Connect the cables of external devices to the External I/O terminal plug (accessory). q When connecting an external device, remove 8 mm - 9 mm {5/16 inches - 11/32 inches} of the outer jacket of the cable and twist the cable core to pr event the short circuit first. Specification of cable (wire): 20 AWG - 26[...]

26 IMPORT ANT :  • Do not connect 2 wires or more directly to a terminal. When it is necessary to connect 2 wires or mor e, split the wire and connect the split wir es to the terminal.  • Input and output of the External I/O terminal 2 and 3 can be switched by configuring the set[...]

27 IMPORT ANT :  • Besur etousethepowercordplugpr ovidedwiththisproduct.  • Besureto fullyinsert thepower cordplug(accessory) intothe 12V DCpower supplyterminal. Otherwise, it may damage the camera or cause malfunction.  • Wheninstal[...]

28 Installation Camera mounting Mount the camera with the camera attachment (accessary) Installation shall be conducted after turning off each device. z Determine the mounting position and mounting method for the camera. <Using a two-gang junction box> Secure the camera attachment (accessory) to the two-gang junction box (locally pr ocured). [...]

29 v Using the camera attachment position marker as a guide, match the “OPEN” position of the camera to the projection of the camera attachment (accessory). b Engage the camera attachment fixing screws in the r ear of the camera with the camera mounting holes of the camera attachment (accessory) and rotate the camera in the dir ection of the ar[...]

30 n Tighten the camera fixing screw . IMPORT ANT : • Secur ely tighten the camera fixing screw . Failure to do so may cause damage or the camera to drop. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}) m Attach the sub cover . (The illustration is an example of using a two-gang junctio[...]

31 Configur e the network settings Configuring the camera so that it can be accessed from a PC The following are descriptions for when the camera with default settings is configur ed. If you are using fir ewall software on your PC, the Setup Pr ogram may not be able to find any cameras on your network. Configure the setting of the camera after temp[...]

32 c Selectthecamerayouwanttoconfigur e,andclick[AccessCamera]. Note: • When cameras ar e displayed in [Panasonic IP Setting] scr een, click the camera with same MACaddressastheMACaddr essprintedonthecamerathatyouwanttoconfigure. v Iftheinstallationscr een?[...]

33 T roubleshooting Before asking for r epairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below . Symptom Cause/solution Reference pages Power is not turned on. When using DC power supply  • Is12V[...]

34 Specifications • Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: 12 V DC*: 610 mA/ 7.3 W PoE 48 V : 140 mA/ 6.7 W (Class 0 devices) * ONL Y CONNECT 12 V DC CLASS 2 POWER SUPPL Y or LIMITED POWER SOURCE. Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Ambient operating humidity: Less than 90 %[...]

35 ELC (Maximum exposure time): •WithSuperDynamicOn ELC (1/30 s) •WithSuperDynamicOff ELC (1/30 s), ELC (3/100 s), ELC (3/120 s), ELC (2/100 s), ELC (2/120 s), ELC (1/100 s), ELC (1/120 s), ELC (1/250 s), ELC (1/500 s), ELC (1/1000 s), ELC (1/2000 s), ELC (1/4000 s), ELC (1/10000 s) Auto slow shutter: Of f (1/30 s), max.[...]

36 • Network Network: 10BASE-T/100BASE-TX, RJ-45 connector Resolution: 2MPanorama[16:9]/2MDoublePanorama[16:9]: H.264(1) H.264(2) JPEG 1920x1080/640x360/320x180 max.30 fps 640x360/320x180 max.30 fps 1920x1080/640x360/320x180 max.30 fps 1MPanorama[16:9]/1MDoublePanorama[16:9]: H.264(1) H.264(2) JPEG 1280x720/640[...]

37 Protocol: IPv6: TCP/IP , UDP/IP , HTTP , HTTPS, RTP , FTP , SMTP , DNS, NTP , SNMP , DHCPv6, MLD, ICMP , ARP IPv4: TCP/IP , UDP/IP , HTTP , HTTPS, RTSP , RTP , R TP/RTCP , FTP , SMTP , DHCP , DNS, DDNS, NTP , SNMP , UPnP , IGMP , ICMP , ARP OS *2 *3 : Microsoft Windows 8 Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP SP3 Browse[...]

38 Standar d accessories Optional accessories Installation Guide (this document) ............................................... 1 pc. W arranty card (P model only) ..................................................... 1 pc. CD-ROM* 1 ................................................................................ 1 pc. Code label* 2 ..............[...]

[...]

Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic pr oducts and batteries should not be mixed with general household waste. For proper tr eatment, recovery and r ecycling of old products and used batter[...]