Revolabs 10-FLX2-200-POTS manuale d’uso

REVOLABS FLX2 TM Wireless Confere nce System for analog phone l ines System Guide Models: 10 -FLX2- 200 -POTS 10 -FLX2- 02 0-POTS 10 - FLX2- 00 2-POTS 10 -FLX2- 101 -PO TS[...]

2 © 2011 REVOLABS, INC. All rights r eserved. No part o f this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. Revol abs FLX2 System Guide – Analo g 10 - FLX 2SYSGUIDE- EN October 2011 (Rev 1.2.19)[...]

3 Introduction Congratulations on your purchase of the Revolabs FLX2 TM W ireless Con ference Phone. This system utilizes state of the art technology providing high band-width audio and enabling clear, reliable, un-tethe red communications with your telephone, PC, mobile device, and video conferencing system. The Revolabs FLX2 Conferencing Phone al[...]

4 Contents Introduction ............................................................................................................................................ 3 Safety Warnings ..................................................................................................................................... 3 Contents ......................[...]

5 System Informat ion ...................................................................................................................................... 38 Bluetooth .......................................................................................................................................................... 38 Home .................[...]

6 General Informat ion The Revolabs FLX2 Conference Phone includes several components which, in the sum, make up the conferencing phone. The components are the Charger Base, Speaker, Microphones and Dialer (handset). In addition, the Base Station receives the wireless signals f rom those components and connects into your telephone network for confe[...]

7 Quick setup fo r Telephone Conferen ce Calls W hile all components delivered with the Revolabs FLX2 Conference Phone are partially charged, we recommend charging the Speaker, the Microphones, and th e Dialer for at least 8 hours or overnight before starting to use the system. Please note that the Revolabs FLX2 Conference Phone comes with two diff[...]

8 Making a call To make a conference call, take at least one of the Microphones out of the Charger Base, and take the Dialer out of the Charger Base. You can remove all Microphone s and the Speaker if you wish, but this is not required. Use the Dialer to enter the number you want to call, including any leading digits your telephone connection might[...]

9 Description The Revolabs FLX2 ™ Wireless Conference Phone is a unique marriage of innovative technology and ergonomic design, allowing for an unp aralleled experience when making telephone calls, video conference calls, or using it with your Bluetooth enabled cell phone or computer to make speaker phone calls. Th e technology used allows the Mi[...]

10 Installing FLX2 Components The Revolabs FLX2 TM System is comprised of several components that work together to provide you with a great wireless conferencing sy stem. The se components must be setup correctly for optimal performance of the system. FLX 2 Base Station The Base Station is the wireless receiver and sender of the audio stream from t[...]

11 FLX 2 Charger Base The FLX2 Charger Base, shown below, provides charging capabilities for all battery operated system components, inc luding the Dialer, the Speaker, and the Microphones, by allowing them to charge in one simple and organiz ed location. The FLX2 Charger Base is not required while in a conference call, howev er it can maintain the[...]

12 FLX Dialer The FLX Dialer equips the user with an intuitive and interactive tool for configuring and operating the FLX System . The Dialer is not only used to make and answer conference calls, but it is also used for configuring the system settings , having a call using the handset, and monitoring th e system components. The FLX Dialer, shown be[...]

13 FLX Speaker The FLX Speaker, shown below, is a wireless active omnidirectional speaker that has been designed and optimized specifically for use with the FLX Conferencing System . The Speaker is equipped with a pairing button on the bottom and 4 LED indicators on the top to display the activ ity of the Speaker and the mute status of the system. [...]

14 FLX Micropho nes The FLX Microphones provide a sleek and unobtrusive form factor allowing for closer proximity to the participants and creating the best audio available to the far end. They are equipped with a button for pairing and muting, an LED indicator to display mute status and battery charge lev el , a nd an internal buzzer to warn if the[...]

15[...]

16 Initial Setup After unpacking the FLX2 Conferencing System, there are a few initial setup tasks that must be performed before a call can take place or any system configuration can be changed. Connecting System Cables The FLX2 Base Station and Charger Base each hav e a power supply that needs to be connected, as shown below. In addition, the Base[...]

17 call, as well as the Speak er and Microphones, are controlled by the FLX Dialer. The user can switch between „speaker mode‟ and „ handset m ode‟ while in a call. Handset Mode Handset mode allows a telephone call to take place throug h the handset speaker and microphone located in the FLX Dialer. This allows a single user to make and rece[...]

18 NOTE: When using the FLX connected throu gh the AUX IN and A UX OUT to another device, on ly the FLX speaker can be used. All other speakers must be switched off. Any Echo Cancellation provided on the V ideo Conferencing unit must be switched off. NOTE: For security reasons, Microphones will not send any audio signal to the AUX OUT conn ector wh[...]

19 Ans w ering an Inc oming Telephon e Call 1. When the FLX2 System identifies an incoming call, it will p la y the ring tone through the FLX Speaker. If the Dialer is not in the Charger Base it will play a ring tone, too. 2. If your phone line supports caller ID, and the caller has not suppressed their caller ID information, t he FLX Dialer will d[...]

20 Ending a Teleph one call 1. A call can be ended in two fashions. a. Press the Red „End Call ‟ button on the FLX Dialer during a call. b. Place the Dialer in the charger. ( „Handset mode ‟ only) 2. When a call is ended the FLX Dialer will display the phone number and the call duration for 2 seconds. 3. After 2 seconds, the home screen is [...]

21 Muting a Call 1. In handset mode, the „M ute ‟ and „UnMute‟ key will mute/unmute the FLX Dialer microphone, not the wireless Microphone s. 2. In speaker mode, the „M ute ‟ and „UnMute‟ key will mute/unmute all wireless Microphones. NOTE : If th e setting ‘All Mic Mu te’ is OFF, t he Microphone mute buttons will be locked whil[...]

22 Conference Call 1. Press the „ Enter ‟ key to access the Active Call Menu and select „ Conference ‟. 2. Create the second call by selecting Dialer, Contacts, or Recent. 3. Initiate the second call. 4. After the second call has been established, m erge th e two calls by pressing the green „Call‟ button again. Call Waiting 1. While a c[...]

23 W hen t he Dialer is removed from the Charger Base no change to call activ ity will take place. If there is no active call, the Dialer will revert to the home screen. Speaker W hen t he Speaker is placed into the charger during a call the Speaker will reboot and enter its charging mode. During the reboot the incoming audio from the conference ca[...]

24 Bluetooth The FLX2 System is equipped with a Bluetooth interface allowing a call to be placed through a cell phone, computer, or 3 rd party Bluetooth device. The FLX Microphone s and Speaker then act as the Microphone and Speaker for that call. The FLX2 System only supports the Hands Free Profile for Bluetooth 2.0 or newer . Should the applicati[...]

25 A dding a De vice 1. Go to the Menu  Bluetooth. Select „Discov ery Mode‟ to activate Bluetooth and accept Bluetooth Request from other devices. 2. The FLX Dialer displays “This device is visi ble to other devices in range for 3 minutes” 3. The discovery mode scr een will read “System in discoverable Mode, Start Scan From BT Device. [...]

26 Viewing Device Details 1. Go to the Menu  Bluetooth. Select „Device Li st‟. 2. Select desired device and press the „Enter‟ key or the „Select‟ key to view device details 3. Device Information screen is shown w ith d evice name, address, BT version, and date/time the device was first connected. Removing a Device 1. Go to the Menu ?[...]

27 Setting Device Trust Level 1. Go to the Menu  Bluetooth. Select „Device Li st‟. 2. Select the desired device and press the „Enter‟ key or the „Select‟ key to view the device details. 3. Press the „Option‟ key and then select „Option s…‟ . 4. Choose either „Auto - Connect‟ or „Ask‟ depending on the trust level you[...]

28 Video Confere nce Collaborati on The FLX2 System is equipped with balanced analog audio input and output to be connected to 3 rd party video or PC conferencing system. This allows the FLX Microphones and Speaker to be used as Microphones and Speaker for the video call. It also provides Acoustic Echo Cancelation and Noise Control to the video cal[...]

29 Mixing the aud io signals As discussed earlier, Audio and Video, or Bluetooth and Video calls can be made simultaneously from a FLX system, requiring FLX to mix the audio of the different inputs to go to the different outputs. In the Audio Controls menu, available from the main menu and the Active Call Menu, the Audio Mixer menu is offered. This[...]

30 FLX 2 Sy stem Configuration There are many features to the FLX2 System that can be modified and configured using the FLX Dialer. The following is a list of those features and their options. Menu Hiera rchy Menu Navigation 1. The left, right, up and dow n navigation keys are used to highlight an icon and the Enter key is used to make a selection.[...]

31 Recent Calls The Recent Calls call log stores the contact information from calls placed or received, allowing the user to review recent calls, redial a recent call, or store a recent call in the system directory. Recent Call Log 1. Access recent call log by browsing: Menu  Recent Calls 2. The recent call list is sorted chronologically with th[...]

32 View Recent Call Information 1. Access the recent call log by brow sing: Menu  Recent Calls or pressing the green „C all ‟ button while no call is in progress. 2. You can view a recent call one of two ways: a. In the recent call list, s elect the entry you want to view, and press the „ V iew‟ key . This displays more information for t[...]

33 Delete Call History 1. Access the recent call log by browsing: Menu  Recent Calls or pressing the green „Call‟ button while no call is in progress. 2. In the Recent Call menu, press „ Enter ‟ to open the Options Menu. 3. In the Options Menu select „Delete Redun dant‟ to delete redundant call history information, or select „Delet[...]

34 Edit a Contact 1. Brow se to the Contacts menu: Menu  Contacts, scroll to the desired contact, and selects „ View ‟ to access the contact. 2. The contact screen show s the current name and number . Pressing the „ Edit ‟ key will open the Ed it Contact m enu . 3. In the Edit Contact menu, select „E dit Info‟ to edit the selected co[...]

35 Search for Contact 1. Brow se to the Contacts menu: Menu  Contacts. 2. Use th e keys (0-9) to apply a filter a. On ce a key is pressed the title line will read ‟Contact( )‟ and display the characters being typed. b. T he search string can be up to 5 characters long. c. In this mode the ‟ Clear ‟ key will delete the last character in t[...]

36 Set Speed Dial 1. Brow se to the Co ntacts menu: Menu  Contacts, scroll to the desired contact, and selects the „View‟ key to access the contact. 2. The contact view screen sh ows the current name and number . Pressing the ‟ Edit ‟ key w ill open the Edit Contact m enu . 3. In the Edit Contact menu select „Set S peed Dial‟ . 4. Sc[...]

37 Ringer 1. Browse to the Ringer menu: Menu  Audio Controls  Ringer. 2. Choose „Ringer Volume‟ in the Ringer Settings menu to adjust the Ringer Volume. 3. Press the up and down buttons to increase an d decrease the volume. 4. Choose „Ring Tone‟ in the Ri nger Settings menu to select a ring tone. 5. Use the up and dow n buttons to sel[...]

38 Device Status 1. Brow se to Device Status: Menu  Device Status. 2. The Device Status screen shows status for the Microphones and the Speaker. System Informatio n The following is a list of FLX Dialer menus that allow the user to retrieve system information. System Info 1. Brow se to System Info: Menu  System Info. 2. About System shows the[...]

39 Home W hen sel ecting the „Home‟ menu item, the Dialer will g o back to displaying the home screen. The same effect can be achieved by pressing the „Return‟ key, or the red „End Call‟ button. Call W hen sel ecting „Call‟ in the menu, the Dialer will open the Dialer menu, allowing dialing a number. Setup Setup is divided in to a g[...]

40 attempt to derive the date and time from the telephone netwo rk . Bluetooth, Audio, System Info The menu entries for Bluetooth, Audio, and Sy stem Info in the setup menu will open the top level menus of the same name described earlier in this documentation. Advanced Setup The following is a list of advanced configuration settings that are protec[...]

41 Mic Audio The „Mic Audio‟ allows controlling the Microphones. 1. If „ All Mic Mute ‟ is ON, all active Microphones are affected when a mute button is pressed. If one or more active Microphones are outside the Charger Base, pressing the mute button will change the mute status on all Microphones outside o f the Charger Base. Microphones in[...]

42 Aux Audio „ Aux Audio ‟ is to control the A UX In and AUX O ut connections on the base. 1. Aux In ON/OFF and Aux Out ON/OFF allow enabling / disabling the Aux connectors of the FLX phone. 2. Aux In Level allows changing the level of the Aux In signal. 3. Aux Out Lev el allows ch anging the level of the Aux Out signal. 4. Aux Out – MIC / LI[...]

43 Setting System Nam e 1. Go to Menu  Setup  Advanced Setup  Admin Settings  Set System Name. 2. Change the current System Name to the new name, and press Enter. Reset Defaults 1. Go to Menu  Setup  Advanced Setup  Admin Settings  Reset Defaults. 2. Resetting defaults w ill revert back to factory defaults. Pairing of device[...]

44 Pairing All FLX2 wireless components are paired before the system is shipped, providing much of the system setup already completed. W hile pairing should not be req uired for the system to work, sometimes components can require pairing if a part is shipped separately. The following are instructions on how to pair the wi reless components of the [...]

45 7. After a short time an overlay wil l appear on the FLX Dialer saying „ Pairing Successful ‟ , after which the screen should read „ SPK 1 Linked ‟ . 8. If pairing was unsuccessful, the Speaker wi ll show an alternating red -green slow blinking sequence ind icating that the pairing failed. The Dialer will display a „Pairing Timeout‟ [...]

46 Phone Settings 1. Brow se to the Phone Settings menu: Menu  Setup  Advanced Setup  Phone Settings. a. You can change the di aling method by selecting the entry, and then pressing the „Select‟ key. The factory preset is T ONE. b. You can set the teleph one number of the FLX2 System using the Phone Number setting. Select this entry , [...]

47 1. Hold down the button on the bottom of the Speaker until the LED indicators on the top of the Speaker turn green. Once the LED indicators turn green, release the button and the Speaker will power on and connect to the syste m. OR 2. Simply return the Speaker to an active Charger Base and it will power on automatically. Microphones On/Off To po[...]

48 connector to 3.5mm unbalanced male connector (some PCs require unbalanced to stereo) All Lifesize Video Codecs All Sony Video Codecs excluding the PCS-HG90 model 07 -35MUTODRCA- 01 Cable 3.5mm unbalanced male connector to dual RCA connector Polycom HDX 7000 & 8000, QDX 6000, VSX 5000 & 7000(e/s) Video Codecs 07 -35MUTORCA- 01 Cable 3.5mm[...]

49 Dialer Link Lost If the FLX Dialer loses connection to the FLX2 Base Station it w ill display a „ connection lost ‟ notification on the screen and starts emitting a warning sound. The Dialer should be moved back into range of the Base Station at which point it will reconnect automatically. Base Power Lost If the FLX2 Base Station loses power[...]

50 Telephon e Interface proble ms “ Line in Use ” even though there is no call If you see messages that the telephone line is in use, even though no call is currently in progress, please change the Disconnect setting from OFF to ON (see the section on Phone Settings on page 46 ). This should resolv e this issue. Cannot d ial numbers W hen usi n[...]

51 LED Indicato rs Device LED Indic ator Status Microphone in Charger Base Steady Red Charging Steady Green Fully charged Single red flash Active phone call, both m icrophones in Charger Base, microphone s m uted via Master Mute or All Mic Mute is ON Double red flash o Active phone call, m icrophone(s ) in Charger Base, microphone is m uted . o Mic[...]

52 Device LED Indic ator Status Base unm uted Steady Red o Connected, batter y charging, phone call in progress, M aster Mute or “All M ic Mute” is ON , all Microphones are m uted. o Connected, batter y charging, no phone call in progress, Micropho ne(s) outs ide of Charger Base, “All Mic Mute” is O N , all Micro phones are muted. Green fla[...]

53 Device LED Indic ator Status Mute or “All Mic Mute” is ON, all M icrophones m uted Flashing Yellow* – Red – Y ellow* – Green Searching for a co nnection to the base The speaker will try t o re-es tablish the link for about 5 minutes, th en power off. Alternating slow Red - Green flash Speaker is not paire d to a Base Station The speake[...]

54 Technical Speci fications Models The Revolabs FLX2 System is available with a variety of configurations to provide the best audio capture in the industry. The following is a list of the available models. All of these models work with analog telephone lines. 10 -FLX2- 200 -POTS FLX2 System w/ 2 Omni Microphones 10 -FLX2- 101 -POTS FLX2 System w/ [...]

55 Microphones Dimensions M icrophones 94.2 x 24.6mm x 18.5mm (omnidirectional M icrophone) Weight 28.6g (omnidi rectional Microphone ) Bandwidth 80 -11,000 Hz from Microphone to Analog OUT. This is reduced for telephone call s based on the bandwi dth supported by the phone transpor t. Battery life (tal k time) 8 hours Charge time 2 hours Base Stat[...]

56 Regulatory Information FCC Notice to Use rs Users are not permitted to make changes or modify the equipment i n any way. Changes or modifications not expressly approved by Revolabs, Inc. could void the user‟s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condit[...]

57 Restricted use with certain medica l devices Hearing Aids Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with y our hearing aid m anufacturer to discuss alternativ es. Other Medical Devices If you use any other personal medical device, consult the manufact urer of your device to dete[...]

58 E C Declaration of Conformity Manufacturer‟s Nam e: Revolabs Manufacturer‟s Addres s: 144 N orth Road, Suite 3 250 Sudbury, MA 01776 U.S.A. Model: Model Numbers Base 10 -FLXBASEEU- PO TS Charger Base 10 -FLXCHG EU - 01 Speaker 10 -FLXSP EA KEREU- 01 Microphone Om ni 10 -FLXMIC EU - OM Microphone Directional 10 -FLXMIC EU - DR Microphone lape[...]

59 A CT A Part 68 information  This equipment compl ies with Part 68 o f the FCC rules and the require ments adopted by the ACTA. On the base o f this equipment is a lab el that contains, a mong other information, a p roduct id entifier in the format US:A AAEQ##TXXX X. If requested, this number must be p rovided to the telepho ne company .  T[...]

60 Limited Warranty and Limitation of Liability Limited Warranty Revolabs warrants to the end user (“Customer”) that this product will be free from s ignificant defects in workmanship and materials, under n ormal use and service, for one year from the date of purchase from Revolabs or its a uthorized reseller p rovided the customer provides pro[...]

61 Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW, REVOLABS EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, W HETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND , OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, O[...]

62 GPL LICENSED SOF TWA RE The following GPL licensed software is used in this product and is s ubject to the GNU General Public License version 2 (GPLv2) License Agreements included as part of this documentation: uClinux 2.6.26 BusyBox 1.2.2 Source code for this software can be obtained by contacting Rev olabs at support@revolabs.com. GNU GENERA L[...]

63 Finally, any free program is threatened constantly by software patents. W e wis h to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prev ent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at al[...]

64 itself is interactive but does not normally print such an announcement, y our work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections o f that work are not derived from the Program, and can be reaso nably considered independent and separate works in t[...]

65 If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent ac cess to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, su[...]

66 consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other sy stem and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of t[...]

67 LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMI TED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SU[...]