Planar PQ191M manuale d’uso

PLANAR LCD MONITOR P Q 1 9 1 M M A N U A L www.planar.com[...]

A1 This unit has been engineered and manufactur ed to ensure your personal safet y , however imp r oper use may r esult in electrical shock or fi r e hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing. On Safety Use only the powe[...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

A3 Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density ([...]

A4 Control Panel Functions LightView Front Panel Controls Buttons Use these buttons to choose or adjust items in the On Screen Display. MENU Button Use this button to enter or exit the On Screen Display. Use this button to turn the display on or off. This Indicator lights up green when the display operates normally. If the display is in DPM (Energy[...]

A5 Control Panel Functions Control Direct Access Function This function optimizes the brightness, contrast or color value to the surrounding conditions and settings and enables you to enjoy the most suitable picture by adjusting the surroundings (DAY/NIGHT/USER MODE). • TEXT: For viewing letters • MOVIE: For viewing movies • PHOTO: For viewin[...]

A6 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Scr een Display Control system. A short example is given below to familiarize you with the use of the contr ols. The following section is an outline of the available adj[...]

A7 NOTE The order of icons may differ depending on the model (A7~A9). On Screen Display(OSD) Selection and Adjustment To adjust the brightness and contrast of the screen BRIGHTNESS CONTRAST COLOR POSITION TRACKING SETUP Main menu Sub menu A D Reference The following table indicates all the On Scr een Display control, adjustment, and setting menus. [...]

A8 On Screen Display(OSD) Selection and Adjustment Y ou were intr oduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. OSD Adjust Description BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast[...]

A9 On Screen Display(OSD) Selection and Adjustment T o improve the clarity and stability of the screen OSD Adjust Description To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or shar[...]

A10 T roubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator green? Is the power indicator amber? Do you see an "INPUT SIGNAL OUT OF RANGE" message on the screen? Do you see a "[...]

A11 T roubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks. Press the AUTO/SELECT button to automatically adjust your display[...]

A12 Specifications NOTE Information in this document is subject to change without notice. Flat Panel Active matrix-TFT LCD 19 inch diag viewable, Anti-Glare coating, 0.29 mm pixel pitch Horizontal Viewing Angle: -85 to +85 deg typical Vertical Viewing Angle: -85 to 85 deg typical Horizontal Freq. Analog:30 - 83kHz (Automatic) Digital:30 - 71kHz (Au[...]

A13 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 68.6[...]

A14 Specifications Signal Connector Pin Assignment 1 8 9 17 24 16 C1 C4 C3 C2 C5 Pin Signal(DVI-I) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync. T. M. D. S. Data1- T. M. D. S. Data1+ T. M. D. S. Data1/3 Shield T. M. [...]

A15 Making use of USB (Universal Serial Bus) - Optional USB (Universal Serial Bus) is an innovation in connecting your dif fer ent desktop peripherals conveniently to your computer . By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer . This wil[...]

A1 6 Making use of USB (Universal Serial Bus) - Optional IMPORTANT: These USB connectors are not designed for use with high-power USB devices such as a video camera, scanner, etc. R ecommend connecting high-power USB devices directly to the computer Rev. 1.1 complied BUS-powered hub 100mA for each (MAX) 12 Mbps (full), 1.5 Mbps (low) 1 Upstream por[...]

       P LA N A R S Y STEM S , I N C .      Customer Service support: http://planar.custhelp.com email: desktopmonitors@planar.com phone: 1-866-PLANAR-1 (1-866-752-6271) hours: M-F, 8am - 9pm EST © 2003 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and nam[...]