Samsung 1200NF manuale d’uso

SyncMaster 1200 NF Color Monitor Owner’ s Instructions 12NF(E)COV.fm Page i Tuesday, October 17, 2000 5:12 PM[...]

Information in this document is subject to change without notice. © 2000 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or c[...]

English 1 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking Y our Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

English 2 1 Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designa- tion of the DC adapter corresponds to the local electrical supply . 2 Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. 3 T o avoid electric shock, never touch the inside of the monitor .[...]

English 3 Unpacking Y our Monitor Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . Manual Monitor and Stand Signal Cable Warranty Card (Not available in all locations) V V V V R BNC Cable (Option) Install driver Power Cord USB Cable USB Diskette 12NF(E)body.fm Page 3 Tuesday, Octo[...]

English 4 Setting up Y our Monitor Connecting Y our Monitor Figure 1. Cable connections 1 T urn off your computer and unplug its power cord. 2 Connect the signal cable to the D-SUB or BNC signal port on the back of your monitor . 3 If you are using an IBM-compatible computer , skip to step 5. If you are using a Macintosh computer , connect the othe[...]

English 5 Setting up Y our Monitor Plug and Play Our adoption of the new VESA ® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Y our PC system can easily identify and configure itself for use with your displ[...]

English 6 Setting up Y our Monitor Windows ® 95 T o determine the version of Windows ® 95 that your computer uses, right click on the My Computer icon on the Windows desktop and select Properties . The version number can be seen on the General section under “System”. Follow the directions given below according to the version of your Windows ?[...]

English 7 Setting up Y our Monitor Figure 2. Monitor self test screen The three boxes inside the border are red, green and blue. Failure of any of the boxes to appear indicates a problem with your monitor . This box also appears during normal operation if the video cable becomes disconnected or damaged. 4 T urn off your monitor and reconnect the vi[...]

English 8 Adjusting Y our Monitor User Controls Y our Samsung SyncMaster computer monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor . These buttons operate the On Screen Display , which shows you the monitor’ s settings and [...]

English 9 Adjusting Y our Monitor Automatic Save Whenever you open the on screen display and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor . User areas are reserved according to th[...]

English 10 Adjusting Y our Monitor Menu Features The following features can all be accessed using your monitor’ s on screen display system. Follow the instructions below to adjust the features. Once you are finished making adjustments to a feature, push the EXIT button to return to then push EXIT again to turn off the menu. Position Follow these [...]

English 11 Adjusting Y our Monitor Zoom Follow these instructions to get a close-up or a longshot view of the monitor’ s viewing area. 1 With the menu off, push the button. Push the button or button until the “Position / Size” screen is displayed. 2 Push the button or button to select Zoom . 3 Push the button to open the Zoom adjustment scree[...]

English 12 Adjusting Y our Monitor Pincushion/T rapezoid Adjust the pincushion setting when the sides of the display are bowed in or bowed out; adjust the trapezoid setting when the top or bottom of the display is too large or small. 1 With the menu off, push the button. Push the button or button until the “Geometry” screen is displayed. 2 Push[...]

English 13 Adjusting Y our Monitor Pinbalance/Linearity Adjust the pinbalance setting when the sides of the display are bowed towards the left or right. Adjust the linearity setting when the display image is compressed at the left, right or top, bottom. 1 With the menu off, push the button. Push the button or button until the “Geometry” screen [...]

English 14 Adjusting Y our Monitor PinBalance Corner Adjust the Pinbalance Corner correction when the sides of the display are bowed in or bowed out; adjust the side pinbalance corner correction when the top or bottom of the display is too large or small. 1 With the menu off, push the button. Push the button or button until the “Geometry” scree[...]

English 15 Adjusting Y our Monitor Color Color temperature is a measure of the “warmth” of the image colors. The available range is between 5000 to 9300. Follow these steps to change the color temperature and adjust individual R, G, B color control. 1 With the menu off, push the button. Push the button or button until the “Color” screen is [...]

English 16 Adjusting Y our Monitor Clear Moire A “moiré” pattern can appear on your screen, looking like a series of concentric circles or arcs. T o eliminate this pattern, use the Clear Moire adjustments. 1 With the menu off, push the button. Push the button or button until the “Screen” OSD is displayed. 2 Push the button or button to sel[...]

English 17 Adjusting Y our Monitor Purity Adjusts the color purity of the overall image. 1 With the menu off, push the button. Push the button or button until the “Screen” OSD is displayed. 2 Push the button or button to select Purity . 3 Push the button to access the purity adjustment screen. 4 Use the button or button to select the adjustment[...]

English 18 Adjusting Y our Monitor Sharpness Adjusts the sharpness of the overall image. 1 With the menu off, push the button. Push the button or button until the “screen” is displayed. 2 Push the button or button to select Sharpness . 3 Use the button or button to adjust Nomal or T ext. Recall Use the recall feature to reset Screen settings to[...]

English 19 Adjusting Y our Monitor Degauss Use the recall feature to reset Advenced settings to their original level. 1 With the menu off, push the button. Push the button or button until the “Advanced” screen is displayed. 2 Push the button or button to select Degauss . 3 Push the button to execute the degauss function. The degaussing screen w[...]

English 20 Adjusting Y our Monitor Sync. Input T ype Use this menu to set your monitor to the corrent type of synchronization. Select “Separate” if the computer is sending a separate synchronization signal. Select “Sync. on Green” if the computer expects the monitor to synchronize with the green signal it sends. Refer to your computer or vi[...]

English 21 Adjusting Y our Monitor D-SUB/BNC Use this menu to choose between the signal source connected to the BNC connector input and the signal source connected to the D-SUB connector input. 1 With the menu off, push the button. Push the button or button until the “Advanced” screen is displayed. 2 Push the button or button to select D-SUB/BN[...]

English 22 Adjusting Y our Monitor Menu Position Y ou can change the position where the OSD menu appears on your monitor . 1 With the menu off, push the button. Push the button or button until the “Menu” screen is displayed. 2 Push the button or button to select Menu Position . 3 Push the button to open the menu position adjustment screen. 4 Us[...]

English 23 Adjusting Y our Monitor Languages Follow these steps to change the language used in the menu. The language chosen affects only the language of the OSD. It has no effect on any software running on the computer . 1 With the menu off, push the button. Push the button or button until the “Menu” screen is displayed. 2 Push the button or b[...]

English 24 Appendix PowerSaver This monitor has a built-in power management system called PowerSaver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer[...]

English 25 Appendix T roubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer . T able 2. T roubleshooting problems Symptom C[...]

English 26 Appendix Specifications T able 3. Specifications Picture T ube 55cm (22") Full square type [50.8 cm (20”) Viewable] Flat face, 90° Deflection Dot pitch : 0.24mm Multi-Layer treatment with anti-electrostatic properties Medium-short persistence phosphor Synchronization Horizontal : 30 kHz to 121 kHz (Automatic) V ertical : 50 Hz[...]

English 27 Appendix Pin Assignments Figure 1: Male T ype Figure 2: Male T ype T able 4. 15-Pin D-SUB connector Sync. T ype 15-Pin Side of the Signal Cable (Figure 1) Cable Adapter (Figure 2) Pin No. Separate Composite Sync on Green Apple MacII 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red Green Blue GND DDC Return GND-R GND-G GND-B Reserved GND-Sync./Sel[...]

English 28 Appendix NC = No Connection Display Modes For the display modes listed below , the screen image has been optimized during manufacture . T able 5. BNC Connectors Signals Sync-On-Green Composite Sync. Separate Sync. R Red Red Red G Green+Sync. Green+Sync. Green B Blue Blue Blue H/V NC H/V Comp. Sync. H-Sync. V NC NC V-Sync. T able 6. Prese[...]

English 29 A Advanced , 19 Automatic Save , 9 Autosize button , 8 B BNC , 21 Brightness , 8 C CAUTION , 2 Convergence , 17 Clear moiré , 16 Color , 15 Contrast , 8 D Degauss , 19 D-SUB , 21 E EXIT ( ) button , 8 F Focus , 16 G Geometry , 12 I Information , 9 Information ( ) button , 8 L Languages , 23 Linearity , 13 M MENU ( ) button , 8 Menu dura[...]

Français Deutsch Español Portuguese English Italiano Regulator y Infor mation FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of t[...]

U.S.A. : Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 T el. : 1-800-SAMSUNG (1-800-726-7864) CANADA : Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 T el. : 1-800-SAMSUNG (1-800-726-7864) Fax. : (905) 542-1199 GERMANY : Samsung Electronics GmbH Samsung-Haus, Am Kronberger Hang 6 65824 Sc[...]