Planar PR3010 manuale d’uso

[...]

User’s Manual — i — Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT[...]

Preface – ii – Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright June, 2006 Disclaimer The informatio[...]

DLP®Projector – User’s Manual — i ii — Important Safety Information Congratulations on purchasing the Planar DLP® projector! Important: It is strongly recommended that you read this secti on carefully before using the projector. These safety and usage instructions will ens ure that you enjoy many years of safe use of the projector. Keep t[...]

Preface Power Safety  Only use the supplied power cord.  Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.  Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardou s if done incorrec tly[...]

DLP®Projector – User’s Manual Main Features • Lightweight unit, easy to pack away and transport • Compatible with all major video st andards including NTSC, P AL, and SECAM • A high brightness rating allows for presentations in daylight or in lit rooms • Supports resolutions up to SXGA+ at 16.7 milli on colors to deliver crisp, clear i[...]

Preface – vi – Table of contents Getting Started ......................................................................................................................................................1 Packing Checklist ...............................................................................................................................[...]

DLP®Projector – User’s Manual — vii — PR5020 Projection distan ce and size table ...................................................................................................45 .................................................................................................. .........47 ...............................................[...]

– 1 – Getting Started Packing Checklist Carefully unpack the projector and check that the following items are included: DLP® projector Remote control (with two AAA batteries) Power cord USB cable (USB type A-to-B USB) Composite video cable (RCA 3-to-RCA 3) Computer cable (VGA-VGA) Audio cable (mini jack-to-mini jack) CD-ROM (This User’s manu[...]

DLP®Projector – User’s Manual Views of Projector Parts Front-right View Item Label Description See page: 1. Focus Focuses the projected image 19 2. Lens zoom Enlarges the projected image 19 3. Screws Holds lamp to projector 4. See “Top view—OSD buttons and LEDs” 3 5. Front IR receiver Receiver for IR signal from remote control 8 6. Lens [...]

DLP® Projector – User’s Manual – 3 – Item Label Description See page: 8. Height-adjuster but- ton Push to release height adjuster 18 Important: Ventilation openings on the projector a llow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the ventilation openings. Top view—On-screen Display (OSD) butto[...]

DLP®Projector – User’s Manual – 4 – Item Label Description See page: 6. Enter Changes settings in the OSD 2 1 7. VOL+/ Right cursor Increases volume Navigates and changes settings in the OSD 2 1 8. Auto Optimizes image size, position, and resolution Navigates and changes settings in the OSD 9. Menu Opens and exits the OSD 10. Source Detect[...]

DLP® Projector – User’s Manual Rear view Item Label Description See page: 1. Rear IR receiver Receiver for IR signal from remote control 8 2. DVI-D (For PR5020 only) Connect a DVI-D cable (not supplied) from a com- puter 3. VGA IN Connect a VGA cable (supplied) from a computer 4. VGA OUT Connect to a monitor (not supplied) 5. S-video Connect t[...]

DLP®Projector – User’s Manual – 6 – Item Label Description See page: 13. Power Connect the power cord (supplied) 14 14. Security Lock Secure to permanent object with a Kensington® Lock system 39 Note: If your video equipment has both S-video and RCA jacks (composite video) connect to the S-video connector. S-video provides a better qualit[...]

DLP® Projector – User’s Manual – 7 – 4. Tilt adjuster Adjust angle of the picture[...]

DLP®Projector – User’s Manual Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting tur ned on. Certain high-frequency fluores- cent lights can disrupt re mote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and[...]

DLP® Projector – User’s Manual – 9 – Item Label Description See page: 8. Right cursor 9. Down cursor 10. Volume +/- Adjusts volume 2 1 11. Mute Mutes the built-in speaker 20 12. Zoom+ Zoom in 13. Zoom- Zoom out 14. Freeze Freeze/unfreezes the on-screen picture 15. Blank Makes the screen blank 16. Source Detects the input device 17. Auto Au[...]

DLP®Projector – User’s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you ar e not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well within a radi us[...]

– 11 – Setup and Operation Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the di- rection of the arrow. 2. Insert the supplied batteries taking note of the polarity (+/-) as shown here. 3. Replace the cover. Caution: 1. Only use AAA batteries.(Alkaline is better) 2. Dispose of used batteri[...]

DLP®Projector – User’s Manual Connecting Input Devices A PC or notebook computer as we ll as video devices can be connected to the proj ector at the same time. Video devices include DVD, VCD, and VHS play ers, as well as movie camcorders and digital still cameras. Check the user manual of the connecti ng device to confirm it has the appropriat[...]

DLP® Projector – User’s Manual – 13 – Item Label Description RS-232 (For PR5020 only) Reserved for installation control. Warning: As a safety precaution, disconnect all power to the projector and connecti ng devices before making connections.[...]

DLP® Projector – User’s Manual – 1 4 – Starting and Shutting down the Projector 1. Slide the lens cover. 2. Connect the power cord to the projector [A] Connect the other end to a wall out- let. Switch [B] from on (O) to off ( — ) 3. The POWER and READY LEDs on the projector turn on. Turn on the connected devices. 4. Ensure the Ready LED [...]

DLP® Projector – User’s Manual 7. When the “Power Off?/Press Power again” message appears, press the Power button. The projector turns off. 8. Turn off the main Power switch when the Ready LED stops flashing. Caution: Do not unplug the power cord until the Ready LED st ops flashing, indicating the projector has cooled down. – 15 –[...]

DLP®Projector – User’s Manual Setting an Access Password (Security Lock) You can use the cursor (arrow) buttons to se t a password and prevent unauthorized use of the pro- jector. When enabled, the password must be enter ed after you power on the projector. (See “Navigating the OSD” on page 21 and “Setting the OSD Language” on page 22 [...]

DLP® Projector – User’s Manual Every time you start the projector, a password dialog box appears. Enter the password in the order you set it at step 6. (Press the Menu button to cancel if you enter the wrong password.) – 17 –[...]

DLP®Projector – User’s Manual Adjusting the Projector Level Take note of the following w hen setting up the projector: • The projector table or st and should be level and sturdy . • Position the projector so that it is perpendicular to the screen. • Be sure cables are not in the way or can cause the projector to be knocked over . 1. To r[...]

DLP® Projector – User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size. B 2. Use the Image-focus control (on the projector only) to sharpen the projected image A . 3. Press the Keystone button on the remote control. The keystone control appears[...]

DLP®Projector – User’s Manual 3. Press the Mute button to turn off the volume. (For remote only) – 20 –[...]

DLP® Projector – User’s Manual – 21 – On-Screen Display (OSD) Menu Settings OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and change various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The f[...]

DLP®Projector – User’s Manual Setting the OSD Language You may want to reference the OSD on your projec tor while reading this section. Set the OSD lan- guage to your preference before conti nuing. (The default l anguage is English.) 1. Press the Menu button. The Main menu appears. 2. Press the cursor button until Tool is highlighted. 3. Press[...]

DLP® Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. – 23 –[...]

DLP®Projector – User’s Manual Main Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Main menu. Press the cursor button to move up and down in the Main menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Brightness Press the cursor button [...]

DLP® Projector – User’s Manual – 25 – Item Description Default Color Space Press the cursor button to adjust the color space. (Range: Auto – RGB – YPbPr- YCbCr) Auto Reset Resets all Main settings to default values — Main Menu Functions Available for Connected Source Function RGB DVI Component Video Composite Video S-video Brightness[...]

DLP®Projector – User’s Manual Setup Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup menu. Press the cursor button to move up and down in the Setup menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Horizontal Position Press the cu[...]

DLP® Projector – User’s Manual – 27 – Function RGB DVI Component Video Composite Video S-video Reset x x x x x x = available to video source Advance Feature Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move up and down in the Advanc[...]

DLP®Projector – User’s Manual – 28 – Item Description Default Fan Speed Press the cursor button to toggle between normal and high fan speed Set Fan Speed to High in altitudes over 1500 meters (5000 feet). Normal Security Lock Press the cursor button to enable or disable Security Lock. When you enable Security Lock a Register Password dialo[...]

DLP® Projector – User’s Manual User Color Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for settings, and then pres[...]

DLP®Projector – User’s Manual Config Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Config menu. Press the cursor button to move up and down in the Config menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Blank Screen Press the curso[...]

DLP® Projector – User’s Manual Utility Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Utility menu. Press the cursor button to move up and down in the Utility menu. Press to change values for settings, and then press Enter or to confirm the new setting. Item Description Default Video Type Press the cur[...]

DLP®Projector – User’s Manual – 32 – Item Description Default Digital Zoom Digital operation for zoom and pan adjustment. Press Enter or . The Zoom menu appears. Press to zoom in; press to zoom out. Press Enter or to open the Pan menu. (You must zoom in be- fore you can open the Pan menu.) Use the cursor buttons to pan the zoomed image. Pr[...]

DLP® Projector – User’s Manual Tool Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Tool menu. Press the cursor button to move up and down in the Tool menu. Press Enter or to con- firm the new setting. Item Description Default Language Press the cursor to select the desired lan- guage English Remote con[...]

DLP®Projector – User’s Manual Status Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and down in the Status menu. Item Description Default Video Information Displays the resolution and refresh rate for RGB/DVI mode. Displays the color standard for video mo[...]

– 35 – Maintenance and Security Replacing the Projection Lamp The projection lamp should be repl aced when it burns out. It should onl y be replaced with a certified replacement part, which you can order from your local dealer. Important: 1. The lamp contains a certain am ount of mercury and should be dispos ed of according to local ordi- nance[...]

DLP®Projector – User’s Manual 2. Open the lamp com- partment cover ( B ). B 3. Remove the two screws from the lamp module ( C ). 4. Lift the module handle up ( D ). – 36 –[...]

DLP® Projector – User’s Manual 5. Pull firmly on the module handle to re- move the lamp module ( D ) D 6. Reverse steps 1 to 5 to install the new lamp module. – 37 –[...]

DLP®Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the Menu button to open the Main menu. 2. Press the cursor button to move to the Status menu. 3. Press the cursor button to move down to Lamp Hour Reset . 4. Press the cursor or Enter butto[...]

DLP® Projector – User’s Manual 1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.) 2. Lightly wipe the lens in a circular motion. Caution: 1. Do not use abrasive cleaners or solvents. 2. To prevent discoloration or fading, av oid getting cleaner on the projector case. Cleaning the Case R[...]

– 40 – Troubleshooting Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooti ng, the problem is traced to some thing as simple as a loose con- nection. Check the foll[...]

DLP® Projector – User’s Manual – 41 – LED Error Messages Error code message Pow er LED/flashes Ready LED/flashes Lamp usage task created error 2 1 Environment usage task created error 2 2 Thermal break status error 3 0 T1 temperature over temperature 3 1 T1 sensor status fail 4 1 Lamp lit error 5 1 Ballast SCI error 5 2 Ballast UART error [...]

DLP®Projector – User’s Manual – 42 – 2. To ensure the problem is not caused by a connected PC’ s video card, conn ect to another computer. Problem: The image is flat with no contrast Adjust the Contrast setting on the Main menu of the OSD. Problem: The color of the projected image does not match the source image. Adjust the Color Tempera[...]

– 43 – Specifications Input/output connectors PR3010 PR3020 PR5020 × × DVI-D Data in RGB HD-15 Data out RGB HD-15 composite video (RCAx1) Video S-video Stereo RCAx2 (L+R) Audio in Stereo Mini-jack Audio out Stereo Mini-jack × × RS-232 Control USB Security Kensington lock[...]

DLP®Projector – User’s Manual Projection Distance V. S. Projection Size A B C D L Projection Distance PR3020 and PR3010 Projection distance and size table Max. Screen Size (Wide) 1.89 Max. Screen Size (Tele) 2.18 Projection Distance L Diagonal Width A Height C Diagonal W idth B Height D 1.00 m 0.66 m 0.53 m 0.40 m 0.57 m 0.46 m 0.34 m 3.28 &ap[...]

DLP® Projector – User’s Manual – 45 – 32.80 ' 260.38 '' 208.31 '' 156.23 '' 225.75 '' 180.60 '' 135.45 '' PR5020 Projection distance and size table Max. Screen Size (Wide) 1.8 Max. Screen Size (Tele) 2.1 Projection Distance L Diagonal Width A Height C Diagonal W idth B Height[...]

DLP®Projector – User’s Manual – 46 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Signal Resolution Frequency H. (KHz) Frequency V. (Hz) Video Digital Analog NTSC － 15.734 60.0 Ο － － PAL/SECAM － 15.625 50.0 Ο － － 640 x 350[...]

DLP® Projector – User’s Manual Projector Dimensions 300 mm(1 1.8") 96 mm(3.8") 244 mm(9.6") – 47 –[...]

– 48 – Regulatory Compliance FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to prov ide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gen[...]

Planar Systems, Inc. Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar.com Online Technical Library: http://www.planar.com/support Hours: M-F, 8am - 8pm ET, 12pm - 12am GMT © 2006 Planar Systems, Inc. Plan[...]