Samsung 540B manuale d’uso

Install drivers Install programs SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N / 940Be[...]

Notational Failure t o follow d irections noted by this sym bol could re sult in bodily harm or dam age to equipme nt. Prohibited Important to read and u nderstand at all times Do not disassemble Disc onnect the plug from the outl et Do not touch Groundi ng to preven t an electric s hock Power When not used for an e xtended peri od of time, set you[...]

Do not use a damaged or loose plug. z This ma y cause a n electric shock or fi re. Do not pull the plug out by the wire n or touch the plug w ith wet hands. z This ma y cause a n electric shock or fi re. Use only a p roperly grounded plug and recepta cle. z An improp er ground may cause elect ric shock or equipment da mage. Insert the pow er plug f[...]

Be sure to contact an authorized Service Center, when install ing your mo nitor in a locati on with th e heavy dust, high or low tem peratures, h igh humidity, chemical substan ce and where it operates for 24 hours such as the airport, t he train station or et c. Failure t o do so may cause a s erious damage to your mon itor. Put your monito r in a[...]

Set down the mon itor carefully. z The moni tor could b e damaged or broken. Do not pl ace the monitor fa ce down. z The T FT-LCD surface may be dam aged. Instal ling a wall bracket must be done by a qualified profes sional. z Inst allation by unq ualified pe rsonnel ma y result in injury. z Always use the mount ing device specifie d in the owner&a[...]

Use the recommended deter gent with a sm ooth cloth. If the conne ctor between the plug and the pin is d usty or dirty, clean it properly with a dry cloth. z A dirty c onnector ma y cause an ele ctric shock or fire. Make sure to unp lug the power c ord before cleaning the product. z Otherw ise, this may cause el ectric shock or fire. Unplug the pow[...]

Keep the produc t away from places exposed to oil, smoke or moisture ; do not insta ll inside a veh icle. z This ma y cause m alfunction, an electric shoc k or fire. z Especia lly avoid ope rating the mo nitor near water or outdoors w here it could b e exposed to s now or rain. If the monito r is dropped or th e casing is damage d, turn the monitor[...]

Do not in sert metal objects such as chop sticks, wire and gim let or inflammabl e objects such as paper and ma tch into the vent, headphone port or AV ports. z It ma y cause a fire or an electri c shock. If an alien sub stances or water flows into the product , turn the prod uct off, unpl ug the power c onnector from the wall outle t and conta ct [...]

z A falling product cou ld cause p hysical dam age even de ath. When not us ing the product for an extended time period, keep the product unplug ged. z Otherw ise, this may cause hea t emission fro m the accu mulated di rt or degraded insulation , leading to electric shock o r fire. Do not pl ace children’s favorite objects (or anything else that[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ty[...]

Monitor & Slidin g Stand Manual Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front[...]

MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment dependi ng on the contents of the image you are watching. Curren tly six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie. Each[...]

AUTO button Use this button for auto adjustmen t. Power button [ ]/ Power indicator Use this button for turn the monitor on and off. / This ligh t glows blue during normal operatio n, and blinks blue once as the monitor saves your adjustments. See PowerSaver described in the manual for fu rth e r information rega rding power saving functions. For e[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Pivot stand Ty[...]

Monitor & Slidin g Stand Manual Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software Ma g icRotation software Cable D-sub Cable Power Cord Front[...]

MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment dependi ng on the contents of the image you are watching. Curren tly six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie. Each[...]

See PowerSaver described in the manual for fu rth e r information rega rding power saving functions. For energy conserva tion, turn your monit or OFF when it i s not needed, or w hen leaving it unattended for long p eriods. Rear Simple stand Pivot stand / Slid ing Stand (The configu ration at the back of the monitor may vary fro m product to produc[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Monitor & Pivot stand Manual Quick Setup Guide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™[...]

Front MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [] MagicBright™™ is a new feature providing optimum viewing environment dependi ng on the contents of the image you are watching. Curren tly six different modes a re available: Custom, Text, Internet, Game, Sport and Mov ie[...]

Enter button [ ] / Source button Activates a highlighted menu item. / Push the ' ', then selects the vi deo signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper le ft of the screen displaying the current mode -- a nalog or digital input signal.) Note : If you select the d[...]

Please make sure the followi ng ite ms are included with your monitor. If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Type 1 Monitor & Sim p le stand Bottom MagicRotation program can not be provi ded as Simple Stand does not suppor t Pivot function. Type 2 Monitor & Slidin g Stand[...]

Quick Setup Gu ide Warranty Card (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ soft ware Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable ( o p tion ) Front MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™™ [[...]

the pre-configured value s may not be comfortable to your eyes depending on your taste. If this is the case, adjust th e brightness and contrast by usi ng the OSD menu. 2) Text For documentations or works invol v in g heavy text. 3) Internet For working w ith a mixture of i mages such as text and graphics. 4) Game For watching motion pictures such [...]

Sim p le stand Slidin g Stand (The configu ration at the back of the monitor may vary fro m product to produc t.) POWER port Connect the power cord for your mon itor to the power p ort on the back of the monitor. DVI IN port Connect the DVI Cable to the DVI port on the ba ck of your monitor. RGB IN port Connect the signal cable to the 15-pin, D-sub[...]

Connecting the Monitor 1. Connec t the power co rd for your monit or to the power p ort on the bac k of the monit or. Plug the p ower cord for th e monitor in to a nearby outle t. 2-1. Using the D-sub (Analog) connect or on the vid eo card. Connec t the signal c able to the 1 5-pin, D-sub port on the ba ck of your monitor. [ RGB IN ] 2-2. Co nnecte[...]

Monitor Ass embl y Monitor and Bottom Swivel stand Pivot Stand / Slidin g Stand[...]

A . Stand Stopper Attachi ng a Base T his monito r accepts a 75 mm x 75 m m VESA-compliant mounting interfa ce pad. Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interfa ce pad (Sold separately) 1. Turn off y our monitor and u nplug its p ower cord. 2. Lay the LC D monitor fac e-down on a f lat surface with a cushi on beneath i t to[...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Using the DVI (Digital) [...]

Using the Stand Monitor Assembl y Monitor and Bo ttom Pivot Stand / Slidin g Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interface pad (Sold sep arately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mountin g interfa[...]

Connecting the Monitor 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analo g) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Connected to a Macintosh[...]

Monitor Assembl y Monitor and Bo ttom Pivot Stand / Slidin g Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

Simple stand Pivot stand Sliding Stand A. Monitor B. Mounting interface pad (Sold sep arately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace with a cushion be neath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mountin g interfa[...]

Connecting the Monitor 1. Connect the power cord for your mon itor to the power p ort on the back of the m onitor. Plug the power cord fo r the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) conne cto r on the video card. Connect the 'DVI-A to D-SUB' Cable to the RGB IN port on the back of your moni tor. [ RGB IN ] 2-2. Using[...]

Using the Stand Pivot Stand A . Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interfac e pa d (Sol d sep arately) 1. Turn off your monitor and un plug its power cord. 2. Lay the LCD monitor face -down on a flat surf ace wi th a cushion beneath it to protect the scre[...]

Installin g the Monitor Driver ( Automatic ) When prompte d by the operating sys tem fo r the monitor driver, in sert the CD-ROM included with this moni tor. Driver installation is sligh t ly different from one operating system to ano ther. Follow the directions appropriate fo r the operating syste m you have. Prepare a blank disk and down loa d th[...]

Then click "OK" button. 5. Moni tor driver installatio n is comple ted. This monitor driver is under certifying MS logo,a nd thi s installation don't damage your system.The certified dr iver will be posted on Samsung Monitor momepage http://www.samsung.com/ . Installing th e Monito r Driver (Manual) Windows XP | Windows 200 0 | Windo[...]

4. Click the " Properties " button on the " Moni tor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Hav[...]

8. If you can see follo win g " Message " window, then click the " Continue Anyway " button. Then click " OK " button. This monitor d river is under certi fied MS logo,and this installation does n't damage your system.The certified driver will be po sted on Samsung Monitor homepage. http://www.samsung.com/ 9. Clic[...]

1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Displa y " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4. Choose " Monitor ". 5. Click " Driver " and then click on " Update Driver.. " then click on the "[...]

Natural Color Natural Colo r One of the recent problems in usi ng a computer is that the color of the images printed out by a printer or other images scanne d by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by [...]

1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted automat[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness according to perso nal preferenc[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the scree n after applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , No rmal, Warm and Custom. ( Not available in MagicC olor mode of Full and In telligent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olor mode of Full a[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of eight lang uages. Note :The language chose n affects only the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position where the OSD menu appears on your monitor.[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description[...]

Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted automat[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness according to perso nal preferenc[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the scree n after applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , No rmal, Warm and Custom. ( Not available in MagicC olor mode of Full and In telligent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olor mode of Full a[...]

V-Position display. (Available in ana log mode only) OSD H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the OSD menu appears on your mo nitor. Transparen cy Change the transparency of the backgro und of the OSD. Display Time The menu will be autom[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description[...]

Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted automat[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. Picture Brightness Contrast Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Play/Stop Brightness You can use the on-screen menu s to change the brightness according to perso nal preference. Direct Acce ss Feature : When OSD i s not on the s creen, push the button to adj ust brightness. Contrast You can use the on-screen me nus to change the contrast according to personal pre ference. ( Not available in Mag[...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the scree n after applying[...]

Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning , repeat it after adjusting the frequency (clock speed). (Available in ana log mode only) Sharpness Change s the clearance of imag e. ( Not available in MagicColo r mode of Full and Intelligent. ) H-Position Changes the horizontal position of the monitor&apo[...]

H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor. V-Position You can change the vertical po sition where the OSD menu appears on your mo nitor. Transparen cy Change the transparency of the backgro und of the OSD. Display Time The menu will be automati cally turned off if no adjustments are made for a cer[...]

Menu Description Play/Stop Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. [ ]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [ AUTO ]Press to self-adjust to the incomin g PC signal. The values of fine,coarse and position are adjusted automat[...]

Menu Description AUTO When the ' AUTO ' button is pressed, the Au to Adjustment scree n appears as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adj ust to the inc oming video signal. The values of fine, coarse an d position are adjusted automati cally. (Available in ana log mode only) To make the[...]

Menu Description Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). You can also adjust the brightn ess and contrast of the monitor with the OSD adjustme nt locking feature. MagicBright™ Menu Description MagicBright™ Push th e MagicBright button to circle through available pre configured mod[...]

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCE Selects the video signal while the OSD is off. Picture Brightness Contrast[...]

Color MagicColor Color Tone Col or Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transparency Display Time Setup Auto Source Image Reset Color Reset Priority Information Picture Menu Description Play/Stop Brightness You can use the on-screen me nus to change the brightness according to perso nal [...]

Menu Description Play/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively developed to impro ve digital image and to display natural color more clearly with out disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor appears on the right and the scree n after applying[...]

: This function is to adjust the vertical size of the MagicZone. Color Tone The tone of the color can be changed and one of four modes can be selected - Cool , No rmal, Warm and Custom. ( Not available in MagicC olor mode of Full and In telligent. ) Color Control Adjusts individual R, G,B color balance. ( Not available in MagicC olor mode of Full a[...]

V-Position display. (Available in ana log mode only) OSD Menu Description Play/Stop Languag e You can choose one of eight langua ges. Note :The language chosen affects on ly the language of the OSD. It has no effect on any software running on the computer. H-Position You can change the horizontal position wh ere the OSD menu appears on your monitor[...]

Menu Description Play/Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Priority This is a source-switch function according to the priority that the user [...]

Menu Description Information Show s a video source, displa y mode on the OSD screen.[...]

1. [ ]Use this button to ope n the on-screen menu and exit from the men u scree n or close screen adjustment menu. 2. [ ]This button allow s you to adj ust items in the menu. 3. [ ]Press this butto n to act ivate a hig hlig h ted menu item . 4. [ AUTO ]Press to self-a djust to the in coming PC signal. The values of fine, coarse and positio n are ad[...]

Menu Descripti on AUTO When the ' AUTO ' butto n is pressed, the Au to Adjustment screen appe ars as shown in the animated scree n on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coa r se an d position are adjusted automati cally. (Available in ana log mode only) To make t[...]

Menu Descripti on Locked After pushing the "MENU" bu tto n more t han 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness an d contrast of the monitor with the OSD adjustme nt locki ng feature. MagicBrigh t™ Menu Descripti on MagicBright™ Push th e Mag icBri gh t bu tto n to circle thro ug h ava ila bl e p[...]

Menu Descripti on Brightness When OSD is not on the screen, push the button to ad jus t brightness. Picture Brightness Contrast Color MagicColor Color Tone Co l or Co nt rol Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Positi on Transparency Display Time Setup Image Reset Color Reset Information Picture[...]

Menu Description Pl ay/Stop Brightness You can use the on-screen me nu s to change the brightness according to perso na l preference. Direct Acce ss Feature : When OSD is not on the screen, push the button to adjust brig htness. Contrast You can use the on-screen me nus to change the contrast according to personal pre ference. ( Not available in Ma[...]

Menu Description Pl ay/Stop MagicColor MagicColor is a new techno logy that Samsung has exclusively develope d to improve digital image a nd to display natural color more clearly without disturbing ima ge quality. 1) Off - Returns to th e original mode. 2) Demo - The screen b efore applying MagicC olor appears on the right and the scree n a fter ap[...]

Menu Description Pl ay/Stop Coarse Removes noise such as ve rtical stripes. Coarse adjustment may move the screen image area . You may relocate it to the cente r usin g the horizontal control menu. (Available in ana log mode only) Fine Removes noise such as horizo ntal stripes. If the noise persists even after fine tuning , rep eat it after adjusti[...]

H-Position You can change the horizontal position where the OSD menu appears on your monit or. V-Position You can change the vertical positio n where the OSD menu appears on you r monitor. Transparen cy Change the transparency of the backgroun d of th e OSD. Display Time The menu will be automatical ly turned off if no adjustments are made for a ce[...]

Menu Description Pl ay/Stop Image Reset Image parameters are replaced with the factory default values. Color Reset Color pa rameters are replaced with the factory default values. Information Menu Descripti on Informatio n Shows a video source, display mode on the OSD screen.[...]

Overview | Installation | OSD Mode | Color Calibration | Uni nstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighti ng conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, [...]

Overview | Installation | OSD Mode | Color Calibration | Uninstal l | Troubleshooting Installation 1. Insert the installation CD into the C D-ROM drive. 2. Cl ic k th e Ma g ic T un e ™ installa t io n fi l e. 3. Select installation Language, Click "Next". 4. When the Installation Shield Wiza rd windo w appears, click "Next." [...]

6. Choose a folder to install the MagicTune™ program. 7. Click "Ins tall." 8. The "Installation Status" window appears.[...]

9. Click "Finish." 10. W hen the in stallati on is compl ete, the MagicTun e ™ executable icon appears on your desktop. Double-click the icon to start the program. Installation Problems The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting&q[...]

OS z Windows™ 98 SE z Windows™ Me z Windows™ 2000 z Windows™ XP Home Edition z Windows™ XP Professional Hardware z 32MB Memory above z 25MB Hard disk space above * For more information, visit the MagicTune™ website . It is recommended using MagicTune™ in Windo ws™ 2000 or later .[...]

Overview | Installation | OSD Mode | Color Calibration | Un install | Troubleshoot ing OSD Mode The OSD mode makes the adjustment of se ttings on all monitors easy. When sele cted , e ach tab on top of the control window displays t he general de scriptio ns of the sub-menu items for adjustment. When selected, each tab displays a list of menus. For [...]

Color Tab Definition Adjusts the "warmth" of the m onitor background or image color. Resolution Lists all display resolutions supported by the program. MagicBright™ MagicBright™ is a new feature pr oviding the optimum viewing enviro nment depending on the contents of the ima g e you are watchin g . Currently four different modes are a[...]

Image Tab Definition Adjusts the Fine , Coarse and Position values. MagicColor images by enhancing the brightness, sharpness, saturation, Hu e of a certain area on the screen . This offe rs an easy- to-use in terface that high lights the video-playing portion of your multimedia program by automatically de tecting and highlight the desired area by d[...]

Option Tab De finition You can configure MagicTune™ using the foll owing options. Support Tab Definition Shows the Asset ID and the version nu mber of the pr ogram, and allows you to use the Help feature. Sharpness Changes the clearance of image. Preferences Loads the Preferen ces Dialo g Box. Preferences in use will ha ve an "V" in the[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshoot ing Color Calibration 1. Color Calibration Color Calibration guides you to get opti mal color condition for your monit or. Proceed follow ing 5step s for ge tting op timal mon itor col or condi tion . 1. Control "Brightness control bar" for matching the brig[...]

2. Press "View Uncalibrated" button to see the original image.[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Uninstall The MagicTune™ program can be removed only by us ing the "Add or Remove Programs " option of the Windows™ Control Panel. Perform the following steps remove MagicTune™. 1. Go to [Ta sk Tray] ' [Start] ' [Settings] and select [Cont[...]

Overview | Installation | OS D Mode | Color Calibration | Uninstall | Tro ubleshoot ing Troubleshooting The current compu ting system is not co mpatible with Magic Tune™. Please press OK a nd click on the "Shortcut to the MagicTune™ site " to view our home page for further ref erence. An error ma y o ccur when your video/graphic card [...]

Visit the v ideo card maker' s homepage and downl oad and instal l the latest dr iver. For more i nformation abou t the video ca rd, contact t he card manufac turer. To ensure nor m al op e ra t ion , pl ea se restart your sy st em . An error occurs when the system is not restarte d after installing MagicTune™. (This is for W in98SE and W in[...]

z Visit the M agicTune™ website for technical support for MagicTun e™, F AQs (questions and answers) and software upgrades. z Visit the M agicTune™ website and download the installation software for MagicTune™ MAC. the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/Magi cTu[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Overview What is MagicRotation? Traditionally, computer displays allowed th e user to view only in landscape mode. In today's information ag e, more users need to view documents, web p ages, emails, etc. in there day to day life. These types of applications can be better viewed [...]

Overview | Installation | Interface | Uninstall | Troubleshoo ting Installation 1. Ins ert the installation CD into the CD-ROM drive. 2. Click the MagicRotatio n installatio n file. 3. Select installation Langu age, Click "Next". 4. When the InstallShield Wizard window appears, click "Next." 5. Select "I accept th e terms o[...]

6. Cho ose a folder to insta ll the MagicRotation program . 7. Click "Install." 8. The "Setup Sta tus" window appears.[...]

9. Click "Finish." Have to reboot the system in order for the MagicRotation to work properly. 10. When the installation is complete, the Magi cRotation executable icon appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as video card, motherboard and the network environment.[...]

movie files properly in 90, 180 and 270 orientations th en do the following : { Close the application. { Select the Or ientation (90, 180, 270) you want to view the application. { Relaunch the application. In most cases t his should fix the problem. 3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientati[...]

Overview | Installation | Interfa ce | Uninstall | Troubleshooting z When Rotation is functio ning, portion of MagicTu ne™ program may not operate normally. z AutoRotation : The screens display wil l automatically rotate when the monitor is rotated. To execute Aut o Rotation, it s hould be done as below. z Please install both MagicRotation an d M[...]

Rotate to 90 : Display will be rotated 90 degrees from the current angle. Rotate to 180 : Display will be rotated 180 degrees from the current angle.[...]

Rotate to 270 : Display will be rotated 270 degrees from the current angle. Hot key : Hot Keys are available by defa ult and can be changed by user. It can be assigned by user direct ly wi th keyboard after changing the existin g HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. In case only general key[...]

[...]

Overview | Installation | Interface | Uninstall | Troubleshoo ting Uninstall The MagicRotation program can be removed only by using the "Add/Remove Programs" option of the Windows Control Panel. Perform the following steps to remove Magi cRotation. 1. Go to [Ta sk Tray] ' [Start] ' [Settings] and select [Control Panel] in the me[...]

Overview | Installation | Interface | Uninstall | Troubleshoot ing Troubleshooting Before You Call Technical Support z MagicRotation Software works with the installed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotati on capabilities. If the installed "Display Driver" is working incorrectly or has bug[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Mode","Recommend ed mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and the n disappears. Please change to the recommended mode during this one-mi nute period .[...]

resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ˧ Display ˧ Settings . Has the video card been set properly? Set the video card by [...]

Q & A Question Answ er How can I chan ge the frequency? Frequency can be changed by reconfiguring the vid eo card. Note that video card support ca n vary, depending on the version of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? W indows ME/XP/2000 : Set the resolution at the Co[...]

Environment The location and the position of the monitor may influenc e the quality and other features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to anothe r room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the moni[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

disappears. Please change to the recommended mode during this one-mi nute period . (The message is displaye d again if the system is rebooted.) There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerS aver mode. press a key on the keyboard to activate the monitor and restore the[...]

Control Panel -> Performance an d Maintenance -> Syste m -> Hardware -> Device Manager -> Monitors -> After dele ting Plug and Play monitor, find 'Plug and Play monitor' by searching ne w Hardware. MagicTune™ is an a dditional software for the monitor . Some graphic cards may no t support your monitor. When you have a [...]

Self-Test F eature Check Self-Test Feature Check | Warning Messages | Environment | Useful Tips Y our monitor provides a self test feature that allows you to ch eck whether your monitor is functioni ng properly . Self-Test Feat ure Check 1. Turn off both your comp uter and the monitor. 2. Unplug the video cable f rom the back of the computer. 3. Tu[...]

1024 60 Hz" message comes up, di sconnect the cable from the computer while the monitor is still powered on. { If there is a message coming up on the screen or if th e screen goes white, this means the monitor is in working con dition. { In this case, check the computer for trouble.[...]

Check List Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If yo u do need assistance, please call the phone nu mber on the Information section or con tact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected p[...]

Hz, a "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properl y but the "Not Optimum Mode","Recommended Mode 1280 x 1024 60 Hz" message appears for one minute and the n disappears. Please change to the recommended mode during th[...]

(The maximum frequency per resolution may differ from product to product.) There are only 16 colors shown on the screen. The screen colors have changed after changing the v ideo card. Have the Windows colors been set properly? Windows ME/2000/XP: Set the colors properly at the Control Panel ˧ Display ˧ Settings . Has the video card been set prope[...]

Q & A Question Answ er How can I chan ge the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support ca n vary, depending on the version of the driver used. (Refer to the computer or the video card manual for de tails.) How can I adjust the resolution? W indows ME/XP/2000 : Set the resolution at the Con[...]

Environment The location and the position of the monitor may influe nce the quality and othe r features of the monitor. 1. if there are any sub woo fer speakers near the monitor, unplug and relocate the woofer to anothe r room. 2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the mon[...]

General General Model Name SyncMaster 740B LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270. 336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch [...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

frequency of this repet ition is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940B LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16 .6 inch (with Basic Stand) / 4.85 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16 .1 inch (with Basic Stand) / 5.55 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

frequency of this repet ition is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 740N LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch [...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

frequency of this repet ition is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Fn LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolu[...]

Less than 40 W Dimensions (WxDxH)/ Weight 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmen tal consideratio ns Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, n on-condensing Storage Temperatu[...]

Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 48 0 35.000 66.667 30.240 -/- MAC, 832 x 62 4 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100 .00 -/- VE[...]

General General Model Name SyncMaster 540B LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 10[...]

Less than 25 W Dimensions (WxDxH)/ Weight ( Simple Stand) 337.5 x 180.0 x 336.8 mm / 13.3 x 7.1 x 13 .3 inch (with Basic Stand) / 2.75 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 337.5 x 180.0 x 333.8mm / 13.3 x 7.1 x 13 .1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Envi[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

General General Model Name SyncMaster 540N LCD Panel Size 15 " Diagonal (38 cm) Display area 304.1 mm (H) x 228.1 mm (V) Pixel Pitch 0.297 mm (H) x 0.297 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1024 x 768@60 Hz Maximum resolution 10[...]

Less than 25 W Dimensions (WxDxH)/ Weight ( Simple Stand) 337.5 x 180.0 x 336.8 mm / 13.3 x 7.1 x 13 .3 inch (with Basic Stand) / 2.75 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 337.5 x 180.0 x 333.8mm / 13.3 x 7.1 x 13 .1 inch (with Basic Stand) / 3.65 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Envi[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

General General Model Name SyncMaster 740T LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 27 0.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.2 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 34 W Dimensions (WxDxH)/ Weight ( Simple Stand) 362.1 X 200.0 X 389.6 m m / 14.4 x 7.9 x 15.3 inch (with Basic Stand) / 4.6 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 362.1 X 200.0 X 389.6 m m / 14.4 x 7.9 x 15.3 inch (with Basic Stand) / 4.5 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

General General Model Name SyncMaster 940T LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolut[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16 .0 inch (with Basic Stand) / 5.35 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

General General Model Name SyncMaster 940N LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resoluti[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16 .6 inch (with Basic Stand) / 4.85 kg Dimensions (WxDxH)/ Weight ( Pivot Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16 .1 inch (with Basic Stand) / 5.55 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

frequency of this repet it ion is ca lled Vertical Frequency or Refresh Rate. Unit: Hz[...]

General General Model Name SyncMaster 940Be LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 30 1.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@ 60 Hz Maximum resolu[...]

Less than 38 W Dimensions (WxDxH)/ Weight ( Simple Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16 .0 inch (with Basic Stand) / 5.35 kg Dimensions (WxDxH)/ Weig ht (Sliding Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Env[...]

Preset Timing Modes If the signal transferred from the computer is t he same as the following Preset Timing Modes, the screen will be adjusted automa ti cally. However, if the signal differs, the sc re en may go blank while the power LED is on. Re fe r to the video card manual and adjust the screen as follows. Table 1. Prese t Timing Modes Display [...]

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North Americ a CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com Latin America ARGENTIN[...]

CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Mi n) http://www.samsung.de HUNGARY 06 40 985 985 http://www.samsung.com/hu ITALIA 199 153 153 http://www.sa[...]

Terms Dot Pitch The image on a monitor is compose d of red, green and blue dots. Th e closer the dots, the higher the resolu tion. The distance between two dots o f the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several time s per second in order to create and display an image for the user[...]

4. If you are not satis fied with the qual ity of picture, you can get better quality of pictu re by executing "auto adjustment fun ction" in display screen that is ap peared as window termination b utton is pressed. If there's still noise after auto matic adjustment, use FINE/COA RSE adjustment function. 5. If you view a fixed scree[...]

PRODUCT INFORMATION (Image Retention Free) LCD Mon itors and TVs may have im age retention when switc hing from one i mage to ano ther especi ally after d isplaying a s tationary im age for a long ti me. This gui de is to de monstrate correc t usage of L CD products in order to protec t them from Ima ge rete nti on. Warrant y Warrant y does not cov[...]

Ex) The best w ay to protect you r monitor from Im age retention is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image ret ention may not occur wh en a LCD panel i s operated u nder normal conditions. Normal condition s are define d as contin uously chang ing video p atterns. When the LCD panel is o[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate col lection systems) This marking show n on the product or its literature, indicates that it sho uld not be disposed w ith other househ old wastes at the end of its working life. T[...]