Ryobi Outdoor PBC3046E manuale d’uso

OPERA T OR'S MANU AL String T rimmer / Brushcutter PBC3046E R Y70105 Y our new trimmer has been engineered and manuf actured to Ryobi’ s high standard for dependability , ease of operation, and operat or saf ety . Proper ly cared f or , it will give y ou years of rugged, trouble-free perf or mance. Thank you f or buying a Ry obi tr immer . W[...]

2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols ........................................................................................................................[...]

3 SAFETY ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburetor adjustments. ■ ■ ■ ■ ■ It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud?[...]

4 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Read Your Operato[...]

5 SYMBOLS TECHNICAL D A T A Weight W it hout fuel and cutting a ttachment ............................................................................................... ....... 6.3 Kg With blade ..................................................................................................................... ...................... 6.62 Kg With [...]

6 FEA TURES Fig. 1 THROTTLE TRIGGER ST ARTER GRIP ENGINE HOUSING FRONT HANDLE IGNITION SWITCH TRI-ARC BLADE BLADE GUARD SHAFT STRAP HANGER SHOULDER STRAP GEAR HEAD COUPLER KNOB GRASS DEFLECTOR CUTTING LINE LINE CUT OFF BLADE THROTTLE INTERLOCK UNP A CKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■[...]

7 ATTACHING THE POWER HEAD TO THE TRIMMER ATTACHMENT See Figure 2. ASSEMBL Y REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: 1. Loosen the knob. 2. Push in the button and twist the shafts to remove and separate ends. ATTACHING THE STORAGE HANGER See Figure 3. There are two ways to hang your attachment for storag[...]

8 ATTACHING THE HANDLE See Figure 4. A barrier handle should be used for ensuring the best control and maximizing operator saf ety . 1. Place the handle base and the bracket on the shaft housing belo w the spacer . 2. Install the two handle base screws and nuts, but do not tighten completely . 3. Place the front handle grip onto the handle base and[...]

9 Fig. 6 SCREWS MUFFLER GUARD REAR HOUSING BENT END OF MUFFLER GUARD OPENING IN REAR HOUSING MUFFLER GUARD See Figure 6. 1. Remove muffler guard and two screws from the owner's kit. 2. Attach the muffler guard to the rear housing. NOTE: Make sure the bent end of the muffler guard fits securely into the opening of the rear housing. 3. Using the[...]

10 ASSEMBL Y BLADE GUARD See Figure 8. 1. Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in.) from the top of the mounting bracket through the blade guard and into the threaded mounting plates. 2. Using the torx wrench supplied, tighten all four screws securely. NOTE: When using the string head, the string shie[...]

11 ASSEMBL Y BLADE GUARD BLADE CUPPED W ASHER BLADE NUT HOLDING PIN Fig. 10 WRENCH (13 mm) UPPER FLANGE W ASHER INSTALLING THE BLADE See Figure 10. 1. Place the upper flange washer over the gear shaft with the hollow side toward the blade guard. 2. Center the blade on the upper flange, making sure the blade sits flat. Install the cupped washer with[...]

12 FUEL AND REFUELING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care, it is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapors. ■ ■ ■ ■ ■ Do not let gasoline or oil come in contact with your skin. ■ ■ ■ ■ ■ Keep gasoline and oil [...]

13 OPERA TION ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1. Run engine at full throttle. 2. Tap string head on ground to advance string. String advances each time the head is tapped. 3. Several taps may be required [...]

14 OPERA TION W ARNING Extreme care must be taken when using blades to insure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating. Use a firm grip on both handles. ■ Main[...]

15 W ARNING Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. TO START A COLD ENGINE: 1 Lay trimmer on a flat, bare surface. 2 Push primer bulb 8 to 10 times. NO TE: Do not squeeze the throttle trigger bef ore engine star ts. Squeezing the throttle tr igger at this time will pre v ent the uni[...]

16 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the muffler. ■ Make sure all guards, straps, deflec[...]

17 MAINTENANCE STRING REPLACEMENT See Figures 20 and 21. 1. Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2. Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3. Cut two pieces of string, each being[...]

18 MAINTENANCE CLEANING THE EXHAUST PORT AND MUFFLER Depending on the type of fuel used, the type and amount of oil used, and/or your oper ating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, a qualified service technician will need to remove these deposits to[...]

19 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged. Replace fuel cap if required. SPARK PLUG This engine uses a Champion RCJ-6Y with 0,63 mm (.025 in.) electrode gap. Use an[...]

20 PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POS POS POS POS POS SIBLE CA SIBLE CA SIBLE CA SIBLE CA SIBLE CA USE USE USE USE USE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT A CT Y OUR A UTHORIZED SER VICE DEALER. TR OUBLESHOO TING 1. Check spark. Remove spark plug. Reattach the spark plug cap and la[...]

21 NO TE: The carburetor adjustment needle(s) are equipped with plastic cap(s) that prevents counterclockwise rotation from the original factory adjustment. If your unit exhibits specific perf or mance problem(s) where the T roub le Shooting Section recommends a counterclockwise needle adjustment and no adjustments have been made since original pur[...]

22 SOUND POWER/PRESSURE & HANDLE VIBRATION CHART FOR STRING TRIMMERS / BRUSHCUTTERS Information on Noise Emission per European Machine Safety Directive 98/37/EC. The individual equipment listed was operated in a manner consistent with normal working conditions. The A-weighted sound pressure le vel (LpA) at the operator’ s ear and the A-weight[...]

23 NO TES[...]

OPERA T OR'S MANU AL String T rimmer / Brushcutter PBC3046E R Y70105 983000-202 1-03 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany T el.: +49 (0)2103 / 29 58 0 F ax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ry obi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Ry obi T echnologies BP 50012 - 9[...]