Pelco DX3000 manuale d’uso

The DX3000 Series DVR has an unmarked lock button to restrict unauthorized use of the re- corder . The lock button will work only as long as no one discovers its function. Since you may need to make the manual accessible to others, the lock button’s location and operation are NOT documented in the manual – this is the only place it is shown. If[...]

DX3000 Series Digital Recor der Installation/ Operation Manual C681M-D (2/02) ® Pelco • 3500 Pelco W ay • Clovis, CA 93612-5699 USA • Pelco Online @ www .pelco.com In North America and Canada: T el (800) 289-9100 • F AX (800) 289-9150 • DataF AX (800) 289-9108 International Customers: T el +1(559) 292-1981 • F AX +1(559) 348-1 120 • [...]

2 Pelco Manual C681M-D (2/02) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 5 OVERVIEW ....................................................................................................................... .6 DESCRIPTION ....................................................[...]

Pelco Manual C681M-D (2/02) 3 TCP/IP SETTING (DX3016 Models Only) ................................................................. 49 TIME AND DA TE DISPLA Y ....................................................................................... 49 DISPLA Y MODE ......................................................................................[...]

4 Pelco Manual C681M-D (2/02) LIST OF ILLUSTRA TIONS Figur e Page 1 Front Panel Controls, DX3009 Models .............................................................. 7 2 Front Panel Controls, DX3016 Models .............................................................. 7 3 Rear Panel Connectors, DX3009 Models .......................................[...]

Pelco Manual C681M-D (2/02) 5 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and con- form to all local codes. 2. Unless the unit is specifically marked as a NEMA T ype 3, 3R, 3S, 4, 4X, 6[...]

6 Pelco Manual C681M-D (2/02) OVERVIEW DESCRIPTION The DX3000 Series Digital Video Recorder (DVR) is a high-quality digital recorder that combines the functions of a recorder and multiplexer into one unit. With the number of cameras in systems increasing, the combination of a video recorder with a multiplexer has become standard. In pursuit of the [...]

Pelco Manual C681M-D (2/02) 7 0 3 2 14 6 5 CAMERA 9 8 7 REC ARCHIVE SPLIT/SEQUENCE ZOOM STOP WARNING RESET SEARCH COPY SET UP MENU INFO PAUSE REV PLAY PLAY PLAY MODE -+ CLEAR/ REW ENTER/ FF TIMER REC POWER MAIN COPY ARCHIVE PLAY DEVICE EJECT SHUTTLE HOLD TIMER REC M-DET PRE ALARM REC ACCESS LOCK 1 2 3 8 9 10 11 12 13 14 15 16 17 56 7 4 REC AR[...]

8 Pelco Manual C681M-D (2/02) 3. Recording indicators TIMER REC indicator This light illuminates during timer recording and timer recording standby mode. The POWER button does not work when the TIMER REC indicator is lit. T o turn on the power when the TIMER REC indicator is lit in the standby mode, press the TIMER REC button. M-DET indicator The l[...]

Pelco Manual C681M-D (2/02) 9 8. Mode indicators ACCESS indicator This light flashes when the hard disk drive or peripheral recording devices are being accessed. LOCK indicator This light illuminates when the LOCK button is set to ON. 9. Menu buttons Press one of the buttons to display each menu. Press again to exit the menu. INFO button Press this[...]

10 Pelco Manual C681M-D (2/02) CLOCK ADJ REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND GND DC 5V OUT  MAX 30mA 1 MIC IN OUT 23456789 1 RS-232C 234 1 GND 23456789 CAMERA IN AUDIO CAMERA OUT ALARM IN 56789 ON OFF SCSI Y/C VIDEO OUT GND GND GND 1 3 5 6 2 4 7 8 9 10 11 RESET SCSI TERMINATION 1234 5678 9 1 0 1 1 1 2 1 3 1 4 1 [...]

Pelco Manual C681M-D (2/02) 11 6. AC power socket This socket is for a 100-240 V AC power cord. 7. RS-232C connector This is where a PelcoNet™ T ransmission System can be connected for remote view- ing and control of cameras. 8. ALARM IN terminals These are input terminals for alarm signals. GND terminals These are earth ground terminals for the [...]

12 Pelco Manual C681M-D (2/02) CLOCK ADJ REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND DC 5V OUT MAX 30mA 1 MIC IN OUT 23456789 1 RS-232C 234 123456789 CAMERA IN AUDIO CAMERA OUT ALARM IN 5678 RESET 9 ON OFF SCSI SCSI TERMINATION Y/C OUT VIDEO GND GND GND GND GND MONITOR To VIDEO OUT or S(Y/C) OUT terminal To A UDIO OUT terminal T[...]

Pelco Manual C681M-D (2/02) 13 <Interface circuit inside the unit> 5V 5V 10k Ω  22k Ω  Input terminal 0.047 µ F  GND PO WER ON/POWER OFF/ ALARM IN/REC/CLOCK ADJ Input terminal  • Input Circuit <Interface circuit inside the unit> Output terminal GND terminal ALARM OUT/MODE OUT Output terminal  • Output[...]

14 Pelco Manual C681M-D (2/02) REC ALARM-OUT POWER OFF POWER ON MODE-OUT CALL OUT GND CALL OUT DC 5V OUT MAX 30mA CLOCK ADJUST REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND First Unit Second Unit GND GND GND GND GND <Interface circuit inside the unit> 5V 5V 10k Ω  22k Ω  Input terminal 0.047 µ F  GND PO W[...]

Pelco Manual C681M-D (2/02) 15 CLOCK ADJ REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND DC 5V OUT MAX 30mA RS-232C 123456789 ALARM IN RESET ON OFF SCSI TERMINATION SCSI cable Pe r ipheral copy/archiv e device Te rm inator GND GND GND GND GND SCSI terminal 123456789 1234 CAMERA IN CAMERA OUT 56789 Y/C OUT VIDEO SCSI MIC IN OUT AUDIO[...]

16 Pelco Manual C681M-D (2/02) <DEVICE CHECK> SCSI  ID0:HDD (30GB)  ID1:HDD ( 9GB)  ID2:NONE  ID3:NONE  ID4:NONE  ID5:NONE PWR-OFF INITIALIZE  BOOT UP DELA Y 00   ID4:RDD ID5:DDS  PWR-OFF  BOOT UP DELA Y 00 6. Connect the power cord to the recorder , and then plug the power cord into a wall socket. 7. T urn[...]

Pelco Manual C681M-D (2/02) 17 <DEVICE CHECK> SCSI  ID0:HDD (30GB)  ID1:HDD ( 9GB)  ID2:NONE  ID3:NONE  ID4:NONE  ID5:NONE INITIALIZE ALL HDD  BOOT UP DELA Y 00   ID5:RDD PWR-OFF CONFIG.  BOOT UP DELA Y 00 REMOVING A HARD DRIVE(S) This section applies only to devices removed from ID1-ID3. 1. T urn of f power . 2.[...]

18 Pelco Manual C681M-D (2/02) PROGRAMMING Figure 13. Menu T ree, DX3009 Models <MENU SETTING> TIME DATE DISPLAY MPX DISPLAY TIMER PROGRAM NORMAL REC SETTING A-REC/M-DET SETTING DATA CLEAR SELECTION COMMUNICATION SETTING <TIME DATE DISPLAY> DISPLAY MODE 1 CHARACTER SIZE SMALL CLOCK LOCATION OFF EX.<MODE 1> 01-01-2000 00:00:00 <[...]

Pelco Manual C681M-D (2/02) 19 Figure 13. Menu T ree, DX3009 Models (Continued) <MOTION> SELECTION CAMERA NO. 1 CH.MOTION DETECTION OFF SET DETECTION MASK SENSITIVITY MED MOTION THRESHOLD 2 TEST MODE OFF MAIN MENU SUB MENU (1) SUB MENU (2) SET UP SUB MENU (3) <A-REC/M-DET SETTING> DEFINE GROUP SETTING A-REC DURA TIOM 1M MAX REC FIELDS 1[...]

20 Pelco Manual C681M-D (2/02) Figure 14. Menu T ree, DX3016 Models SU B M EN U ( 1 ) S UB ME N U (2) 01 137[...]

Pelco Manual C681M-D (2/02) 21 Figure 14. Menu T ree, DX3016 Models (Continued) 01 136 (NOT USED)[...]

22 Pelco Manual C681M-D (2/02) ALARMS IMAGE QUALITY Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears. 3. Check that the cursor is next to IM[...]

Pelco Manual C681M-D (2/02) 23 DEFINE GROUP SETTING Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears. 3. T urn the JOG dial to move the curs[...]

24 Pelco Manual C681M-D (2/02) ALARM RECORDING DURA TION Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears. 3. T urn the JOG dial to move the[...]

Pelco Manual C681M-D (2/02) 25 4. T urn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The option stops flashing. T urning the JOG dial switches the record alarm options as follows: ALL, SEP ALL: Alarm recording of all cameras set to be operated on the Define Alarm Group menu will start when the ALARM IN terminal is[...]

26 Pelco Manual C681M-D (2/02) 6. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an- other menu. • Press the SET UP button to exit the programming mode. M-DET SETTING Refer to Motion Detection for instructions. ARCHIVE POINTER RES[...]

Pelco Manual C681M-D (2/02) 27 4. T urn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. T urning the JOG dial switches the archive data options as follows: ALL: This backs up all the data recorded on the main hard disk after the archive pointer . Alternatively , all data will be backed up. ALARM: Of all the data bloc[...]

28 Pelco Manual C681M-D (2/02) AUDIO RECORDING The recorder can record audio with an image. Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor to INITIAL SET UP , and then turn the SHUTTLE ring to the right. The Initial Set Up menu appears. 3. T ur[...]

Pelco Manual C681M-D (2/02) 29 5. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an- other menu. • Press the SET UP button to exit the programming mode. BUZZER Y ou can set the buzzer to sound under different conditions, depending[...]

30 Pelco Manual C681M-D (2/02) CALL OUT A signal from the CALL OUT terminal can be sent to an external device to warn when the hard disk drive or archive device reaches the remaining capacity set in this menu. The call out signal can also activate another recorder if the CALL OUT terminal is wired to the record (REC) input of another recorder . Ski[...]

Pelco Manual C681M-D (2/02) 31 4. T urn the JOG dial to select the device. T urning the JOG dial switches the device options as follows: HDD, ARC, NONE Select HDD if the MODE OUT terminal is wired to the record (REC) input of another recorder . 5. T urn the SHUTTLE ring to the right. The percentage option starts flashing unless NONE was selected. I[...]

32 Pelco Manual C681M-D (2/02) 5. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an- other menu. • Press the SET UP button to exit the programming mode. FIFO/OVERWRITE MODE (DX3016 Models Only) Use this setting when you want to ma[...]

Pelco Manual C681M-D (2/02) 33 HARD DISK DRIVE (HDD) FULL When the end of the hard disk drive (HDD) is reached during recording, this function deter- mines what the recorder will do. Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor to INITIAL SET[...]

34 Pelco Manual C681M-D (2/02) HARD DISK DRIVE (HDD) REPEA T PLA YBACK When the end of the hard disk drive (HDD) is reached during playback, you can set the re- corder either to stop playback or to continue playback from the beginning of the disk. Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Sett[...]

Pelco Manual C681M-D (2/02) 35 5. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to return to the Menu Setting menu to go to another menu. • Press the SET UP button to exit the programming mode. INITIALIZE MENUS Initializing the menus returns most settings to their default [...]

36 Pelco Manual C681M-D (2/02) 4. T urn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The option stops flashing. T urning the JOG dial switches the mode out options as follows: REC, PLA Y , POWER, REMAIN REC: The signal is output during recording. PLA Y : The signal is output during playback. POWER: The signal is o[...]

Pelco Manual C681M-D (2/02) 37 7. Turn the JOG dial to select the M-DET SETTING, and then turn the SHUTTLE ring to the right. The Motion menu appears. This menu will not appear if the MOTION DE- TECTION setting in the Initial Set Up menu is OFF . 8. Check that the cursor is next to SELECTION CAMERA NO., and then turn the SHUTTLE ring to the right. [...]

38 Pelco Manual C681M-D (2/02) 18. Turn the JOG dial to select the threshold, and then turn the SHUTTLE ring to the right. The option stops flashing. Select a number between 1 and 120. The number is the minimum number of active dots required to initiate alarm recording. When establishing a value for the motion threshold setting, use a value that do[...]

Pelco Manual C681M-D (2/02) 39 Four-Camera (Split 4) Setting In the SPLIT 4 setting mode, you select which camera images to show in a four-camera display . Three different groups of cameras can be defined. Skip steps 1-3 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cu[...]

40 Pelco Manual C681M-D (2/02) SPLIT 4 SCREEN SETTING (DX3016 Models Only) In the Split 4 Screen Setting, you select which camera images to show in a four-camera display . Four different groups of cameras can be defined. Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG [...]

Pelco Manual C681M-D (2/02) 41 SPLIT 16 SCREEN SETTING (DX3016 Models Only) Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. T urn the JOG dial to move the cursor next to MPX DISPLA Y , and then turn the SHUTTLE ring to the right. The MPX Display menu appears. 3. T urn the JOG dial t[...]

42 Pelco Manual C681M-D (2/02) SEQUENCE Cameras can be sequenced individually , in groups of four cameras, or , for the DX3016 models only , in groups of nine cameras. Set all sequence patterns. These are the patterns that will be displayed when the SPLIT/SEQUENCE button is pushed (refer to the Operation section). Skip steps 1 and 2 if they have al[...]

Pelco Manual C681M-D (2/02) 43 3. T urn the JOG dial to move the cursor to CH.TITLE, and then turn the SHUTTLE ring to the right. The option starts flashing. NOTE: If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to SHORT , MEDIUM, or LONG, the option does not flash because it cannot be changed. 4. T urn the JOG dial to select th[...]

44 Pelco Manual C681M-D (2/02) CAMERA TITLE T itles can be added for each camera. In single-camera display mode, up to 16 characters can be displayed. In four-camera display mode, the first 8 characters are displayed. T itles cannot be displayed in nine-camera or sixteen-camera display mode. In addition, displayed titles do not get recorded. Skip s[...]

Pelco Manual C681M-D (2/02) 45 4. T urn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The flashing stops. T urning the JOG dial changes the image quality setting as follows: BASIC, ST ANDARD, MEDIUM, HIGH, SUPERIOR 5. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SH[...]

46 Pelco Manual C681M-D (2/02) SELECT RECORDING MODE There are three recording modes: A, B, and C. For example, mode A might be used for daytime recording, mode B for nighttime recording, and mode C for weekend recording. The cameras that will record in each mode are selected in the next section, Define Group . The settings made for image quality a[...]

Pelco Manual C681M-D (2/02) 47 5. T urn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The option stops flashing. T urning the JOG dial changes the priority setting as follows: 1, 2, 3, 4, 5, - The - (hyphen) means that camera channel is turned off; that is, if a camera is con- nected to the DVR, it will not be reco[...]

48 Pelco Manual C681M-D (2/02) SA VING MENU SETTINGS Complex menu settings can be saved on a peripheral recording device connected to SCSI ID number 5. These settings also can be read by the recorder from the peripheral device. SA VING MENU DA T A If you have previously saved menu settings, saving them again will overwrite the current settings on t[...]

Pelco Manual C681M-D (2/02) 49 TCP/IP SETTING (DX3016 Models Only) This menu is not used. TIME AND DA TE DISPLA Y DISPLA Y MODE Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. Make sure the cursor is next to TIME DA TE DISPLA Y , and then turn the SHUTTLE ring to the right. The Time[...]

50 Pelco Manual C681M-D (2/02) 4. T urn the JOG dial to select 1-6, and then turn the SHUTTLE ring to the right. The option stops flashing. An example of the display mode appears on the screen, as shown in the chart below . 5. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to[...]

Pelco Manual C681M-D (2/02) 51 CLOCK LOCA TION Skip steps 1 and 2 if they have already been done. 1. Press the SET UP button to display the Menu Setting menu. 2. Make sure the cursor is beside TIME DA TE DISPLA Y , and then turn the SHUTTLE ring to the right. The Time Date Display menu appears. 3. T urn the JOG dial until the cursor is next to CLOC[...]

52 Pelco Manual C681M-D (2/02) 8. Do one of the following: •T urn the JOG dial to go to another item in this menu. •T urn the SHUTTLE ring to the left to return to the Menu Setting menu to go to another menu. • Press the SET UP button to exit the programming mode. TIMER RECORDING When using the timer to start recording, the Define P1-P3 scree[...]

Pelco Manual C681M-D (2/02) 53 11 . Repeat steps 8-10 for the ending time. A dot between the columns for the starting and ending times indicates that the record- ing time overlaps into the following day; for example, if you select 5 p.m. to 8 a.m. 12. Set the MODE column. Use the JOG dial to select the option, and then turn the SHUTTLE ring clockwi[...]

54 Pelco Manual C681M-D (2/02) 16. Turn the SHUTTLE ring to the left to return to the Timer Program menu. Repeat steps 3-15 to define other patterns. 17. When you finish defining patterns, do one of the following: • Proceed to the next section ( Motion Detection During a Timer Recording ) to set up motion detection to operate during a timer recor[...]

Pelco Manual C681M-D (2/02) 55 MOTION DETECTION DURING A TIMER RECORDING (DX3016 Models Only) This function allows you to set up motion detection to operate during a specified time pe- riod. Recording occurs, however , only if motion is detected. 1. Follow all the steps in the Motion Detection section to turn motion detection on and ac- tivate the [...]

56 Pelco Manual C681M-D (2/02) <TIMER PROGRAM> P1  DW START END MODE  1 DAY 12:00 13:00  DAY 16:00 22:00  3 ——— ——:—— ——:——  00509 01138 ESTIMA TING RECORDING TIME When using the T imer Program, there may be instances where, because of maximum re- cording fields, image quality , and audio recording s[...]

Pelco Manual C681M-D (2/02) 57 01 - 01 - 2000 SA T A0001 00 : 00 : 00 15F 50% C1 Y ear Month Date Day of the week Alarm recording number Minute Second Time Recording interval Camera number Recorded capacity of the Hard Disk Non-operation camera mark OPERA TION Press the POWER button on the front of the recorder to turn on the unit. Video from all n[...]

58 Pelco Manual C681M-D (2/02) VIEWING CAMERAS NOTE: Y ou cannot operate the CAMERA buttons when a menu is displayed on the screen. The buttons do not work when the recorder is accessing a peripheral recording device or the ARCHIVE, COPY , or PLA Y button is flashing. Press the CAMERA buttons (1-9) buttons to view images from cameras connected to C[...]

Pelco Manual C681M-D (2/02) 59 ZOOM BUTTONS NOTE: Y ou cannot operate the ZOOM buttons when a menu is displayed on the screen. The buttons do not work when the recorder is accessing a peripheral recording device or the ARCHIVE, COPY , or PLA Y button is flashing. 1. Display the Zoom Pointer (X) by pressing the ZOOM button. 2. Move the pointer to th[...]

60 Pelco Manual C681M-D (2/02)  ALARM RECORDING Alarm recording commences upon either of the following conditions: • An ALARM IN terminal is triggered by an alarm sensor •A camera detects motion When there is an alarm: 1) The recorder switches to its preset recording intervals. Refer to Alarms in the Pro- gramming section for alarm settings.[...]

Pelco Manual C681M-D (2/02) 61 TIMER RECORDING 1. Select the timer program (P1, P2, or P3) that you want to use for recording. Refer to T imer Recording in the Programming section. 2. Press the TIMER REC button. The TIMER REC indicator illuminates. If the current time is covered by a program, the unit begins recording immediately . If the current t[...]

62 Pelco Manual C681M-D (2/02) FRAME-BY -FRAME (STILL FRAME) PLA YBACK 1. Press the P AUSE button during playback. The unit shifts into still-frame mode. 2. If the screen shows more than one camera, you can view a full-screen view of a single camera by pressing the CAMERA button for that camera. 3. T urn the JOG dial in either direction during stil[...]

Pelco Manual C681M-D (2/02) 63 Still-Frame Playback Mode 1. Press the P AUSE button while the recorder is in playback or reverse playback. The unit shifts to still-frame playback mode. 2. T urn the SHUTTLE ring to the desired playback speed. 3. The unit shifts to still-frame playback mode when the SHUTTLE ring is returned to the center position. Sh[...]

64 Pelco Manual C681M-D (2/02) 4. Turn the JOG dial to move the cursor beside TIME DA TE SEARCH, and then turn the SHUTTLE ring to the right. The Time Date Search menu appears and the month num- ber starts flashing. NOTE: If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to SHORT , MEDIUM, or LONG, the menu cannot be accessed. To [...]

Pelco Manual C681M-D (2/02) 65 Present position Beginning of playback device End of playback device -15 -1 -2 +1 +15 +2 A•REC A•REC A•REC A•REC A•REC A•REC A•REC: Alarm Recording 6. Turn the SHUTTLE ring in the desired search direction. The present position in the diagram below represents the point of playback or stopped playback. T o[...]

66 Pelco Manual C681M-D (2/02) Alarm List Search The Alarm List search retrieves alarm video at the time an alarm occurred. It does not re- trieve pre-alarm recording if the pre-alarm recording option was turned on (PRE A-REC field in the A-Rec/M-Det Setting menu). Up to 500 alarm times (DX3009 models) or 800 alarm times (DX3016 models) can be stor[...]

Pelco Manual C681M-D (2/02) 67 5. Press the PLA Y or P AUSE button to play back the searched image. 6. Press the STOP button to stop playback and exit the search function. PLA YBACK ON ANOTHER DEVICE Data recorded on an external copying or archiving device can be played back on a per- sonal computer or laptop computer . 1. Make sure the PC or lapto[...]

68 Pelco Manual C681M-D (2/02) Auto-Eject at the Completion of Backup The archive medium will be automatically ejected under the following conditions: When the archive medium becomes full during archive backup. Refer to Auto Eject in the Programming section. When the archive medium becomes full during timer backup. Refer to Auto Eject in the Pro- g[...]

Pelco Manual C681M-D (2/02) 69 SUPERIOR HIGH MEDIUM ST ANDARD BASIC Non- selectable 30F 15F 7.5F 5F :Simultaneous backup is possible without audio :Simultaneous backup is possible with audio IMAGE QUALITY Field/sec. b. Use the JOG dial and SHUTTLE ring to set the month, date, year , hour , minute, and second of the starting time. c. Tur[...]

70 Pelco Manual C681M-D (2/02) RECORDING A- 7.5F (or POWER setting) Illustration 1: Correct setting Backup Longer than 5 minutes RECORDING A- 7.5F (or POWER setting) Backup RECORDING A- 7.5F (or POWER setting) Longer than 1 minutes Longer than 1 minutes Illustration 2 3. Precautions when designating simultaneous timer backup The backup program, whi[...]

Pelco Manual C681M-D (2/02) 71 INFORMA TION ELAPSED TIME DISPLA Y 1. Press the INFO button. The Information menu appears. The elapsed time appears in the lower part of the screen. 2. T o exit the menu, press the INFO button again. The elapsed time of main hard disk drive, archive device, and copy device are shown on the screen. The elapsed time for[...]

72 Pelco Manual C681M-D (2/02) RECORDED PERIOD The recorded periods of the main hard disk drive, the archive device, and the copy device are shown on the screen. The archive device is displayed only when an archive device is connected to ID4. The copy device is displayed only when a copy device is connected to ID5. 1. Press the INFO button. The Inf[...]

Pelco Manual C681M-D (2/02) 73 Audio recording possible. (12.8kHz sampling) Audio recording possible, but with diminished quality . (8kHz sampling) Audio recording not possible. ■ Audio recor ding time table Approximate recording time (if recording is made with internal 30 GB HDD) ♦ Without Audio recor ding ♦ Audio recor ding ■ Audio recor [...]

74 Pelco Manual C681M-D (2/02) 30F 15F 7.5F 5F 3F 1F Field/sec. SUPERIOR HIGH MEDIUM ST ANDARD BASIC 2s 3s 5s 6s 8s 4s 7s 10s 13s 16s 9s 14s 20s 26s 33s 13s 21s 30s 40s 50s 23s 36s 51s 1min7s 1min24s 1min9s 1min48s 2min33s 3min21s 4min12s IMAGE QUALITY 30F 15F 7.5F 5F 3F 1F 1s 2s 3s 4s 5s 3s 4s 6s 8s 11s 6s 9s 13s 17s 22s 9s 14s 20s 26s 33s 15s 24s[...]

Pelco Manual C681M-D (2/02) 75 ♦ Without audio Pre-Alarm Recording, r ecording duration is set to SHORT . ♦ Audio recor ding, Pre-Alarm Recording duration is set to LONG. ♦ Audio recor ding, Pre-Alarm Recording duration is set to MIDDLE. ♦ Audio recor ding, Pre-Alarm Recording duration is set to SHORT . Audio recording possible. (12.8kHz sa[...]

76 Pelco Manual C681M-D (2/02) Audio recording possible. (12.8kHz sampling) Audio recording possible, but with diminished quality . (8kHz sampling) Audio recording not possible. ■ Audio recor ding time table Approximate recording time (if recording is made with internal 60 GB HDD) • This recording time display chart is only valid when PRIORITY [...]

Pelco Manual C681M-D (2/02) 77 DX3016 RECORDING TIME T ABLES (Continued) Audio recording possible. (12.8kHz sampling) Audio recording possible, but with diminished quality . (8kHz sampling) Audio recording not possible. ■ Pre-alarm recor ding time table ♦ Without Audio recor ding, recording duration is set to LONG. ♦ Without Audio recor ding,[...]

78 Pelco Manual C681M-D (2/02) DX3016 RECORDING TIME T ABLES (Continued) Audio recording possible. (12.8kHz sampling) Audio recording possible, but with diminished quality . (8kHz sampling) Audio recording not possible. ♦ Audio recor ding, recording duration is set to MEDIUM. ♦ Audio recor ding, recording duration is set to SHOR T . 30F 15F 7.5[...]

Pelco Manual C681M-D (2/02) 79 W ARNINGS The following table tells you what to do if a warning appears on your monitor . Options in the CALL OUT options column: • Selectable: CALL OUT output can be selected or deselected in the Call Out setting in the Rear T erminal menu and the HDD Full setting in the Initial Set Up menu. •Y es: CALL OUT signa[...]

80 Pelco Manual C681M-D (2/02) Description of pr oblem Please consult the follo wing The unit will not turn on. Power is on, but the unit will not operate. Images are not appearing on the monitor . The quality of the monitor picture is poor . The unit will not start recording. The unit will not stop recording. The unit will not perform Repeat Recor[...]

Pelco Manual C681M-D (2/02) 81 OTHERS Description of pr oblem Please consult the follo wing The unit will not respond to PC control. The DEVICE CHECK menu does appear when power is turned on. The unit is not detecting its peripheral recording device(s). Black screens are being displayed during multi-screen display . Button operation is not working.[...]

82 Pelco Manual C681M-D (2/02) SPECIFICA TIONS ELECTRICAL/VIDEO/AUDIO Input V oltage: 100-240 V AC, 50/60Hz Power Consumption: 150W maximum Signal System: NTSC Recording System: Digital recording system with JPEG compression method Sampling: 13.5 MHz Data Compression: JPEG Compression Unit: Field Audio Recording System: PCM Resolution: 684 x 480 pi[...]

Pelco Manual C681M-D (2/02) 83 Inputs/Outputs POWER ON: Input for power ON. Low input state is power off; high input state is power on. POWER OFF: Input for power OFF . Low input state is power of f. ALARM IN (1-9): Inputs for starting alarm recording. Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Ope[...]

84 Pelco Manual C681M-D (2/02) ® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco. © Copyright 2002, Pelco. ™ Esprit, Camclosure, and PelcoNet are trademarks of Pelco. All rights reserved. W ARRANTY AND RETURN INFORMA TION REVISION HISTOR Y Manual # Date Comments C681M 01/01 Original version. C681M-A 01/01 Ad[...]