Samsung 650MP-2 manuale d’uso

LCD Display User Manual The color and the appearance may differ depend- ing on the product, and the specifications are sub- ject to change without prior notice to improve the performance. SyncMaster 650MP-2, 650FP-2[...]

Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note P[...]

Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due[...]

Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature. When putting the product down, make sure[...]

Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using the DVI (Digital) connector [...]

When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it with a soft, dry cloth. • (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appear[...]

Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables. • Otherwise, it may fall and result [...]

Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/or damage the product. • If you use the product in a locati[...]

• The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery. Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater. • This may reduce the lifetime of the product, and may result in fir[...]

Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the groov[...]

LCD Display Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) User's Guide Cables Power Cord D-Sub Cable Others Remote Control (BP59-00138A) Batteries (AAA X 2) (Not available in all loca- tions) BNC to RCA Adaptor Jack Ferrite Core for Power Cord Sold separately DVI Cable Network Box Wall Mount KIT Introduction[...]

Sold separately RGB to BNC Cable BNC to BNC Cable Semi Stand KIT Ferrite Core • The ferrite cores are used to shield the cables from interfer- ence. • When connecting a cable, open the ferrite core and clip it around the cable near the plug. Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to [...]

Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [ PC ] → [ DVI ] → [ AV ] → [ Component ] → [ HDMI ] → [ MagicInfo ] → [ BNC ] Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. PIP button P[...]

POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (In- put)) • Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) • Connect the RGB IN port on the mon[...]

DVI/RGB/HDMI AUDIO IN (PC/DVI/ HDMI Audio Connection Terminal (Input)) AV/COMPONENT AUDIO IN [R-AUDIO- L] Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the LCD Display. DVI OUT • Connect a monitor to another monitor through a DVI cable. • Connect the [DVI OUT] port on the mon- itor to the [HDMI IN] port on [...]

BNC OUT [R, G, B, H, V] (BNC Terminal (Output)) BNC (Analog PC) Connection: connecting the R, G, B, H, V ports. The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 LCD Displays can be connected (May not be supported dependin[...]

POWER OFF Number Buttons DEL / GUIDE button - VOL + SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO COLOR BUTTONS TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo 1. POWER Turns the product On. 2. OFF Turns the product Off. 3. Number Buttons Press to change the channel. 4. DEL / GUIDE but- ton The "-" button is us[...]

- This function does not work for this LCD Display. 9. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 10. INFO Current picture information is displayed on the upper left corner of the screen. 11. COLOR BUTTONS Press to add or delete channels and to store channels to the fav[...]

19. RETURN Returns to the previous menu. 20. EXIT Exits from the menu screen. 21. MagicInfo MagicInfo Quick Launch Button. Note MagicInfo can only be enabled when a network box is con- nected. Mechanical Layout Mechanical Layout Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purcha[...]

Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • Th[...]

There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjus[...]

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed to [...]

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the[...]

Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Introduction[...]

Using the HDMI (digital) output on the graphics card. • Connect the [HDMI IN] port on the LCD Display to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted. Note t[...]

Connect the audio cable for your LCD Display to the audio port on the back of the LCD Display. Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Turn on the power switch. Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. [...]

Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display . 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder [...]

2. Select BNC for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control. Connecting Using a DVI Cable 1. Connect between the [DVI OUT] port on the LCD Display and the input port on another monitor using a DVI cable. 2. Connect between the [AUDIO OUT] port on the LCD Display and the audio input por[...]

Note In HDMI mode, only PCM format audio is supported. Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of a digital output device to the [HDMI IN] terminal of the LCD Display using a DVI to HDMI cable. 2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digi[...]

2. Connect a Component cable between the [BNC/COMPONENT IN [R/Y, G/P B , B/P R ]] port on the LCD Display and the P R , Y, P B jacks on the DVD player. Note • Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted[...]

Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on LCD Display. Connections[...]

MDC (Multiple Display Control) Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MDC installation file. Note If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MDC executable file on the CD. 3. When the Installation Shield Wizard window appears, clic[...]

Introduction A Multiple Display Control (MD C) is an application allowi ng various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communic ation, is used for the commu nication between a PC and a display. Therefore, a serial cable should be connected be tween the serial port on a PC and the serial port on a[...]

Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disabl e the remote co ntrol signal receiving function of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you ca n only operate power an[...]

1. The Multiple Dis play Control is originally set to CO M1. 2. If any port other than COM1 is used, COM1 th roug h COM4 can be selected i n the Port Sel ection Menu. 3. If the exact port name that is connected to the LCD Displa y using a serial cabl e is not selected, co mmunication will be unavailable. 4. The selec t ed p ort is st or ed in th e [...]

Info Grid shows some basic i nform ation necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a di splay to control.[...]

Power Control allows controlling some of the functions of the selected display. 1) Power On/Off - T urns the power of the selected display On/Off. 2) Volume - Controls the vo lume level of the selected display. It receives the volume value of the sele cted displa y from the sets and displays it in the slider. (When you cancel the selection or choos[...]

• PC Mode[...]

Info Grid shows some basic i nformation necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of th e se lec ted display to DV I. 4) TV -C h a n g es the Input Source of the selected dis play to TV. 5) DTV[...]

Info Grid shows some basic i nformati on necessary to Im age Size Control. 1) ( Power Status) - Shows the power status of the current display. 2) Image Size - Shows the current Image Size of the display in use. 3) Input - Info Grid displays only the displ ays whose Input Source is PC, BNC, D VI. 4) PC Source - When you click Image Size, the PC Sour[...]

Info Grid shows some basic i nformati on necessary to Im age Size Control. 1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Compon ent, DVI(HDCP), HDMI, DTV. Click Select All or us e Chec k Box to select a display to control . 2) Info Grid displays only the display having TV, AV , S-Video, Component or DVI(HDCP ) as input sou[...]

Info Grid shows some basic i nform ation necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minute, AM/PM of On Time Setup, Status , Source, Volume of the sele cted display. 3) Off Time Setup - Set the Hour, Mi[...]

Info Grid shows some basic i nformati on necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected di splay. 3) Large - Turns on the PIP of the selected display and changes the size to Large. 4) Small - Turns on the PIP of the sele cted di splay and changes the size to [...]

1. Click PIP of the main icon s an d the PIP control screen appears. Info Grid shows s ome basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled w ith turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected[...]

Picture 1. Click Settings of the main icons an d the Settings Control screen appears. Info Grid shows some basic i nformati on necessary to Settings Control. When each function is selected, the set value of the sel ected function i s disp layed in t he slide.When s elected, each function fetches the value for the set an d displays it on th e slide [...]

-A d j usts the Bri g htness Sensor for the selected display. 10) Dynamic Contrast -A d j usts the Dynamic Contrast for the selected display. The Input source of MagicInfo wo rks only on MagicInfo model. Color Temp is only enabled if the Color Tone is set to Off. The Input source of TV works only on TV model. This feature is available only for th e[...]

4) Red -A d j usts red Color of the selected display. - Available only for NT. 5) Green -A d j usts g reen Color of the selected display. - Available only for NT. 6) Blue -A d j usts blue Color of the selected display. - Available only for NT. 7) Color Tone -A d j usts the Color Tone for the selected display. 8) Color Temp -A d j usts the Color Tem[...]

Info Grid shows some basic i nformation necessary to Settings Contro l. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Chan g in g a va[...]

Image Lock 1. Click Settings of the main icons an d the Settings Control screen appears. Info Grid shows some basic i nformati on necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selecte[...]

An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenanc e Control f unction for all input sources. 2) Auto Lamp Control - Automatically adjusts the backlight of th e selected display at a specified time. T he Manual Lamp Control automatically turns o ff if you ad j ust usin g the Auto Lamp Control. [...]

1) Scroll - This function is used to remove the afterimages that oc cur when a still screen is displayed on the selected display for a long time. 2) Pixel Shift - This allows the screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurrin g when a still screen [...]

1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. 1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) - The screen can be d[...]

You may not operate this function in MagicInfo. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to c ontrol does not appear on the Power Control Info Gr id - Check the connection of RS232C. (Check if it is properl[...]

2. Selected one display: Fetches and displays the settings value for the select ed display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select All: Returns to the Factory Default Value.[...]

Adjusting the LCD Display Input Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Source List MENU → ENTER → → ENTER → A network box is not connected A network box is co[...]

PIP Note Available Modes: PIP ON Note The PIP function is not available when Video Wall is On . When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. ( Off / On ) MENU → ENTER → → → ENTER → Note • More than[...]

• PC : DVI / AV / Component / HDMI • BNC : DVI / AV / HDMI • DVI / AV : PC / BNC • Component : PC • HDMI : PC / BNC Swap MENU → ENTER → → → ENTER → → → → ENTER → Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP windo[...]

Changes the Position of the PIP window. Transparency MENU → ENTER → → → ENTER → → → → → → → ENTER → → , → ENTER Adjusts the Transparency of PIP windows. • High • Medium • Low • Opaque Note • PIP turns off when the LCD Display is switched to an external source. • For PC and DVI , this is deactivated if the cab[...]

are common signals for AV and PC , make sure to set the Edit Name in accordance with the input signal. • The Picture menu changes depending on the input signal and Edit Name . Picture [ PC / DVI / BNC / MagicInfo Mode] Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a netw[...]

For documents or works involving heavy text. 4. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Note Not available when Dynamic Contrast is set to On . Custom By usin[...]

Color Tone MENU → → ENTER → → → → ENTER → → , → ENTER The color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note • Not available when Dynamic Contrast is set to On . • If you set the Color Tone to Cool , Normal , Warm , or Custom , the Color Temp. function is disabled. • If you set the Color Tone to Off [...]

MENU → → ENTER → → → → → ENTER → → → ENTER → → , → ENTER 3. Blue MENU → → ENTER → → → → → ENTER → → → → ENTER → → , → ENTER Color Temp. MENU → → ENTER → → → → → → ENTER → → , → ENTER Color Temp. is a measure of the 'warmth' of the image colors. Note • Not availa[...]

→ , → ENTER Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). Position MENU → → ENTER → → → → → → → ENTER → → → → ENTER → → , , , → ENTER Adjusts the screen location horizontally and vertically. Auto Adjustment MENU → ?[...]

→ , → ENTER Selects either On or Off with the signal control. Signal Control MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → 1. R-Gain MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → ENTER → → , → ENTER 2. G-Gain MENU → → ENTER → → → → → → → → ?[...]

MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → → → → → ENTER → → , → ENTER 6. B-Offset MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → → → → → → ENTER → → , → ENTER Size MENU → → ENTER → → → → → → → → → → ENTER → ?[...]

1. Normal 2. Low Note • For Timing which can be used for both the PC and the DTV in DVI , HDMI mode, HDMI Black Level will be activated. PIP Picture MENU → → ENTER → → → → → → → → → → → ENTER → → , → ENTER Adjusts the PIP Screen Settings. Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → → ?[...]

→ , → ENTER Adjusts the Color of the PIP window on the screen. Note Enabled only when the PIP input is selected in AV , HDMI or Component mode . 5. Tint MENU → → ENTER → → → → → → → → → → → ENTER → → → → → → ENTER → → , → ENTER Adds a natural tone to the PIP window. Note Enabled only when the PIP inpu[...]

→ , → ENTER Adjusts the inverter lamp in order to reduce energy consumption. Note This function does not operate when Dynamic Contrast is set to On in PC , DVI , AV , HDMI , Component or MagicInfo modes. ( MagicInfo can only be enabled when a network box is connected. Brightness Sensor MENU → → ENTER → → → → → → → → → → [...]

→ , → ENTER The LCD Display has four automatic picture settings (" Dynamic ", " Standard ", " Movie " and " Custom ") that are preset at the factory. Dynamic , Standard , Movie , or Custom can be activated. 1. Dynamic 2. Standard 3. Movie 4. Custom Note Not available when Dynamic Contrast is set to On . C[...]

Sharpness MENU → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Adjusts the picture Sharpness. Color MENU → → ENTER → → → ENTER → → → → → ENTER → → , → ENTER Adjusts the picture Color. Tint MENU → → ENTER → → → ENTER → → → → → → ENTER → → , → ENTER Adds a natural tone to[...]

3. Cool1 4. Normal 5. Warm1 6. Warm2 Note • Not available when Dynamic Contrast is set to On . • If you set the Color Tone to Cool2 , Cool1 , Normal , Warm1 , or Warm2 , the Color Temp. function is disabled. Color Temp. MENU → → ENTER → → → → → ENTER → → , → ENTER Color temp. is a measure of the 'warmth' of the ima[...]

Note • Not available when Dynamic Contrast is set to On . • Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. • Zoom 1 , Zoom 2 are unavailable in HDMI mode. • The Position and Reset functions are available in Zoom 1 or Zoom 2 modes. Digital NR (Digital Noise Re[...]

1. Normal 2. Low Note For Timing which can be used for both the PC and the DTV in DVI , HDMI mode, HDMI Black Level will be activated. Film Mode MENU → → ENTER → → → → → → → → → ENTER → → , → ENTER The Film Mode feature offers you a theater-quality viewing experience. In HDMI mode, this function is available when the inp[...]

MENU → → ENTER → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Adjusts the Brightness of the PIP window on the screen. 3. Sharpness MENU → → ENTER → → → → → → → → → → ENTER → → → → ENTER → → , → ENTER Adjusts the Sharpness of the PIP window on the screen. Dynamic Contrast[...]

Note This function does not operate when Dynamic Contrast is set to On in PC , DVI , AV , HDMI , Component or MagicInfo modes. ( MagicInfo can only be enabled when a network box is connected. Brightness Sensor MENU → → ENTER → → → → → → → → → → → → → ENTER → → , → ENTER Brightness Sensor automatically detects dis[...]

→ , → ENTER The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialog (i.e., news). 5. Custom Selects [...]

→ , → ENTER Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume MENU → → → ENTER → → → → ENTER → → , → ENTER Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT MENU → → → ENTER → → → → → ENTER → → , → ENTER SRS TS XT is a patented S[...]

→ , → ENTER Selects either Main or Sub when PIP is On . Note Available Modes: PIP ON 1. Main 2. Sub Speaker Select MENU → → → ENTER → → → → → → → ENTER → → , → ENTER When you use the product with it connecting to a Home theater, turn the Internal speakers off so you can listen to sound from the Home theater's (ext[...]

• HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Language MENU → → → → ENTER → → ENTER → → , → ENTER You can choose one of 13 languages. Note The language chosen affects only the language of the OSD. It has no effe[...]

Sleep Timer MENU → → → → ENTER → → → ENTER → → → ENTER → → , → ENTER Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7. 180 On Timer MENU → → → → ENTER → → → ENTER → → → → ENTER → → , / , → ENTER Turns the LCD Display on automatically at a preset [...]

→ , / , → ENTER Turns the LCD Display off automatically at a preset time. Menu Transparency MENU → → → → ENTER → → → → ENTER → → , → ENTER Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN MENU → → → → ENTER → → → → → ENTER → → EN- TER → [...]

Note The preset password for the LCD Display is "0000". Lock MENU → → → → ENTER → → → → → ENTER → → → ENTER → → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings. Energy Saving MENU ?[...]

→ , → ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU → → → → ENTER → → → → → → → → ENTER → → → ENTER → → , → ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image wi[...]

Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU → → → → ENTER → → → → → → → → ENTER → → → → → ENTER → → , → ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU [...]

Pixel Shift Pixel Shift MENU → → → → ENTER → → → → → → → → → ENTER → → ENTER → → ENTER → → , → ENTER To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical direction. 1. Off 2. On Horizontal MENU → → → → ENTER → → → → → ?[...]

Time MENU → → → → ENTER → → → → → → → → → ENTER → → ENTER → → → → → ENTER → → , → ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → ENTER → → , → E[...]

2. Bar 3. Eraser Period MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Use this function to set the execution period for each mode set in the timer. Time MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → → → → ENTER ?[...]

Bar MENU → → → → ENTER → → → → → → → → → ENTER → → → → → ENTER → This function prevents after-images on the screen by moving long black and white vertical lines. Eraser MENU → → → → ENTER → → → → → → → → → ENTER → → → → → → ENTER → This function prevents after-images on t[...]

→ , → ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in [...]

OSD Rotation MENU → → → → ENTER → → → → → → → → → → → → → → → ENTER → → , → ENTER OSD Rotate 1. Landscape 2. Portrait Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. MENU → → → → ENTER → → → → → → → → → →[...]

→ , → ENTER Multi Control Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Multi Control Assigns an individual ID to the SET. MENU → → → → → ENTER → → ENTER ?[...]

MagicInfo Available Modes • PC / DVI / BNC • AV • Component • HDMI • MagicInfo Note • MagicInfo can only be enabled when a network box is connected. • The HDMI port and network box cannot be connected at the same time. Note • The remote control can be used to select MagicInfo . However, it is recommended to use a separate USB keyboa[...]

• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • To save Setup contents that have been changed when EWF is in the Enable state, you must Commit them. • By selecting Disable , Enable or Commit , the system is restarted. MagicInfo 1. Select Application - step 1[...]

3. Select Language - step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information Adjusting the LCD Display[...]

Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear. Adjusting the LCD Display[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

• Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) • The user is responsible for any damage caused by using these substances. Symptoms and Rec[...]

A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and th[...]

Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The Power Indicator blinks. A: The LCD Display [...]

A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on th[...]

Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer. Troubleshooting[...]

Specifications General General Model Name SyncMaster 650MP-2, 650FP-2 LCD Panel Size 65 " Diagonal (163 cm) Display area 1428.48 mm (H) x 803.52 mm (V) Pixel Pitch 0.744 mm (H) x 0.744 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M Resolution Optimum resolu- tion 1920 x 1080 @ 60 Hz (RB) Maximum resolu- [...]

Dimensions (W x H x D) / Weight 1554.0 x 1029.0 x 500.0 mm / 61.2 x 40.5 x 19.7 inch (With Stand) / 69.0 Kg / 152.1 lbs VESA Mounting Interface 800 x 400 mm Environmental considerations Operating Temperature : 32°F ~ 104°F (0°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ [...]

PowerSaver State Normal Opera- tion Power saving mode Power off ( Button) Power off ( Switch) Power Indicator On Blinking Off Off Power Con- sumption 430 watts Less than 2 watts 1 watts 0 watts Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically.[...]

Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor- izontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second t[...]

Information For a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD. • Resolution: 1920 x 1080 • Vertical frequency (refresh rate): 6[...]

Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color [...]

• Avoid using a combination of characters and background color with large dif- ference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Change the characters color periodically • Use Bright colors with little difference in luminance. - Cycle :[...]

• Apply the Screen Bar function - Symptom: Horizontal / Vertical Bar with Black Color move up and down. Apply the Screen Erasing function on Product • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display Information[...]

Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com MEXICO 01-800-SAMSUNG http://www.samsung.com (726-7864) Latin America [...]

Appendix Europe CROATIA 062 SAMSUNG (062 726 http://www.samsung.com 7864) CZECH 800 - SAMSUNG http://www.samsung.com (800-726786) DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG http://www.samsung.com (726-7864, € 0,14/Min) GREECE 2106293[...]

Appendix CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 - ARMENIA 0-800-05-555 - AZERBAIJAN 088-55-55-555 - KAZAKHSTAN 8-10-800-500-55-500 (GSM: http://www.samsung.com 7799) UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.sa[...]

Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The dis- tance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. T[...]

Example: If the resolution is 1920 x 1080, this means the screen is composed of 1920 horizontal dots (horizontal res- olution) and 1080 vertical lines (vertical resolution). Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Eu- rope only ( Applicable in the European Union and other European countries [...]

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation[...]