Pelco C3412M-D manuale d’uso

INSTALLATION/OPERATION C3412M-D (12/08) Spectra ® IV and Spectra IV SE Series[...]

[...]

C3412M-D (12/08) 3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 C3412M-D (12/08) Dome Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

C3412M-D (12/08) 5 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Aux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

6 C3412M-D (12/08) W elcome Thank you f or purchasin g Pelco’ s premier int egrated do me system, Spect ra ® IV/Spectra IV SE. Y our n ew system featur es a high resolution came ra/optics packa ge with programmab le dome drive software. This manua l is designed primarily t o be a refe rence tool for the installation and opera tion of your system[...]

C3412M-D (12/08) 7 Installation This manual contains inst allation instruct ions only for the Spec tra IV/Spect ra IV SE dome drive. Fo r complete installation instructions for a Spectra IV/Spectra IV SE dome system, r efer to the installation manual shipped with the back box. SWITCH SETTINGS Before installi ng the do me drive, con figure the recei[...]

8 C3412M-D (12/08) SW2 SWITCH 3: CONTROL SYSTEM COMPATIBILITY Coaxial Control Systems Although Spectra IV/S pectra IV SE dome systems can operate with coaxial control systems from many manufacturers, the system is designed for optimal performa nce with Pelco Coaxitron ® cont rol products with in the length sp ecified for coaxial cable. T o compens[...]

C3412M-D (12/08) 9 SW2 SWITCHES 6–8: BAUD SETTINGS Pelco’ s D -type controllers are se t for 2400 baud. The d efault setting for the dome drive i s 2400 baud. If you are using a Pelco D-type controlle r , do not reset SW2 switches 1–3 or SW2 switc hes 6–8. P-type cont rollers can operate a t 2400, 4800, and 9600 baud. Set th e SW2 switches [...]

10 C3412M-D (12/08) T able A. Switch Settings for SW1 P-T ype Control SPECTRA ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 1 OFF OFF OFF OFF OFF OFF OFF OFF 2 ON OFF OFF OFF OFF OFF OFF OFF 3 OFF ON OFF OFF OFF OFF OFF OFF 4 ON ON OFF OFF OFF OFF OFF OFF 5 OFF OFF ON OFF OFF OFF OFF O FF 6 ON OFF ON OFF OFF OFF OFF OFF 7 O[...]

C3412M-D (12/08) 11 T able B. Switch Settings for SW1 D-T ype Control SPECTRA ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1 -5 SW1-6 SW1-7 SW1-8 1 ON OFF OFF OFF OFF OFF OFF O FF 2 OFF ON OFF OFF OFF OFF OFF OFF 3 ON ON OFF OFF OFF OFF OFF O FF 4 OFF OFF ON OFF OFF OFF OFF OFF 5 ON OFF ON OFF OFF OFF OFF OFF 6 OFF ON ON OFF OFF OFF OFF OFF 7 O[...]

12 C3412M-D (12/08) 36 OFF OFF ON OFF OFF ON OFF OFF 37 ON OFF ON OFF OFF ON OFF O FF 38 OFF ON ON OFF OFF ON OFF OFF 39 ON ON ON OFF OFF ON OFF OFF 40 OFF OFF OFF ON OFF ON OFF OFF 41 ON OFF OFF ON OFF ON OFF O FF 42 OFF ON OFF ON OFF ON OFF OFF 43 ON ON OFF ON OFF ON OFF OFF 44 OFF OFF ON ON OFF ON OFF OFF 45 ON OFF ON ON OFF ON OFF OFF 46 OFF ON[...]

C3412M-D (12/08) 13 71 ON ON ON OFF OFF OFF ON O FF 72 OFF OFF OFF ON OFF OFF ON OFF 73 ON OFF OFF ON OFF OFF ON OFF 74 OFF ON OFF ON OFF OFF ON OFF 75 ON ON OFF ON OFF OFF ON OFF 76 OFF OFF ON ON OFF OFF ON OFF 77 ON OFF ON ON OFF OFF ON OFF 78 OFF ON ON ON OFF OFF ON OFF 79 ON ON ON ON OFF OFF ON OFF 80 OFF OFF OFF OFF ON OFF ON OFF 81 ON OFF OFF[...]

14 C3412M-D (12/08) 106 OFF ON OFF ON OFF ON ON OFF 107 ON ON OFF ON OFF ON ON O FF 108 OFF OFF ON ON OFF ON ON OFF 109 ON OFF ON ON OFF ON ON OFF 110 OFF ON ON ON OFF ON ON OFF 1 1 1 O NO NO NO N O F F O NO N O F F 112 OFF OFF OFF OFF ON ON ON OFF 113 ON OFF OFF OFF ON ON ON O FF 114 OFF ON OFF OFF ON ON ON OFF 1 1 5 O NO N O F F O F F O NO NO N O[...]

C3412M-D (12/08) 15 141 ON OFF ON ON OFF OFF OFF ON 142 OFF ON ON ON OFF OFF OFF ON 1 4 3 O NO NO NO N O F F O F F O F F O N 144 OFF OFF OFF OFF ON OFF OFF ON 145 ON OFF OFF OFF ON OFF OFF ON 146 OFF ON OFF OFF ON OFF OFF ON 1 4 7 O N O NO F F O F FO NO F F O F FO N 148 OFF OFF ON OFF ON OFF OFF ON 149 ON OFF ON OFF ON OFF OFF ON 150 OFF ON ON OFF [...]

16 C3412M-D (12/08) 176 OFF OFF OFF OFF ON ON OFF ON 177 ON OFF OFF OFF ON ON OFF ON 178 OFF ON OFF OFF ON ON OFF ON 1 7 9 O N O NO F F O F FO N O NO F F O N 180 OFF OFF ON OFF ON ON OFF ON 181 ON OFF ON OFF ON ON OFF ON 182 OFF ON ON OFF ON ON OFF ON 183 ON ON ON OFF ON ON OFF ON 184 OFF OFF OFF ON ON ON OFF ON 185 ON OFF OFF ON ON ON OFF ON 186 O[...]

C3412M-D (12/08) 17 211 ON ON OFF OFF ON OFF ON ON 212 OFF OFF ON OFF ON OFF ON ON 213 ON OFF ON OFF ON OFF ON ON 214 OFF ON ON OFF ON OFF ON ON 215 ON ON ON OFF ON OFF ON ON 216 OFF OFF OFF ON ON OFF ON ON 217 ON OFF OFF ON ON OFF ON ON 218 OFF ON OFF ON ON OFF ON ON 219 ON ON OFF ON ON OFF ON ON 220 OFF OFF ON ON ON OFF ON ON 221 ON OFF ON ON ON [...]

18 C3412M-D (12/08) 246 OFF ON ON OFF ON ON ON ON 247 ON ON ON OFF ON ON ON ON 248 OFF OFF OFF ON ON ON ON ON 2 4 9 O N O F F O F F O NO NO NO NO N 250 OFF ON OFF ON ON ON ON ON 251 ON ON OFF ON ON ON ON ON 252 OFF OFF ON ON ON ON ON ON 253 ON OFF ON ON ON ON ON ON 254 OFF ON ON ON ON ON ON ON T able B. Switch Settings for SW1 D-T ype Control (Cont[...]

C3412M-D (12/08) 19 Getting Started Once installed, apply po wer to the Spectra IV/Spe ctra IV SE dome system. The system will start a config uration sequence. When config uration is done, th e following informat ion is displayed: Pelco Spectra IV/Spectra IV SE V e rsion X.XX D Address: 1 P Address: 2 Comm 2400, N, 8, 1 CONFIGURE DO NE This informa[...]

20 C3412M-D (12/08) How to Operate Y our Dome System Operation How to Control Pan and T ilt Move the joystick or pr ess t he direction keys le ft/right and up/down. Zoom Far T o zoom far: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the optical zoom limit. 2. Release the bu tton or j oystick fo r one seco nd. 3.[...]

C3412M-D (12/08) 21 QUICK PROGRAMMING GUIDE Access main menu (p rese t 95). Refe r to Accessing Main Me nu (Preset 95 ) on page 21. Use the joystick to position th e cursor beside menu selection . Note: If your controller does no t have a joystick, use the up or down key . Press Iris Open, the subme nu/cursor moves to the right. Move the joystick u[...]

22 C3412M-D (12/08) CM9500 1. Enter the number of th e Spectra IV/Spectra IV SE dome syste m and press the CAM key . The main menu appears. 2. Highlight SETUP in the main menu and press the SEL ECT key . 3. Highligh t CAM in the Setup menu an d press the SELECT key . 4. Highlight PRESET in the Camera menu and press the SEL ECT key . 5. Enter 95 and[...]

C3412M-D (12/08) 23 NET300/NET350/NET4001A 1. Check the Set box. 2. Click the preset 95 button. Th e main menu appears. ENDURA W ORKSTATION 1. Right-click in the video pane of the Spectra IV/Spectra IV SE dome system. 2. Click Preset and then click Select Preset. 3. Enter 95 and th en click OK. VCD5000 1. Enter 95 for th e preset action. The shor t[...]

24 C3412M-D (12/08) 16X LowLight Color Menu T ree OFF ENABLE P A SS WORD <EDIT P A SS WORD> PA SS WORD ALARM C ONT A C T ALARM S AUTO POWER UP A C TION POWER UP C ON S T ANT ALW AY S ON NO REPEA T A C K A C TION A C TIVA TE AUX < C URRENT READING> RE S ET ALERT ALERT* TEMPERA TURE DEWPOINT PRE S URE REFRE S H C URRENT READING GRA Y OFF [...]

C3412M-D (12/08) 25 EVENT01 ON 12:00 AM ON ON ON ON ON ON ON S KIP HOLIDA Y S PRE S ET EVENT LABEL EVENT A C TIVE EVENT TIME EVENT O CC UR S S UNDA Y MONDA Y TUE S DA Y WEDNE S DA Y THUR S DA Y FRIDA Y S A TURDAY HOLIDA Y EVENT TYPE EDIT EVENT ALL EVENT S NEW EVENT TYPE EVENT LABEL <EDIT EVENT LABEL> <EDIT EVENT> < C LEAR EVENT> &[...]

26 C3412M-D (12/08) 18X LowLight Day/Night Menu T ree OFF ENABLE P A SS WORD <EDIT P A SS WORD> PA SS WORD AUTO POWER UP A C TION POWER UP C ON S T ANT ALW AY S ON NO REPEA T A C K A C TION A C TIVA TE AUX < C URRENT READING> RE S ET ALERT ALERT* TEMPERA TURE DEWPOINT PRE S URE REFRE S H C URRENT READING GRA Y OFF OFF S TYLE BLANK ALL A[...]

C3412M-D (12/08) 27 EVENT01 ON 12:00 AM ON ON ON ON ON ON ON S KIP HOLIDA Y S PRE S ET EVENT LABEL EVENT A C TIVE EVENT TIME EVENT O CC UR S S UNDA Y MONDA Y TUE S DA Y WEDNE S DA Y THUR S DA Y FRIDA Y S A TURDAY HOLIDA Y EVENT TYPE EDIT EVENT ALL EVENT S NEW EVENT TYPE EVENT LABEL <EDIT EVENT LABEL> <EDIT EVENT> < C LEAR EVENT> &[...]

28 C3412M-D (12/08) 22X EXview LowLight Color Menu T ree OFF ENABLE P A SS WORD <EDIT P A SS WORD> PA SS WORD AUTO POWER UP A C TION POWER UP C ON S T ANT ALW AY S ON NO REPEA T A C K A C TION A C TIVA TE AUX < C URRENT READING> RE S ET ALERT ALERT* TEMPERA TURE DEWPOINT PRE S URE REFRE S H C URRENT READING GRA Y OFF OFF S TYLE BLANK AL[...]

C3412M-D (12/08) 29 EVENT01 ON 12:00 AM ON ON ON ON ON ON ON S KIP HOLIDA Y S PRE S ET EVENT LABEL EVENT A C TIVE EVENT TIME EVENT O CC UR S S UNDA Y MONDA Y TUE S DA Y WEDNE S DA Y THUR S DA Y FRIDA Y S A TURDAY HOLIDA Y EVENT TYPE EDIT EVENT ALL EVENT S NEW EVENT TYPE EVENT LABEL <EDIT EVENT LABEL> <EDIT EVENT> < C LEAR EVENT> &[...]

30 C3412M-D (12/08) 23X LowLight Day/Night Menu T ree OFF ENABLE P A SS WORD <EDIT P A SS WORD> PA SS WORD AUTO POWER UP A C TION POWER UP C ON S T ANT ALW AY S ON NO REPEA T A C K A C TION A C TIVA TE AUX < C URRENT READING> RE S ET ALERT ALERT* TEMPERA TURE DEWPOINT PRE S URE REFRE S H C URRENT READING GRA Y OFF OFF S TYLE BLANK ALL A[...]

C3412M-D (12/08) 31 EVENT01 ON 12:00 AM ON ON ON ON ON ON ON S KIP HOLIDA Y S PRE S ET EVENT LABEL EVENT A C TIVE EVENT TIME EVENT O CC UR S S UNDA Y MONDA Y TUE S DA Y WEDNE S DA Y THUR S DA Y FRIDA Y S A TURDAY HOLIDA Y EVENT TYPE EDIT EVENT ALL EVENT S NEW EVENT TYPE EVENT LABEL <EDIT EVENT LABEL> <EDIT EVENT> < C LEAR EVENT> &[...]

32 C3412M-D (12/08) 35X LowLight Day/Night Menu T ree OFF ENABLE P A SS WORD <EDIT P A SS WORD> PA SS WORD AUTO POWER UP A C TION POWER UP C ON S T ANT ALW AY S ON NO REPEA T A C K A C TION A C TIVA TE AUX < C URRENT READING> RE S ET ALERT ALERT* TEMPERA TURE DEWPOINT PRE S URE REFRE S H C URRENT READING GRA Y OFF OFF S TYLE BLANK ALL A[...]

C3412M-D (12/08) 33 EVENT01 ON 12:00 AM ON ON ON ON ON ON ON S KIP HOLIDA Y S PRE S ET EVENT LABEL EVENT A C TIVE EVENT TIME EVENT O CC UR S S UNDA Y MONDA Y TUE S DA Y WEDNE S DA Y THUR S DA Y FRIDA Y S A TURDAY HOLIDA Y EVENT TYPE EDIT EVENT ALL EVENT S NEW EVENT TYPE EVENT LABEL <EDIT EVENT LABEL> <EDIT EVENT> < C LEAR EVENT> &[...]

34 C3412M-D (12/08) Language The languag e for the on-screen me nus is sele ctable. Available languages in clude English , Spanish, French, German, Ita lian, Portuguese, Ru ssian, Polish, T urkish, and Czech. The fac tory default langua ge is English. T o ch ange the d isplay lang uage: 1. Use the joystick to position the cursor beside LANGUAGE. 2.[...]

C3412M-D (12/08) 35 System Information The System Inf ormation me nu displa ys the dome dr ive model, sof tware ver sion, avai lable memory , DIP switch information, and other diag nostic information. System settings canno t be changed using this menu; this informa tion is for refer ence only . Use the followin g steps to display the Sys tem Inform[...]

36 C3412M-D (12/08) Display Setup Display setup allows you to pr ogram how labels are displayed on the moni tor . The following labels are available: PRESET LABEL: Identifies preset. ZONE LABEL: Identifies zone. ZOOM: Identifies the am ount of magnification . AZIMUTH 1 /ELEVA TION 2 : A mount of pan fr om zero degr ees vertical an d the amount o f [...]

C3412M-D (12/08) 37 LABEL POSITIONS Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor scree n. The following lab els are not set at fixed positions: PRESET LABE L ZONE LABEL ALARM 1 ZOOM RA TIO - XXX.XX AZIMUTH 1 /ELEV A TION 2 - XXX°/-XX° DIRECTION - NE ALERT MESSAGE 3 * TITLE TEXT[...]

38 C3412M-D (12/08) Dome Settings CAMERA T YPE OF LIGHTING (Does not ap ply to 16X or 18X models. ) Pelco has calibrated settings tha t optimize the white balance and the p icture for several lighting conditions. Th ere are thre e settings: T1 (default): For use in outdoor applications. T2: For use in indo or applications. T3: (Available only wit h[...]

C3412M-D (12/08) 39 ZOOM LIMIT Zoom limit allo ws the user t o define a limitation on the amoun t of teleph oto zoom. The settings vary dependin g on camera mo del. 16X (Models DD4TC 16 and DD4TC16-X) The defaul t setting is 32X. Cameras wit h 128X zoom (16X optical zoom an d 8X digita l zoom) can be set for 16 X, 32X, 64X, or 128X. 18X (Models DD4[...]

40 C3412M-D (12/08) ZOOM SPEED Zoom speed allo ws the user to define how f ast the dome will go from full wide zoom to the 16X, 18X, 22X, 23X, or 35X optical zoom. Avai lable zoom speed se ttings for 16X models includ e: HIGH: 1.9 s econds MEDIUM (default): 3. 6 seconds LOW: 6.0 second s Avai lable zoom speed settin gs for 18X and 23X models includ[...]

C3412M-D (12/08) 41 IR CUT FILTER (Applies only to 18X, 23X, and 35X mo dels.) The 18X, 23X, and 35X camer as have two modes of operat ion: color , and black-white. Y ou can increase sensitivity in low light conditions by switching to black- white mod e (removing the IR cu t filter). Color mode is preferre d in norma l lighting conditions. The foll[...]

42 C3412M-D (12/08) ADVANCED CAMERA SETTINGS SHUTTER SPEED Shutter spee d is the duration of the electronic shutter . Program shutte r speed to operate automaticall y (Auto) or ma nually (Numer ic V alue). AUTO (default): The electronic shutter speed is set automatically by the amoun t of light sensed by the camera. NUMERIC V ALUE: Spec tra IV/Spec[...]

C3412M-D (12/08) 43 AUTO IRIS Auto iris is the lens function th at automatically opens and closes the ir is in response to chang ing light conditions. Program the a uto iris to operate au tomatically o r at a user-defined level. OFF: Auto iris is disabled, and control is always manual. AUTO (default): The iris is adjusted automatically to produce a[...]

44 C3412M-D (12/08) AUTO SHARPNESS Auto sharpness enhances pictu re detail by increasing the aper ture gain of the camera and sharpening the edges i n the pict ure. There are two settings : ON (default): The ca mera automatica lly maintains a normal shar pness mode. OFF: The sharpness of the pict ure is set manually by progr amming the sharpness le[...]

C3412M-D (12/08) 45 BACKLIGHT COMPENSATION (BLC) If a bright b acklight is present, t he subjects in the pict ure may appe ar dark or as a silho uette. Backlight compen sation enhances ob jects in the ce nter of th e picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source ou tside of this area, it wil [...]

46 C3412M-D (12/08) SENSOR SCAN MODE (Applies only to 35X models.) Sensor scan mo de controls the intern al proces sing of the camera's image sensor . Th e data scanned from the image senso r at each field time is used fo r the internal ima ge control algorith ms and digita l signal pr ocessing (D SP). Note: When changing fr om PROGRESSIVE to [...]

C3412M-D (12/08) 47 ELECTRONIC IMAGE STABILIZATION (Applies only to 35X models.) Electronic i mage stabi lization is a f eature of the camer a that can compensate f or some forms of external in fluences. In all case s, care shoul d be taken to make sure that any dome system is mounted to a rigid location . In the even t that vibr ation is in troduc[...]

48 C3412M-D (12/08) IMAGE ENHANCEMENT (Applies only to 35X models.) The image en hancement feature imp roves the d efinition of objects, lines, or te xt in high contrast areas, making them appe ar sharper . There are two imag e enhancement sett ings: DEFAUL T : Image enhancement is not activated. ENHANCED: Image enhancement is act ivated. LOW LUX N[...]

C3412M-D (12/08) 49 WIDE DYNAMIC RANGE (Applies only to 23X an d 35X models.) Wide dynamic ra nge (WDR) bal ances the br ightest an d darkest sections of a scene to p roduce a picture that is be tter balanced in lighting and provides more detail. Available setting s are OFF an d ON; the def ault sett ing is OFF . When wide dynamic ran ge is set t o[...]

50 C3412M-D (12/08) MOTION SETTINGS AUTO FLIP When the camera tilts do wnward and goes just beyo nd the vertical position , the dome rotates 180 degrees. Wh en the dome rotates (flips), the camera start s moving upward as long as you continue to hold the joyst ick in the down position. Once you le t go of th e joysti ck after the dome rotates, joys[...]

C3412M-D (12/08) 51 PARK T IME This feature allows t he dome to begin a spe cified operation (sca n, preset, or patte rn) after a programmed time of i nactivity. Park time can be programmed fr om 1–720 minutes (1 2 hours), or set to zero, which disables th is feature. The de fault setting is zero. Park Action This featur e will defi ne the acti v[...]

52 C3412M-D (12/08) SCAN SPEED Scan speed is the degrees per se cond that the dome will pan when in a scan mode. Scan speed i s adjustable fr om 1 to 40 degrees per secon d through the prog ramming menu. The def ault setting is 25 degrees per sec ond. PRESET FREEZE FRAME This feature freezes th e scene on the mon itor when going to a preset. This a[...]

C3412M-D (12/08) 53 LIMIT STOPS Limit stops are programmab le stops th at limit the pan r ange of th e dome. Ther e must be tw o limits, a left and a right, to de fine an area. There are two types of limit stops: MANUAL: A manual (j oystick) pan operation stops when a limit stop is reached. SCAN: The dome rev erses direct ion during random, frame ,[...]

54 C3412M-D (12/08) AZIMUTH ZERO Azimuth is the pan angle from zero to 359 degrees. Azimuth zero is the pan po sition you spe cify to be the zero de gree point. A zimuth zero i s normally set to magnetic north. Once set, azimuth and compass readings are base d on the set Azimuth Zero po int. T o program azimuth zero: 1. Use the joystick to position[...]

C3412M-D (12/08) 55 POWER UP POWER UP ACTION This setting defin es a specific ac tivity (scan, preset, pattern) to be perf ormed in the event the power to th e dome is cy cled. The following settings ar e available: NONE: No action. AUTO (default): The do me resume s its prior activity o r directi on before th e power outa ge. AUTO SCAN: Dome start[...]

56 C3412M-D (12/08) LINE SYNC Line sync refers to a programmab le function that allows you to synchronize all ca meras within a matrix system. Spectra IV and Spectr a IV SE dome systems aut omatically sense V-Sync input. N o line sync setup is required for Pelco c ontrol syste ms that pro vide a V-Sync signal. For matrix systems that do no t output[...]

C3412M-D (12/08) 57 PRESETS The model of t he back box you are using limits the number of prog rammable preset s that can be stored and retr ieved in the back box memor y . If you are usi ng an older model back bo x, you may pro gram and use up to the maximum nu mber of presets available to the dome drive. However , if the dome drive is changed, th[...]

58 C3412M-D (12/08) Note: For American Dyna mics controll ers with only 32 presets, switch SW2-1 on the dome drive to the ON position. When SW 2-1 is ON, preset 99 becomes 32 92 becomes 25 98 becomes 31 91 becomes 24 97 becomes 30 90 becomes 23 96 becomes 29 89 becomes 22 95 becomes 28 88 becomes 21 93 becomes 26 If the limit stops are turn ed off,[...]

C3412M-D (12/08) 59 4. Edit preset ca mera settings: a. Use the joystick to position the cursor be side EDIT CAMERA SETTINGS. b. Press Iris Open. The EDIT CA MERA SETTINGS window appe ars on the monitor . Refer to Camera on page 38 and Ad vanced Camera Settings on page 42 to change pr eset camera settings. c. T o edit the camera settings schedule, [...]

60 C3412M-D (12/08) ENABLE MOTION DETECTION (Applies only to 23X an d 35X models.) The following are the setting s for motion detection: OFF (default): Motion detectio n is tu rned off (disabled). ON: Motion detect ion is turned on (enabled ). Note: Motion detec tion does not work if the shutte r speed is se t at less th an 1/60 of a second. EDIT D[...]

C3412M-D (12/08) 61 Note: Motion detection is not g uaranteed to cat ch 100 percent of activit y . EDIT DETECTION AREAS DETECTION AREA 1 LOCA TION 0 SENSITIVITY MEDIUM DETECTION AREA 2 LOCA TION 0 SENSITIVITY MEDIUM DETECTION AREA 3 LOCA TION 0 SENSITIVITY MEDIUM DETECTION AREA 4 LOCA TION 0 SENSITIVITY MEDIUM BACK EXIT MOTION DETECTION AREAS[...]

62 C3412M-D (12/08) ACTIVATE AUX COMMAND (Applies only to 23X an d 35X models.) Motion det ection can b e programmed to trigger an auxiliar y command when mo tion is de tected. The following are the setting s for ACTIV A TE AUX: OFF (default): Motion detectio n will not trigger an AUX command . 1: T riggers a command to AUX 1. 2: T riggers a comman[...]

C3412M-D (12/08) 63 PATTERNS A pattern is a memorized, repea ting series of pan, tilt , zoom, and pr eset funct ions that ca n be recalled with a command from a con troller or au tomatically by a progra mmed function (alarm, park, event, or power -up). Both 16X and 18 X models have one user -defined pa ttern available. The 22X, 23 X, and 35X models[...]

64 C3412M-D (12/08) ZONES A zone is a pa n area, d efined by a left and ri ght limit, on the 36 0-degree p an plane. The Spectra IV and Spectra IV SE dome systems are capable of ei ght zone s, each with a 20-c ha racter label. T o program a zone: 1. Use the joystick to position the cursor be side ZONE NUMBER. Pr ess Iris Open, and the cursor moves [...]

C3412M-D (12/08) 65 WINDOW BLANKING Window blanking allows a us er to prog ram four-sided areas that ca nnot be v iewed by the operator of the dome system. A blank ed area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto an d wide. The 16X and 18X models ha ve one user-defined wind ow blank av ailab[...]

66 C3412M-D (12/08) 6. The bla nked area c an be progr ammed to t urn on or o ff at a spe cified zoom point. T o set the zoom point: a. Use the joystick to position the cursor be side EDIT WINDOW ZOOM, and th en press Iris Open. b. Zoom in to the point where you wan t window blanking to turn on. Press Iris Open to set the zoom point. Notes: • Sin[...]

C3412M-D (12/08) 67 BLANK ALL ABOVE/BLANK ALL BELOW The Blank A ll Above an d Blank All Be low options add additio nal flexib ility to s etting up pri vacy areas . These sett ings are ideal for applications where a comple te pan location needs to be blanked. T able C. Window Blank Settings Figure 3. Window Blank T ilt Angles Blank All Above Blank A[...]

68 C3412M-D (12/08) ALARMS The Spectra IV SE dome systems have seven alarm inputs that can be programmed as high, medium, or low priority . When an alarm is receive d , an input signal to the do me triggers the user - defined action (go to pres et, run pattern, etc.) programmed fo r the alarm. Note: Refer to the notatio n in step 6 for the limited [...]

C3412M-D (12/08) 69 3. Select the alarm pr iority: a. Use the jo ystick to po sition the cu rsor bes ide ALARM PRIO RITY . b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or do wn t o view the available selections. Available settings include HIGH, MEDIUM, and LO W (default). If multiple alarms with different priorities ar[...]

70 C3412M-D (12/08) 5. Set the auxiliary to activate: a. Use the joystick to position the cursor be side ACTIV A TE AUX. b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the followi ng available selections. NO (default): Not activated. 1: An alarm action will close AUX 1. 2: An alarm action will close AUX 2[...]

C3412M-D (12/08) 71 AUX Note: If a 16X or 18X model do me drive is install ed in a Spectra II I SE or Spectr a IV SE back box, the auxiliary feature is f unctional and ava ilable. If a 16X or 1 8X model is installed in a stan dard Spectra III o r Spectra IV back box, the auxil iary feature is not ava ilable. An auxiliary outp ut is a programmab le [...]

72 C3412M-D (12/08) T ITLE T EXT T itle text is the label used to id e ntify the c amera viewed on the moni tor . Up to 20 characte rs can be used for a title. T o edit the title text label, do the following: 1. Use the joystic k to positi on the cursor beside EDIT TITLE TEXT . 2. Press Iris Op en. The fol lowing appe ars on the monitor: 3. Use the[...]

C3412M-D (12/08) 73 ALERT Note: The Alert opt ion applies only to Pres surized Spect ra IV dome syste ms. Spectra IV systems that are not pr essurized will not display this menu item. Sensors strate gically pla ced inside t he pressurized dome system c ontinually monit or pressur e, temperature, and dew po int. If in ternal cond itions reach unacce[...]

74 C3412M-D (12/08) ACK ACTION Set ACK ACTION to prog ram the frequency at which an aler t message is displayed after the ale rt condition h as been ackno wledged. T he following settings a re available : AL WA YS O N: The alert me ssage is displayed until a lert conditions ar e cleared. OFF 8 HRS: The alert message is turne d off for 8 hours. Mess[...]

C3412M-D (12/08) 75 CLEAR Use this setting to cle ar user -defined settings or ret urn the dome to fact ory default settings. The following are the available set tings: ALL ZONES: Clears all zones. T o clear a single zone, refer to Zones on page 64. ALL PRESETS: Clears all pre sets. T o clear a single pr eset, refe r to Pre sets on page 57. ALL P A[...]

76 C3412M-D (12/08) PASSWORD Spectra IV and Spectra IV SE fe ature passwor d protecti on to prev ent unauth orized change s to the dome settings. An operator ca n open the System Inform ation and Display Setup me nus, but cannot access any of th e dome sett ings menus. Controller/keyb oard commands ca nnot overr ide pa ssword-protected settin gs. I[...]

C3412M-D (12/08) 77 CLOCK The clock is used to program the curr ent date an d time. Th e date and time set in the Clock me nu is used to program even ts. The date and time can a lso be displayed on the monitor whe n the menus are not being accessed. T o p rogram the c lock, do th e followin g: 1. Use the joystick to posit ion the cursor beside TIME[...]

78 C3412M-D (12/08) 7. If FIXED DA TE was selected, the following appears on the mon itor: a. Use the joystick to position th e cursor beside TIME SHIF T . Pres s Iris Open. Scroll throug h the options until t he desired selection appe ars. Press Iris Open to select the time sh ift. b. Use the joystick to posit ion the cursor beside the start date [...]

C3412M-D (12/08) 79 8. If RELA TIVE DA TE was selected , the following appears on the monitor : Follow the instructions in step 7 for FIXED DA TE, adding WEEK. CLOCK TIME BASE INTERNAL CLOCK TIME FORMA T 12 HOUR SET TIME 00:00 AM DA TE FORMA T MM/DD/YYYY SET DA TE 00/00/0000 DA YLIGHT SAVINGS RELATIVE DA TE TIME SHIFT 1 HOUR ST ART DA TE MONTH APRI[...]

80 C3412M-D (12/08) EVENT An event is a preprogrammed c amera, park, scan, preset , pattern, window blanking , alarm, or auxiliary fu nction th at can be p erformed automatica lly at a spec ific date an d time. For exampl e, suppose a camera is se t to run in a continuo us patter n that scan s a parking lot during business hour s Monday through Fri[...]

C3412M-D (12/08) 81 EVENT T YPE Any of the available event typ es can be selected from th is menu, or you may select ALL EVENTS to manage t he events as a grou p.The follo wing are the settin gs for ev ent type: SCAN: A scan even t executes a sp ecified scan (random, aut o, or frame scan) using the li mit stops and scan speed define d in the Motion[...]

82 C3412M-D (12/08) EVENT LABEL Set the event label to NEW to create a new event. Use the following steps to manage an existing event . 1. Use the joystick to position the cursor be side EVENT LABEL. Pr ess Iris Open. 2. Move the joystick up or down to sc roll throug h the eve nts. Press Ir is Open to e nter select ion. As you scroll through the ev[...]

C3412M-D (12/08) 83 EDIT EVENT Use the fol lowing steps t o edit an e vent. 1. Use the joystick to position the cursor be side EDIT EVENT . 2. Press I ris Open. The following ap pears on the monitor : a. Use the joystick to position the cursor be side EVENT ACTIVE. Press Iris Open. Scroll to select NO to leave the event inac tive or YE S to activat[...]

84 C3412M-D (12/08) CLEAR EVENT T o cl ear an ev ent: 1. Use the joystick to position the cursor be side CLEAR EVENT . 2. Press I ris Open. 3. Follow the directions displayed on the monitor . LIST EVENT T o li st even ts: 1. Use the joystick to position the cursor be side LIST EVENT . 2. Press I ris Open. 3. All programmed even ts will be listed. H[...]

C3412M-D (12/08) 85 EDIT HOLIDAY Use the following step s to edit a holiday: 1. Use the joystick to position the cursor be side EDIT EVENT LABEL. 2. Press I ris Open. 3. Use the joystick to position the cursor besi de OCCURRENCE. Press Ir is Open. The following are the settings for Occurrence: FIXED DA TE: The holi day occurs o n the same da te eac[...]

86 C3412M-D (12/08) CLEAR HOLIDAY T o clear a holiday: 1. Use the joystick to position the cursor be side CLEAR HOLIDA Y . 2. Press I ris Open. 3. Follow the directions displayed on the monitor . LIST HOLIDAYS T o li st even ts: 1. Use the joystick to position th e cursor beside LIST HOLIDA YS. 2. Press I ris Open. 3. All programmed holi days will [...]

C3412M-D (12/08) 87 SCHEDULED EVENTS Use this page to r ecord scheduled events. ___________________________________ _________________________________________________ ___ ___________________________________ _________________________________________________ ___ ___________________________________ _________________________________________________ ___ [...]

88 C3412M-D (12/08) Reset, Cycle Power , Reboot RESET CAMERA Use this function to reset all camera se ttings to factory defau lt parameters. CYCLE CAMERA POWER If the camera is not operatin g or if you lose ca mera control, cycle camera power . Cycling camera power resets t he camera bu t does no t change an y saved came ra settings . REBOOT SYSTEM[...]

C3412M-D (12/08) 89 Software/Language File Upload The RJ-45 data po rt of the dome drive allows access for on-site setup, testing, and u ploading of revised operat ing software an d language files. A Pe lco field s ervice tool i s re quired to perfor m these oper ations. Field service too ls include Pelco’ s remote monitor kit (IPS-RMK), remo te [...]

90 C3412M-D (12/08) Suggested Preventative Maintenance The Spectra IV and Spectr a IV SE dome systems do not require any special maintena nce. Occasionally , dust may build up on the inside or the out side of the dome. If this occurs, turn power off to the unit and remove the l ower dome fro m the back bo x. Remove the d ust from the lower do me us[...]

C3412M-D (12/08) 91 Specifications 16X MODELS DD4TC16 Signal Format NTSC Scanning Syste m 2:1 Interlace Image Sensor 1/4-inch interline tr ansfer CCD Effective Pixels 768 (H) X 494 (V) Horizontal Res olution >470 TV lines Lens f/1.4 (focal length, 4~64 mm; 16X optical zoom, 8X digital zoom) Zoom Speed (opt ical range) 1.9/3.6/6.0 seconds Horizon[...]

92 C3412M-D (12/08) 18X MODELS DD4CBW18 Signal Format NTSC Scanning Syste m 2:1 Interla ce Image Sensor 1/4-inch progre ssive scan CCD Effective Pixels 768 (H) X 494 (V) Horizontal Res olution 540 TV line s Lens f/1.6 (focal length, 3.8~6 8.4 mm; 18X optical zoom, 12X digital zoo m) Zoom Speed (opt ical range) 2.9/4.2/5.8 se conds Horizontal Angle [...]

C3412M-D (12/08) 93 22X MODELS DD4C22 Signal Format NTSC Scanning Syste m 2:1 Interlace Image Sensor 1/4-inch CCD Effective Pixels 768 (H) X 494 (V) Horizontal Res olution >470 TV lines Lens f/1.6 (focal length, 4~88 mm; 22X optical zoom, 12X digital zoom) Zoom Speed (opt ical range) 2.4/3.9/6.3 seconds Horizontal Angle of V iew 47° at 4 mm wid[...]

94 C3412M-D (12/08) 23X MODELS DD4CBW23 Signal Format NTSC Scanning Syste m 2:1 Interlace Image Sensor 1/4-inch pro gressive scan CCD Effective Pixels 768 (H) X 494 (V) Horizontal Res olution 540 TV line s Lens f/1.6 (focal length, 3.6~8 2.8 mm; 23X optical zoom, 12X digital zoo m) Zoom Speed (opt ical range) 2.9/4.2/5.8 seconds Horizontal Angl e o[...]

C3412M-D (12/08) 95 DD4CBW23-X Signal Format P A L Scanning Syste m 2:1 Interlace Image Sensor 1/4-inch pro gressive scan CCD Effective Pixels 752 (H) X 582 (V) Horizontal Res olution 540 TV line s Lens f/1.6 (focal length, 3.6~8 2.8 mm; 23X optical zoom, 12X digital zoo m) Zoom Speed 2.9/4.2/5.8 secon ds Horizontal Angl e of View 54 ° at 3.6 mm w[...]

96 C3412M-D (12/08) 35X MODELS DD4CBW35 Signal Format NTSC Scanning Syste m 2:1 Interlace/1: 1 Progres sive (user -selectable) Image Sensor 1/4-inch CCD Effective Pixels 768 (H) X 494 (V) Horizontal Res olution >540 TV lines Lens f/1.4 (f ocal length , 3.4~119 mm; 35X optical zo om, 12X digita l zoom) Zoom Speed (opt ical range) 3.2/4.6/6.6 seco[...]

C3412M-D (12/08) 97 DD4CBW35-X Signal Format P A L Scanning Syste m 2:1 Interlace/1: 1 Progres sive (user -selectable) Image Sensor 1/4-inch CCD Effective Pixels 752 (H) X 582 (V) Horizontal Res olution >540 TV lines Lens f/1.4 (f ocal length , 3.4~119 mm; 35X optical zo om, 12X digita l zoom) Zoom Speed 3.2/4.6/6.6 secon ds Horizontal Angle of [...]

[...]

PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, w ithout ch arge, any mer chandise pr oved defe ctive in material or workmanshi p for a period of one year after the date of shipment. Exceptions to this warranty are a s noted below: • Five years: – Fiber optic products – TW3000 Ser ies unshielded twist ed pair [...]

Pelco, Inc. W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 29 2-1981 Fax +1 (559) 348-1120 www .pelco.com[...]