RCA VR508 manuale d’uso

USER’S GUIDE VR337/VR508 VIDEO CASSETTE RECORDER[...]

i Introduction WARNING To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour Žviter les chocs Žlectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser j[...]

Introduction T able of Contents 1 Important Infor mation Warnings ______________________________ i Cautions ______________________________ i Note to Cable TV Installer _______________ i Product Registration ____________________ i Hooking Up the VCR Choosing a Hookup ____________________ 2 Antenna or Cable System Without a Cable Box ________________[...]

2 Hooking Up the VCR Choosing a Hookup The hookups on pages 3 through 5 are divided into two hookup types: Basic (A) and Advanced (B). The basic hookup shows the backs of TVs that have only an antenna/cable connection. It is the easier of the two and additional accessories may not be needed. The advanced hookup shows the VCR hooked up to a TV with [...]

A. Basic hookup. Use this hookup for a simple connection which requires fewer accessories. 1 . Set the 3CH.4 switch on back of VCR to either channel 3 or 4. Tune the TV to this channel and use the TV•VCR button to watch the VCR. 2 . Connect as shown. This connection may require additional accessories not provided. 3 . Plug in power cords of VCR a[...]

4 Hooking Up the VCR Cable System With Cable Box to Unscramble All Channels OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 IN OUT OUT OUT IN Cable Box From Cable RF Coaxial Cable Back of VCR Back of TV Cable/ Antenna OR VHF UHF RF Coaxial Cable (supplied) 75 to 75/300 Ohm Separator OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 IN[...]

A. Basic hookup. Use this hookup for a simple connection which requires fewer accessories. 1 . Set the 3CH.4 switch on back of VCR to either channel 3 or 4. Tune the TV to this channel and use the TV•VCR button to watch the VCR. 2. Connect as shown. This connection may require additional accessories not provided. 3 . Plug in power cords of VCR, T[...]

6 Hooking Up the VCR Connecting T wo VCRs for Copying T apes OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 IN OUT OUT OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 IN OUT OUT Playback VCR RF Coaxial Cable (supplied) Recording VCR Audio/Video Cables RF Coaxial Cable or Use the hookup to the TV as previously selected on pages 3, 4[...]

7 Setting Up the VCR 1. Check accessories with VCR. Contact your dealer if any items are missing. 2. Insert batteries in remote. 3. T urn on the TV . If you used one of the basic hookups, tune the TV to the channel selected with the 3CH.4 switch on back of VCR. If you used one of the advanced hookups, tune the TV to the TVÕs video input. (See TV o[...]

VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS 8 5. Place channels in the VCR’ s memory . The first time you turn on the VCR or after a power interruption, the VCR displays a message on the TV screen prompting you to perform the AUTO CHANNEL SEARCH . If the message does not appear, go to step[...]

VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS 4 PREFERENCES 9 Setting Up the VCR Star tup 7. Select the language/Seleccione el idioma/ Sélectionner la langue. The VCR displays the on-screen menus in the English, Spanish or French language. The word ÒLanguageÓ cycles through the different languages when the VCR Main Menu is displayed on the [...]

VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 10 Setting Up the VCR Star tup 10. Set the time and date. The TIMER indicator on the VCR front panel flashes until the time is set. A . Press MENU on remote to display the VCR MAIN MENU . B . Press 2 to display the TIME menu. C . Press 1 to display SET TIME AND DATE . D[...]

11 Using the Remote Contr ol VCR Function Buttons CLEAR MENU SPEED INPUT F. ADV TRACKING STOP PLAY 1 2 3 5 4 6 7 9 8 0 PAUSE SLOW SEARCH REC FF REW CHAN POWER DISPLAY TV•VCR PREV CH CHAN (CHANNEL) Up or Down Selects the next higher or lower channel in the VCRÕs channel memory. CLEAR Resets the time counter to 0:00:00 . Lets you change entries wh[...]

12 Playing a T ape Playback To play a tape 1 . Turn on the TV and tune it to channel 3, 4, or the TVÕs video input to see the picture from the VCR. 2 . Insert a tape in the VCR. The VCR automatically turns on. The POWER and VCR indicators light. The tape automatically begins playback if the safety tab on the cassette has been removed and the AUTO [...]

VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS 4 PREFERENCES 13 Using the Playback Featur es Playing a T ape AUTO PLA Y Feature This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. 1 . Press MENU on the remote to display the VCR MAIN MENU . 2 . Press 4 to display the PREFERENCES menu. 3 [...]

14 Using the Playback Featur es DISPLA Y Button The DISPLAY button shows the status of the VCR channel number, time counter, date, time and tape speed on the TV screen. The time and date must be set before they can be displayed. 1. Press DISPLAY . If you do not press DISPLAY again, this display times out. 2. Press DISPLAY again to display only the [...]

15 Using the Playback Featur es Index Search The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on the tape every time you begin recording a program. Your VCR has two index playback features. To locate the program you want to play, select a specific index number or search by scanning. Some index marks may be missed b[...]

16 Pause for Stop Action This feature stops the tape in action and lets you examine the details of the scene. For model VR337 , stop action works best for tapes recorded in the SLP speed. For model VR508 , stop action works best for tapes recorded in the SP or SLP speed. 1 . Press PAUSE during playback to stop the action. 2 . For model VR337 , if h[...]

17 Recording a Program Your VCR provides different recording options. These options are explained in this section of the manual. Recording Speeds Press SPEED on the remote to select a recording speed (SP or SLP). The speed you select appears on the TV screen. Tapes recorded in LP can be played in this VCR. SP (Standard Play) gives the best quality [...]

18 Recording a Program Expr ess Recording Express recording lets you record up to four hours without using the timer program feature. The VCR turns off automatically at the end of the recording. 1. Turn on the VCR. 2. Insert a tape with its safety tab in place. 3. Select the channel you want to record. 4. Use SPEED on the remote to select a recordi[...]

19 Recording a Program Recor ding While Y ou’r e Away (Timer Recor ding) The timer program feature lets you program the VCR to record up to eight different programs within a one year period. Before setting the timer, make sure that: ¥ The clock is set correctly. ¥ A tape with a safety tab has been inserted with enough tape to record the program[...]

VCR MAIN MENU 1 TIMER RECORDINGS 20 Recording a Program Timer Recording Fr om the VCR’ s Line Input The line input refers to the signal coming from the AUDIO1 and VIDEO1 IN jacks of the VCR. Recording from the line input is convenient if you have a satellite receiver or similar component attached to these jacks. To timer record from the component[...]

VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS 4 PREFERENCES 21 Recording a Program Using T wo VCRs for Copying and Editing T apes Operating Instructions (Refer to hookup on page 6.) Use one VCR as the playback VCR and the other as the recording VCR. 1. Turn on the TV and VCRs. 2. Tune the TV to the VCR viewing channel, either 3, 4, or the TVÕ[...]

22 References Location of Contr ols CHANNEL REW PLAY FWD RECORD POWER STOP•EJECT PAUSE TV•VCR TRACKING POWER VCR TIMER RECORD CHANNEL or TRACKING up or down Selects next higher or lower channel in the VCRÕs channel memory. Adjusts tracking during playback. FWD (Fast Forward) Fast forwards the tape when the VCR is stopped. Searches the picture [...]

23 References Location of Contr ols Back Panel 3CH.4 Switch Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups. IN FROM ANT. (Antenna) Connector Receives a signal from an antenna or cable system when attached. OUT TO TV Connector Passes signal to TV using the cable supplied. VID[...]

24 References Format: VHS Record/Playback Video: 2-Head (VR337) System: Video: 4-Head (VR508) Audio: Mono record/playback system Video Signal System: EIA standard: NTSC color Antenna: 75-ohm external VHF/UHF combined antenna terminal Tuner: USA: 181 channels capability* (125 cable channels) Canada: 178 channels capability* (122 cable channels) Type[...]

25 References Limited W arranty What your warranty covers: ¥ Any defect in material or workmanship. For how long after your purchase: ¥ Ninety days for labor charges. ¥ One year for parts. The warranty period for rental units begins with the first rental. What we will do: ¥ Pay any Authorized RCA VCR Servicenter the labor charges to repair your[...]

26 References T r ouble Checks Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your VCR to an Authorized RCA VCR Servicenter. N o power VCR does not respond to remote Poor or no picture for normal TV viewing Snowy or no picture during playback Streaks in picture during normal play[...]

27 References T r ouble Checks T rouble Here's what to tr y: Timer recording not made or wrong program recorded Incorrect time or date Time did not adjust for daylight savings VCR makes noise when stopped Will not Auto Channel Search correctly Cannot select channels over 69 Cassette with safety tab removed does not start to play automatically [...]

28 References Index 3CH.4 Switch ...................................................3-7,9,23 Accessories, Included ................................................7 Add or Remove Channels from Memory ...............8 ADD/REMOVE CHANNEL Menu ............................8 ALERT SOUND Feature ..........................................11 Antenna Connec[...]

29 Sensor, Remote .........................................................22 Setting a Timer Recording ......................................19 Setting Up the VCR ..............................................7-10 PREFERENCES Menu ..............................9,10,13,21 SLOW Button ..................................................11,13,16 Slow M[...]

For your nearest Home Entertainment Dealer or Authorized Servicenter call toll-free in the U.S.A. 1-800-336-1900 Canadian Consumers – Your toll free numbers are: English: 1-800-522-0338 French: 1-800-522-0445 Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service fo[...]