Samsung 52V manuale d’uso

SAMTRON 52V / 72V[...]

User’s Manual Safety Ins truct ions Failure to fo llow dire ctions noted by this sym bol could resul t in bodily har m or damage to e quipment. Notational W arning/Caution Notation Conventions Prohibi ted Important to read an d understand at all ti mes Do no t disassem ble Disconne ct the plug from the outlet Do no t touch Grounding to prevent an[...]

User’s Manual Safety Ins truct ions When not used for ex tended perio ds of time, s et your PC to DPMS. If u sing a scree n saver, set it to the active s creen mode . • Do not use a dama ged or loose plug. • This ma y cause an el ectric sh ock o r fire. • Do not pull the plug out by the wire nor touch the pl ug with wet hands. • This ma y[...]

User’s Manual Safety Ins truct ions • Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. • Failure to do so may cause an e lectric s hock or fir e. • Do not connect too many extension cords or plugs to an outlet. • This ma y ca use a f ire. Power[...]

User’s Manual Safety Ins truct ions • Do not cover the vents on the monitor cabi net. • Bad ve ntil ation may c ause a breakd own or fire. • Put your monitor in a location with low humidity and a minimum of dust. • An el ectr ic shoc k or fi re co uld res ult in side t he mon itor. • Do not drop the monitor when moving it. • This may [...]

User’s Manual Safety Ins truct ions • Do not place the monitor fac e down. • The TFT-LCD surface may be damaged. Installation[...]

User’s Manual Safety Ins truct ions • Do not spray detergent dir ectly on the monitor. • Use the recomm ended detergent with a smooth cloth. • If the connector between the plug and the pin i s dusty or dirty, clean it properly with a dry cloth. • A dirty connecto r can caus e an e lectric shoc k or fire • Do not set a glass of wat er, c[...]

User’s Manual Safety Ins truct ions • Do not remove cover(or back). No user servic eable parts inside. • This ma y cause an elect ric sh ock or a fi re. • Refer serv icing to qualifie d service pe rsonnel. • If your monitor does not operate norma lly - in particular, if there are a ny unusual sounds or smel ls coming from it - unplug it i[...]

User’s Manual Safety Ins truct ions • Do not try to move the monitor by pulling on the wir e or the signal cable. • This ma y cause a breakd own, elec tric shoc k or a fire due to d amage to the cabl e. • Do not move the monitor right or left by pulling o nly the wire or the s ignal cabl e. • This ma y cause a breakd own, elec tric shoc k[...]

User’s Manual Introduction Please make su re the following items ar e included with your monitor. If any items are missing, contact yo ur dealer . Monitor and Stand Power Cord Signal Cable Quick Set up Guide Warranty Card (Not available i n all locations) User's Guide and Driver Installati on CD Unparking[...]

User’s Manual Introduct ion Front 1. Auto button / Exit button Use this button to auto adjustme nt direct ac cess. / Use this button to Exi t the active menu or the OSD. 2. Menu button These bu ttons allow y ou to highl ight and adj ust items in the menu. 3. Power button Use this button to turn the monitor on and off. 4. Adjust buttons These bu t[...]

User’s Manual Introduct ion (The configuration at the back of the moni tor may vary from pr oduct to product.) 1. Power port : Connect the power cord for your m onitor to the power p ort on the b ack of the monitor . 2. Signal ca ble : Connect the end of the signal cab le to your computer's vid eo port. (video board, vid eo card or graphics [...]

User’s Manual Setup Connecting Y our Monito r 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the monitor to the Macintosh computer using the D-SUB c[...]

User’s Manual Setup When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Int[...]

User’s Manual Setup Windows XP/2000 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" . 3. Choose your monitor model in the model list, then click the "OK" button. 4. Click the " Install " button in the " Warning " window. 5. If you can see following "Message" window, then clic[...]

User’s Manual Setup When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Int[...]

User’s Manual Setup 4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and [...]

User’s Manual Setup 8. If you can see following " Message " window, then click the " Continue Anyway " button. Then click " OK " button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on SAMTRON Monitor Homepage http://www. samtr[...]

User’s Manual Setup 10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose " OK " button on the " Insert disk " window. 2. Click the " Browse " button on the " File Needed [...]

User’s Manual Setup 8. Click the " Have Disk " button 9. Specify A:(D:driver) then click " OK " button. 10. Select " Show all devices " and choose the monitor that corresponds to the one you connected to your computer and click " OK ". 11. Continue choosing " Close " button and " OK " [...]

User’s Manual Setup Removing the base 1 Turn off your mon itor and unplu g its power cord . 2 Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3 Remove the four screws and then remove the Stand from the LCD monitor. Installing VESA compli ant mounting[...]

User’s Manual Setup Attaching a base NOTE : This monitor accepts a 75mm x 75mm VE SA-compliant mounting interface pad. 1 Rear cover mounting pad 2 Mounting i nterface pad Align th e Mounting Inte rface Pad with t he hole s in the Rear Co ver Moun ting Pad a nd secure it with the four screws tha t came with t he arm- type base, w all mo unt hang e[...]

User’s Manual On-Sc reen Di splay 1. Use this button to open the OSD and activate a highlighted menu item. 2 . 3 U s e t h e s e bu t tons to highlight a nd a dju s t i t e ms u s ing t he On S c r ee n Di s pl a y . 3 . U s e this button t o E x it the a c ti v e m e nu or the O S D[...]

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is th[...]

The screen shows strange colors or just black and white. Is the screen displaying only one color as if looking at the screen through a cellophane paper? Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Have the screen colors become strange after running a program or due to a crash between applications[...]

Check the following items if there is trouble with the monitor. 1. Check if the power cord and the cable are properly connected to the computer. 2. Check if the computer beeps more than 3 times when booting. (If it does, request an after-service for the main board of the computer.) 3. If you installed a new video card or if you assembled the PC, ch[...]

User’s Manual T roubleshoot ing Q&A Question Answer How can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows ME/XP/2000: Set[...]

User’s Manual T roubleshoot ing Your mon itor provid es a self te st feature that allows y ou to ch eck whethe r your mo nitor is funct ioning properly. 1. Turn off bot h your com puter and the monito r. 2. Unplug the video cabl e from the back of the c omputer . 3. Turn on the mon itor. . If the moni tor is func tioning pro perly, yo u will see [...]

User’s Manual T roubleshoot ing If there is somethi ng wrong wi th the inp ut signal, a m essage a ppears on th e screen o r the scre en goes blank althoug h the pow er indi cator LED is sti ll on. Th e message may indicat e that the monitor i s out o f scan range or that you need to check the sign al cable . The locati on and the position of the[...]

User’s Manual Specificat ions G e neral General Model Name SAMTRON 52V LCD Panel Size 15.0 inch diagona l Disp la y are a 304,1 (H) x 228, 1 (V) Pixel Pitch 0,297 (H) x 0,29 7 (V) Type a-si TFT active matr ix Viewing Angle 140/120(L,R/T, B) Sync hroni zatio n Horizontal 31 ~ 61 kHz Vert ical 56 ~ 75 Hz Display Color 16.294.277 Color s Reso lut io[...]

G e neral User’s Manual Specificat ions This monitor can be installed on any Plug & Play comp atible system. Inter action of the mo nitor and computer systems will provide the best opera ting conditions and mon itor settings. In most case s, monitor installation will pr oceed automatically, unle ss the user wishes to select alternate settings[...]

User’s Manual Specificat ions P o w e r S a v er This mo nitor has a built-in p ower managem ent system ca lled PowerSaver . This system saves energy b y switching your monit or into a low-p ower mode when it has not been use d for a certain amount o f time. The monitor auto matically retu rns to norma l operation whe n you move th e compute r&ap[...]

User’s Manual Specificat ions If the si gnal transf erred from the compu ter is the s ame as th e followin g Preset T iming Modes , the sc reen will b e adjuste d automati cally. H owever, if th e signal di ffers, the screen ma y go blan k while th e power LED i s on. Refer to the video ca rd manual and adju st the scr een as fol lows. Table 1. P[...]

User’s Manual Specificat ions G e neral General Model Name SAMTRON 72V LCD Panel Size 17.0 inch diagona l Disp la y are a 337.92 (H) x 270 .336 (V) Pixel Pitch 0.264 (H) x 0.26 4 (V) Type a-si TFT active matr ix Viewing Angle 140/120(L,R/T, B) Sync hroni zatio n Horizontal 31 ~ 81 kHz Vert ical 56 ~ 75 Hz Display Color 16,294,277 colo rs Reso lut[...]

G e neral User’s Manual Specificat ions TFT LCD panel m anufactured by using advanced se miconductor techn ology with precision o f 99.999% above is use d for this produ ct. But the pixels of RE D, GREEN, BLUE and WHITE colo r seem to be brigh t sometimes or so me of black pi xels cou ld be seen. This is n ot from bad quality and you can use it w[...]

User’s Manual Specificat ions P o w e r S a v er This mo nitor has a built-in p ower managem ent system ca lled PowerSaver . This system saves energy b y switching your monit or into a low-p ower mode when it has not b een used fo r a certain amount o f time. The monitor auto matically retu rns to norma l operation whe n you move th e compute r&a[...]

User’s Manual Specificat ions If the si gnal transf erred from the compu ter is the s ame as th e followin g Preset T iming Modes , the sc reen will b e adjuste d automati cally. H owever, if th e signal di ffers, the screen ma y go blan k while th e power LED i s on. Refer to the video ca rd manual and adju st the scr een as fol lows. Table 1. P[...]

User’s Manual Infor mation S e rvi c e Infor mation Service SAMTRON SEOUL : 15TH FL, JOONGANG DAILY NEWS BLDG. 7, SOONHWA-DONG,CHUNG-KU, SEOUL, KOREA, 100-759 TEL : ( 82-2) 727-311 4 SAMTRON U.S.A. SAMTRON COMPUTER PRODUCTS CUSTOMER SERVICE 400 Valley Road Suite 2 01, Mt. Arlin gton, NJ 078 56 TEL : 973-601 -6200, FAX : 97 3-601-6001 1-800-SAMTRO[...]

User’s Manual Infor mation • Dot Pitch The image on a monitor is composed of re d, green and blue dots. The closer the dots, the higher the resolut ion. The distance between two dot s of the same color is called the 'Dot Pitch'. Unit: mm • Vertical Freq uency The screen mus t be redrawn several t imes per second in order t o create [...]

Regulatory User’s Manual Infor mation FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed [...]

User’s Manual Infor mation • IC Compliance Notice This Clas s B digital apparatu s meets a ll requireme nts of the Canadian In terference -Causin g Equipme nt Regulation s of ICES-003. Cet a pp a r e il Nu m é r i q u e d e c l a ss e B r e s p e c t e t o ut e s l es e x i g en c es du R è g l e m ont NMB- 03 s ur l e s équipemen ts produis[...]

User’s Manual Infor mation • TCO'95-Ecological requirements for personal computers (TCO appli ed model only) AB general requirement s AB2 Writte n Eco-d ocument acom panying the produ cts Congratul ations! You h ave just pu rchase d a TCO'9 5 approved a nd labell ed produ ct! Your choice has provide d you with a pr oduct dev eloped fo[...]

User’s Manual Infor mation What does l abelling involv e? ( continue ) TCO Develo pment Unit 199 6-11-29 On the pag e this fol der you wil l find a b rief summa ry of the environme ntal requir ements me t by th is produc t. The com plere en vironme ntal criteri a docu ment may be order ed from: TCO Dev elopme nt Unit S-11494 Sto ckholm Sweden Fax[...]

User’s Manual Infor mation • TCO'99-Ecological requirements for personal computers (TCO appli ed model only) Congratulat ions! You have just pur chased a T CO'99 appr oved and la belled pr oduct! Your choice ha s pr ovided you w ith a product developed for professi onal use . Your purc hase has a lso c ontributed t o reduci ng the bur[...]

User’s Manual Infor mation TCO Development SE-114 94 Stockhol m, Sweden Fax: +4 6 8 782 92 0 7 Email ( Internet) : develo pment@tco .se Current info rmation reg arding TCO '99 approv ed and lab elled produ cts may a lso be obtain ed vi a the Intern et, using the address: http:/ /www.tco-info. com/ Environment al requirements Flame retar dant[...]

User’s Manual Infor mation • Medical Requirement Classificat ions: In accordance wit h UL 2601-1/IEC 60601-1, the product is cssi fied as Continuous duty Cla ss I equipment, which is not protected against ingr ess of liquids. The produc t is not suitable for use in the presence of a fl ammable anaesthetic mixtur e with air or with oxygen or nit[...]

User’s Manual Infor mation For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) in co ntrol panel of computer as described below to enj oy the best quality of picture. You can have an uneven quality of picture in the screen if the best qu ality of picture is not provided in TFT-LCD. { Res o l u t i on: 1024 x [...]

User’s Manual Infor mation I n f ormat i on i n th i s do c u m ent i s subje c t to change wi t hout not i ce. ® 200 3 Sa m su n g E l ect r onics Co . , Ltd. A l l r i gh t s r eserved. Reproductio n in any m anner wha tsoever wi thout the wr itten permi ssion of Samsung Electroni cs Co., Ltd . is stric tly forbid den. Samsung Electroni cs Co.[...]