Planar PR Line PR6022 manuale d’uso

[...]

— i — c. Beaverton, OR 97006-1992 stomer Support 2-6271 : http://www.planar.com/support 24/7 Technical Support Planar Systems, In Corporate Headquarters 1195 NW Compton Drive Planar Cu Telephone: US: 1-866-PLANAR1 (866) 75 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library[...]

User’s Manual — ii — Copyright This publication, including all photographs, illustratio n s and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2008 Disclaimer The informa[...]

Preface — iii — Important Safety Information Congratulations on purchasing the Planar DLP ® projector! Important: It is strongly recommended that you read this secti on carefully before using the projector. These safety and usage instructions will ens ure that you enjoy many years of safe use of the projector. Keep this manual for future refer[...]

DLP ® Projector – User’s Manual Power Safety  Only use the supplied power cord.  Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.  Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be ha[...]

Preface Main Features • Lightweight unit, easy to pack away and transport. • Comp atible with all major video standards including NTSC, P AL, and SECAM. • A high brightness rating allows for present ations in daylight or in lit rooms. • Supports resolutions up to SXGA at 16.7 million colors to deliver crisp, clear images. • Flexible setup[...]

DLP ® Projector – User’s Manual — vi — Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST ..........................................................................................[...]

Preface — vii — Check the audio c able co nnection............................................................................................... .................................. 43 H AVING THE P ROJECTOR S ERVICED ............................................................................................................................... .[...]

– 1 – Getting Started Packing Checklist Carefully unpack the projector and check that the following items are included: PR6022 DLP projector Remote control (with one 3V CR2025 battery) RGB cable Power cord RGB to Component Adapter (Optional) Quick Start Guide CD-ROM (This User’s manual) Carrying case Contact your dealer immediately if any ite[...]

DLP ® Projector – User’s Manual Views of Projector Parts Front-right View Item Label Description See page: 1. Ventilation opening To keep the projector lamp cool 2. Height-adjuster button Push to release height adjuster 3. Height adjuster Adjusts level of projector 15 4. Lens cap Covers lens to protect when not in use 5. IR receiver Receiver f[...]

DLP ® Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs Item Label Description See page: 1. (Power) Turns the projector On or Off 11 2. ▲ (Up cursor) Navigates and changes settings in the OSD 18 Green Power On Off Power Off (AC Off) 3. Power LED Flashing Error code On System over temperature 4. Over Temp LED Off N[...]

DLP ® Projector – User’s Manual Rear view Item Label Description See page: 1. AC IN Connect the power cable 11 2. USB (Service Only) Connect the USB cable from a computer (service only) 3. AUDIO Connect the AUDIO CABLE from the input device 4. S-VIDEO Connect the S-VIDEO CABLE from a video device 5. VIDEO Connect the VIDEO CABLE from a video d[...]

DLP ® Projector – User’s Manual — 5 — Bottom view Item Label Description See page: 1. Lamp cover Remove when changing the lamp. 35 2. Height adjustor Adjuster drops down when adjuster button is pushed. 15 3. Lens cap hook To fasten the lens cap cover. 4. Tilt adjustor Rotate adjuster lever to adjust angle position. 15 5. Ceiling support ho[...]

DLP ® Projector – User’s Manual Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting tur ned on. Certain high-frequency fluores- cent lights can disrupt re mote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control a[...]

DLP ® Projector – User’s Manual — 7 — Item Label Description See page: 1. Up cursor Navigates and changes settings in the OSD 2. Enter Changes settings in the OSD 18 3. Power Turns the projector On or Off 11 4. Right cursor Navigates and changes settings in the OSD 18 5. Volume + Increase volume 6. Volume - Decrease volume 17 7. Mute Mutes[...]

DLP ® Projector – User’s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you ar e not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well within a radi [...]

– 9 – Setup and Operation Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the di- rection of the arrow (A). Pull out the cover (B). 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use a 3V lithium battery (CR2025). 2. Dispose of used batteries [...]

DLP ® Projector – User’s Manual Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output [...]

DLP ® Projector – User’s Manual Starting and Shutting down the Projector 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The Power and Ready LEDs on the projector light. 2. Turn on the connected devices. 3. Ensure the Ready LED displays a solid orange and not a flashing or- ange. Then press the Power button [...]

DLP ® Projector – User’s Manual 5. When the “Power Off? /Press Power again” message appears, press the Power button. The projec- tor turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the Ready LED stops flashing–indica ting the projector has cooled down. – 12 –[...]

DLP ® Projector – User’s Manual Setting an Access Password (Security Lock) You can use the four (arrow) buttons to set a password and prevent unauthoriz ed use of the projec- tor. When enabled, the password must be enter ed after you power on the projector. (See Navigating the OSD on page 18 and Setting the OSD Language on page 19 for help on [...]

DLP ® Projector – User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. Push the Menu button to exit the dialog box. 6. The password[...]

DLP ® Projector – User’s Manual Adjusting the Projector Level Take note of the following w hen setting up the projector: • The projector table or st and should be level and sturdy . • Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. Y ou could trip over them . 1. To raise the l[...]

DLP ® Projector – User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size B . 2. Use the Image-focus control (on the projector only) to sharpen the projected image A . Remote control and OSD panel 3. The keystone control appears on the display. ?[...]

DLP ® Projector – User’s Manual Adjusting the Volume 1. Press the Volume +/- buttons on the remote control. The volume control appears on the display. 2. Press the Left or Right Cursor buttons on the keypad to adjust Vol- ume +/- . 3. Press the Mute button to turn off the volume (This feature is avail- able only on the remote). – 17 –[...]

DLP ® Projector – User’s Manual – 18 – On-Screen Display (OSD) Menu Settings OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and change various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The [...]

DLP ® Projector – User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the Menu button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor ◄► button until the language you want is highlighte[...]

DLP ® Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. – 20 –[...]

DLP ® Projector – User’s Manual OSD Sub-Menu Overview – 21 –[...]

DLP ® Projector – User’s Manual Image Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. Item Description Display Mode Press the cursor ◄► button to set the Display Mode.[...]

DLP ® Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu. Item Description Color Space Press the cursor ◄► button to adjust the color space[...]

DLP ® Projector – User’s Manual Color Manager Press (Enter) / ► to enter the Color Manager sub menu. Item Description Red Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Green Select to enter the Green Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Blu[...]

DLP ® Projector – User’s Manual Computer Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the Computer menu. Press ◄► to change values for settings. Item Description Horizontal Position Press the cursor ◄► button to adju[...]

DLP ® Projector – User’s Manual Video/Audio Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. Item Description Video AGC Press the ◄► buttons to enable or dis[...]

DLP ® Projector – User’s Manual Audio Press Enter / ► to enter the audio submenu. Item Description Volume Press the ◄► buttons to adjust the audio volume. (Range: 0~8) Mute Press the ◄► buttons to turn on or off the speaker. – 27 –[...]

DLP ® Projector – User’s Manual Installation I Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄► to change values for settings. Item Description Language Press the cursor ◄► button [...]

DLP ® Projector – User’s Manual Installation II Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. Press ◄► to change values for settings. Item Description Auto Source Press the cursor ◄► b[...]

DLP ® Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu. Press ◄► to change values for settings. Item Description OSD Menu Set- [...]

DLP ® Projector – User’s Manual OSD Menu Setting Item Description Menu Position Press ◄► button to select different OSD location. Translucent Menu Press ◄► button to select OSD background translucent level. Menu Display Press ◄► button to select OSD timeout delay. – 31 –[...]

DLP ® Projector – User’s Manual Peripheral Test Item Description Remote Control Test Press (Enter) / ► and follow the on-screen prompts to carry out the Remote Control Test. Press the Menu button twice to return to the Peripheral Test menu. USB Test Press (Enter) / ► and follow on-screen prompts to carry out the USB Test. Press the Menu bu[...]

DLP ® Projector – User’s Manual Lamp Hour Reset Please refer to Resetting the Lamp on page 38 to reset the lamp hour counter. – 33 –[...]

DLP ® Projector – User’s Manual Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values (expect Language and Security Lock). Status Press the cursor ▲▼ button to move up and down in the I[...]

– 35 – Maintenance and Security Replacing the Projection Lamp The projection lamp should be repl aced when it burns out. It should onl y be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this produc t contains a small amount of mercury. b. Do not dispose this pro[...]

DLP ® Projector – User’s Manual 3. Remove the two screws from the lamp module (A) . 4. Lift the module handle up (B) . 5. Pull firmly on the module handle to remove the lamp module. – 36 –[...]

DLP Projector – User’s Manual ® 6. Reverse steps 1 to 5 to install the new lamp mod- ule. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected prop- erly before tightening the screws. – 37 –[...]

DLP ® Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the Menu button to open the OSD menu. 2. Press the cursor ◄► button to move to the Installation II menu. Press the cursor button to move down to Advanced . 3. Press the cursor ▼▲ [...]

DLP ® Projector – User’s Manual – 39 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do [...]

DLP ® Projector – User’s Manual Using the Kensington® Lock If you are concerned about security, attach the proj ector to a permanent objec t with the Kensington slot and a security cable. Note: Contact your vendor for details on purchas ing a suitable Kensi ngton security cable. The security lock corresponds to Kensington’s Mi croSaver Secu[...]

– 41 – Troubleshooting Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooti ng, the problem is traced to some thing as simple as a loose con- nection. Check the foll[...]

DLP ® Projector – User’s Manual – 42 – LED Error Messages Error Code Messages Power LED Blink Over Temp LED Ready LED Blink Over temperature 0 ON 0 Thermal break status error 4 0 0 Lamp error 5 0 0 Fan1 error 6 0 1 Fan2 error 6 0 2 Fan3 error 6 0 3 Lamp door open 7 0 0 DMD error 8 0 0 Color wheel error 9 0 0 In the event of an error, pleas[...]

DLP ® Projector – User’s Manual – 43 – Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is securely connected. 2. Ensure the power source is good by te sting with another electrical device. 3. Restart the projector in the correct order and check that the Power LED is green. 4. If you have replaced t[...]

DLP ® Projector – User’s Manual – 44 – Specifications Input Connectors VGA PC USB (service only) Composite video (RCAx1) Video S-Video (Mini-DIN) Audio Mini-jack Security Kensington slot Projection Distance vs. Projection Size Projection Distance and Size Table PR6022 Tele Wide m 1.34 3.58 4.47 8.94 1.54 3.09 3.86 11.58 Distance feet 52.76[...]

DLP ® Projector – User’s Manual – 45 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Signal Resolution H-Sync (KHz) V-Sync (Hz) Composite / S-Video Component RGB NTSC — 15.734 60.0 O — — PAL/SECAM — 15.625 50.0 O — — 640 x 35[...]

DLP ® Projector – User’s Manual – 46 – Signal Resolution H-Sync (KHz) V-Sync (Hz) Composite / S-Video Component RGB 640 x 480 35.0 66.68 — — O 832 x 624 49.725 74.55 — — O 1024 x 768 60.24 75.0 — — O Apple Mac 1152 x 870 68.68 75.06 — — O 480i 15.734 60 — O — SDTV 576i 15.625 50 — O — 480p 31.469 60 — O — EDTV 5[...]

DLP ® Projector – User’s Manual Projector Dimensions – 47 –[...]

– 48 – Regulatory Compliance FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to prov ide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gen[...]

Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support 24/7 Technical Support © 2008 Planar Systems, Inc. Planar is a regi stered[...]