Samsung 957FS manuale d’uso

[...]

User’s Manual 2 Index Main Page On-Screen Displa y Gene ral High ligh t Zone MouScreen ™ S/W Safety Instructions T r oubleshooting Natational Check List Power Q & A Installation Self-T est Feat ure Check Cleani ng Other Intr oduction Specifications Unpackin g Gener al Speci fications Fr ont Pr eset Display Modes Rear PowerSaver Bot tom Setu[...]

User’s Manual 3 Safety Instructions Failur e to foll ow directi ons noted by this sy mbol could result i n bodily harm or damage t o equip- ment. Notational W arning/Caution Notation Conventions Prohibited Important to read and understan d at all times Do not disas semble Disconnect the plug from the outlet Do not touch Grounding to prev ent an e[...]

User’s Manual 4 Safety Instructions When not used for extende d periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. If the size o f your monitor is small, or if the same i mage is pres ent for long periods of ti me, you may see after images due to damage to the f lourescent substance on t he inside of [...]

User’s Manual 5 Safety Instructions • Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. • Failure to do s o may cause an electr ic shock or fire. • Do not connect too many extension cords or plugs to an outlet. • This may cause a fire. Power[...]

User’s Manual 6 Safety Instructions • Do not cover th e vents on the mon itor cabine t. • Bad ventilation may cause a breakdown or fire. • Put your monitor in a location with low humid ity and a mini- mum of dust. • An electric shock or fire could result inside the monitor. • Do not drop the monitor when moving it. • This may cau se d[...]

User’s Manual 7 Safety Instructions • Do not place the monitor f ace down . • The CDT su rface may be damag ed. • Do not use the monitor with out the monitor stand. • It could break down or cause a f ire due to ba d ventilation . • If the monitor must be used with o ut the supplied stand , take st eps to insure proper ventilation. Insta[...]

User’s Manual 8 Safety Instructions • Do not spray det ergent directly on the moni tor. • Use the recommended detergent with a smooth cloth. • You can prevent the co ated CDT from being damage d or the monitor cabinet from bei ng dissolve d, cracked or d iscolored . • You can buy a recommended detergen t at any Samsung Serv ice Center. ?[...]

User’s Manual 9 Safety Instructions • Do not remove cover(or back ). No use r serviceable parts insid e. • This may cause an electric shock or a fire. • Refer serv icing to qualified s ervice personn el. • If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immedi[...]

User’s Manual 10 Safety Instructions • Do not try to move the moni tor by pu lling on the wire or the si g- nal c able. • This may cause a breakdown, electric shock or a fire due to damage to the cable. • Do not move th e monit or right or le ft by pu lling only the wir e or the signal cable. • This may cause a breakdown, electric shock o[...]

User’s Manual 11 Introduction • Monitor and St and Unparking (Some models include a stan d attac hed. ) Please make sure the followi ng it ems are included with your monitor . If any i tems are mi ssing, con tact your dealer . • Power Cord • Stand • S i gnal Cab l e (Option) • Quick Setup Gui de • Warra nty Card (Not available in all [...]

User’s Manual 12 Introduction 1. Highlight but ton The Highlig ht Zone e nsures cl ear images on TVs, vi deo conf erencin g systems or photos by emph asizing a certain area on the scr een. 2. Exit button Use this b utto n to E x it th e a ctiv e me nu or t he OS D. 3. Adjust but tons Thes e buttons allow you t o highligh t and ad just it ems in t[...]

User’s Manual 13 Introduction (The conf iguration a t the back of the monitor may vary from pr oduct to pro duct.) 1 . Power port Connect the po wer cord for your monitor to the power port on the back of the m onitor. 2 . Si gnal Ca ble Connect t he signal cab le to the vi deo port on your com puter, video board, vi deo card, or graphics card . 3[...]

User’s Manual 14 Introduction 1 . Signal Cabl e Connect the s ignal cabl e to the video port on y our comput er, video board, video card, or graphics card . 2 . Power Port Connect the po wer cord for your monitor to the power port on the back of the monitor. 3 . Tilt/Swivel B ase You can separ ate the base from the monitor. Bottom[...]

User’s Manual 15 Setup 1. Connect t he power cord for your monitor to th e power port on the back of th e monitor. Plug the power co rd for th e monitor i nto a n earby outl et. 2. Connect t he signal cable to the vi deo port on your co mputer, vide o board , video car d, or graph ics card. 3. If you are us ing a Macintosh computer, conne ct the [...]

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown h[...]

Windows XP/2000 1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Driver" . 3. Choose your monitor model in the model list, then click the "OK" button. 4. Click the " Install " button in the " Warning " window. 5. If you can see following "Message" window, then click the "Continue [...]

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown h[...]

5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7. Click the " Browse " button then choose A:(D:Driver) and choose your monitor model in t[...]

Thi s mon it or d r i ver i s un d er cer tif y i ng MS l ogo,an d thi s i ns t a ll a ti on d on 't d amage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/ . 9. Click the " Close " button then click " OK " button continually. 10. Monitor driver installation is com[...]

Microsoft ® Windows ® Millennium Operating System 1. Click " Start " , " Setting " , " Control Panel ". 2. Double click " Display " icon. 3. Select the " Settings " tab and click " Advanced Properties " button. 4. Select the " Monitor " tab. 5. Click the " Change " bu[...]

7 . C on ti nue c h oos i ng " Cl ose " b u tt on an d " OK " b u tt on un til you c l ose th e " Di sp l ay Properties " dialogue box. Microsoft ® Windows ® NT Operating System 1. Click Start , Settings , Control Panel , and then double-click Display icon. 2. In Display Registration Information window, click Setting[...]

User’s Manual 21 Setup With the built-in pedestal, you can tilt and/or swivel the monitor f or the most comfortable viewing angle. Note: The ba se is d eta ch ab le . Base Installa tion T ilt/Swivel Ba se[...]

User’s Manual 22 Setup 1 Attaching the Base Base Installa tion Attaching and Removing the Bose 1. Place the monitor upside-down on a flat work s urf ace. 2. Align the tabs on the base with t he correspond ing slots on the bottom of th e monitor . 3.Press t he base o nto the moni tor unti l the t abs are full y engaged i n the slots. 4. Push the b[...]

User’s Manual 23 Setup 2 Remo v ing the B ase Note: The base will a lign with the monitor slots i n only one po sition. Base Installa tion Attaching and Removing the Bose 5. Squeeze and pull up on the release l atch on the base. 6. Push the base towar d the back of the monitor and lift up to remove the base.[...]

User’s Manual 24 On-Scr een Display 1. Highlight button: The Highli ght Zone ensures cl ear ima ges on TVs, vid eo confer encing sys tems or phot os by emphasi zing a certai n area on t he scree n. 2. Exit butt on: Use this b utto n to E x it th e a ctiv e me nu or t he OSD. 3. Adjust butt ons: These but tons a llow you to highlight and adju st i[...]

User’s Manual 25 On-Scr een Display Adjust Brightness and Contras t. 1 Push t he ◀▶ ( ◑ ) or ▲▼ ( ) button. The b rightnes s/co ntrast di spla y will appear. 2 Push t he ▲ bu tton to increa se th e brigh tness or the ▼ b utton to decrease the brig htness . 3 Push t he ◀ button to incr ease the contr ast or the ▶ b utton to decre[...]

User’s Manual 26 On-Scr een Display Follow these instructions to change the Positio n of the monitor's entire display. 1 Push t he Me nu( ) but ton. 2 Pu sh the Menu( ) b utton to open the Positio n adju stment screen . 3 Us e the ▲ and ▼ b uttons to change the verti cal pos ition of th e moni tor's viewing area; us e the ◀ and ?[...]

User’s Manual 27 On-Scr een Display Follow these instructions to get a close-up or a longsh ot view of the monito r's viewing area . 1 Push t he Me nu ( ) but ton. 2 Push t he ◀ button or ▶ button until the Position/S ize scr een is displa yed. Push the ▲ but ton or ▼ button to selec t zoom. 3 Pu sh the Men u ( ) butto n to ope n the[...]

User’s Manual 28 On-Scr een Display Adjust the pincushio n setting when the sides of the display are bowed in or bowed out; adjust the trapezoid setting when the top or bottom of the display is too large or s mall. 1 Push t he Me nu ( ) but ton. 2 Push t he ◀ button or ▶ button until the G eometry screen i s display ed. push the ▲ button or[...]

User’s Manual 29 On-Scr een Display Adjust the sidepin corner correction when the sides of the di splay are bowed in or bowed out; adjust the side pin corner correction when the top or bottom of the display is too large o r small. 1 Push t he Me nu( ) but ton. 2 Push t he ◀ button or ▶ butto n until the Geom etry sc reen is displa yed. Push t[...]

User’s Manual 30 On-Scr een Display Color temperature is a measure of the 'warmth' of the image colors. The available range is between 5000 to 9300K. Follow these steps to chang e the color temperature and adjust individual R,G,B color control. Note: Recall does not reset t he color settings. 1 Push t he Me nu( ) but ton. 2 Push t he ?[...]

User’s Manual 31 On-Scr een Display Color temperature is a measure of the 'warmth' of the image colors. The available range is between 5000 to 9300K. Follow these steps to chang e the color temperature and adjust individual R,G,B color control. Note: Recall does not reset t he color settings. 1 Push t he Me nu( ) but ton. 2 Push t he ?[...]

User’s Manual 32 On-Scr een Display Adjust the linearity setting when the display image is compressed at the left,right or top,bottom. 1 Push t he Me nu( ) but ton. 2 Push t he ◀ button or ▶ button until the S creen OS D is displ ayed. Push the ▲ butto n or ▼ button to select Li nearity. 3 Pu sh the Men u( ) button to open the Linea rity [...]

User’s Manual 33 On-Scr een Display Convergence affects picture clarity. Adjust the horizonta l or vertical convergence to properly align the colo r dots that make up the image. 1 Push t he Me nu( ) but ton. 2 Push t he ◀ button or ▶ butto n until the Scree n OSD is di splayed . Push the ▲ but ton or ▼ button to selec t Converg ence. 3 Pu[...]

User’s Manual 34 On-Scr een Display Use the recall feature to reset these monitor settings to their original levels: Position, Size, Pincushion, Trapezoid, Parallelogram, Pinbalance, Rotation, Clear Moire. Note: If you have selected "Yes", all settings listed above will be reset. All other setting s wi ll remai n t he same. 1 Push t he [...]

User’s Manual 35 On-Scr een Display Use this menu to set yo ur monitor to the correct t ype of synchronization. Select 'Separate' if the computer is sending a separate synchronization signal. Select 'Sync. on Green' if the computer expects the monitor to sy nchronize with the green signal it sends. Refer to y our computer or v[...]

User’s Manual 36 On-Scr een Display You can see the frequency (user control mode) u sed by the u ser, the polarity of the operational signals, the default frequency (defa ult mode) set when you buy the monitor and the resolution level. Note: These screens do not allow any changes to t he settings, they are for information only. 1 Push t he Me nu [...]

User’s Manual 37 On-Scr een Display The menu will automatically turn off if no adjustments are made for a certain time period. You can set the amount of t ime the menu will wait before it turns off. 1 Push t he Me nu ( ) but ton. 2 Push t he ◀ button or ▶ button until the Menu screen i s displ ayed. Push the ▲ butto n or ▼ button to selec[...]

U ser’s M a nual 3 8 8 On-Scr een Display The Highlight Zone function can be optimized with a moving image and so please use it in the moving i mage screen. This function is to execute or cancel t he Highlight Zone. 1 Push t he Hi ghlight ( ) b utto n. 2 Push t he Me nu ( ) but ton. 3 Push t he ◀ button or ▶ button to cancel , execut e or enl[...]

User’s Manual 39 On-Scr een Display This funct ion is to adju st the size of the Highlight Z one. 1 Push t he Hi ghlight ( ) b utto n. 2 Push t he ◀ button or ▶ button to select th e Screen S ize Adjus tment and then pu sh the Me nu ( ) butto n. 3 Push t he ◀ button or ▶ button to move th e size o f the Highligh t Zone horizontal ly and u[...]

User’s Manual 40 On-Scr een Display This funct ion is to adju st the color of the Highlight Z one. 1 Push t he Hi ghlight ( ) b utto n. 2 Push t he ◀ button or ▶ button to select the Color Adju stment and then pu sh the Me nu ( ) butto n. 3 Push t he ▲ button or ▼ button to s elect a color fr om R, G or B. Push the ◀ bu tton or ▶ butt[...]

User’s Manual 41 On-Scr een Display This funct ion is to ad just the sh arpness of the Highlight Zo ne. 1 Push t he Hi ghlight ( ) b utto n. 2 Push t he ◀ button or ▶ button to sele ct the Sha rpness Adjust ment and then pu sh the Me nu ( ) butto n 3 Push t he ◀ button or ▶ button to adjust the sharpne ss of the High lig ht Zone . Menu Ho[...]

User’s Manual 42 On-Scr een Display Screen 1. B rightne ss Use this to adjust the brightness of the screen. 2. Cont rast Use this to adjust the clearnes s of the screen 3. Color Temperature Use this to adjust the color temperature of the screen from 9300K (bluish colors) to 5000K (reddish colors). MouScr een[...]

User’s Manual 43 On-Scr een Display Geometry 1. Pos iti on Use this to adjust the pos ition of the screen vertically o r horizontally. 2. Size Use this to adjust the size of the screen vertically o r horizontally. 3. Pincushion Use this to make the righ t and left vertical pins of th e screen straight. 4. Trapezoid Use this to adjust the horizo n[...]

U ser’s M a nual 4 4 On-Scr een Display High ligh t Zone 1. Pos iti on Use this to adjust the size of the Hig hlight Zone vertically or horizont ally. You cannot use this function if the Highlight Zone Full Screen function is on. 2. Size Use this to adjust the size of the Hig hlight Zone vertically or horizont ally. You cannot use this function i[...]

User’s Manual 45 On-Scr een Display More 1. Moir e Use this to remove circle or arc wavy patterns. 2. S ide Pin C or ner Use this to keep the si de pins of the scr een facing the oppos ite direction. 3. S ide Pin B alance Use this to keep the si de pins of the screen facin g the same direction. 4.Deg aus s Use this to remove spots on the screen ,[...]

User’s Manual 46 On-Scr een Display Other 1. Recall Use this to undo th e modified content in the current tab. However , there is no Recall function in the Highlight Zone tab. 2. Save Use this to save the updated content in the current tab. 3. Rese t Use this to make the cur rent status of the mon itor the same as the status when you b ought it. [...]

User’s Manual 47 T r oubl eshooting Check Lis t Before cal ling f or servi ce, check t he inf ormation i n this se ction to see if you can re medy any problems yourself . If you do need as sistance , please c all the p hone number on the warranty car d, the phone nu m ber on t he Informat ion sect ion or contact y our dealer . Symptom Che ck List[...]

User’s Manual 48 T r oubl eshooting Check Lis t Symptom Che ck List Solutions The image on the scr een is shak in g. Check the monit or conf ig uratio n to see if it i s in Int erlace Mode. (Inter lace Mode: V ertical frequenc y 43Hz, 87Hz(i), et c) The signal from the v ideo card exceeds the maxi mum resolution and frequency of the moni tor . Ar[...]

User’s Manual 49 T r oubl eshooting Check Lis t Symptom Che ck List Solutions The sc reen is p art ia lly distort ed. Are there an y magnetic products such as an adapter , speaker or a high voltage wire near the monitor? Enter the OSD and perform a "Degauss". Keep the monitor away from any magnetic produ cts. LED is blinki ng but no ima[...]

Check Lis t Check th e followi ng items i f there is trouble with th e monitor . Tip s for Highlight Zone 1. Check if the power c ord and the cable are pr operly con nected to the computer. 2. Check if the compute r beeps more than 3 ti mes when bo oting. (If i t does, req uest a n after- service for th e main board of the computer.) 3. If you i ns[...]

User’s Manual 51 T r oubl eshooting Q&A Question Answer How can I change the fr equency? Frequency can be changed by reconfi guring the video card. Note that vi deo card support c an vary , depending on the version of the dri ver used. (Refer to the c omputer or t he video c ard manual for details. ) How can I adjust the r esolution? Windows [...]

User’s Manual 52 T r oubl eshooting Q&A Question Answer I cannot ex ecute the pr ogram. Check the USB port of the monitor i f ther e is a root port or a hub USB port connected to the main body of the computer . If it is not connected pr operly , the following message wil l appear and you cannot execute the pro gram. If you see the above messa[...]

User’s Manual 53 T r oubl eshooting Q&A Question Answer There is no Highli ght Zone alt hough I turned the Highlig ht Zone on. Check to see if the Contrast value of the Highlight Zone is 0 or if you changed the mode without closi ng th e program. The Positi on, Size and t he Zoom functions of the Highlight Zo ne do not work. Check if the High[...]

U ser’s M a nual 5 4 T r oubl eshooting Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your c omputer and the monitor . 2. Unplug th e video cable fr om the back of the comput er. 3. T urn on the m onito r. If your monitor works nor mally, the following screen appe[...]

U ser’s M a nual 5 5 T r oubl eshooting If ther e is somethi ng wrong with the i nput s ignal , a mess age appea rs on the s creen or t he scr een go es bl ank although t he power indicator LED is stil l on. The mes sage may indi cate tha t the monit or is ou t of scan r ange or that yo u need to ch eck the signal c able. The loca tion a nd the p[...]

User’s Manual 56 Specifications General General Model Name SyncMas t er 957F S Picture T ube T ype 19"(48cm) DynaFl at (45.8cm vi ewable) Def l ec t i on a n gle 100 ° Dot P i tch 0.20 mm ( H o r i zon t al) Screen type Aluminized t ri-colo r phosphor dot t rio with bl ack matri x. Anti-doming in var shadow mask. Multi-l ayer coated wit h a[...]

U ser’s M a nual 57 Specifications Note: Design and specifications are subject to change without prior notic e. General Maximum Pixe l Clock 250 MHz Power Supply 90 ~ 264 V AC rms , 60/50 Hz ± 3Hz Power Consumption 1 2 0W (Max), 110 W (Nom) Dimensions (WxDxH) 446 x 413.5 x 450mm ( w i t h Stan d ) Weight 2 2 .0 k g Environmental considera tions [...]

U ser’s M a nual 58 Specifications If the signal transferred fro m the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs , the screen may go blank while the power LED is on . Refer to the video card manua l and adjust the sc reen as follows. Preset Ti ming Modes Di[...]

U ser’s M a nual 59 Specifications This monit or has a bui lt-in p ower management system called Po werSaver. Thi s system sa ves energ y by switchi ng your monit or into a l ow-power mode when it has not been us ed for a ce rtain amou nt of ti me. The monit or automatic ally ret urns to no rmal operatio n when you move the comput er's mouse[...]

U ser’s M a nual 6 0 Information Service ● U.S.A. Samsung Computer Products Customer Service 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel. : (973)601-6000, 1-800-SAMSUNG (1-800-726-7864) Fax. : (973)601-6001 http://samsungmonitor.com/ ● BRAZIL Samsung Eletronica da Amazonia Ltda.R. Prof. Manoelito de Ornellas, 303, Terro B Chacara [...]

U ser’s M a nual 61 Information • Dot Pitch The image on a monito r is compo s ed of red, gr een an d blue do ts. The c loser the dot s, the hi gher the res olution. The dist ance betwe en two do ts of the same color is called the ' Dot Pitch' . Unit: mm • Vertical Fre quency The scre en must be redrawn s everal times pe r second in[...]

U ser’s M a nual 62 Information • FCC Informati on User Instruc ti ons The Federal C ommunicati ons Commiss ion Radio Frequen cy Interfer ence Statement inclu des the follo wing warni ng: Note : This equipment h as been tested and found to com ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC R ules. These limits [...]

U ser’s M a nual 63 Information • IC Compliance Notice This Class B digital apparatus meets all requirements o f the Canadian Interferen ce-Causing Equipment Regulations of ICES-0 03. Cet appareil NumÈr ique de classe Brespecte toutes les exigences du R?glemo nt ICES-003 sur les Èquipemen ts produis ant des inte rfÈrences au Canada. • MPR [...]

U ser’s M a nual 64 Information • TCO'95-Ecolo gical requirements for per sonal compute rs (TCO applie d model only) AB general requirements AB2 Writ ten Eco-document acompanying the prod ucts Congratul ations! You have ju st purchased a TCO'95 app roved and la belled pro duct! Your choice h as prov ided you with a product develop ed [...]

U ser’s M a nual 65 Information TCO Devel opment Un it 1996-1 1-29 On the page this folder you will find a brief summary of the environmental requirements met by this product. The comple re environment al criter ia document m ay be ordered f rom: TCO Development Unit S-1149 4 Stock holm Sweden Fax: +46 8 782 9 2 07 E-mail (Internet): development@[...]

U ser’s M a nual 66 Information • TCO'99-Ecolo gical requirements for per sonal compute rs (TCO applie d model only) Congratul ations! You ha ve just pu rchased a TCO' 99 approv ed and labell ed pro duct! Your choice has prov ided you w ith a produ ct develop ed for profe ssional us e. Your purchas e has also contrib uted to reduci ng[...]

U ser’s M a nual 67 Information TCO Development SE-114 94 Sto ckholm, S weden Fax: +46 8 782 9 2 07 Email (Inter net): devel opm ent @tco. se Current in for mat ion regar di ng TCO'99 app rov ed and l abel le d pro ducts may also be ob tain ed via the Internet, using t he address: http ://www.tco-info.com/ Environment al require ments Flame [...]

U ser’s M a nual 68 Information • Natural Color Software Progr am One of the rece nt probl ems in us ing a comput er is that the col or of the image s printe d out by a prin ter or o ther images s canned by a scan ner or a digit al camer a are no t the sa me as thos e sh own on th e monitor . The Natural Col or S/W is the very sol ution for thi[...]

U ser’s M a nual 69 Information • Mou Scre en ™ S/W MouScreen Program requires built-in USB for use with SyncMaster Products. (Note: Sy ncMaster 1200NF does not s upport MouScreen.) MouScreen is a software program that controls the condition of the monitor by using the USB communications. It uses a mouse to con trol all the functions. You can[...]

U ser’s M a nual 70 Information Informati on in this document is s ubject to change without notice. ⓒ ⓒ ⓒ ⓒ 2001 Samsung Ele ctronics Co., Ltd. All rights rese rved. Reprodu ction in any manner w hatsoever with out the w ritten permiss ion of Sams ung Electro nics Co. , Ltd. is s trictly forbi dden. Samsun g Electronics Co., Ltd. shall no[...]