Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID manuale d’uso

Owner’s Manual Please read before using this equ ipment. 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller ID[...]

2 Read This Before Installation ˆ Read This Before Installation This phone has bee n tested and found to comply with all applicable ETL and FCC standards. FCC STATEMENT Your phone complies with Part 68 of FCC Rules . You must, upon request, provide the FCC registration numb er and the REN to your telephone company. Both numbers are on the bottom o[...]

3 Read This Before Installation only telephone. To be safe, you should al so have a phone that does not require AC pow- er to operate (not a cordless p hone) so you can still make and recei ve calls if there is an AC power failure. Some cordless phones operate at frequen- cies that might cause interference to nearby TVs and VCRs. To minimize or pre[...]

4 Read This Before Installation 8. T o reduce the risk of electric shock, do not disassemble this product. If servic- ing is required, take it to a qualifie d ser- viceman. 9. Disconnect this product from the tele- phone line and re fer to qu alified service personnel under the follo wing condi- tions. • If liquid has been spill ed into the prod-[...]

5 Contents with this product, in high temperature areas. 1 1. Batteries that are store d in a freezer or refrigerator for the p urpose of extending shelf life sh ould be protected fro m con- densation during stor age and defrosting. Batteries should be stabilized at room temperature prior to use after cold stor- age. SA VE THESE INS TRUCTIONS ˆ Co[...]

6 Features ˆ Features Your RadioShack 2.4 GHz Digital Spread Spectrum Cordless Telephone uses ad- vanced technology to give yo u superior au- dio quality and extended range. Th e phone’s Caller ID unit records each caller’s telephon e number (and name, if available in your area) and the date and time of the call, as provided by your local phon[...]

7 Installation ˆ Installation MOUNTING THE PHONE Select a flat surface that is: • near an AC outl et • near a telephone line jack • out of the way of normal activities • away from ele ctrical machi nery , electri- cal appliances, metal walls or fili ng cabi- nets, wireless intercoms, alarms, and room monitors • away from other cordless p[...]

8 Installation nector fits only one way), repl ace the battery pack, and replace the cover . To charge the battery p ack, place the hand- set on the base. The CHARGE indicator on the base lights a nd Je j W b 0 & & Je j W b 0 & & Je j W b 0 & & Je j W b 0 & & appears. Recharge the battery pack when Be mý 8Wjj[ho Be [...]

9 Installation STORING Y OUR AREA CODE You can store your local area code in the phone’s Caller ID record so it does not sho w the area code if the received call is from yo ur local area. Note: If your calling area requi re s 10-digit di- aling including area code, do not enter the area code but leave this option blank. Follow these steps to stor[...]

10 Operation ˆ Operation A QUICK LOOK AT Y OUR PHONE TA L K — To make a ca ll, lift the hand- set and press TA L K . J7BA J7BA J7BA J7BA appears, and the IN USE/PAGE ind icator on the base lights. Enter the number. The number appears as you dial, then (after a few s econds) the cal l’s elap sed time appears. You can also enter the number befor[...]

11 Operation ADJUSTING THE HANDSET’ S V OLUME To adjust the handse t’s volume du ring a ca ll, press 8 8 8 8 or 9 9 9 9 on the handset unti l you reach the desired vol ume level. The number and a bar graph of the volume leve l appear. The volume level setting is ma intained even after you hang up the phone. Note: When you press 8 8 8 8 while th[...]

12 Operation T o enter a special character, use 0 . Each time you press 0 , the following charac- ters appear in this order: * ç ç ç ç ¶ ¶ ¶ ¶ ) ) ) ) âýá âýá âýá âýá (space) U U U U &ý &ý &ý &ý If you make a mista ke, use 6 6 6 6 / ∗ ∗ ∗ ∗ /TONE to move the cursor over the erro r , then press DELETE [...]

13 Caller ID Operation MOVING OUT OF RANGE If you have the handset out of the base's range while a call is in progress, the handset beeps and EKJý E<ý H7D=; EKJý E<ý H7D=; EKJý E<ý H7D=; EKJý E<ý H7D=; appears. Re turn to the base’s range within 30 seconds, then you can resume your phone conversation. USING A HEADSET You [...]

14 Caller ID Operation you scroll past the last record, ;dZý eý B_ij ;dZý eý B_ij ;dZý eý B_ij ;dZý eý B_ij ap- pears, then the first record. When you scroll past the first record, ;dZý eýB_ij ;dZýeýB_ij ;dZýeý B_ij ;dZýeýB_ij appears, then the last record. The top line of each reco rd shows the time, date, and the number of[...]

15 Troubleshooting DELETING CALLER ID RECORDS To delete a singl e Caller ID re cord , press 8 8 8 8 or 9 9 9 9 to recall the reco rd you want to delete. Press DEL ETE . ;hWi[5 ;hWi[5 ;hWi[5 ;hWi[5 appears, prompting you to confirm the del etion. Press DELETE again. The phone beeps on ce indicating that the record was deleted. To delete all Caller I[...]

43-3519 05A01 Printed in Korea RadioShack Corporation Fort Worth, Texas 76102 If you still have proble ms, disconnect the phone. If other phones on the sa me line work proper- ly, the fault is in th is phone or its in stallation. If you cannot fi nd the problem, take the p hone to your local RadioShack store for assistance. CARE Keep the phone dry;[...]