Pelco 9770 manuale d’uso

INSTALLATION/OPERATION C1555M-G (12/07) Sy stem 9770[...]

2 C1555M-G (12/07)[...]

C1555M-G (12/07) 3 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 List of Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 C1555M-G (12/07) List of Illustrations 1 CM9770-MXB Mounting Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Mounting the CM9770 -MXB on T op of the Mounting Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

C1555M-G (12/07) 5 List of T ables A LEDs Illuminated During a Basic Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 B Data Connections—Single Node Systems Without a Ho t Switch . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

6 C1555M-G (12/07) Description The System 9 770 is a full- featured vide o matrix switch ing control sy stem that allows users to view and control u p to 2,048 came ras and 512 monitors o n a single no de. The System 9 770 has the f ollowing basic components : • CM9700-CC1—This is th e system CPU; connect matrix bays, keyboards, PTZ camera cont[...]

C1555M-G (12/07) 7 MODELS Controller and CPU Components CM9700-CC1 CPU controller; 120 V AC, 60 Hz or 230 V AC, 50 Hz. CM9700-SER Serial communication card (RS- 422 SERCOM); provid es 8 communications ports to in te rface peripheral equip m en t (4 maximum per CPU). CM9700-SER-32 Port expansio n unit; 32 s erial communica tion (SERCOM) po rts per u[...]

8 C1555M-G (12/07) Keyboards The following keyboards ar e compatible with the Syste m 9770: CM9760-KBD Full-function desktop variable- speed keyboard; 120 V AC, 60 Hz. CM9760-KBD-X Same as CM9760-KBD except 230 V AC, 50 Hz. CM9760-KBR Full-function 19-inch EIA rack mount keyboard; 120 V AC, 60 Hz. CM9760-KBR-X Same as CM9760-KBR except 230 V AC, 50[...]

C1555M-G (12/07) 9 Installation UNPACKING 1. Unpack and insp ect all equi pment, and veri fy delivery a ccording to t he packing slip. Before shippin g, Pelco connec ts, tests, and programs eac h system accordi ng to the individ ual sales order . Contact Pelco immedia tely if there is an y discrepancy in the equipme nt that you r eceive. CM9700-CC1[...]

10 C1555M-G (12/07) MOUNTING Install the System 9770 in EI A-standard 19 -inch (48 .26 cm) racks. CM9770-MXB 1. Install the CM9770-MXB mounting ba ff le first (refer to Figure 1). The mounting baffle uses 1 ra ck unit (RU), and i t has front and re ar mounting ears , which are atta ched to the front and rear mo unting racks. The rear mo unting brac[...]

C1555M-G (12/07) 11 2. Install the CM9 770-MXB matrix ba y on top of t he mounting baff le. Refer to Figure 2. In a single-bay installation, always leave 1 RU of space above the matr ix bay for airflow . In a multiple-b ay installation you do not ne ed to leave ad ditional RUs ope n between units. However , you must always leave 1 RU of space above[...]

12 C1555M-G (12/07) CM9700-CC1 The CC1 must be located near th e CM9770-MXB matrix ba ys. Th e maximum distance between the CC1 an d the matrix bays should be no more than 4,000 feet (1 ,21 9 m). The CC1 occupies 4 RUs or 7 inche s (17.18 cm) of vertical space in a universal mount. Allow 1 RU of space ab ove the CC1 for air circul at ion. T o mount[...]

C1555M-G (12/07) 13 V IDEO INPUT/OUTPUT CONNECTIONS The following steps provide an overview of how to conne ct video inp ut and output sources. Mor e complete proc edures are provided in the subsequent sections. 1. Install the CM97 70-VCC and CM97 70-VMC cards in the matri x bay . Refer to the Installing Video Inpu t C ards (CM9770-VCC) section and[...]

14 C1555M-G (12/07) INSTALLING VIDEO INPUT CARDS (CM9770-VCC) The first video input card is inserted into slot 1; the next card is inser ted in to slot 2 (refer to Figure 4). T o add a video ca rd, slide the card into the first availa ble slot. The CM9770-MXB ca n contain a max imum of eight v iideo input car ds. How to T urn On the Pelco V-Sync Si[...]

C1555M-G (12/07) 15 INSTALLING MONITOR OUT PUT CARDS (CM9770-VMC) The monitor output ca rd located in slot 10 is the pr imary card, and it handles video fo r monitors 1-16. Refer to Figure 5. Note that the CM9770-MXB will not fun ction without a CM977 0-VMC card inserted in to slot 10. An optional secondary VMC card can be ins talled in slo t 9. Th[...]

16 C1555M-G (12/07) PERFORMING A BASI C LED CHECK Y ou should perf orm a basic LED c heck before yo u connect any video input or output to t he matrix bay. The LED check allows you t o ensure that the system is operat in g pr op er ly . 1. T urn on the power switch on the rear of the ma trix ba y . The front cover can either be open or clo sed duri[...]

C1555M-G (12/07) 17 INSTALLING REAR PANEL BNC CARDS The following rear panel car ds can be used with the CM9770-M XB matrix bay: • CM9770-RPC—the BNC card for vid eo connecti ons • CM9770-RPM— the BNC card fo r monitor con nections • CM9770-DF C—this is a downf rame card and cable assembl y used to connect multiple matrix bays; refer to[...]

18 C1555M-G (12/07) Change the T ermination Jumpe rs on a Rear Pa nel Vi deo BNC Card In a single- bay , non-looping c onfiguration (up to 256 came ras and 32 mo nitors), th e jumpers must be set in the ter minated posit ion. Refer to the Installing Additional Mat rix Bays—Sidefr aming and Down framing sectio n in the Appendix fo r details on te [...]

C1555M-G (12/07) 19 Looping Video When looping video out to another device (such as a DVR, VCR, or sw itcher), the connection instructio ns depend on the size of y our system, as follows: • In a system containing 32 monitors or fewer (the video is not downfra med), use the CM9 700-VPP panels to loop the video ou t. Co nnect the DFC cables that ar[...]

20 C1555M-G (12/07) Insert or Replace a Rear Pane l Monitor BNC Card (CM9770-RPM) 1. Slide the moni tor BNC card int o the card gu ides at the rear of the bay . From the rear of the bay, the slot at the far left pr ovides the connection point for th e primary monitor ou tpu t card inserted in the fro nt of the bay into slot 10. 2. Push the BNC card[...]

C1555M-G (12/07) 21 V IDEO INPUT/OUTPUT CAPACITY Single Bay A single CM97 70-MXB can suppo rt up to 256 camer a inputs (in i ncrements of 32) an d 32 monitor outputs (in i ncrements of 16 ). Ref er to Figure 12. Figure 12. Sample CM9770 Sy stem with 256 Cameras and 32 Monitors .................. CM9770 MXB CM9700-CC1 CAM 1 CAM 17 CAM 256 MONITOR 32[...]

22 C1555M-G (12/07) Multiple Bay s, Single Node In a single-no de system with on e CM9700-CC1 (not networked), yo u can connect multiple CM9 770-MXBs using “side framing” and “downframing” for a maximu m capacity of 2,04 8 camera inputs and 256 monito r ou tputs. • Sideframing—T o expand the matr ix video inpu ts beyond 25 6, you can us[...]

C1555M-G (12/07) 23 Figure 14. Sample Sideframing Sy stem Using an Output Bay CM9700-CC1 MONITOR 1 OUTPUT BAY TO CM9700-CC1 MONITOR 32 OPTIONAL: ADD CM9770-VCC INPUT CARDS AND BNC INPUT CARDS AS NECESSARY TO CONNECT SIDEFRAME CABLES FROM ADDITIONAL BAYS OR TO CONNECT CAMERAS DIRECTLY TO THE OUTPUT BAY (WHEN USING SEVEN MATRIX BAYS OR FEWER) TO CM97[...]

24 C1555M-G (12/07) • Downframing—T o expand the matrix video outputs beyond 32, yo u can loop the video from the fir st CM9770-MXB to subseq uent CM9770-MXB units for an addit i on al 32 monitor outputs on each mat rix bay . Refer to Figure Figure 15.. Y ou can connect a max imum of eight bays in a down framing config uration for a total MXB c[...]

C1555M-G (12/07) 25 Networked Sy stem A networked system with multiple nodes uses an NIU (network interf ace unit) to combine up to 24 CM9700-CC1 systems into a netwo rk—each CC1 system is called a “node.” Multiple CM9770-MXB units can be connecte d to each CC1 through sid eframing and downfr aming . An N IU is a CM9700-CC1 load ed with netwo[...]

26 C1555M-G (12/07) THE POWER SUPPLY MO DULE (CM9700-MPS) Y ou can add a backup power supply module (CM9700-MP S) to a System 9770 matrix bay to pro vid e re dundancy to the ba y’ s power supp ly . INSTALL A BA CKUP POWER SUPPLY 1. Open the matrix bay front cover . 2. Remove the blank-off plate fr om the empty power inpu t slot. 3. Slide the powe[...]

C1555M-G (12/07) 27 HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE The matrix b ay is shipped from the fa ctory configu red for the c orrect input power . The power input panel, on the rear panel of the matrix bay , provides two separate p ower input rec eptacles, on e for each po wer supply. Each power inpu t receptacle is equipped with a fuse a[...]

28 C1555M-G (12/07) HOW TO T URN OFF THE AUDIBLE POWER SUPPLY ALARM The power supply mod ule co nt ains an au dible alar m, which op er ates in conju nctio n with the fault LEDs lo cate d o n the p ower sup pl y fro nt pa ne l. T o turn off this alarm, complete th e following steps: 1. T urn off the matrix bay power . 2. Remove the power supply mod[...]

C1555M-G (12/07) 29 SY STEM DEVICE CONNECTIONS 1. T urn off power to all system devices and disconnect all power line cord s while connecti ng system devi ces. 2. Complete the following steps to connect one or mo re CM9760-KBD system keybo ards. a. Co nn ect the keyboard to the CM950 5- UPS using the straight cable supplied with th e keybo ard. b. [...]

30 C1555M-G (12/07) Figure 22. CM9700-MGR PC Pin-Out Detail 6. Install any additional system peripheral de vices. Ref er to the manuals for the ind ividual devices for instructions. Refe r to the Data Connections section and you r Port Assignment s table for directions on which p or t to use for each device. 7. Connect all power line cords to the e[...]

C1555M-G (12/07) 31 RS-422 COM PORT (“SERCOM”) CONNECTIONS All peripher al equipment in a System 9770 connect th rough the RS-42 2 COM ports on the CM9700-CC1 r ear panel. (Th ese ports a re a lso known as “sercom” po rts, short for “serial communication” po rts.) If you exceed the nu mber of CM9700 -CC1 rear panel ports avail able, you[...]

32 C1555M-G (12/07) T able D. Data Connections—Single Node, Hot-Switched Sy stem T able E. Data Connections—Networked, Hot-Switched Sy stem MXB connecti on(s) CC1 port 6 an d next consecu tive ports, as necessary—connected throug h the hot switch. Hot Switch conn ection CC1 port 5. Other peripher als Any available port(s)— connected through[...]

C1555M-G (12/07) 33 Figure 23. Sample CM9770-MXB to CM9700-CC1 Connection Figure 24. Sample CM9770-MXB and CM9700-CC1 Connections in a Networked Sy stem CM9700-CC1 CM9770-MXB PIN 1 PIN 8 REVERSED CABLE CM9770-MXB RJ-45 PIN-OUTS CM9700-CC1 RJ-45 PIN-OUTS REVERSED DATA CABLE PIN 1 = PIN 2 = PIN 7 = PIN 8 = TX+ TX- RX- RX+ PIN 1 = PIN 2 = PIN 7 = PIN [...]

34 C1555M-G (12/07) Sy stem Start-Up T o start up your system you mu st complete the following tasks: 1. Install the CM9700-MGR on a PC co nnected to the CC1. Refer to System Device Connections in the Installation section for instructions on con ne cting a PC to the CC1. Refer to the CM 97 00-MGR Software Guide for instructions on in stalling the C[...]

C1555M-G (12/07) 35 V ERIFY SY STEM OPERATION 1. Power up all the remainin g eq uip m en t. 2. After the CM9700-CC1 loads the configuration files, “ SYSTEM 97XX” appears on the CM9760-KBD LCD. 3. Enter the de fault operat or password on the CM9760- KBD keypad. “ENTE R MONITOR #” appears on th e LCD. 4. Enter 1, and then press the MON key. ([...]

36 C1555M-G (12/07) DISPLAY THE CM9770-MXB SOFTWARE V ERSION LEVEL T o display the software versi o n level on a system monitor , complete the following steps: 1. Enter the monitor number , and then press the MON key . 2. Enter 999997, and then press the CAM key . The software versio n nu mber appears on the monito r . DISPLAY A BLUE RASTER SCREEN [...]

C1555M-G (12/07) 37 Programming Y our Sy stem When you open CM9700-MGR, th e Getting Star ted dialog bo x appears.. Figure 27. Getting Started Dialog Box The CM970 0-MGR provide s the follo wing config uration optio ns: • Setup Wizard: This op tion opens th e Setup Wizard (a series of dialo g boxes), which p rovides assista nce in setting up a ne[...]

38 C1555M-G (12/07) GETTING HELP USING CM9700-MGR Instruction s fo r how to use CM 9700-MGR are pr ov ided througho ut the sof twa re . The CM9700-M GR provides wiz ards to help user s complete tasks, such as ad ding a device or a group. Ea ch wizard screen contains i nstructions and explan atory text. Figure 28. Samp le Wizard Page When you are w [...]

C1555M-G (12/07) 39 Operation A brief description of System 9770 operation is provided here. OPERATING Y OUR SY STEM 9770 System 9770 ca n be operated wit h a CM9760-KBD o r KBD300A keyboar d. Operation instructions a re provided belo w , but you shou ld be come familiar with the detailed instru ctions provided in the app rop riate keyboard manual.[...]

40 C1555M-G (12/07) Appendix SY STEM ARCHITECTURE The System 9 770 is similar to Pelco’ s System 9 760 but uses di fferent matrix bay hardwa re and provides more featur es. Users fami liar with the System 9760 sh ould note the following diff erences: • Each System 9770 video in put card (CM9770-VCC ) receives input from 32 video con nections (f[...]

C1555M-G (12/07) 41 INSTALLING ADDITIONAL MATRIX BAY S—SIDEFRAMING AND DOWNFRAMING When either more came ras and/or mor e monitor s are need ed than ca n be acco mmodated by one matrix bay (256 x 32), you can insta ll additiona l matrix bays in either of the f ollowing configurat ions: • Sideframing—This option incr eases the number of a va i[...]

42 C1555M-G (12/07) Downframing T o expand t he matrix vid eo outputs be yond 32, you ca n downframe the video from th e first CM9770-M XB to subseque nt CM9770-MXB un its for an additional 32 monito r outputs on each matr ix bay . Refer to Figure 31. Y ou can connect a maximum of eight bays in a downframi ng configurat ion for a total MXB capacity[...]

C1555M-G (12/07) 43 Refer to the Downframing section on the following pa ge for instructions o n setting the term ination jumpers in t he downframed bays. Figure 31. Downframing with DFC Cards Figure 32. Looping Vi deo Out in a Downframed Configuration[...]

44 C1555M-G (12/07) A downframe cable is used to con nect the bottom connect or o f the RPC card to a downframe car d. Figure 33. DFC Cable Downframe Cards The following downframe cards are availabl e for the System 9770: • CM9770-DFC—This is the “n o looping” downframe card. • CM9770-DFL—Th is is the “loo ping” downframe card. If y[...]

C1555M-G (12/07) 45 Figure 34. DFC Card Figure 35. CM9770-DFL C ard INPUT FROM BAY ABOVE (LOWER-NUMBERED SLOT) INPUT FROM BAY ABOVE (HIGHER-NUMBERED SLOT) OUTPUT TO BAY BELOW (HIGHER-NUMBERED SLOT) OUTPUT TO BAY BELOW (LOWER-NUMBERED SLOT) JP16 JP15 JP14 JP13 JP12 JP11 JP10 JP9 JP8 JP7 JP6 JP5 JP4 JP3 JP2 JP1 JP32 JP31 JP30 JP29 JP28 JP27 JP26 JP25[...]

46 C1555M-G (12/07) HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1 If you have ordered a re placement or additional CM9700-SER s erial communica tion card, c omplete the following steps to configure th e jumpers on the CC1 boar d for the s lot position t he new SER card will occupy . 1. T urn off the CC1 power switch. 2. Remove the top cove[...]

C1555M-G (12/07) 47 Figure 37. SER Card Jumper Assignments 4. Insert the new SER card into an available ISA slot. The default CM97 00-CC1 configuration p rovides SER cards in ISA slots 1 an d 2, so you will most likely insert the new card into slot 3 or 4. Refer to Figure 38. 5. Replace the to p cover of the CC1. 6. Power up the CC1. Figure 38. How[...]

48 C1555M-G (12/07) V IDEO INPUT CARD (CM9770-VCC) DETAIL Figure 39. CM9770-VC C Card T able H. Video Input Card (CM9770-VCC) LEDs Front Panel Label Color When LED Is On + Green The +5 VDC power source is functioning properly . - Green The -5 VDC power source is functioning pro perly . HB Amber The CPU is ac tive; this “h eartbeat” LED blinks a[...]

C1555M-G (12/07) 49 MONITOR OUTPUT CARD (CM9770-VMC) DETAIL Figure 40. CM9770-VMC Card T able I. Monitor Output Card (CM9770-VMC) LEDs Front Panel Label Color When LED is on or blinking + Green The +5 VDC power source is functioning properly . - Green The -5 VDC power source is functioning properly . HB Amber The CPU is a ctive; this “heartbea t?[...]

50 C1555M-G (12/07) The monitor ou tput card DIP switch selects variou s options. These swi tches are set in the proper po sition at the facto ry , but they can be change d, if necessary . T able J. Monitor Output Card DIP Switch Switch 1 ON OFF Color Sy stem PA L NTSC Switch 3 OFF ON OFF ON Switch 2 OFF OFF ON ON Port 1 RS-422 Baud Rate 9600 19200[...]

C1555M-G (12/07) 51 NETWORKING Networking of systems is required when the following condi tions apply: • T wo or more individ ual systems need to share video and cont rol features. Th e CM9700-NW1 netwo rk interface uni t (NIU) allows yo u to link any combination of the following syst ems in to a network: – One or more System 9740 or 9760 syste[...]

52 C1555M-G (12/07) CONNECTING SATELLITE DEVICES Y ou can connect a CM6800E-48X8 ma trix swit cher or a CM9760-SA T device to the System 9770. Refer to the CM9760 -SA T Installation/Operation ma nu al or to the CM6800E-4 8X8 Installation/Oper ation manual for inst ru ctions. Th e procedure for using a satellite device with a CM9700-CC1 is the same [...]

C1555M-G (12/07) 53 HOW TO INSTALL V IDEO PA TCH PANELS (CM9700-VPP) There are two ways you ca n mount a CM9700 -VPP video p atch panel int o a rack. 1. Single panels onto a rack 2. Up to 16 panels using the CM9700-VPP-RK The following illustrat i on shows how to mount a single panel on to a rack. The panel is mounted ho rizo ntally . Figure 44. CM[...]

54 C1555M-G (12/07) MOUNTING THE CM9770-M XB IN AN OPEN RACK Figure 46. Mounting the CM9770 -MXB in an Open Rack[...]

C1555M-G (12/07) 55 DOS ENVIRONMENT AND COMMAND REFERENCE DOS stands for D isk Operating System. Eve ry time you turn on the CM970 0-CC1 or every tim e you reboot (Alt +Ctrl +D el), the comp uter loads DOS from the CC1 disk into the memo ry (RAM). Once loaded DOS lets you run other progr ams, in partic ular , the CM97 00.EXE progra m. On factory-co[...]

56 C1555M-G (12/07) File Names and DOS File names in DOS are limit ed to eight characters . If you issue a command to change the name of the conf iguration files in th e 9700 directory to a name exce eding eight ch aracters, t he name is trun cated to eight characters. The Windows-ba sed CM9700-MGR p rogram does not all ow y ou to use more than eig[...]

C1555M-G (12/07) 57 If you entered the same command ag ain (CD ..) at the c:9700> prompt and pressed the EN TER key , you would finally end u p again a t the root directory as p reviously done . T o proceed dire ctly from the direc tory you are in to an other direct ory , no matter where in the d i rectory tre e you are, enter the total direct [...]

58 C1555M-G (12/07) DOS REFERENCE The following table provide s a list of the most common DOS comma n ds that you are most likely t o use when operating the CC1. In addition, yo u can use the command HELP to access the MS-DOS command re fe rence on the CC1. T able K. DOS Command Reference Directory NOTE: In DOS, the backslas h symbol (“ “) us[...]

C1555M-G (12/07) 59 COMMAND EXAMPLE(S) SWITCHES COMMENTS FASTHELP C:> FAST HE LP Lists and briefly desc ribes every command provided with MS-DOS. This list is much less detail ed than the list you get u sing the “HELP” command. C:>FASTHELP DIR S pecifies the name of the command that you wish F A STHELP to give informatio n ab ou t. In t[...]

60 C1555M-G (12/07) T roubleshooting Problems with the CC1 Problems with the CC1 as part of a 97 70 system may occur in the following areas: • The CC1 itself • Setup files (also kn own as configurat ion files) • Peripheral devices conn ected to th e CC1 • DOS operating syst em A log is recommended fo r keeping track of change s ma de to the[...]

C1555M-G (12/07) 61 Monitor Display Problems Problem: T ext characters (such as in camer a titles) do not display properly . Solution: The CM9770-VMC monitor o utput card in the ma trix bay may not be set for the correct vid eo format (NTSC or P AL). Check switch 1 on the DIP switch an d verify th at the switch is in t he corr ect posi tion , as id[...]

62 C1555M-G (12/07) Specifications CM9700-CC1 ELECTRICAL Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, autoranging Power Consumpt ion 57 W Processor Pe ntium ® class CPU Clock Speed 733 MHz Memory 64 MB RAM Disk Drive 3.5-inch, 1. 44 MB Flash Disk Stor age 32 MB solid-state flash memor y Diagnostic Mo nitor Output 1, VGA I/O Ports 16 RS-422 port[...]

C1555M-G (12/07) 63 CM9770-MXB ELECTRICAL Input Voltage 100-240 VAC, 50/60 Hz, autorangin g Power Consumptio n 60 watts maximum (ful ly populated) Communication Full duplex RS-422 using an RJ-45 connector VIDEO Inputs Card slots su pport up to 2 56 inputs per bay Outputs T wo output card slots for supportin g 32 outputs per bay Video Input Level 0.[...]

64 C1555M-G (12/07) Regulatory Notices CM9780-MXB This device co mplies with Part 15 of the FCC Rul es. Operation is subject to the following two conditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interf erence received, including in te rference that may cause und esire d operat io n. RADIO AND TE[...]

PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without char ge, any merchandise proved defective in material or workmanship for a period of one year after the date of sh ipment. Exceptions to this warranty are as noted below: • Five years on fi ber optic pro ducts an d TW3000 Serie s unshielde d twisted pair trans[...]

W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pe lco.com ISO 9001 Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab [...]