Roland HP-203 manuale d’uso

06-12-2N 04453801 DIC=608 * 04453801 - 02 *[...]

[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler[...]

2 Introduction Thank you, and congratulations on your choice of the HP203. To ensure that you obtain the maximum enjoyment and take full advantage of the HP203’s functionality, please read this owner’s manual carefully. You should first read the “Before You Play” section of the owner’s manual (this document). This explains how to connect [...]

3 Introduction The playing feel of a grand piano The Progressive Hammer Action II (PHA II) action gives you a weighty playing feel in the low register while becoming lighter in the high register, replicating the authentic feel of a piano. The distinctive sense of click (escapement) that you experience when softly playing a piano note is also accura[...]

4 Contents Introduction ................................................ 2 About the Manual ....................................................... 2 Conventions in this Manual ...................................... 2 Main Features ............................................................ 2 USING THE UNIT SAFELY ............................. 6 I[...]

5 Contents Various Settings ........................................ 64 Basic Operation in Function Mode .............................. 64 Changing How Grand Space is Applied (3D Mode) . 65 Keyboard Settings .................................................... 66 Specifying What the Key Transpose Will Affect (Transpose Mode) .......................[...]

6 USING THE UNIT SAFELY Do not disassemble or modify 002a Do not disassemble or modify this device. ...................................................................................... Do not repair or replace parts 003 Never attempt to repair this device or replace parts. If repair or part replacement should become necessary, you must contact yo[...]

7 USING THE UNIT SAFELY Turn off the power if an abnormality or malfunction occurs 012a If any of the following should occur, immediately turn off the power, disconnect the power cord from the AC outlet, and contact your dealer or a service center to have the device serviced. • The power cord is damaged • The device produces smoke or an unusual[...]

8 USING THE UNIT SAFELY Unplug the power cord from the AC outlet before cleaning 109a Before you clean the device, turn off the power and unplug the power cord from the AC outlet. .......................................................................................................... If there is a possibility of lightning strike, disconnect the p[...]

9 Important Notes In addition to the “USING THE UNIT SAFELY” listed on page 6, please observe the following cautions. Power Supply 301 • Do not connect this device to the same electrical outlet as an inverter-controlled device such as a refrigerator, microwave oven, or air conditioner, or a device that contains an electric motor. Depending on[...]

10 Important Notes Other Cautions 551 • Stored content may be lost due to a malfunction of the device or because of inadvertent operation. You should back up important content on USB memory as a safeguard against such loss. 552 • We cannot accept responsibility for the recovery of any content lost from internal memory or USB memory, or for the [...]

11 Important Notes USB Memory Handling 704 • When connecting USB memory, firmly insert it all the way in. 705 • Do not touch the pins of the USB memory connector, or allow them to become dirty. 708 • USB memory is made using high-precision electronic components, so please observe the following points when handling it. • To prevent damage fr[...]

12 Names of Things and What They Do [Power] switch Turns the power on/off (p. 18). [Volume] knob Adjusts the overall volume of the HP203 (p. 18). If headphones are connected, this adjusts the headphone volume (p. 20). [Brilliance] button Adjusts the tone brightness (p. 18). You can also set a number of different functions when this button and the [[...]

13 Names of Things and What They Do [Metronome/Count In] button Turns the metronome on/off (p. 37). This also lets you sound a count before the song begins, so that you can match the timing of your playing to the song (p. 39). [Tempo/Beat] button Here you can adjust the tempo and beat of the metronome (p. 37). Display This shows the sound number, s[...]

14 Names of Things and What They Do fig.Rearpanel-e.eps Input jacks (L/Mono, R) Here you can connect an audio device or another electronic musical instrument, and listen to the connected device through the HP203’s speakers (p. 81). Output jacks (L/Mono, R) You can connect an audio device or external powered speakers here to reproduce the HP203’[...]

15 Names of Things and What They Do HP-203BotomPanel1.eps USB connector You can connect this to your computer for transferring performance data (p. 83). MIDI In/Out connectors You can connect these to external MIDI devices to transfer performance data (p. 82). Phones jacks Here you can connect headphones. The HP203 lets you use two sets of headphon[...]

16 Before You Play Plug the pedal cord extending from the stand into the Pedal connector located at the back of the HP203’s bottom panel. fig.PedalCord.eps 1. Make sure that the [Power] switch located at the left side of the front panel is off (in the upward position). fig.PowerOff-e.eps 2. Turn the [Volume] knob all the way toward the left to mi[...]

17 Before You Play Attach the included music rest using the procedure described below. 1. Insert the included music rest attachment screws into the screw holes on top of the HP203, and tighten the screws slightly 2. Put the music rest between the screws and the HP203’s body. 3. While supporting the music rest with one hand, secure it in place by [...]

18 Before You Play Once you’ve got everything connected properly, you can turn on the power using the following procedure. If you fail to perform these steps in the correct order, you risk causing a malfunction or damaging your speakers. Turning the Power On 1. Turn the [Volume] knob all the way toward the left to minimize the volume. 2. Press th[...]

19 Before You Play The pedals perform the following operations. You’ll use them mainly when playing piano. fig.Pedals-e.eps Damper Pedal (right pedal) Use this pedal to sustain the sound. While this pedal is held down, notes will be sustained for an extended time even if you release your fingers from the keyboard. The length of sustain will chang[...]

20 Before You Play You can use headphones to enjoy the HP203 without disturbing those around you, such as at night. Since the HP203 has two headphone jacks, two people can also use headphones simultaneously. If you’re using only one set of headphones, you may connect them to either of the two headphone jacks. fig.Headphones-e.eps 1. Plug the head[...]

21 Before You Play A song you’ve recorded on the HP203 can be saved by copying it to separately sold USB memory (p. 60). You can also copy songs to a floppy disk using a separately sold floppy disk drive. You can also play back SMF music data or audio files (p. 42) saved on USB memory or a floppy disk. Use USB memory and floppy disk drive availab[...]

22 Listening to Demo Songs Now, try listening to demo songs. The HP203 comes with seven demo songs. The six Tone buttons and the [Twin Piano] button are each assigned one demo song. All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. No MIDI data for the music[...]

23 Listening to Demo Songs 2. Press one of the six Tone buttons or the [Twin Piano] button. The songs will play consecutively, starting with the demo song you selected. The button for the song currently being played back flashes on and off. When playback of the last song is reached, playback continues by returning to the first song and playing that[...]

24 Listening to Demo Songs 3. Press the [Piano] or [E. Piano] button. 4. Press the [Right] button or the [Key Touch] button to exit Demo mode. The indicators return to their previous state. [Brilliance] button fig.d-Pno.eps [3D] button fig.d-dmp.eps [Reverb] button fig.d-Str.eps Button Demo content Sound that is played [Piano] Hammer Noise (the sou[...]

25 Performing The HP203 features over 300 different internal sounds, allowing you to enjoy performing with sounds suitable for many different types of music. These onboard sounds are called “Tones.” The Tones are divided into six different groups, each of which is assigned to a different Tone button. The Tone “Grand Piano 1” is selected whe[...]

26 Performing You can change the touch sensitivity, or response of the keys. You can adjust the keyboard touch as appropriate for the playing strength of the person who is performing. fig.Panel-KeyTouch-e.eps 1. Press the [Key Touch] button so it’s flash. 2. Press the [-] or [+] button to select the keyboard touch. fig.d--M-.eps 3. Press the [Key[...]

27 Performing The HP203 provides a “3D Sound Control” function, which creates the sense of spatial depth that you experience when playing a grand piano. This function adds the natural resonance and spaciousness that are characteristic of an acoustic piano. fig.Panel-3D-e.eps 1. Press the [3D] button so it’s lit. The 3D Sound Control function [...]

28 Performing You can add liveliness to the sound to give it superb clarity and distinctness. fig.Panel-Dynamics-e.eps 1. Hold down the [3D] button and press the [Reverb] button. The display will show the type of dynamics sound control. fig.d-OFF.eps 2. Use the [-] [+] buttons to select the desired sound control setting. fig.d-1.eps 3. Press the [3[...]

29 Performing You can apply a reverb effect to the notes you play on the keyboard. With the reverb effect, you obtain a pleasant reverberation, making it sound as if you were performing in a concert hall or similar space. fig.Panel-Reverb-e.eps 1. Press the [Reverb] button so it’s lit. Try fingering the keyboard. The reverb effect is applied to t[...]

30 Performing The “Key Transpose” function lets you play a song at a different key. If you’re accompanying a singer, you can use the Transpose function to shift the pitch to a key that’s comfortable for the singer while you continue playing in the same familiar key (fingering). You can also use this function to transpose the pitch of your p[...]

31 Performing You can divide the keyboard into left and right areas so that two people can play the same range of pitches. This means that you’ll be able to use the keyboard as though it were two separate pianos. For example, this provides a convenient way for one person to follow along with another person’s performance to check it. fig.TwinPia[...]

32 Performing Turning Off Twin Piano 1. Press the [Twin Piano] button so its illumination is turned off. 1. Hold down the [Twin Piano] button and press the [-] or [+] button. You can choose one of the following ways in which the sound will be heard. fig.d-1.eps If you set Twin Piano mode to “2,” reverb will no longer be applied when you turn on[...]

33 Performing You can play two different sounds from a single key at the same time. This method of performance is called “Dual Play.” As an example, let’s try layering piano and strings sounds. fig.Panel-Tones-e.eps 1. Hold down the [Piano] button and press the [Strings] button. The indicators for both buttons light. Try fingering the keyboar[...]

34 Performing Changing the Tone 1 1. Press the [-] or [+] button. Changing the Tone 2 1. Hold down the Tone button for the Tone 2 (the rightmost of the lit Tone buttons), and press the [-] or [+] button. You can change the volume balance of the Tones 1 and 2. fig.Panel-Balance-e.eps 1. Hold down the [Transpose] button and press the [Split] button. [...]

35 Performing Performing with the keyboard divided at a certain key into a left side and a right side is called “Split Play,” and the point at which the keyboard is divided is called the “split point.” In Split Play, you can have a different tone sound in the left and right sides. At the factory settings the split point is set to “F 3.”[...]

36 Performing Changing the Right-hand Tone 1. Press the Tone button to choose a tone group. 2. Press the [-] or [+] button to select a variation tone. Changing the Left-hand Tone 1. Hold down the [Split] button and press the Tone button to choose a tone group. 2. Hold down the [Split] button and press the [-] or [+] button to select a variation ton[...]

37 Performing You can perform while the metronome sounds. HP203 provides a versatile Metronome function. You can adjust the volume or beat of the metronome. If a song is playing, the metronome will sound at the tempo and beat of that song. fig.Panel-Metronome-e.eps 1. Press the [Metronome] button so it’s lit. The metronome will be heard. The [Met[...]

38 Performing 1. Press the [Tempo/Beat] button to make the “Beat” indicator light. The beat is displayed. fig.d-44.eps 2. Press the [-] or [+] button to select the beat. When you record your performance, it will record in the beat that is selected. When you play back a song, the metronome’s beat will be set to the beat of that song. You can?[...]

39 Performing The volume of the metronome can be adjusted, with 11 volume levels available. This is set to “5” when the instrument is turned on. fig.Panel-MetronomeVol-e.eps 1. While holding down the [Metronome] button, press the [-] or [+] button. The display will indicate the metronome volume. fig.d-5.eps When the metronome volume is set to ?[...]

40 Playing Back Songs Here’s how to listen to the internal preset songs, songs from internal memory, or songs from USB memory (sold separately). The HP203 provides sixty-five piano songs as internal preset songs. fig.Panel-SongPlay-e.eps You can listen to songs from floppy disk by using a separately sold floppy disk drive. By using a commercially[...]

41 Playing Back Songs Fast-forward and Rewind • Press the [ ] button to move to the beginning of the next song. • Press the [ ] button to move to the beginning of the currently selected song. If you’re already at the beginning of the song, you will move to the beginning of the preceding song. • If you hold down the [ ] button while a song i[...]

42 Playing Back Songs To select a song that’s inside a folder 1. Press the [Int Song/Ext Song] button so the “Ext Song” indicator is lit. fig.d-01.eps 2. Press the [-] button. If a folder exists, a display like the following will appear. 3. Press the [ ] button. The first song in the folder will be selected. fig.d-01.eps If the folder contain[...]

43 Playing Back Songs Here’s how to repeatedly play all internal songs or external memory songs in succession. fig.Panel-SongPlay-e.eps 1. Press the [Int Song/Ext Song] button so it’s lit. 2. Use the [-] [+] buttons to select the first song. 3. While holding down the [Int Song/Ext Song] button, press the [ ] button. The display will indicate ?[...]

44 Playing Back Songs When playing back internal songs or external memory songs, you can select the performance parts that will play. You can also practice each hand separately while playing along with the song. fig.Panel-TrackMute-e.eps 1. Select the song that you want to play (p. 40). 2. Press the [ ] button to play the song. 3. Select the part t[...]

45 Playing Back Songs Here’s how to adjust the volume that a part will have after you’ve pressed a track button to mute the playback while playing back a song. The HP203 lets you play back a specific part at a reduced volume so you can use that part as a “guide” for your own playing. 1. Hold down a track button and use the [-] [+] buttons t[...]

46 Playing Back Songs You can change the tempo at which the song plays. When you’re practicing one of the internal songs, slowing down the tempo of the playback can make it easier to play along with a difficult song. 1. Press the [Tempo/Beat] button so the “Tempo” button’s indicator is lit. 2. Use the [-] [+] buttons to change the tempo. So[...]

47 Playing Back Songs The “Playback Transpose” function lets you change the key of the song playback. fig.Panel-KeyControl-e.eps 1. Play back the song that you want to hear or play along with (p. 40). 2. While holding down the [Transpose] button, use the [-] [+] buttons to adjust the pitch. The pitch of the song will change in semitone steps. T[...]

48 Playing Back Songs When playing back a commercially available CD or audio file, you can minimize the sounds that are located in the center (such as vocals). fig.Panel-CenterCancel-e.eps 1. Play back an audio file or music CD (p. 40). 2. Press the [Right] track button so its illumination is turned off. The melody or vocal sound will be minimized.[...]

49 Recording You can easily record your performances. You can play back a performance you have recorded to check what and how you played, and play melodies on the keyboard along with prerecorded accompaniment. You can perform the following types of recording. Recording just your own keyboard performance → “Recording Your Keyboard Performance”[...]

50 Recording Here’s how to record just your own keyboard performance without using an internal song. fig.Panel-RecNew-e.eps Performance Settings 1. Press the [Int Song/Ext Song] button. If the display does not show the following, press the [Int Song/Ext Song] button until this indication appears. fig.d-USr.eps Alternatively, you can get “USr”[...]

51 Recording Starting Recording 5. Press the [ ] button or play the keyboard. After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [ ] button). In this case, a count is not sounded. When recording begins, the [ ] button and [ ] button will light. During the count-in, the cou[...]

52 Recording The HP203 recorder has three track buttons. You can record the performance of each hand separately to different track buttons (for example, the left-hand performance to the [Left] button and the right-hand performance to the [Right] button), or you can re-record just a specific track of a previously recorded performance. fig.Panel-RecT[...]

53 Recording 2. Press the [ ] button. The [ ] button will light, the [ ] button indicator will flash, and the HP203 will enter recording standby mode. If you decide not to record, press the [ ] button once again. The button of the track to be recorded will flash. 3. Press the button of each track you don’t want to record, turning off its illumina[...]

54 Recording 9. Press the [ ] button. After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [ ] button). In this case, a count is not sounded. When recording begins, the [ ] button and [ ] button will light. During the count-in, the count measure is indicated in the display a[...]

55 Recording Here’s how you can play along with an internal memory song or an external memory song, and record your performance. For example, you can listen to the left-hand part while you record the right-hand part. The performance you play on the keyboard will be recorded in place of the sound of the part you select using the track buttons. The[...]

56 Recording 5. Press the track button for the part you want to record, making the button flash. This allows you to record while listening to the selected song. The [ ] button will light, the [ ] button will flash, and the HP203 will enter recording standby mode. If you decide not to record, press the [ ] button once again. How performance parts co[...]

57 Recording You can erase recorded performances. fig.Panel-RecNew-e.eps 1. Press the [Int Song/Ext Song] button. The screen for the recorded performance will appear. fig.d-USrdotExp-e.eps 2. Press the [+] button. “dEL” will start blinking in the display. fig.d-dEL.eps If you decide not to delete the song, press the [ ] button. 3. Press the [ ][...]

58 Saving Your Performance Here’s how you can completely erase all songs that were saved in internal memory, USB memory (sold separately), or a floppy disk (sold separately). Once an initialization is performed, all songs that have been saved in memory will be erased. The erased data cannot be recovered, so we recommend that you check the content[...]

59 Saving Your Performance 4. Use the [-][+] buttons to select whether you will initialize “Int” (Internal Memory) or “EXt” (USB memory or floppy disk). Internal Memory USB memory, floppy disk 5. Press the [ ] button. The display will indicate “Sur,” and the [ ] button and [ ] button will blink. If you decide not to initialize, press th[...]

60 Saving Your Performance A song you’ve recorded can be saved in internal memory, USB memory (sold separately) or floppy disk (sold separately). The songs you record will be lost if you simply turn off the HP203’s power before they’ve been saved. You’ll need to save a song if you want to keep it. A song from internal memory can also be sav[...]

61 Saving Your Performance Selecting the Save destination for the Song 4. Use the [-] [+] buttons to specify whether you want to save the song in “Int” (Internal Memory) or “EXt” (USB memory or floppy disk). Internal Memory USB memory, floppy disk 5. Press the [ ] button. A screen in which you can select the save-destination number will app[...]

62 Saving Your Performance Here’s how you can delete a previously saved song from internal memory, USB memory or floppy disk. If you want to delete all songs from internal memory, USB memory or floppy disk, refer to “Initializing the Memory” (p. 58). fig.Panel-SaveSong-j.eps 1. If you’re deleting a song from USB memory, connect your USB mem[...]

63 Saving Your Performance Selecting the Song to Delete 4. Use the [-] [+] buttons to select whether you will be deleting a song from “Int” (Internal Memory) or “EXt” (USB memory or floppy disk). Internal Memory USB memory, floppy disk 5. Press the [ ] button. A screen in which you can select the song to delete will appear. Internal Memory [...]

64 Various Settings In “Function mode” you can make various settings for performance and recording. 1. Hold down the [Brilliance] button and press the [3D] button. The [Brilliance] button and [3D] button will light. The display will indicate “Fnc” and you’ll be in Function mode. fig.d-Fnc.eps 2. Press one of the blinking buttons to select[...]

65 Various Settings This specifies how 3D Sound Control (p. 27) will be applied. 1. Hold down the [Brilliance] button and press the [3D] button. The display will indicate “Fnc” and you’ll be in Function mode. 2. Press the [Reverb] button. The display will indicate “3d” and then the value of the setting will appear. 3. Use the [-] [+] butt[...]

66 Various Settings This setting specifies what the key transpose will affect. You can use the key transpose to change the pitch of both the song and the keyboard, the pitch of only the song, or the pitch of only the keyboard. → Key Transpose (p. 30), Playback Transpose (p. 47) 1. Hold down the [Brilliance] button and press the [3D] button. The d[...]

67 Various Settings When you press the damper pedal during Dual performance or Split performance, the damper pedal effect is normally applied to both tones, but you can also select the tone to which the effect is to be applied. 1. Hold down the [Brilliance] button and press the [3D] button. The display will indicate “Fnc” and you’ll be in Fun[...]

68 Various Settings When playing ensemble with other instruments and in other such instances, you can match the standard pitch to another instrument. The standard pitch generally refers to the pitch of the note that’s played when you finger the middle A key. For a cleaner ensemble sound while performing with one or more other instruments, ensure [...]

69 Various Settings Specifying the Tonic When playing with tuning other than equal temperament, you need to specify the tonic note for tuning the song to be performed (that is, the note that corresponds to C for a major key or to A for a minor key). If you choose an equal temperament, there’s no need to select a tonic note. 4. While holding down [...]

70 Various Settings You can change the volume of the damper pedal resonance. On an acoustic piano, depressing the damper pedal makes the notes you play resonate with other strings, adding rich reverberations and fatness to the sound. The damper pedal on the HP203 recreates this resonance (Damper Resonance) when depressed. 1. Hold down the [Brillian[...]

71 Various Settings You can change the sound that’s played by the metronome. The metronome will sound when you enter the setting screen. 1. Hold down the [Brilliance] button and press the [3D] button. The display will indicate “Fnc” and you’ll be in Function mode. 2. Press the [Metronome] button. The display will indicate “MtS” and then[...]

72 Various Settings Specifies the part that will determine the beginning of the performance when adding a count-down. The count will sound before the selected part begins playing. 1. Hold down the [Brilliance] button and press the [3D] button. The display will indicate “Fnc” and you’ll be in Function mode. 2. Hold down the [Tempo] button and [...]

73 Various Settings Here you can make various MIDI-related settings for the HP203. For more about MIDI, refer to “Connecting to MIDI Devices” (p. 82). When you have a MIDI sequencer connected, set this parameter to Local Off. Since the Thru function of your sequencer will normally be turned on, notes played on the keyboard or played back by the[...]

74 Various Settings This setting specifies the MIDI channel on which the HP203 will transmit. MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI devices and specifying the appropriate MIDI channel for each device, you can play or select sounds on those devices. The HP203 will receive all sixteen channels (1?[...]

75 Various Settings Connecting the HP203 to a V-LINK compatible image device allows you to control the images with the HP203. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. V-LINK V-LINK ( ) is functionality promoted by Roland that [...]

76 Various Settings Normally, you don’t need to install a driver in order to connect the HP203 to your computer. However, if some problem occurs, or if the performance is poor, using the Roland original driver may solve the problem. Specify the USB driver you want to use, and then install the driver. 1. Hold down the [Brilliance] button and press[...]

77 Various Settings If you are playing the HP203 through a connected external system, there may be cases in which the volume from your external system is too low even when the HP203’s volume is turned to the maximum setting. In such cases, you can adjust the master gain setting as follows. Adjusting the master gain will also affect the volume of [...]

78 Various Settings You can connect a commercially available USB CD drive to the HP203, and play back separately sold CD-ROMs created for the VIMA (VIMA TUNES). Songs on VIMA CD-ROM (VIMA TUNES) are programmed with “recommended tones” suitable for each song. When you select a song from a VIMA CD-ROM (VIMA TUNES), recommended tones will be assig[...]

79 Various Settings The settings you’ve changed in Function mode can be restored to their factory-set condition. This operation is called “Factory Reset.” Execute this operation if you want the settings you’ve stored using Memory Backup to be returned to their original state. When you execute “Factory Reset,” all settings you’ve store[...]

80 Connecting to Other Devices You can connect audio devices to play the sound of the HP203 through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. Use phone plug audio cables (sold separately) to make connections. 1. Turn the volume all the way down on the HP203 and on the device you?[...]

81 Connecting to Other Devices 1. Turn the volume all the way down on the HP203 and on the audio device you’re about to connect. 2. Turn off the power to the HP203 and connected audio device. 3. Use audio cables (sold separately) to make the connection. 4. Switch on the connected audio device. 5. Switch on the HP203. 6. Adjust the volume level on[...]

82 Connecting to Other Devices By connecting an external MIDI device and exchanging performance data, you can control one device from the other. For instance, you can output sound from the other instrument or switch Tones on the other instrument. When the HP203 is connected to a MIDI sequencer, set it to “Local Off.” Refer to p. 73. Making the [...]

83 Connecting to Other Devices The following become possible once you connect a USB cable (available separately) between the USB (MIDI) connector located to the lower left of the front of the HP203 and the USB connector of your computer. • You can use the HP203 to play sounds from SMF music files played back with MIDI software. • By exchanging [...]

84 Troubleshooting If you think there’s a problem, read this first. Symptom Cause/Action Page Power does not turn on Is the power cord connected correctly? p. 16 Pedal does not work, or is “stuck” Is the pedal connected correctly? Plug the cable firmly into the pedal connector. p. 16 If you disconnect the pedal cable from the HP203 while the [...]

85 Troubleshooting Notes don’t sound right Pitch of the keyboard or song is incorrect Could you have made Key Transpose settings? p. 30 Is the Master Tune setting appropriate? p. 68 Is the setting for the Temperament correct? p. 68 Sounds are heard twice (doubled) when the keyboard is played Is the HP203 in Dual performance? p. 33 When the HP203 [...]

86 Troubleshooting Low notes sound wrong, or are buzzy If you don’t hear this in headphones: Performing at high volumes may cause the speakers or objects near the HP203 to resonate. Fluorescent lights or glass doors may also resonate sympathetically. In particular, this is more likely to occur for lower notes and higher volumes. You can take the [...]

87 Error Messages * External Media: USB memory, Floppy Disk, CD-ROM, etc. Indication Meaning Error: 1 You can only read the music file. It can not be saved. Error: 2 An error occurred during writing. The external media’s protect tab may be in the “Protect” (writing prohibited) position, or the external media may not yet be initialized. Error:[...]

88 Tone List Piano E.Piano Organ Strings Voice * Tones indicated by ”*” are suitable for playing layered with a piano tone. Others 1 Grand Piano1 2 Piano + Str. 3 Harpsichord 4 Grand Piano2 5 Piano+Choir 6 Honky-tonk 1 Pop E.Piano 2 FM E.Piano 3 Vibraphone 4 Celesta 5 ’60s E.Piano 6 Clav. 7 Morning Lite 1 ChurchOrgan1 2 ChurchOrgan2 3 Combo J[...]

89 Tone List 32 EP Phase 33 Harpsichord 34 Coupled Hps. 35 Harpsi.w 36 Harpsi.o 37 Clav. 38 Pulse Clav. 39 Celesta 40 Glockenspiel 41 Music Box 42 Vibraphone 43 Vibraphone w 44 Marimba 45 Marimba w 46 Xylophone 47 TubularBells 48 Church Bell 49 Carillon 50 Santur 51 Organ 1 52 TremoloOrgan 53 ’60s Organ 54 Organ 2 55 Perc.Organ 1 56 Chorus Organ [...]

90 Tone List 143 French Horn1 144 French Horn2 145 Brass 1 146 Brass 2 147 Synth Brass1 148 Synth Brass3 149 AnalogBrass1 150 Jump Brass 151 Synth Brass2 152 Synth Brass4 153 AnalogBrass2 154 Soprano Sax 155 Alto Sax 156 Tenor Sax 157 Baritone Sax 158 Oboe 159 English Horn 160 Bassoon 161 Clarinet 162 Piccolo 163 Flute 164 Recorder 165 Pan Flute 16[...]

91 Tone List * In the tone group “Others” when you hold down the [-] or [+] button to switch tone in succession, the tones will stop changing at number 006 and number 015. To select the next sound, release the [-] or [+] button, then press it again. 254 Car Pass 255 Car Crash 256 Siren 257 Train 258 Jetplane 259 Starship 260 Burst Noise 261 App[...]

92 Tone List * - - - - - : No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 High-Q Slap Scratch[...]

93 Tone List * - - - - - : No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 High-Q Slap Scratch[...]

94 Tone List * - - - - - : No sound. * [EXC]: will not sound simultaneously with other percussion instruments of the same number. 27 28 29 31 33 35 30 32 34 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 ----- ----- ----- -[...]

95 Internal Song List * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. * No data for the music that is played will be output from MIDI OUT. 1 La Fille aux Cheveux de Lin 2 La Campanella 3 Trio Grande 4 Scherzo No.2 5 Sonate No.15 6 Liebesträume 3 7 Étud[...]

96 Parameters Stored in Memory Backup Settings stored immediately, whenever a change is made (Memory Backup procedure not needed) Brilliance (On/Off, Brilliance) p. 18 Key Touch p. 26 3D Sound Control (On/Off, Depth) p. 27 Dynamics Sound Control (Off, Type) p. 28 Reverb (On/Off, Depth) p. 29 Dual Balance p. 34 Split Point p. 36 Twin Piano Mode p. 3[...]

97 Music Files That the HP203 Can Use What Are Music Files? Music files contains musical information such as how long the key for a corresponding pitch is played, the force applied to the key played, and other such information. When the performance data (music file) is sent by your computer or similar device, the song will be played exactly as spec[...]

98 MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Prog Change System Exclusive System Common System Real Time Aux Message Notes Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note ON Note OFF Key’s Ch’s 0, 32 1 5 6, 38 7 10 11 64 65 66 67 [...]

99 Main Specifications HP203: Digital Piano <Keyboard> Keyboard 88 keys (PHA II with Escapement) Touch Sensitivity Touch: 5 levels/Fixed Touch Hammer Response: Off/1–10 Keyboard Mode Whole, Dual (volume balance adjustable), Split (split point adjustable), Twin piano <Sound Generator> Conforms to GM2/GS/XG Lite Max. Polyphony 128 voice[...]

100 Main Specifications *1 A list of the CD drives that have been tested and found to be compatible is available on the Roland website. http://www.roland.com/ In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. <Internal Memory> Songs Max. 99 songs Save Song Sta[...]

101 Index Numerics 3D Mode .......................................................... 65 3D Sound Control .............................................. 27 A AC INLET .................................................... 14, 16 Accomp Track ................................................... 72 Adjuster ..............................................[...]

102 Index O Octave Shift ...................................................... 66 P Panel Lock ......................................................... 79 Parameters ........................................................ 96 Pedal ................................................................ 19 PEDAL Connector ................................[...]

This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouill[...]

As of November 1, 2006 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. EGYPT Al Fanny Trading Office 9, EBN Hagar A1 Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: 20-2-417-1828 REUNION Maison FO - YAM Marcel 25 Rue Jules H[...]

[...]

06-12-2N 04453801 DIC=608 * 04453801 - 02 *[...]