Pioneer DEH-P700BT manuale d’uso

Operation Manual CD RECEIVER DEH-P700BT English[...]

Thank you for buying this P ioneer product. Please read through these operating instructions so you will know how to operate your model properly. A fter you have finished read ing the instructio ns, keep this man- ual in a safe place for future r eference. Before Y ou Start Information to User 5 For Canadian model 5 About this unit 5 After-sales se[...]

– Stopping playback 27 – Connecting to a Bluetooth audio player automatically 27 – Displaying BD (Bluetooth Device) address 28 Bluetooth T elephone 28 – Setting up for hands-free phoning 28 – Introduction of connection and registration 29 – Connecting and disconnecting a cellular phone 29 – Making a phone call 32 – T aking a phone c[...]

Available accessories Playing songs on iPod 54 – Basic operation 54 – Displaying text information on iP od 54 – Browsing for a song 54 – Introduction to advanced operations 54 – Playing songs in a random order (shuffle) 55 XM tuner 55 – Listening to XM Satellite Radio 55 – Selecting an XM channel directly 55 – Switching the XM displ[...]

Information to User FCC ID: AJDK016 MODEL NO.: DEH-P700B T IC: 775E-K016 This device complies with P art 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause inter ference, and (2) this device must accept any inter ference, including inter- ference that may cause undesired oper[...]

WARNING Handling the cord on this product or cords asso- ciated with accessories sold with the product may expose you to chemicals listed on proposi- tion 65 known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling . CA UTION: USE OF CONTROL OR ADJUSTM E[...]

F or details about the compatibility, refer to USB audio player/USB memor y compatibility on page 72. iPod ® compatibility This unit can control and listen to songs on an iP od. ! This unit supports only the following iPods. Supported iP od software versions are shown below . Older versions of iPod soft- ware may not be supported. — iP od nano f[...]

CAUTION ! P ioneer accepts no responsibility for data lost on the USB portable audio player/USB mem- ory even if that data is lost while using this unit. ! P ioneer accepts no responsibility for data lost on the iPod even if that data is lost while using this unit. After -sales service for Pioneer products Please contact the dealer or distributor f[...]

3 Put the front panel into the provided protective case for safe keeping. Attaching the front panel % Reattach the front panel by holding it upright to the unit and clipping it securely into the mounting hooks. Resetting the microprocessor The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time[...]

! If the batter y leaks, wipe the remote control completely clean and install a new batter y . ! When disposing of used batteries, comply with governmental regulations or environmen- tal public institutions ’ rules that apply in your country/area. ! “ P erchlorate Material – special handling may apply . See www .dtsc.ca.gov/hazardouswaste/ pe[...]

What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source. Press to cycle through all the available sources. 2 DISP/SCROLL button Press to select different displays. 3 OPEN button Press to open the front panel. 4 LIST button Press to display the disc title list, track title list, folder list, file list, preset channel [...]

a MUTE/HOLD button Press to turn off the sound. T o turn on the sound, press again. While talking on the phone, press to put the call on hold. b MUL TI-CONTROL Move to per form manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. T urn to increase or decrease the volume. c BAND/ESC button Press t[...]

Display indication 1 Main display section Displays band, frequency, elapsed playback time and other settings. ! T uner Band and frequency are displayed. ! Bulit-in CD player , USB, iPod Elapsed playback time and literal infor- mation are displayed. 2 LOC indicator Appears when local seek tuning is on. 3 5 (stereo) indicator Appears when the selecte[...]

Basic Operations Power ON/OFF T urning the unit on % Press SRC to tur n the unit on. T urning the unit off % Press OFF and hold until the unit tur ns off. Selecting a source Y ou can select a source you want to listen to. T o switch to the built-in CD player , load a disc in the unit (refer to page 16). % Press SRC repeatedly to switch be- tween th[...]

T uner Basic Operations % Select a band Press BAND/ESC . # Band can be selected from among FM1 , FM2 , FM3 or AM . % Manual tuning (step by step) Push MUL TI-CONTROL left or right. % Seek tuning Push and hold MUL TI-CONTROL left or right, and then release. # Y ou can cancel seek tuning by pushing MUL TI-CONTROL left or right. # While pushing and ho[...]

1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MUL TI-CONTROL to select BSM in the function menu. 3 Press MUL TI-CONTROL to turn BSM on. The six strongest broadcast frequencies are stored in the order of their signal strength. # T o cancel, press MUL TI-CONTROL again. T uning in strong signals [...]

# If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc. Notes ! The built-in CD player can play back audio CD and compressed audio recorded on a CD- ROM. (Refer to page 72 for files that can be played back.) ! Read the precautions for discs and player on page 71. ! A disc has already been inserted,[...]

Selecting tracks from the track title list T rack title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back. 1 Press LIST to switch to the track title list mode. 2 Use MUL TI-CONTROL to select the de- sired track title. T urn to change the track title. Press to play . # Y ou can also change the track tit[...]

2 Use MUL TI-CONTROL to select REPEA T in the function menu. 3 Press MUL TI-CONTROL to select the de- sired setting. ! DISC – Repeat all tracks ! TRACK – Repeat the current track ! FOLDER – Repeat the current folder # If you select another folder during repeat play, the repeat play range changes to disc repeat. # P er forming track search or [...]

Entering disc titles Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long. 1 Display the function menu. Refer to Introduction to advanced operations on page 18. 2 Play the CD that you want to enter a title for . 3 Use MUL TI-CONTROL to select TITLE INPUT in the function menu. 4 Press M[...]

Playing songs on USB portable audio player/USB memory F or details about the supported device, refer to P ortable audio player compatibility on page 6. Basic Operations % Select a folder Push MUL TI-CONTROL up or down. % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track Push MUL TI-CONTROL left or right. % Return [...]

Function and operation REPEA T , RANDOM , SCAN , P AUSE and S. RTRV operations are basically the same as that of the built-in CD player . Function name Operation REPEA T Refer to Selecting a repeat play range on page 18. However , the repeat play ranges you can select are different from that of the built-i n CD player . The repeat play ranges of th[...]

2 Use MUL TI-CONTROL to select a cate- gory . T urn to change the categor y; press to select. PLA YLISTS (playlists) — ARTISTS (artists) — ALBUMS (albums) — SONGS (songs) — PODCASTS (podcasts) — GENRES (genres) — COMPOSERS (composers) — AUDIOBOOKS (audiobooks) List for the selected categor y is displayed. # Y ou can start playback thr[...]

Function name Operation REPEA T Refer to Selecting a repeat play range on page 18. However , the repeat play ranges you can select are different from that of the built-i n CD player . The repeat play ranges of the iPod are: ! ONE – Repeat the current song ! ALL – Repeat all songs in the selected list P AUSE Refer to Pausing playback on page 19.[...]

— iP od fifth generation (software version 1.2.1) This unit ’ s iP od function can be operated from your iP od. Sound can be heard from car ’ s speaker , and operation can be conducted from your iP od. ! While this function is in use, even if the ignition key is turned off , iPod is not turned off . T o turn off power , operate the iPod. 1 Pr[...]

Using a Bluetooth audio player to initiate a connection 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select CONNECTION. T urn to change the menu option. Press to se- lect. # Y ou can also select this menu by pressing and holding PHONE / / CONNECT on the ordinary display . 3 T ur n MUL TI-CONTROL to select BT AUDIO DEVICE[...]

Basic Operations % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track Push MUL TI-CONTROL left or right. Note Even though your audio player does not contain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technology . T o control your audio player using this unit, connect a produc[...]

3 Press MUL TI-CONTROL to turn auto- matic connection on. If your Bluetooth audio player is ready for Bluetooth wireless connection, connection to this unit is automatically established. # T o turn automatic connection off , press MUL TI-CONTROL again. Displaying BD (Bluetooth Device) address This unit displays the BD address of this unit. 1 Displa[...]

# If the difference between the ring volume and caller ’ s voice volume is big, overall volume level may become unstable. # Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cel- lular phone remains muted ev[...]

5 Select P AIRE FROM PHONE and then press MUL TI-CONTROL to ready for pairing. READY will be displayed. 6 Use your cellular phone to establish connection. PIN code is set to 0000 as the default. Y ou can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 48. While connecting, CONNECTING i[...]

# If the connection fails, ERROR is displayed. In this case, check the cellular phone and tr y again. # If three cellular phones have already been paired, the pairing assignment selection display will appear . Select one assignment to pair the new phone. The newly paired phone over writes the previously paired phone. The assignment se- lection oper[...]

3 Push MUL TI-CONTROL up or down to select a pairing assignment. 1 (user phone 1) — 2 (user phone 2) — 3 (user phone 3) # P ush MUL TI-CONTROL left or right to switch the BD address and device name. # If a phone is already assigned to the user phone number , the new phone will overwrite the old one. # As you select each assignment, you can see [...]

T aking a phone call Answering or rejecting an incoming call % Answering an incoming call When a call comes in, press MUL TI-CONTROL . # Y ou can also take a phone call by pressing OFF HOOK on the remote control. % End a call Press . # Y ou can also end the call by pressing ON HOOK on the remote control. % Rejecting an incoming call When a call com[...]

# If no phone numbers are stored in the se- lected list, NO DA T A is displayed. Using the call history The 20 most recent calls dialed, rece ived, and missed are stored in the call histor y. Y ou can browse the call histor y and call numbers from it. 1 Press LIST to display RECENT CALLS (call history list). Refer to Using the phone number list on [...]

Editing phone numbers Y ou can edit the phone numbers of phone book entries. 1 Display the phone number list of your desired phone book entry . See step 1 to 5 on Calling a number in the phone book on the previous page for how to do this. 2 Press and hold MUL TI-CONTROL to dis- play the edit screen. 3 T ur n MUL TI-CONTROL to display EDIT NUMBER (n[...]

5 Press MUL TI-CONTROL to delete the Phone Book entry . The Phone Book entr y is deleted and CLEARED is displayed. The display returns to Phone Book entr y list. Using preset numbers Numbers that you dial frequently can be as- signed to presets for quick recall. Assigning preset numbers 1 Press LIST to display DIAL PRESET (pre- set number list). Re[...]

3 Press MUL TI-CONTROL to select a preset phone number that you want to delete. 4 Press and hold MUL TI-CONTROL to dis- play MEMOR Y. Push MUL TI-CONTROL up or down to switch MEMOR Y (memor y) and DELETE (delete). # About assigning , Assigning preset numbers on the previous page. 5 Select DELETE and then press MUL TI-CONTROL to delete the preset ph[...]

3 T ur n MUL TI-CONTROL to select the function. PH BOOK DOWNLOAD (phone book down- load) — PH BOOK TRANSFER (phone book transfer) — AUTO CONNECT (automatic con- nection setting) — AUTO ANSWER (automatic answer setting) — ECHO CANCEL (echo can- cel) — RING TONE (ring tone select) — NUMBER DIAL (call by entering number) — CLR MEMO (clea[...]

3 Push MUL TI-CONTROL left or right to move the cursor to the previous or next character position. 4 Press MUL TI-CONTROL to determine the ID and the password. 5 After entering the ID and password, use your cellular phone to continue the procedure. T ransferring entries to the phone book Phone books in your cellular phone can be transferred to this[...]

Switching the ring tone 1 Display the function menu. Refer to Introduction to advanced operations on page 37. 2 Use MUL TI-CONTROL to select RING TONE in the function menu. 3 Push MUL TI-CONTROL left or right to select the desired setting. OFF (off) — 1 — 2 — 3 Making a call by entering phone number Important Be sure to park your vehicle and [...]

Pressing MUL TI-CONTROL repeatedly changes the name view order between first and last name. Selecting menu language Menu language related to Bluetooth audio/tel- ephone can be changed. ! Some characters may not be displayed properly . 1 Display the function menu. Refer to Introduction to advanced operations on page 37. 2 Use MUL TI-CONTROL to selec[...]

Introduction of audio adjustments 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select AUDIO. T urn to change the menu option. Press to se- lect. The audio menu is displayed. 3 T ur n MUL TI-CONTROL to select the audio function. T urn MUL TI-CONTROL to switch between the audio functions in the following order . FADER (bal[...]

! CUSTOM is an adjusted equalizer cur ve that you create. If you make adjustments to an equalizer cur ve, the equalizer curve set- ting is memorized in CUSTOM . ! When FLA T is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer cur ves by switching alternatively between FLA T and a set eq[...]

4 Push MUL TI-CONTROL left or right to select a desired level. Each time MUL TI-CONTROL is pushed left or right, level is selected in the following order: LOW (low) — MID (mid) — HIGH (high) Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off . Also, phase can be selected between normal and reverse[...]

Boosting the bass Bass boost function boosts the bass level of sound. 1 Display the audio menu. Refer to Introduction of audio adjustments on page 42. 2 Use MUL TI-CONTROL to select BASS BOOST. 3 Push MUL TI-CONTROL up or down to select a desired level. 0 to +6 is displayed as the level is increased or decreased. Adjusting source levels Source leve[...]

Adjusting initial settings 1 Press SRC and hold until the unit tur ns off. 2 Press MUL TI-CONTROL and hold until the initial setting menu appears in the dis- play . 3 T ur n MUL TI-CONTROL to select one of the initial settings. CLNDR (calendar) — CLOCK (clock) — WARNING (warning tone) — AUX1 (auxiliary input 1) — AUX2 (auxiliar y input 2) ?[...]

3 Press MUL TI-CONTROL to turn warning tone on. # T o turn warning tone off, press MUL TI-CONTROL again. Switching the auxiliary setting Auxiliar y devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliar y devices, refer to Using the AUX source on pa[...]

Setting the interna l power amplifier This unit features high power amplifier . How- ever , in particular system, external amplifiers are used instead of internal amplifier . If you use external amplifiers in order to establish a multi-amp system, and don ’ t use internal am- plifier , it is recommended to turn off the inter- nal amplifier . T ur[...]

# P ushing MUL TI-CONTROL right in the confir- mation display returns you to the PIN code input display , and you can change the PIN code. Editing device name Y ou can edit the device name. The device name is set to PIONEER FLAP BT as default. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 46. 2 Use MUL TI-CONTROL t[...]

3 Push MUL TI-CONTROL right to show a confirmation display . BT RESET :YES is displayed. Clearing memor y is now on standby . # If you do not want to reset phone memor y , press BAND/ESC . 4 Press MUL TI-CONTROL to clear the memory . Updating the software about Bluetooth connection This function is used to update this unit with the latest software.[...]

Using the AUX source Up to two auxiliar y devices such as VCR or portable devices (sold separately) can be con- nected to this unit. When connected, auxiliar y devices are automatically read as AUX sources and assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below . About AUX1 and AUX2 There are two methods[...]

Basic operation F unctions allocated to the following opera- tions are different depending on the con- nected external unit. For details concerning functions, refer to the connected external unit ’ s owner ’ s manual. % Press BAND/ESC. % Press and hold BAND/ESC. % Push MUL TI-CONTROL left or right. % Push and hold MUL TI-CONTROL left or right. [...]

% Press PGM and hold to tur n BSM on when selecting tuner or HD Radio as the source. Press PGM and hold until the BSM turns on. # T o cancel the storage process, press PGM again. % Press PGM and hold to tur n BSSM on when selecting television as the source. Press PGM and hold until the BSSM turns on. # T o cancel the storage process, press PGM agai[...]

Playing songs on iPod Basic operation Y ou can use this unit to contr ol an inter face adapter for iP od, which is sold separately . % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track Push MUL TI-CONTROL left or right. Notes ! Read the precautions for iPod on page 74. ! While iP od is connected to this unit, PION[...]

Playing songs in a random order (shuf fle) % Press repeatedly to select the de- sired setting. ! SONGS – Play back songs in the selected list in random order . ! ALBUMS – Play back songs from a ran- domly selected album in order . ! OFF – Cancel random play . # T o turn shuffle off, press again. Note Y ou can also perform this operation in th[...]

# Y ou can also change the station by pushing MUL TI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. Using the remote control % When you find a station that you want to store in memory , press one of preset tuning buttons 1 to 6 and hold until the XM preset[...]

% Select a channel. Push MUL TI-CONTROL left or right. # If you push and hold MUL TI-CONTROL left or right, you can increase or decrease channel num- ber continuously . # Y ou can also per form tuning from a desired channel category. (Re fer to Selecting a channel in the channel categor y on the next page.) Note It may take a few seconds before you[...]

Notes ! Y ou can also select the function by pressing FUNCTION on the remote control. ! T o return to the ordinary display , press BAND/ESC . ! If you do not operate functions within about 30 seconds, the display is automatically re- turned to the ordinary display . ! During the Instant Replay mode, you can se- lect P AUSE (pause). Refer to Using I[...]

Switching the Game Alert on or off Once you made team selections, you need to turn the Game Alert function on. ! The Game Alert function is on at the default setting. 1 Display the function selection menu. Refer to Introduction of advanced operations on page 57. 2 Use MUL TI-CONTROL to select GAME ALERT in the function menu. 3 Press MUL TI-CONTROL [...]

% Select a track Push MUL TI-CONTROL left or right. % Fast forward or reverse Push and hold MUL TI-CONTROL left or right for about one second and release. HD Radio tuner Basic Operations Y ou can use this unit to contr ol an HD Radio tuner (GEX-P10HD), which is sold separately . F or details concerning operation, refer to the HD Radio ’ s operati[...]

Introduction to advanced operations 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option. Press to se- lect. The function menu is displayed. 3 T ur n MUL TI-CONTROL to select the function. BSM (best stations memor y) — LOCAL (local seek tuning) — SEEK MODE (seek mode) — BLEN[...]

! For discs 7 to 12, press and hold the corre- sponding numbers, such as 1 for disc 7, until the disc number appears in the dis- play . % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track Push MUL TI-CONTROL left or right. Notes ! When multi-CD player completes preparator y operations, READY is displayed. ! If an [...]

P AUSE Refer to Pausing playback on page 19. TITLE INPUT Refer to Entering disc titles on page 20. Notes ! Y ou can also select the function by pressing FUNCTION on the remote control. ! T o return to the playback display, press BAND/ESC . ! If you select other discs during repeat play , the repeat play range changes to MCD . ! If you per form trac[...]

2 Display the function menu. Refer to Introduction to advanced operations on page 62. 3 Use MUL TI-CONTROL to select ITS PLA Y in the function menu. 4 Press MUL TI-CONTROL to turn ITS play on. ITS PLA Y : ON appears in the display. Playback begins of those tracks from your playlist within the previously selected MCD or DISC ranges. # If no tracks i[...]

Displaying disc titles Y ou can display the text information of any disc that has the disc title entered. The operation is the same as that of the built- in CD player . Refer to Displaying text information on disc on page 17. Selecting discs from the disc title list Disc title list lets you see the list of disc titles entered in the multi-CD player[...]

2 Use MUL TI-CONTROL to select FUNCTION. The function menu is displayed. T urn to change the menu option. Press to se- lect. 3 T ur n MUL TI-CONTROL to select the function. During DVD video or Video CD playback REPEA T (repeat play) — P AUSE (pause) During CD playback REPEA T (repeat play) — RANDOM (random play) — SCAN (scan play) — P AUSE [...]

! When playing back compressed audio, if you select another folder during repeat play , the repeat play range changes to DISC . ! When playing back compressed audio, if you perform track search or fast forward/reverse during TRACK , the repeat play range changes to FOLDER . ! Multi-DVD player that has ITS functions and disc title functions can also[...]

Storing the strongest broadcast stations sequentially 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL and select FUNCTION to display BSSM. 3 Press MUL TI-CONTROL to turn BSSM on. SEARCH begins to flash. While SEARCH is flashing, the 12 strongest broadcast stations are stored in order from the lowest channel up. When finished, [...]

T roubleshooting Bluetooth audio/telephone Symptom Cause Action The audio of the Bluetooth audio source is not played back. A Bluetooth-con- nected cellular phone is cur- rently in a phone call. The audio will be played back when the call is com- pleted. A Bluetooth-con- nected cellular phone is cur- rently in opera- tion. Do not operate the cellul[...]

CHECK USB The USB connec- tor or USB cable is short-circuited. Confirm that the USB connector or USB cable is not caught in some- thing or damaged. The connected USB portable audio player/ USB memory consumes more than 500 mA (maximum allow- able current). Disconnect the USB portable audio player/USB memory and do not use it. T urn the ignition swi[...]

Handling guideline of discs and player ! Use only discs featuring either of following two logos. ! Use only conventional, fully circular discs. Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! Do not use cracked, chipped, warped, or oth[...]

! MP3i (MP3 interactive), mp3 PRO: No AAC ! Compatible format: AAC encoded by iT unes ® ! Sampling frequency: 11.025 kHz to 48 kHz ! T ransmission rate: 16 kbps to 320 kbps ! AAC file bought on the iT unes Store (.m4p file extension): No ! Apple Lossless: No WA V ! Compatible format: Linear PCM (LPCM), MS ADPCM ! Quantization bits: 8 and 16 (LPCM)[...]

Notes ! P artitioned USB memor y is not compatible with this unit. ! Depending on the kind of USB portable audio player/USB memory you use, this unit may not recognize the USB audio player/USB memory or audio files may not be played back properly . ! This unit can play back files in the USB porta- ble audio player/USB memory that is USB Mass Storag[...]

! 01 to 05 represent assigned folder num- bers. 1 to 6 represent the playback se- quence. The user cannot assign folder numbers and specify the playback se- quence with this unit. ! Playback sequence of the audio file is the same as recorded sequence in the USB de- vice. ! T o specify the playback sequence, the fol- lowing method is recommended. 1 [...]

Specifications General Po w e r s o u r ce ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... N e g ative type Max. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1 7 8 m m × 5 0 m m × 1 62 mm (7 in.[...]

CEA2006 Specifications Po w e r o u t p u t ............................. 1 4 W R M S × 4 C h annels (4 W and ≦ 1 % THD+N) S / N r a t i o ....................................... 9 1 d B A (reference : 1 W into 4 W ) Note Specifications and the design are subject to mod- ifications without notice due to improvements. Additional Information En 76[...]

PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 Alexandra Road, #04-01, S[...]