Planet Technology FGSW-2612PVS manuale d’uso

24-Port 10/100Mbps with 2-Gigabit Web Smart PoE Switch FGSW-2620PVS/FGSW-2612PVS User’s Manual - 1 -[...]

- 2 - Trademarks Copyright © PLANET Technology Corp. 2006. Contents subject to revisi on w ithout prior notice. PLANET is a registered trademark of PLANET T echnology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardw are will w o rk properly in all env ironments and applicati[...]

- 3 - TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................................................................... 4 1.1 C HECKLIST .................................................................................................................................................. 4 1.2 A[...]

- 4 - 1. INTRODUCTION 1.1 Checklist Check the contents of your packag e for follow ing parts: z FGSW-2620PVS or FGSW-2612PVS x1 z User's manual CD x1 z Quick installation guide x1 z Power cord x 1 z Rubber feet x 4 z Rack mount accessory x 1 If any of these pieces are missing or dam aged, please contact y our dealer immediately, if possible, r[...]

- 5 - 1.3 Features ◆ Complies with the IEEE 802.3, IEEE 802.3u, I EEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard ◆  24-Port 10/100Mbps Fast Ethernet Switch ◆  2-Port Gigabit TP/SFP combo ports ◆ 12-Port PoE( FGSW-2612PVS) and 24-Port PoE( FGSW-2620PVS) ◆ Each Switching ports support auto- negotiation-10/20, 100/ 200Mbps suppo[...]

- 6 - PoE power Consumption / Dissipation 260 Watts maximum / 887 BTU/hr maximum 130 Watts maximum / 443 BTU/hr maxi- mum Temperature Operating: 0~50 degree C, Storage -40~70 degree C Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing) Smart function System Configuration Web interface Port Status Display per port’s disable/enable [...]

- 7 - 2. HARDWARE DESCRIPTION This product provides three differ ent running speeds – 10Mbps, 100Mbps and 1000M bps in the same Web Smart PoE Switch and automatically distinguis hes the speed of incoming connection. This section describes the hardware f eatures of Web Smart PoE Sw itch. For easier management and c ontrol of the Web Smart PoE Swit[...]

- 8 - # Notice: 1. Press the RESET button once. The Web Sm art PoE Switch will reboot automatically . 2. Press the RESET button for 5 seconds. The Web Smart Po E Switch w ill back to the fa ctory default mode; the entire configuration will be erased. 3. The 2 Gigabit TP/SFP combo ports are shared with port 25/26 of Web Smart PoE Switch. Eit her of [...]

- 9 - When the Web Smart PoE Switch receives pow er, the Power LED should remain solid Green. 2.3.2 As a department / w orkgroup PoE Sw itch Providing up to 12 / 24 PoE, in -line power interface, the Web Smart PoE Sw itch can easily build a pow er central-controlled IP phone system, IP Camera system, AP gr oup for the enterprise. For instance, 12 /[...]

- 10 - Step 5: After the brackets are attached to the Web Smart PoE Sw itch, use suitable screw s to securely attach the brackets to the rack, as shown in Figure 2-7 . Figure 2-7 Mounting the Web Smart PoE Switch in a Rack Step 6: Proceed with the st eps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and supply p[...]

- 11 - 3. SWITCH MANAGEMENT This chapter describes how to manage the Web Smart PoE Sw itch. T opics include: - Overview - Management method - Logging on to the Web Smart PoE Switch 3.1 Overview The Web Smart PoE Switch provides a user-friendly, w eb interf ace. Using this interface, you can perform various switch configuration and management activi[...]

- 12 - 4. WEB MANAGEMENT To modify your PC’s IP domain to the same with Web Smart PoE Switch then use the default IP address ( 192.168.0.100 ) to remote configure Web Smart PoE Switch through the Web interface. # Notice: The following section w ill base on the w eb screens of FGSW-2620PVS, for FGSW-2612PVS the display w ill be the same to FGSW-26[...]

- 13 - Figure 4-2 Web main menu screen 4-2 Port Status This section provides current status of each port from Web Smart PoE Switch, the screen in Figure 4-3 appears and table 4-1 describes the port status obj ects of Web Smart PoE Switch. Figure 4-3 Port Status Web Page screen[...]

- 14 - Object Description Port Indicate port 1 to port 26. Enable Display the port Disable or Enable state of each port on Web Smart PoE Switch. Link Status The state of the link, indicati ng a valid link partner device. "Up" means a device is successful con- nected to the port. “Down” means no device is connected. Spd/Dpx Display the[...]

- 15 - Figure 4-5 Port Configuration Web Page screen Object Description Port Indicate port 1 to port 26. Enable Per port Disable or Enable on Web Smart PoE Switch. Au t o Per port Disable (Off) or enable (On) Auto negotiation on Web Smart PoE Sw itch. Spd/Dpx Adjust per port speed duplex mode on Web Smar t PoE Switch; the available options are A ut[...]

- 16 - 4-4 Trunk configuration This function allows to configuring the trunk function. It provides up to 7 trunk groups and each trunk group provides 2 to 8 member ports. Please check the member port from “Normal” to 7 trunk groups and the screen in Figure 4-6 & 4-7 appears. Figure 4-6 Trunk Configuration Web Page screen Figure 4-7 Trunk Co[...]

- 17 - Figure 4-8 Trunk Configuration Web Page screen Please press “Back” for return to Trunk configuration screen for further configuration. If the member port from each trunk group is out of range or less than 2 ports than the follow ing screen appears. Figure 4-9 Trunk Configuration Web Page screen Please press “Back” for return to Trunk[...]

- 18 - 4-5 VLAN configuration A Virtual LAN (VLAN) is a logical network grouping that limits t he broadcast domain. It allows y ou to isolate network traffic s o only members of the VLAN receive traffic from the same VLAN members. The Web Smart PoE Switch supports 26 port-based VLAN groups. In the default configur ation wi th VLAN disable, the scre[...]

- 19 - Figure 4-11 Port-based VLAN Setting Web Page screen Press “Relogin” to re-login the Web Smart PoE Switch and the screen in Figure 4-12 appears. Figure 4-12 Port-based VLAN Setting Web Page screen After login web interface of Web Smart PoE Sw it ch and choose VLAN confi guration, the screen in Figure 4-13 appears. Figure 4-13 Port-based V[...]

- 20 - Press “A ddNew” button to add a port-based VLAN group and setup procedure is shown as below: 1. Input a VLAN group ID and available range is 1-4094 . 2. Select specific port as member port and the screen in Figure 4-14 appears. 3. After setup completed, please press “A pply” button to take effect and the screen in Figure 4-15 appears[...]

- 21 - Figure 4-15 Port-based VLAN Setting Web Page screen Figure 4-16 Port-based VLAN Setting Web Page screen[...]

- 22 - 4.5.2 Edit existence port-based VLAN group Click existence VLA N group ID to edit existence port-based VLAN group, the edit procedure is show n as below: 1. Select specific port as member port and the screen in Figure 4-17 appears. 2. After setup completed, please press “A pply” button to take effect and the screen in Figure 4-18 appears[...]

- 23 - 4.5.3 Delete existence port-based VLAN group The port-based VLAN group delete procedure is shown as below : 1. Check existence VLA N group ID and the screen in Figure 4-19 appears. 2. Press “Delete” button to delete existenc e port-based VLAN group. 3. Then the “Delete all checked groups” window appears, please press “OK” to cont[...]

- 24 - Figure 4-20 Delete Port-based VLAN group Web Page screen Figure 4-21 Delete Port-based VLAN group Web Page screen[...]

- 25 - Figure 4-22 Port-based VLAN group Web Page screen 4.5.4 Disable port-based VLAN function Select “Disable” and pop window appears, press “OK” to disable the port-based VLAN function then the Web Smart PoE Switch w ill reboot for take affect. T he screen in Figure 4-23 to 4-27 appears. Figure 4-23 Disable Port-based VLAN function Web P[...]

- 26 - Figure 4-24 Disable Port-based VLAN function Web Page screen Figure 4-25 Disable Port-based VLAN function Web Page screen[...]

- 27 - Figure 4-26 Disable Port-based VLAN function Web Page screen Figure 4-27 Disable Port-based VLAN function Web Page screen[...]

- 28 - 4-6 Port Monitoring This function provide to monitoring network traffic that forw ards a copy of each incoming or outgoing packet from one port of a network Sw itch to another port where the packet can be st udied. It enables the manager to keep close track of sw itch performance and alter it if necessary. The screen in Figure 4-28 appears a[...]

- 29 - 4-7 QoS Configuration This function provides QoS Configurati on of Web Smart PoE Switch, the screen in Figure 4-29 appears and table 4-4 de- scribes the QoS Configuration obj ects of Web Smart PoE Switch. Figure 4-29 QoS Configuration Web Page screen Object Description QoS Mode Provide different modes for QoS Configuration, the available opt[...]

- 30 - Figure 4-30 QoS Configuration Web Page screen Figure 4-31 QoS Configuration Web Page screen[...]

- 31 - Figure 4-32 QoS Configuration Web Page screen[...]

- 32 - 4-8 Port counters This function could provide you with an i ndividual statistical counter; it is a usef ul page for administrator to monitor each port’s usage condition. Also, it is helpful to troubleshooting netw ork problems. T he screen in Figure 4-33 & 4-34 appears. Figure 4-33 Port Counters Web Page screen Figure 4-34 Port Counter[...]

- 33 - 4-9 Access Control List The Access Control List ( AC L ) is a concept in computer security used to enforce privilege separation . It is a means of determining the appropriate access rights to a given object depending on certain aspects of the process that is making the request, principally the process's user identifier. A ccess Control [...]

- 34 - Figure 4-36 Access Control List (ACL) Web Page screen Figure 4-37 Access Control List (ACL) Web Page screen[...]

- 35 - Figure 4-38 Access Control List (ACL) Web Page screen Figure 4-39 Access Control List (ACL) Web Page screen[...]

- 36 - Figure 4-40 Access Control List (ACL) Web Page screen Figure 4-41 Access Control List (ACL) Web Page screen[...]

- 37 - Figure 4-42 Access Control List (ACL) Web Page screen Figure 4-43 Access Control List (ACL) Web Page screen[...]

- 38 - Figure 4-44 Access Control List (ACL) Web Page screen Figure 4-45 Access Control List (ACL) Web Page screen[...]

- 39 - Figure 4-46 Access Control List (ACL) Web Page screen Figure 4-47 Access Control List (ACL) Web Page screen[...]

- 40 - Figure 4-48 Access Control List (ACL) Web Page screen Figure 4-49 Access Control List (ACL) Web Page screen[...]

- 41 - 4-10 Web Smart Function This function could provide you to define device indicate connect to each port on Web Smart PoE Switch, the screen in Figure 4-50 appears. Figure 4-50 Web Smart Funciton W eb Page screen The available options are shown as below : 1. PC 2. PC+Voip 3. Sw itch 4. Router 5. A P 6. Server 7. Printer 8. Guest 9. Other The s[...]

- 42 - Figure 4-51 Web Smart Funciton W eb Page screen Figure 4-52 Web Smart Funciton W eb Page screen[...]

- 43 - Figure 4-53 Web Smart Funciton W eb Page screen This function also provides Apply for all ports option from Select a port function, the setup procedure shown as below: 1. Choose a device and check “Apply for all ports” from options of Select a port function, the screen in Figure 4-54 appears. 2. Check any port then all port w ill be sele[...]

- 44 - Figure 4-54 Web Smart Funciton W eb Page screen Figure 4-55 Web Smart Funciton W eb Page screen[...]

- 45 - Figure 4-56 Web Smart Funciton W eb Page screen Figure 4-57 Web Smart Funciton W eb Page screen[...]

- 46 - 4-11 Misc Operation This section provide Misc Operation of Web Smart PoE Switch, the screen in Figure 4-58 appears and table 4-6 describes the Misc Operation objects of Web Smart PoE Switch. Figure 4-58 Misc Operation Web Page screen Object Description Switch Configuration Provide Advanced Switch Configuration and av ailable o ptions are Bro[...]

- 47 - 4.11.1 Switch Configuration Choose Switch Configuration from Misc Operat ion of Web Smart PoE Sw itch( please see the Figure 4-58) , the screen in Figure 4-59 appears and table 4-7 describes the Swit ch Configuration objects from Misc Operation of Web Smart PoE Switch. Figure 4-59 Switch Configuration Web Page screen O bject Description Broa[...]

- 48 - Figure 4-60 Switch Configuration Web Page screen Figure 4-61 Switch Configuration Web Page screen[...]

- 49 - Figure 4-62 Switch Configuration Web Page screen Figure 4-63 Switch Configuration Web Page screen[...]

- 50 - 4.11.2 TFTP Firmware Upgrade This section provides Firmware upgrade through TFTP method on Web Smart PoE Switch, the screen in Figure 4-64 ap- pears. Figure 4-64 T FTP Firmware Update Web Page screen[...]

- 51 - 4.11.3 Password Setting This section provides password setting of Web Smart PoE Sw itch, the screen in Figure 4-65 appears and table 4-8 describes the Password Setting objects on Web Smart PoE Sw itch. Figure 4-65 Password Setting Web Page screen Object Description Passw ord Pro- tection Provide Password protection function” Disable” or?[...]

- 52 - 4.11.4 IP Configuration This section provides IP Confi guration on Web Smart PoE Switch; the screen in Figure 4-66 appears and tables 4-9 de- scribes the IP Configuration objec ts of Web Smart PoE Switch . Figure 4-66 IP Configuration Web Page screen Object Description MAC A ddress Display MAC address on Web Smart PoE Switch. IP A ddress Pro[...]

- 53 - 4.11.5 Factory Default This section provides Factory Default function on Web Smart PoE Switch, after choose this function and the following screen appears in Figure 4-67. Please press “OK” button to take effect and the switch w ill reset to factory default mode and ask y ou to waiting rebooting around 10 sec, press “OK” button to re-[...]

- 54 - Figure 4-69 Factory Default Web Page screen Figure 4-70 Factory Default Web Page screen[...]

- 55 - 4.11.6 Reboot System This section provides Reboot function on Web Smart PoE Switch, after choose this function and the follow ing screen ap- pears in Figure 4-71. Please press “OK” button to take effect and the switch w ill reboot and ask you to waiting rebooting around 10 sec, press “OK” button to re-login the Web Smart PoE Switch. [...]

- 56 - Figure 4-73 Reboot Web Page screen Figure 4-74 Reboot Web Page screen[...]

- 57 - 4.11.7 System Information This section display system information on Web Smart Po E Sw itch, after choose this function and the following screen appears in Figure 4-75. Figure 4-75 System Information Web Page screen[...]

- 58 - 4-12 PoE Configuration This section provides PoE Configurati on of Web Smart PoE Switch, the screen in Figure 4-76 appears and table 4-10 de- scribes the PoE Configuration obj ects of Web Smart PoE Switch. Figure 4-76 PoE Configuration Web Page screen Object Description POE Ports Config This function provide per POE ports configuration . Ple[...]

- 59 - 4.12.1 POE Ports Config This section provide ” Disable” or ” Enable” and 0-11 priority assign on per PoE port of Web Smart PoE Switch ; the screen in Figure 4-77 & 4-78 appears. Table 4-11 describes the PO E Ports Configuration objects fr om PoE Configuration of Web Smart PoE Switch. Figure 4-77 POE Ports Configuration Web Page s[...]

- 60 - Table 4-11 Descriptions of the POE Port s Configuration screen Objects 4.12.2 POE Port Status This function allows view ing per PoE port status, such as” Disable” or” Enable , power in mW and current in mA unit, the screen in Figure 4-79 appears. Table 4-12 describes the PO E Ports Status objects from Po E Configuration of Web Smart Po[...]

- 61 - 4-13 Logout This section provide web logout func tion on Web Smart PoE Sw itch, after choose this function and the following screen appears in Figure 4-80. Please press “OK” button to take effect and Logout pop window appears, press “OK” button to re-login the Web Smart PoE Switch. The screen in Figure 4-81 & 4-82 & 4-83 appe[...]

- 62 - Figure 4-81 Logout Web Page screen Figure 4-82 Logout Web Page screen[...]

- 63 - Figure 4-83 Logout Web Page screen[...]

- 64 - 5. SWITCH OPERATION 5.1 Address Table The Switch is implemented w ith an address table. T his address table composed of many entries. Each entry is used to store the address information of some node in network, incl uding MAC address, port no, etc. This information comes from the learning proce ss of Ethernet Switch. 5.2 Learning When one pa[...]

- 65 - 6. TROUBLESHOOTING This chapter contains information to hel p you solve problems. If the Switch is not functioning properly, make sure the Ethernet Switch w as set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remo ve duplex mode of the Switch. Some st ations cannot t alk to oth[...]

- 66 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assig nment Contact MDI Media Dependant Interface MDI-X Medi[...]

- 67 - There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following show s the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cables are w ith same pin assignment and color as abov e picture before deploy ing the[...]