Planet FGSW-1820CS manuale d’uso

User's Manual FGSW-1820CS FGSW-2620CS 16/24-Port 10/100Mbps with 2 Gigabit TP / SFP Combo Web Smart Switch - 1 -[...]

- 2 - Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to revisi on w ithout prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardw are will w ork properly in all environments and applications[...]

- 3 - TABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................................................................... 4 1.1 C HECKLIST ..............................................................................................................................................[...]

- 4 - 1. INTRODUCTION 1.1 Checklist Check the contents of your p ackag e for follow ing parts: z FGSW-1820CS or FGSW-2620CS x1 z Quick Installation Guide x1 z User's manual CD x1 z Power cord x 1 z Rubber feet x 4 z Two rack-mounting brackets w ith attachment screws x1 If any of these pieces are missing or dam aged, please contact your dealer [...]

- 5 - advanced switch management functions such as port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port trunk, QoS, bandwidth control, broadcast storm control, MAC address / TCP & UDP filter and IGMP Snooping v1/v2. The FGSW-1820CS / FGSW-2620CS provi de port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN[...]

- 6 - 1.4 Specification Model FGSW-1820CS FGSW-2620CS Hardw are Specification Ports 16 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports Gigabit ports 2 10/100/1000Mbps ports share with 2 SFP interfaces Sw itch Processing Scheme Store-and-Forward Throughput (packet per second) 5.35Mpps. 6.54Mpps Sw itch Fabric 7[...]

- 7 - IGMP Snooping v1 / v2 Allow to disable or enable. Standards Conformance Regulation Compliance FCC Part 15 Class A, CE Standards Compliance IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab(Gigabit Ethernet) IEEE 802.3z(Gigabit Ethernet) IEEE 802.3x (Full-duplex flow control) IEEE 802.1Q VLAN IEEE 802.1p QoS[...]

- 8 - 2. HARDWARE DESCRIPTION This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same W eb Smart Switch and automatically distinguishes the speed of incoming connection. This section describes the hardware f eatures of Web Smart Switch. For easie r management and control of the Web Smart Switch, familiarize[...]

- 9 - # Notice: 1. Press the RESET button once. The Web Smart Switch will reboot automatically . 2. Press the RESET button for 5 seconds. The Web Smart Switch will back to the factory default mode; the entire confi guration will be erased. 2.2 Rear Panel The rear panel of the Web Smart Switch indicates an AC inlet pow er socket, w hich accepts inpu[...]

- 10 - 2.3.2 Rack Mounting To install the Web Smart Switch in a 19-inch standard rack, follow the in structions described below. Step 1: Place your Web Smart Sw itch on a hard flat surface, w ith the front panel positioned towa rds your front side. Step 2: Attach a rack-mount bracket to each side of the Web Smart Switch with supplied screw s attach[...]

- 11 - Figure 2-6 Plug-in the SFP transceiver A pproved PLA NET SFP Transceivers PLANET Web Smart Switch supports both single mode and multi mode SFP transceiver. The following list of approved PLANET SFP transceivers is correct at the time of publication: ■ MGB-SX SFP (1000Base-SX SFP transceiver ) ■ MGB-LX SFP (1000Base-LX SFP transceiver ) #[...]

- 12 - Figure 2-7 Pull out the SFP transceiver # Notice: Never pull out the module without pull the handle or the push bol ts on the module. Direct pull out the module with violent could damage the module and SFP module slot of the Web Smart Switch.[...]

- 13 - 3. SWITCH MANAGEMENT This chapter describes how to manage the Web Smart Sw itch. Topics include: - Overview - Management method - Logging on to the Web Smart Switch 3.1 Overv iew The Web Smart Switch provides a user-friendly, Web interface. Using this interface, you can perform various sw itch con- figuration and management activities, inclu[...]

- 14 - Figure 3-1 Planet Smart Discovery Utility Screen # Notice: If there are two LAN cards or above in the same administrator PC, choose different LAN card by use the “Select Adapter” tool. 3. Press “Refresh” button for list current connected devices in the discovery list, the screen is show n as follow. Figure 3-2 Planet Smart Discovery [...]

- 15 - 5. To click the “Control Packet F orce Broadcast” function, it can allow assign new se tting value to the Web Smart Sw itch under different IP subnet address. 6. Press “Connect to Device” button then the Web login screen appears in Figure 3-3 . 7. Press “Exit” button to shutdown the planet Smart Discovery Utility. 3.3 Logging on [...]

- 16 - 4. WEB MANAGEMENT To modify your PC’s IP domain to the same w ith Web Smart Switch then use the default IP address ( 192.168.0.100 ) to remote configure Web Smart Switch through the Web interface. # Notice: The following section will base on the console screens of FGSW-2620CS, for FGSW-1820CS the display w ill be the same to FGSW-2620CS. 4[...]

- 17 - The Switch Menu provide seven majo r management functions, the screen in Figure 4-2 appears. Figure 4-2 Web Main Menu Screen The seven items and it description shown as below : ◆ System: Provide System configurat ion of Web Smart Sw itch. Explained in section 4.2. ◆ Port Management: Provide Port Management configur ation of Web Smart Sw [...]

- 18 - 4.2 System This section provides System Information, IP Configur ation, Passw ord Setting, Fact ory Default, Firmw are Update and Reboot functions of Web Sm art Switch, the screen in Figure 4-3 appears and Table 4-1 describes the System object of Web Smart Switch. Figure 4-3 System Web Page Screen Table 4-1 Descriptions of the System Web Pag[...]

- 19 - 4.2.1 System Information This section displays the MAC address, Hardw are Version and Softw are Version, also allow define the device description and press “A pply” button to take affect. The screen in Figure 4-4 appears. Figure 4-4 System Information Web Page Screen # Notice: Up to 16 characters is allow ed for the Device Description.[...]

- 20 - 4.2.2 IP Configuration This section provides change the IP Addr ess, Subnet Mask and Gateway , the screen in Figure 4-5 appears. Figure 4-5 IP Configuration Web Page Screen .After setup complete and press “A pply” button to take affect. The following screen in Figure 4-6 appears and then another Web page login screen with new IP address [...]

- 21 - 4.2.3 Passw ord Setting This section provides change the Username and Password, the screen in Figure 4-7 appears. Figure 4-7 Passw ord Setting Web Page Screen # Notice: Up to 8 characters is allow ed for the usern ame and passw ord assign.[...]

- 22 - 4.2.4 Factory Default This section provides reset the Web Smart Switch to factory default mode, the screen in Figure 4-8 appears. Figure 4-8 Factory Default W eb Page Screen Press “Factory Default” button to take affect. The follow ing screen in Figure 4-9 appears and then another Web page login screen with default setting w ill show up.[...]

- 23 - 4.2.5 Firmw are Update This section provides firmware upgrade of the Web Smart Switch, the screen in Figure 4-10 appears. Figure 4-10 Firmware Update Web Page Screen Press “Update” button for start the firmw ar e upgrade process, the screen in Figure 4-11 & 4-12 appears. Figure 4-1 1 Firmware Update W eb Page Screen[...]

- 24 - Figure 4-12 Firmware Update Web page Screen Then the following screen appears, press “Browser” button to find the firmware locati on administrator PC, the screen in Figure 4-13 appears. Figure 4-13 Firmware Update Web Page Screen[...]

- 25 - After find the firmw are location from administrator PC, press “Up date” button to start the firmware upgrade process. The screen in Figure 4-14 appears. Figure 4-14 Firmware Update Web Page Screen When firmware upgrade process is completed then the follo w ing screen appears, please w ait for a w hile for system reboot. After device reb[...]

- 26 - 4.2.6 Reboot This section allows reboot the Web Smart Sw itch, the screen in Figure 4-16 appears. Figure 4-16 Reboot Web Page Screen Press “Reboot” button to reboot the Web Smart Switch, the screen in Figure 4-17 appears. After device reboot completed, the Web login screen appears and login for further management. Figure 4-17 Reboot Web [...]

- 27 - 4.3 Port Management This section provides Port C onfiguration, Port Mirroring, Bandwidth Control, Broadcast St orm Control and Port Statistics from Web Smart Switch, the screen in Figure 4-18 appears and Table 4-2 describes the system object of Web Smart Switch. Figure 4-18 Port Management Web Page Screen Table 4-2 Descriptions of the Port M[...]

- 28 - 4.3.1 Port Configuration This section introduces detail settings of per port on Web Smart Switch; the screen in Figure 4-19 & 4-20 appears and Table 4-3 & 4-4 descriptions the Port Configurat ion objects of Web Smart Switch. Figure 4-19 Port Configuration Web Page Screen Figure 4-20 Port Configuration Web Page Screen[...]

- 29 - Table 4-3 Descriptions of the Port Conf iguration Web Page Screen Objects Table 4-4 Descriptions of the Port Conf iguration Web Page Screen Objects Object Description Port Allow choosing all or one port of Web Smart Sw itch for further management, the available options is All & 01 to 26 (FGSW- 2620CS). Or All & 01 to 18 (FGSW-1820CS)[...]

- 30 - 4.3.2 Port Mirroring This section introduces detail settings of Port Mi rroring function of Web Smart Switch; the screen in Figure 4-21 appears and Table 4-5 descriptions the Port Mirroring objects of Web Smart Switch. Figure 4-21 Port Mirroring Web Page Screen Table 4-5 Descriptions of the Port Mirroring Screen Objects Object Description Mo[...]

- 31 - 4.3.3 Bandw idth Control This section introduces detail settings of Bandwidth Control function of Web Sm art Sw itch; the screen in Figure 4-22 appears and Table 4-6 description the Bandwidth Control objects of Web Smart Switch. Figure 4-22 Bandwidth Control Web Page Screen Table 4-6 Descriptions of the Bandw idth Control Screen Objects Obje[...]

- 32 - 4.3.4 Broadcast Storm Control This section introduces detail settings of Broadcast Storm Control function of Web Smart Switch; the screen in Figure 4-23 appears and Table 4-7 descriptions the Broadcast Storm Cont rol objects of Web Smart Switch. Figure 4-23 Broadcast Storm Control Web Page Screen Table 4-7 Descriptions of the Broadcast Storm[...]

- 33 - 4.3.5 Port Statistics This section introduces detail information of Port St atistics function of Web Smart Switch; the screen in Figure 4-24 ap- pears and Table 4-8 descriptions the Port Statistics objects of Web Smart Switch. Figure 4-24 Port Statistics Web Page Screen Table 4-8 Descriptions of the Port Statistics Screen Objects Object Desc[...]

- 34 - 4.4 VLAN Setting A Virtual LAN (VLAN) is a logical network grouping that limits t he broadcast domain. It allow s y ou to isolate netw ork traffic so only members of the VLAN receive tra ffic from the same VLAN members. Basica lly, creating a VLAN from a sw itch is logically equivalent of reconnecting a group of netwo rk devices to another L[...]

- 35 - 802.1Q Tag User Priority CFI VLAN ID (VID) 3 bits 1 bits 12 bits TPID (Tag Protocol Identifier) TCI (Tag Control Information) 2 bytes 2 bytes Preamble Destination Address Source Ad- dress VLAN TA G Ethernet Type Data FCS 6 bytes 6 bytes 4 bytes 2 bytes 46-1517 bytes 4 bytes The Ether Type and VLAN ID are inserted after the MAC sour ce addres[...]

- 36 -  VLAN Settings This section provides VLAN Configurat ion from Web Smart Switch, the screen in Figure 4-25 appears and Table 4-9 describes the VLAN Configurati on object of Web Smart Switch. Figure 4-25 VLAN Setting Web Page Screen Table 4-9 Descriptions of the VLAN Setting Screen Objects Object Description VLA N Mode Provide different VLA[...]

- 37 - 4.4.1 Port Based VLAN This section introduces detail information of Port Based VLAN function of Web Smart Switch; Choose “Port Based VLAN” from VLAN from the VLAN Mode and press “Apply ” button to enable the port based VL AN function. The screen in F igure 4-26 & 4-27 & 4-28 appears and Table 4-10 description the Port Based V[...]

- 38 - Figure 4-28 Port Based VLAN Configuration Web Page Screen Table 4-10 Descriptions of the VLAN Setting Screen Objects 4.4.2 Port Based VLAN Setting example: VLAN scenario 1. Port 26 is the file server port for all the workst ations 2. Port 1 to port 25 is different dev ices that do not need to see each other Setup step s 1. Port Setting 1.1 A[...]

- 39 - After the above steps port 1 to port 25 is being sep arated physica lly due to it belongs to dif ferent VLAN groups (dif ferent VLAN). How ever , they all can access port 26 due to port 26 is using overlapping feature to communicate w ith port 1 to port 25. 4.4.3 802.1Q VLAN This section introduces detail information of IEEE 802.1Q VLAN func[...]

- 40 - Figure 4-31 802.1Q VLAN Configur ation Web Page Screen Table 4-11 Descriptions of the 802.1Q VLAN Setting Screen Objects Object Description Group Display the existenc e 802.1Q VLAN groups. VID Display different VLAN ID from multi-802.1Q VLAN groups. VLA N Name Assign and display different VLAN name from multi-802.1Q VLAN groups. Up to maximu[...]

- 41 - Figure 4-32 802.1Q VLAN Per Port Setting Web Page Screen This section introduces detail info rmation of IEEE 802.1Q VLAN Per Port Setting of Web Smart Switch; The Table 4-12 description the 802.1Q VLAN Per Port Setting objects of Web Smart Switch. Table 4-12 Descriptions of the 802.1Q VLAN Per Port Setting Screen Objects Object Description P[...]

- 42 - 4.4.4 802.1Q VLAN Setting example T w o separate 802.1Q VLA N scenario 1. Shows how the W eb Smart Switch handles Unt agged and T agged traf fic from two 802.1Q VLAN group s. 2. Each VLAN isolate network traf fic, only the same VLAN member port can receive traffic from each other . Figure 4-33 two separate 802.1Q VLAN diagram VLAN Group VID [...]

- 43 - Setup steps 1. Create VLA N Group: Set VLAN Group 1 = default-VLAN with VID (VLAN ID) =1. Add two VLANs – VLAN 2 and VLAN 3, VLAN Group 2 w ith VID= 2 , VLAN Group 3 w ith VID= 3. Figure 4-34 Add new VLAN Group Screen 2. A ssign VLAN Member : VLAN 2 : Port-1,Port-2 and Port-3 . VLAN 3 : Port-4, Port-5 and Port-6 . VLAN 1: All other ports ?[...]

- 44 - Please remember to remove the Port 1 – Port 6 from VLAN 1 membership, since the Port 1 – Port 6 had been assigned to VLAN 2 and VLAN 3. Figure 4-36 Remove specify ports from VLAN 1 member # Notice: Its import to remove the VLAN member port from VLAN 1 group. Or the ports w ould become overlapping setting.[...]

- 45 - 3. A ssign PVID for each port: Port-1,Port-2 and Port-3 : PVID= 2. Port-4,Port-5 and Port-6 : PVID= 3. Port-7~Port-24 : PVID= 1. 4. Enable VLAN Tag for specific ports Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3). The Per Port VLAN configuration in Figure 4-37 appears. Figure 4-37 Port 1-Port 6 802.1Q VLAN Configuration T wo separate 802.1Q[...]

- 46 - 2. Assign Port-7 to both VLAN 2 and VLA N 3 at the VLAN Member conf iguration page. The screen in Figure 4-39 appears. Figure 4-39 VLAN overlap port setting 3. Define a VLAN 1 as a “Public A rea” that overlapping w ith both VLA N 2 members and VLA N 3 members . Figure 4-40 VLAN 1 – The public area member assign[...]

- 47 - 4. Setup Port-7 with “ PVID=1 ” at VLAN Per Port Configuration page. The screen in Figure 4-41 appears. Figure 4-41 Setup Port-7 with PVID-1 Although the VLAN 2 members: Port-1 to Po rt-3 and VLAN 3 members: Port-4 to Port -6 also belongs to VLAN 1. But with different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to [...]

- 48 - 4.4.5 MTU VLAN This section introduces detail information of MT U VLAN function of Web Smart Switch; Choose “MTU” from VLAN from the VLAN Mode and press “A pply” button to enable the MTU VLAN function. The screen in Figure 4-42 appears and Table 4-14 description the MTU VLAN objects of Web Smart Switch. Figure 4-42 MT U VLAN Configur[...]

- 49 - 4.5 Trunk Port link aggregations can be used to increase the bandwidth of a netw ork connection or to ensure fault recovery. Link aggregation lets you group up to 4 consec utive ports into a single dedicated connection betw een any tw o the Switch or other Layer 2 sw itches. However, bef ore making any physical connections bet w een devices,[...]

- 50 -  Trunk Setting This function allows to configuring t he trunk function. It provides up to tw o trunk groups and each trunk group provides 4 member ports. Also provide four various Trunk Ha sh Algorithm policies for selection. The screen in Figure 4-43 appears and Table 4-15 description the Tr unk Setting objects of W eb Smart Switch. Figu[...]

- 51 - 4.6 QoS Setting This function provides QoS Setting of Web Smart Switch; the screen in Figure 4-44 appears and Table 4-16 descriptions the QoS Setting of Web Smart Switch. Figure 4-44 QoS Setting Web Page Screen Table 4-16 Descriptions of the QoS Setting Screen Objects Object Description Priority Mode Provide three different Priority polices [...]

- 52 - 4.6.1 Priority Mode This section introduces detail information of Pr iority Mode of Web Smart Switch; the screen in Figure 4-45 appears and Table 4-17 descriptions the Priority Mode of Web Smart Switch. Figure 4-45 Priority Mode Web Page Screen Table 4-17 Descriptions of the Priority Mode Screen Objects Object Description Priority Mode Provi[...]

- 53 - 4.6.2 Class of Serv ice Configuration This section introduces detail information of Class of Se rvice Configuration of Web Smart Switch; the screen in Figure 4-46 appears and Table 4-18 descriptions the Class of Service C onfiguration of Web Smart Switch. Figure 4-46 Class of Service Confi guration Web Page Screen Table 4-18 Descriptions of [...]

- 54 -  IP TOS/DSCP Priority v alue define TOS/DSCP Value High Priority EF DSCP 46 (101110) AF11 DSCP 10 (001010) AF21 DSCP 18 (010010) AF31 DSCP 26 (011010) AF41 DSCP 34 (100010) Low Priority Other DSCP values DSCP : Differentiated Services Code Point EF : Expected Forwarding AF : Assured Forwarding[...]

- 55 - 4.6.3 TCP / UDP Port Based QoS This section introduces detail information of TCP / UDP Port Based QoS Configuration of W eb Smart Switch; the screen in Figure 4-47 & 4-48 appears and Table 4-19 descriptions the TCP / UDP Port Ba sed QoS Configuration of Web Smart Switch. Figure 4-47 T CP / UDP Port Based QoS Configuration W eb Page Scree[...]

- 56 - Table 4-19 Descriptions of the TCP / UDP Port Based QoS Configuration Screen Objects Object Description Protocol Display different Protocol for define the QoS policy in option FTP(20,21) Provide F-I-F-O, Discard, L o w , High options. SSH(22) Provide F-I-F-O, Discard, Low , High options. TELNET(23) Provide F-I-F-O, Discard, Low , High option[...]

- 57 - 4.7 Security Filter This function provides Security Filt er of Web Smart Switch; the screen in Figure 4-49 appears and Table 4-20 descriptions the Security Filter of Web Smart Sw itch. Figure 4-49 Security Filter Web Page Screen Table 4-20 Descriptions of the Security Filter Web Page Screen Objects Object Description MA C Address Filter Allo[...]

- 58 - 4.7.1 MA C Address Filter This section introduces detail information of MAC A ddress Filter of Web Smart Switch; the screen in Figure 4-50 appears and Table 4-21 & 4-22 descriptions the MAC Address Filter of Web Smart Switch. Figure 4-50 MAC Address Filter Web Page Screen Table 4-21 Descriptions of the MAC Address Filter Screen Objects T[...]

- 59 - 4.7.2 TCP / UDP Filter This section introduces detail information of TCP / UDP Filter of Web Smart Switch; the screen in Figure 4-51 & 4-52 appears and Table 4-23 descriptions the TCP / UDP Filter Configuration of Web Smart Switch. Figure 4-51 T CP / UDP F ilter W eb Page Screen Figure 4-52 T CP / UDP F ilter W eb Page Screen[...]

- 60 - Table 4-23 Descriptions of the TCP / UDP F ilter Configuration Screen Objects Object Description Function Enable Allow to Disable or Enable the TCP / UDP Filter function. Default mode is Disable . Port Filtering Rule Allow to Forward or Block the Port Filtering Rule. Default mode is Block . Protocol Display different Protocol for def ine the[...]

- 61 - 4.8 Misc Operation This function provides Misc Operati on of Web Smart Switch; the screen in Figure 4-53 appears and Table 4-24 descrip- tions the Misc Operation of Web Smart Switch. Figure 4-53 Misc Operation Web Page Screen Table 4-24 Descriptions of the Misc Oper ation Web Page Screen Objects Object Description Output Queue A ging Time Al[...]

- 62 - 4.9 Logout This section provide Web logout func tion on Web Smart Switch, after choose this function and the following screen appears in Figure 4-54 & 4-55 . Please press “Logout” button to take effect and Login W eb Screen appears. Please re-login the Web Smart Switch for further management. Figure 4-54 Logout Web Page Screen Figure[...]

- 63 - 5. SWITCH OPERATION 5.1 Address Table The Switch is implemented w ith an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning proce ss of Ethernet Switch. 5.2 Learning When one pack[...]

- 64 - 6. TROUBLESHOOTING This chapter contains information to hel p you solve problems. If the Switch is not functioning properly, make sure the Ethernet Switch w as set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remo ve duplex mode of the Switch. Some st ations cannot t alk to oth[...]

- 65 - APPENDIX A NETWORKING CONNECTION A .1 Sw itch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T RJ-45 Connector pin assig nment Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assig nment Contact MDI Me[...]

- 66 - There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following show s the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cables are w ith same pin assignment and color as abov e picture before deploy ing the[...]

PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com.tw http://www .planet.com.tw 1 1F , No. 96, Min Chuan Road, Hsin T ien, T aip EC Declaration of Conformity For the following equipment: *T ype of Product: 16-Port 10/100Base-TX + 2G TP/SFP Combo W eb Smart Switch *Model Number: FGSW -1820CS * Produced by: Manufacturer‘s Name : Planet T echno[...]

EC Declaration of Conformity For the following equipment: *T ype of Product: 24-Port 10/100Base-TX + 2G TP/SFP Combo W eb Smart Switch *Model Number: FGSW-2620CS * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 11F , No 96, Min Chuan Road Hsin T ien, T aipei, T aiwan , R. O.C. is herewith confirmed to comply[...]