Pelco C1043M-A manuale d’uso

ICI3000P Inter-Check Point-Of-Sale Monitoring System Installation/Operation Manual C1043M-A (2/96) ® PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981 FAX (800) 289-9150 or (1-559) 292-3827[...]

TABLE OF CONTENTS Section Page 1.0 W ARNINGS ....................................................................................................................................... 1 2.0 SCOPE .............................................................................................................................................. 2 2.1 DESCRIPT[...]

LIST OF ILLUSTRA TIONS Figur e Page 1 TYPICAL ICI3000P SYSTEM USED WITH ST AND-ALONE CAMERAS .............................................. 2 2 ICI3000P PAR TYLINE WIRING CONFIGURA TION .............................................................................. 4 3 DEF A UL TING INTER-CHECK SYSTEM. ...............................................[...]

iv P elco Manual C1043M-A (2/96) (This page intentionally left blank.)[...]

P elco Manual C1043M-A (2/96) 1 INSTALLATION/OPERATION MANUAL ICI3000P INTER-CHECK ® POINT-OF- SALE MONITORING SYSTEM Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying th[...]

2 P elco Manual C1043M-A (2/96) 2.0 SCOPE The information contained within this manual covers the installation and operation of the Inter-Check ICI3000P cash register interface system. Installation should be in accordance with all applicable local and national electric codes, using approv ed materials only . Please familiarize yourself with the inf[...]

P elco Manual C1043M-A (2/96) 3 3.0 INST ALLA TION 3.1 SETTING UP ICI1000PIM P ARAMETERS AND BENCH TESTING NOTE: Please familiarize yourself with the information in this manual prior to installation and operation. Contact the customer's register dealer/installer prior to installation and opera- tion. Some warranties and/or service agree- ments[...]

4 P elco Manual C1043M-A (2/96) DI P S W I TCH D ESCRI PTI ON- - Swi t ch # F unct i on 1 2 3 4 B ank addr es s B ank addr es s B ank addr es s B ank addr es s 5 6 7 8 l oop baud r at e NC NC 12 34 5678 O PE N 1 2 3 4 5 6 7 8 9 10 11 12 16 15 14 13 VI DEO OUT VI DEO I NP UT S TO M ONI CAMERAS 1 - 15 1 2 3 4 5 6 7 8 9 10 11 12 16 15 14 13 VI DEO OUT[...]

P elco Manual C1043M-A (2/96) 5 3.3 ICI3008/ICI3016 INST ALLA TION Refer to Figure 1 for a typical ICI3000P configuration. 1. Connect the 9-pin switcher interface cable (supplied with the ICI3008/ICI3016 switcher) into the port labeled “RS 232” of the ICI3000P . 2. Connect the modular phone plug of the switcher interface cable into the port lab[...]

6 P elco Manual C1043M-A (2/96) DI P S W I T CH DE S CRI P T I ON- - Sw i t c h # F unct i on 1 2 3 4 B ank addr es s B ank addr es s B ank addr es s B ank addr es s 5 6 7 8 l oop baud r at e NC NC 12 34 567 8 O PE N 1 2 3 4 5 6 7 8 9 10 11 12 16 1 5 14 13 VI D EO OUT VI D EO I NP UT S TO M O N I CA M E RA S 1 - 1 5 1 2 3 4 5 6 7 8 9 10 11 12 16 1 [...]

P elco Manual C1043M-A (2/96) 7 3.3.1 Alarm Pin-out Configuration For detailed 25-pin and 9-pin alarm pin-out configura- tion information, see Figure 5 below . 9-PIN CONNECTOR FOR ICI3008 Pin # Alarm Output 1A l a rm Output 1 2A l a rm Output 2 3A l a rm Output 3 4A l a rm Output 4 5A l a rm Output 5 6A l a rm Output 6 7A l a rm Output 7 8A l a rm [...]

8 P elco Manual C1043M-A (2/96) 3.4 EXTERNAL VIDEO ADJUSTMENTS There are five potentiometer adjustments located on the bottom of the Inter-Check unit. These video text ad- justments are for fine tuning only . Major adjustments should be done through the operating software. Use a small tipped, nonmetallic screwdriver for adjusting the potentiometers[...]

P elco Manual C1043M-A (2/96) 9 Figure 7 . Inter-Check’ s T wo T e xt Screens S CRE E N # 1 OR TEX T W I NDOW #1 S CRE E N # OR T EXT W I NDO W # 2 2 PE L CO 4.0 PROGRAMMING To enter the SELECT MENU press enter . The following menu will be displayed on monitor: SELECT MENU 1. Register # 1 or 2 2. Operator # 1 or 2 3. Exceptions on/off 4. Camera s[...]

10 P elco Manual C1043M-A (2/96) • Press [ 3 ] to select internal synchronization (no video). •P ressing F9 will enable you to select an external camera from PELCO’ s ICI3008/ICI3016 Inter - Check switchers. After pressing F9 , the following prompt will be displayed: Enter select # Select camera number that corresponds to the ICI3008/ICI3016 [...]

P elco Manual C1043M-A (2/96) 11 4.6 AUTO CAMERA SEARCH ON/OFF When enabled, this feature monitors your camera system’ s sync generation. If your monitoring camera loses power or is disconnected, the system will auto- matically switch to the next camera for synchroniza- tion. If an active video is not detected, the system will automatically switc[...]

12 P elco Manual C1043M-A (2/96) 4.8.2 Number of Lines for Small Screens 1 and 2 This feature enables you to select the number of data lines displayed on each screen. The dif ference between the “small” and “large” screens is that you may reduce the number of lines displayed on the small screen, while the large screen al w ays displays 17 l[...]

P elco Manual C1043M-A (2/96) 13 4.8.6 Channel Program Menu 4.8.6.1 Partyline Press [ 6 ]. The follo wing prompt will be displayed: CHANNEL PROGRAM MENU 4. Gr oup P oll List 5. Exception Follo w Alarm Time 6. Gr oup Select 4.8.6.2 Channel Program Menu 1. Baud Rate — Not Applicable 2. RS-232 — Not Applicable 3. ISO-Jack — Not Applicable Group [...]

14 P elco Manual C1043M-A (2/96) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 20 21 22 23 24 25 19 18 16 15 17 DB 2 5 - B A CK V I E W PI N 3 = R ECEI VE ( R x ) PI N 7 = G RU N D( DB 2 5 CONNECT O R 1 2 3 4 5 6 7 8 9 DB 9 CONNE CT O R TO S M AR T UNI T DB 9 - B A CK V I E W PI N 3 T A NS M I T ( T x ) PI N 5 = G ROUND ( G n d ) OG nd) =R PR I NTER 4.8.7 Print[...]

P elco Manual C1043M-A (2/96) 15 4.8.10 Shadow List Programming This list tells the 8- or 16-position Inter-Check Switcher which camera and POS terminal are linked together . It is also used to program sequential video switching. The [ S ] hotke y is used to turn switcher sequencing on and of f. Press [ 0 ]. A long list of numbers will scroll up th[...]

16 P elco Manual C1043M-A (2/96) 4.9 EXCEPTIONS Exceptions are cash register transactions of special interest that can be programmed into the ICI3000P units. T ypical transactions are V OID, REFUND, CASH P AID OUT and NO SALE. These types of transactions can then be used to alarm your VCR or other alarmable de vice for video recording. Exceptions c[...]

P elco Manual C1043M-A (2/96) 17 4.9.1 Exceptions using the Column Specific Strategy A Column Specific Exception is used to “flag” a transaction according specific placement of text on the register ticket. As an example, if the word V OID normally appears starting 5 spaces from the left during a void transaction, you would type in the following[...]

18 P elco Manual C1043M-A (2/96) 4.9.3 Exceptions Using the Price Point Editing Strategy This type of exception is used to program an exception that is looking for characteristics in the actual price of the item, rather than a specific word. The keyboard character used in this type of exception strategy is a double bar [ ] and is displayed by press[...]

P elco Manual C1043M-A (2/96) 19 4.9.4 Exceptions with Descriptors If you would like to describe the type of Exception that is being “flagged”, you can use a descriptor . As an example, with our negati ve total, you may want Inter -Check to print the following: “ NEGA TIVE TOT AL ” follo wing the transaction. This is done by simply typing t[...]

20 P elco Manual C1043M-A (2/96) 5.1 REGISTER MASKING This feature allows you to ignore exceptions when they occur on certain registers. As an example, you may ha ve one register dedicated specifically to returns, so you’ll want to ignore refund transactions at this register because they occur constantly . The delete register mask option works co[...]

P elco Manual C1043M-A (2/96) 21 6.0 HOT KEY SUMMAR Y LIST [B] BLOCK SELECT Used to select polling for a block of two (2) or four (4) groups of registers. [C][I] CLEAR COMMUNICA TIONS Clears Communication to PIMs and ICI3000P . [E] EXCEPTION FOLLOW ON/OFF The [ E ] key turns on the Exception Follow sequence for Screen 1. When an exception occurs, t[...]

22 P elco Manual C1043M-A (2/96) [F8] P AGE BACK/P AGE FOR WARD TOGGLE This option allows you to look back one page of text on your monitor to verify data. By using this key you will automatically force the unit into large screen mode. Pressing [ F8 ] again will bring back the cur - rent page of text. The acti ve page will sho w the cur - sor at th[...]

P elco Manual C1043M-A (2/96) 23 7.0 TROUBLESHOOTING This section covers some basic troubleshooting examples and possible solutions for each. Consult this section first before calling your PELCO representative. Problem: ICI3000P unit does not receive data. Solution: Make sure that the data cable is plugged into the D A T A INPUT of the ICI3000P uni[...]

24 P elco Manual C1043M-A (2/96) 8.0 POWER-UP PROCEDURE FOR THE ICI3000P In the ev ent of a power f ailure, the Inter-Check System has a nonvolatile memory and will retain all memory that has been previously saved. Some program func- tions, in order to be used, will have to be activated us- ing the hot keys. Fo llowing is a po wer -up procedure che[...]

P elco Manual C1043M-A (2/96) 25 9.0 SPECIFICA TIONS W eight: 3 pounds Dimensions: Length = 9.50 inches Wi dth = 5.75 inches Height = 1.50 inches Operating T emperature: 35 ° F to 95 ° F Storage T emperature: -4 ° F to 140 ° F Operating Humidity: 20% to 80% non-condensing ELECTRICAL SPECIFICATIONS: FCC Approved : This equipment has been tested [...]

26 P elco Manual C1043M-A (2/96) 9.1 OUTPUT DEFINITIONS WIRE COLOR PIN DESIGNA TION DESCRIPTION White 1 +5 volts (For testing only) Black 2 Signal Ground Red 3 RS232 Current Loop CHANNEL 1 INPUT Green 4 NOT USED Y ellow 5 (Opto y-jack input) ICI1000PIM Input for CHANNEL 1 Blue 6 NOT USED AUXILIAR Y POR T 1 (Printer Port) Communications = Standard R[...]

Pelco Manual C1043M-A (2/96) 27 10.0 W ARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1996, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, without charge, any merchandise proved defec[...]

28 Pelco Manual C1043M-A (2/96) PELCO 3500 Pelco Way Clovis, CA 93612-5699 USA (559) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (559) 292-3827 International customers call 1-559-292-1981 or FAX 1-559-348-1120 (Product specifications subject to change without notice.) C1043M-A ®[...]