Pelco DD53TC16-X manuale d’uso

Spectra III ™ Series C2446M-E (11/05) ® OPERA TION/PROGRAMMING Models DD53TC16 & DD53TC16-X[...]

[...]

OPERA TION/PROGRAMMING MANUAL MODELS DD53TC16 & DD53TC16-X 16X LowLight ™ COLOR TECHNOLOGY[...]

4 C2446M-E (11/05)[...]

C2446M-E (11/05) 5 CONTENTS WELCOME ................................................................................................................................................................................................. 7 GETTING ST ARTED .....................................................................................................[...]

6 C2446M-E (11/05) POWER UP ....................................................................................................................... ............................................................... 26 POWER UP ACTION ................................................................................................................ ......[...]

C2446M-E (11/05) 7 WELCOME Thank you for purchasing Pelco’ s premier integrated dome system, Spectra III. Y our new system features a high resolution, color camera/optics package with LowLight ™ technology and programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Insid[...]

8 C2446M-E (11/05) HOW TO OPERA TE YOUR DOME SYSTEM Operation How to Control Pan and T ilt Move joystick or press the direction keys left/right and up/down. Zoom Far T o zoom far , do the following: 1. Press the Zoom T ele button or turn the joystick clockwise until zoom stops at the 32X zoom limit . 2. Release the button or joystick for one second[...]

C2446M-E (11/05) 9 Accessing Main Menu (Preset 95) Y ou can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’ s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for var[...]

10 C2446M-E (11/05) KBD4000/KBD4002 1. Press the SPOT MONITOR key . 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key . 2. Press the F1 key , the main menu appears on the screen. Extended Coaxitron or RS-485 Mode 1. E[...]

C2446M-E (1 1 /05) 11 QUICK ST ART GUIDE – SYSTEM SETUP Presets The following presets are reserved for special functions. Preset Function 33 Flip command 34 Pan zero command 83-89 Reserved 90-91 Manual limit stops 92-93 Scan limit stops 94 Reserved 95 Select main programming menu 96 Stop a scan 97 Random scanning 98 Frame scanning 99 Start auto s[...]

12 C2446M-E (11/05)[...]

C2446M-E (11/05) 13 LANGUAGE The language for the on-screen menus is selectable. Available languages include English, Spanish, French, German, Italian, Portuguese, Russian, Polish, T urkish, and Czechoslovakian. The factory default language is English. NOTE: The dome system cannot store all 10 languages in its memory . There are two language packag[...]

14 C2446M-E (11/05) SYSTEM INFORMA TION The system Information screen displays dome drive model, software version, available memory , and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only . Use the following steps to display the System Information screen: 1. Use the joystick to posi[...]

C2446M-E (11/05) 15 DISPLA Y SETUP Display setup allows you to program how labels are displayed on the monitor . The following labels are available: PRESET LABEL - Identifies preset. ZONE LABEL - Identifies zone. ZOOM RA TIO - Identifies the amount of magnification. AZIMUTH 1 /ELEV A TION 2 - Amount of pan from 0 ° and the amount of tilt from 0 °[...]

16 C2446M-E (11/05) Label Position Labels can be placed anywhere on the monitor . This feature allows you to customize the appearance of your monitor screen. The following labels are not set at fixed positions: PRESET LABEL ZONE LABEL ZOOM RA TIO - XXX.XX AZIMUTH 1 /ELEV A TION 2 - XXX ° /-XX ° DIRECTION - NE ALERT MESSAGE 3 * TITLE TEXT T o set [...]

C2446M-E (11/05) 17 BACK EXIT AUTO FOCUS ON ZOOM LIMIT X128 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> CAMERA DOME SETTINGS Camera AUTO FOCUS Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two auto focus settings: ON (default) If auto focus mode is set to ON, the camera wil[...]

18 C2446M-E (11/05) BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AUTO AGC LIMIT 25 AUTO IRIS AUTO AUTO IRIS LEVEL 66 AUTO IRIS PEAK 8 AUTO SHARPNESS ON SHARPNESS LEVEL 26 AUTO WHITE BALANCE ON R GAIN 482 B GAIN 678 BACKLIGHT COMP OFF VIDEO LEVEL HIGH BACK EXIT AUTO FOCUS ON ZOOM LIMIT X128 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> [...]

C2446M-E (11/05) 19 AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. Program the auto iris to operate automatically or at a user -defined level. OFF Auto iris is disabled, and control is always manual. AUTO (default) The iris is adjusted automatically to produce a consta[...]

20 C2446M-E (11/05) AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. There are two settings: ON (default) The camera automatically maintains a normal sharpness mode. OFF The sharpness of the picture is set manually by programming the SHARPNESS LEVEL. Sharpne[...]

C2446M-E (11/05) 21 BACKLIGHT COMPENSA TION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out[...]

22 C2446M-E (11/05) Motion Settings AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates 180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the joystick after the dome rotates, joystick cont[...]

C2446M-E (11/05) 23 PARK TIME This feature allows the dome to go to preset 1 after a programmed time of inactivity . Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables this feature. The default setting is zero. Park Action This feature will define the activity when the dome parks. The following setti[...]

24 C2446M-E (11/05) SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed is adjustable from 1 to 40 degrees per second through the programming menu. The default setting is 25 degrees per second. LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be two li[...]

C2446M-E (11/05) 25 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. T o program azimuth zero: 1. Use the joystick to position the cursor beside[...]

26 C2446M-E (11/05) Power Up POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled. The following settings are available: NONE No action. AUTO SCAN Dome starts auto scan operation. RANDOM SCAN Dome starts random scan operation. FRAME SCAN Dome starts frame scan [...]

C2446M-E (11/05) 27 Line Sync Line sync refers to a programmable function that allows you to synchronize all cameras within a matrix system. NOTE: Spectra III automatically senses V-sync input. No line sync setup is r equired for Pelco control systems that provide a V-sync signal. For matrix systems that do not output V-sync, there ar e two setting[...]

28 C2446M-E (11/05) Presets The Spectra III dome system has 99 preset positions. Each of the user -definable presets can be programmed to use pan, tilt, camera settings, and motion detection. The programmable presets are numbered 1-32 and 35-82. The following presets are predefined for specific functions: Preset Action 33 Flip command. Pans the dom[...]

C2446M-E (11/05) 29 Patterns A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be recalled with a command from a controller or automatically by a programmed function (alarm, park or power -up). The Spectra III can handle one user -defined pattern. Pattern length is based upon memory usage rather than a fix[...]

30 C2446M-E (11/05) Zones A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra dome system is capable of eight zones, each with a 20-character label. T o program a zone: 1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves to the right. 2. Move the joystick up o[...]

C2446M-E (11/05) 31 (See page 11) Quick Programming Guide T itle T ext T itle text is the label used to identify the camera viewed on the monitor . Up to 20 characters can be used for a title. T o edit the title text label, do the following: 1. Use the joystick to position the cursor beside EDIT TITLE TEXT . 2. Press Iris Open. The following appear[...]

32 C2446M-E (11/05) Alert NOTE: The Alert section only applies to Pressurized Spectra III dome systems with software version 1.25 or higher . Spectra III systems that are not pressurized or pressurized systems that do not have dome drive software version 1.25 or higher will not display this menu item. Software version 1.25 or higher includes the so[...]

C2446M-E (11/05) 33 ACK ACTION Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION: AL WA YS ON The alert label is displayed until alert conditions are cleared. OFF 8 HRS The alert label is turned off for 8 hours. Label returns after 8 hours if the[...]

34 C2446M-E (11/05) BACK EXIT CLEAR RESTORE FACTORY DEF AUL TS EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM <CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <P ATTERNS> <ZONES> <TITLE [...]

C2446M-E (11/05) 35 BACK EXIT ENABLE P ASSWORD OFF <EDIT P ASSWORD> P ASSWORD EDIT THE P ASSWORD ---------- 1234567890 OK ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZ.,-/ SP ACE abcdefghij BACKSP ACE klmnopqrst uvwxyz#&:* EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAM[...]

36 C2446M-E (11/05) EXIT SPECTRA III LANGUAGE ENGLISH <SYSTEM INFORMA TION> <DISPLA Y SETUP> <DOME SETTINGS> ACK ALERT* RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM *This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher . RESET , CYCLE POWER, REBOOT RESET CAMERA Use this function t[...]

C2446M-E (11/05) 37 SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’ s remote monitor kit (IPS-RMK), remote data port bo[...]

38 C2446M-E (11/05) SPECIFICA TIONS DD53TC16 Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch interline transfer CCD Effective Pixels 768 (H) X 494 (V) Horizontal Resolution >470 TV lines Lens F1.4 (f=4~64 mm optical, 16X optical zoom, 8X digital zoom) Zoom Speed (optical range) 1.9/3.6/6.0 seconds Horizontal Angle of View [...]

C2446M-E (11/05) 39 ® Pelco, the Pelco logo, and Genex are registered trademarks of Pelco. © Copyright 2005, Pelco. ™ Spectra III and LowLight are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C2446M 2/02 Original version. C2446M-A 4/02 Software revised. C2446M-B 11/02 Revised Quick Start Guide. C2446M-C 2/03[...]

[...]

[...]

World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East[...]