Pelco DD53CBW-X manuale d’uso

Spectra III ™ SE Series C2445M-E (11/05) OPERA TION/PROGRAMMING Models DD53CBW & DD53CBW -X C2445M-E.pmd 12/14/05, 8:45 AM 1[...]

C2445M-E.pmd 12/14/05, 8:45 AM 2[...]

OPERA TION/PROGRAMMING MANUAL MODELS DD53CBW & DD53CBW -X 23X COLOR/BLACK AND WHITE C2445M-E.pmd 12/14/05, 8:45 AM 3[...]

4 C2445M-E (11/05) C2445M-E.pmd 12/14/05, 8:45 AM 4[...]

C2445M-E (11/05) 5 CONTENTS WELCOME ................................................................................................................................................................................................ 7 GETTING ST ARTED ......................................................................................................[...]

6 C2445M-E (11/05) POWER UP ....................................................................................................................... ............................................................... 30 POWER UP ACTION ................................................................................................................ ......[...]

C2445M-E (11/05) 7 WELCOME Thank you for purchasing Pelco’ s premier integrated dome system, Spectra III SE. Y our new system features a high resolution, color/black-white camera/optics package with IR filter and programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Insi[...]

8 C2445M-E (11/05) HOW TO OPERA TE YOUR DOME SYSTEM Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far T o zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit . 2. Release the button or joystick for one second[...]

C2445M-E (11/05) 9 Accessing Main Menu (Preset 95) Y ou can call up the main menu on your monitor by pr ogramming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for va[...]

10 C2445M-E (11/05) KBD4000/KBD4002 1. Press the SPOT MONITOR key . 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key . 2. Position the asterisk in the YES row and press the F1 key . The main menu appears. Extended Co[...]

C2445M-E (11/05) 11 QUICK ST ART GUIDE – SYSTEM SETUP Quick Programming Guide Access main menu (preset 95). See the Accessing Main Menu (Preset 95) section. Use the joystick* to position the cursor beside menu selection. Press Iris Open, the submenu/cursor moves to the right. Move the joystick up or down to view selections. Press Iris Open to mak[...]

12 C2445M-E (11/05) C2445M-E.pmd 12/14/05, 8:45 AM 12[...]

C2445M-E (11/05) 13 LANGUAGE The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, T urkish, and Czechoslovakian. The factory default language is English. NOTE: The dome system cannot store all 10 languages in its memory . There are two language packag[...]

14 C2445M-E (11/05) SYSTEM INFORMA TION The system Information screen displays dome drive model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only . Use the following steps to display the System Information screen: 1. Use the joystick to posi[...]

C2445M-E (11/05) 15 DISPLA Y SETUP Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ZOOM RA TIO Identifies the amount of magnification. AZIMUTH 1 /ELEV A TION 2 Amount of pan from 0 ° and the amount of tilt from 0 ° horizon[...]

16 C2445M-E (11/05) Label Position Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ALARM 1 ZOOM RA TIO - XXX.XX AZIMUTH 1 /ELEV A TION 2 - XXX ° /-XX ° DIRECTION - NE ALERT MESSAGE 3 * TITLE TEXT [...]

C2445M-E (11/05) 17 BACK EXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X184 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 IR CUT FIL TER AUTO AUTO IR LEVEL DUSK <ADVANCED SETTINGS> CAMERA <CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <P ATTERNS> <ZONES> <WINDOW BLANKING> <ALARMS> <A[...]

18 C2445M-E (11/05) ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 184X. Cameras with 230X zoom (23X optical zoom and 10X digital zoom) can be set for 23X, 32X, 92X, 184X, or 230X. ZOOM SPEED Zoom Speed allows the user to define how fast the dome will go from full wide zoom to th[...]

C2445M-E (11/05) 19 IR CUT FIL TER Spectra III SE has two modes of operation: color , and black and white. Y ou can increase sensitivity in low light conditions by switching to black and white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions. The following are the settings for the IR cut filter: OFF Manual op[...]

20 C2445M-E (11/05) BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AUTO AGC LIMIT 28 AUTO IRIS AUTO AUTO IRIS LEVEL 66 AUTO IRIS PEAK 8 AUTO SHARPNESS ON SHARPNESS LEVEL 26 AUTO WHITE BALANCE ON R GAIN 482 B GAIN 678 BACKLIGHT COMP OFF VIDEO LEVEL HIGH WIDE DYNAMIC RANGE OFF BACK EXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X184 ZOOM SPEED MED[...]

C2445M-E (11/05) 21 AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level. OFF Auto iris is disabled, and control is always manual. AUTO (default) The iris is adjusted automatically to produce a consta[...]

22 C2445M-E (11/05) AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode. OFF The sharpness of the picture is set manually by programming the SHARPNESS LEVEL. Sharpne[...]

C2445M-E (11/05) 23 BACKLIGHT COMPENSA TION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out[...]

24 C2445M-E (11/05) Wide Dynamic Range ON Wide Dynamic Range OFF VIDEO LEVEL Set the video output to one of the following: NORMAL 1.0 volt peak-to-peak HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable. WIDE DYNAMIC RANGE The Wide Dynamic Range (WDR) setting balances the brightest and darkest sections of a scene t[...]

C2445M-E (11/05) 25 Motion Settings AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick cont[...]

26 C2445M-E (11/05) PARK TIME This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. Park Action This feature will define the activity [...]

C2445M-E (11/05) 27 SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. PRESET FREEZE FRAME This feature freezes the scene on the monitor when going to a preset. This allows for[...]

28 C2445M-E (11/05) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. There are two types of limit stops: MANUAL A manual (joystick) pan operation stops when a limit stop is reached. SCAN The dome reverses direction during random, frame, or auto scan[...]

C2445M-E (11/05) 29 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. T o program azimuth zero: 1. Use the joystick to position the cursor beside[...]

30 C2445M-E (11/05) Power Up POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE No action. AUTO (default) The dome resumes its prior activity or direction before the power outage. AUTO SCAN Dome starts auto scan ope[...]

C2445M-E (11/05) 31 Line Sync Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: Spectra III SE automatically senses V-sync input. No line sync setup is required for Pelco control systems that provide a V-sync signal. For matrix systems that do not output V-sync, there are two settin[...]

32 C2445M-E (11/05) Presets The Spectra III SE dome system has 150 preset positions. Each of the user -definable presets can be programmed to use pan, tilt, camera settings, and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150. The following presets are predefined for specific functions: Preset Action 33 Flip command[...]

C2445M-E (11/05) 33 3. Edit the preset scene: a. Use the joystick to position the cursor beside EDIT PRESET SCENE. b. Press Iris Open. c. Follow the directions displayed on the monitor . 4. Edit preset camera settings: a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS. b. Press Iris Open. The EDIT CAMERA SETTINGS window appears[...]

34 C2445M-E (11/05) ENABLE MOTION DETECTION The following are the settings for MOTION DETECTION ENABLED: OFF (default) Motion detection is turned off (disabled). ON Motion detection is turned on (enabled). NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second. EDIT DETECTION AREAS Four motion detection areas[...]

C2445M-E (11/05) 35 NOTE: Motion detection is not guaranteed to catch 100% of activity . ACTIV A TE AUX COMMAND Motion detection can be programmed to trigger an auxiliary command when motion is detected. The following are the settings for ACTIV A TE AUX: OFF (default) Motion detection will not trigger an AUX command. 1 T riggers a command to AUX 1.[...]

36 C2445M-E (11/05) Patterns A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up). The Spectra III SE can handle up to four user -defined patterns. Pattern length is based upon memory usage rather[...]

C2445M-E (11/05) 37 Zones A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra dome system is capable of eight zones, each with a 20-character label. T o program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves to the right. 2. Move the joystick up o[...]

38 C2445M-E (11/05) Window Blanking Window blanking allows a user to program up to eight, four -sided, user-defined areas that cannot be viewed by the operator of the dome system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide. Spectra III SE has two style modes for window [...]

C2445M-E (11/05) 39 6. The blanked area can be programmed to turn on or off at a specified zoom point. T o set the zoom point: a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press Iris Open. b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to set the zoom point. NOTE: Since the area is[...]

40 C2445M-E (11/05) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the blanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have been set for window blanking are cleared. BLANK ALL[...]

C2445M-E (11/05) 41 Alarms The Spectra III SE dome has seven alarm inputs, which can be programmed as high, medium or low priority . When an alarm is received, an input signal to the dome triggers the user -defined action (go to preset, run pattern, etc.) programmed for the alarm. There are three global alarm settings: RESUME This mode lets the dom[...]

42 C2445M-E (11/05) 3. Select the alarm priority: a. Use the joystick to position the cursor beside ALARM PRIORITY . b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the available selections. Available settings include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active [...]

C2445M-E (11/05) 43 5. Set the auxiliary to activate: a. Use the joystick to position the cursor beside ACTIV A TE AUX. b. Press Iris Open. The cursor moves to the right. c. Move the joystick up or down to view the following available selections. NO (default) Not activated. 1 An alarm action will close AUX 1. 2 An alarm action will close AUX 2. d. [...]

44 C2445M-E (11/05) Aux An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate. An auxiliary output is programmable to trigger from an alarm or from a controller . An AUX 1 command from the controller will activate the relay in the dome and operate the device that is connected to the relay . T[...]

C2445M-E (11/05) 45 T itle T ext T itle text is the label used to identify the camera viewed on the monitor . Up to 20 characters can be used for a title. T o edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT . 2. Press Iris Open. The following appears on the monitor: EXIT SPECTRA III LAN[...]

46 C2445M-E (11/05) Alert NOTE: The Alert section only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher . Spectra III SE systems that are not pressurized or pressurized systems that do not have dome drive software version 1.25 or higher will not display this menu item. Software version 1.25 or higher includes [...]

C2445M-E (11/05) 47 ACK ACTION Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION: AL WA YS ON The alert label is displayed until alert conditions are cleared. OFF 8 HRS The alert label is turned off for 8 hours. Label returns after 8 hours if the[...]

48 C2445M-E (11/05) Clear Use this setting to clear user -defined settings or return the dome to factory default settings. The following are the available CLEAR settings: ALL ZONES Clears all zones. T o clear a single zone, refer to the Zones section. ALL PRESETS Clears all presets. T o clear a single preset, refer to the Presets section. ALL P A T[...]

C2445M-E (11/05) 49 Password Spectra III SE features password protection to prevent unauthorized changes to the dome settings. An operator can open the System Information and Display Setup Screens, but cannot access any of the Dome Settings menus. Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set[...]

50 C2445M-E (11/05) EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM RESET , CYCLE POWER, REBOOT RESET CAMERA Use this function to reset all camera settings to factory default parameters. CYCLE CAMERA POWER If the camera is not operati[...]

C2445M-E (11/05) 51 SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’ s remote monitor kit (IPS-RMK), remote data port bo[...]

52 C2445M-E (11/05) SPECIFICA TIONS DD53CBW Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch CCD Effective Pixels 724 (H) X 494 (V) Horizontal Resolution >470 TV lines Lens F1.6 (f=3.6~82.8 mm optical, 23X optical zoom, 10X digital zoom) Zoom Speed (optical range) 2.9/4.2/5.8 seconds Horizontal Angle of View 54 ° at 3.6 mm[...]

C2445M-E (11/05) 53 Pelco, the Pelco logo, and Genex are registered trademarks of Pelco. © Copyright 2005, Pelco. Spectra III and PelcoNet are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C2445M 2/02 Original version. C2445M-A 11/02 Revised Quick Start Guide. C2445M-B 2/03 Manual revised to include features of [...]

C2445M-E.pmd 12/14/05, 8:45 AM 54[...]

C2445M-E.pmd 12/14/05, 8:45 AM 55[...]

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ® C2445M-E.pmd 12/14/05, 8:45 AM 5[...]