Samsung GH68-60614A manuale d’uso

OWNER’S MANUAL CDMA PORT ABLE CELLULAR TELEPHONE SCH-210[...]

3 T urn off the phone in a potentially explosive atmosphere such as below deck on boats, fuel or chemical transfer or storage facilities, and blasting areas. It is rare, but the phone or its accessories could generate sparks, which in the above-mentioned areas could cause an explosion or fire resulting in bodily injury or even death. Safety Precaut[...]

5 Contents 4 Front View of the Phone 6 Rear View of the Phone 7 Display Icons 8 Preparation Installing the Battery 9 Removing the Battery 9 Charging the Battery 10 More on Batteries 11 Checking the Battery Charge Level 12 Basic Operation T urning the Phone On and Off 13 Extending the Antenna 14 Making a Call 15 Prepending a Stored Number 16 Receivi[...]

7 Strap hole Receiving lamp Buzzer Antenna Speaker Display Keypad Microphone Flip SEND : Places the call after the phone number has been entered : Lets you review voice and text messages END : Ends a call PWR : Power on and off CLR : Clears messages and options without taking any action OK : Stores names and numbers in memory and selects highlighte[...]

9 1. Align the charged battery by resting it on the back of the phone with the battery terminals pointing downward. Place the top of the battery about 1/2 inch from the top edge of the battery opening. Displays the dialed numbers and the current status 2. Slide the battery upward until it clicks firmly into position. Y our phone is now ready to use[...]

11 Notes: • The wall outlet and plug vary according to country . • It is normal for the battery to become warm during charging. • When both the front and rear slots are occupied, both slots are charged at the same time. • When the temperature is too high or low , the charge lamp turns to yellow and the battery is in Standby mode until the t[...]

13 1. T o turn on the phone, press and hold PWR . Result: The phone: ◆ beeps ◆ displays your phone number , the greeting message and current date and time (In CDMA mode). Note: If the phone is locked, the message Locked displays. T o unlock the phone, press MENU , and then enter the lock code. The lock code is preset to 0000 at the factory . 2.[...]

15 1. Open the flip, and then press PWR. 2. Enter the desired telephone number , including the area code. 3. If you make a mistake: ◆ Press CLR once or more until the incorrect digit or digits are cleared. ◆ Continue entering the number . To clear the whole number , press and hold CLR . 4. When you have entered the whole number , press SEND . R[...]

1. Recall a number in memory . Note: To search for numbers and dial, see page 32. 17 The phone will ring only if the phone is turned on. If you are expecting a call, turn on the the phone. Note: When the phone is turned on, battery power is being used even if you are not in conversation. 16 6. When you have finished the call, press END or close the[...]

This feature allows you to mute the phone’s microphone, so that the other party cannot hear you or other sounds on your end. ☞ This function is available only during a telephone conversation. 19 1. Press MENU while you are on the phone. 2. Press 1 on the keypad. Result: The message MUTE displays. The other party connot hear you, but you can hea[...]

21 Returning Incoming Calls (Auto-dialing) 1. Press MENU . 2. Press 1 to select Call Logs. Last Number Redial Y our phone’s memory stor es the phone numbers of the last 10 outgoing calls and the last 10 incoming calls. Y ou can display these numbers and use them to automatically redial a r ecently called number or to return a r ecently received c[...]

23 Checking the Last Call or the Cumulative Air T ime 1. Press MENU . 2. Press 1 on the keypad. Erasing Numbers in Redial Memory 1. Press MENU . 2. Press 1 to select Call Logs. 3. Press 3 to select Erase Logs. 4. To erase... Press... outgoing 1 call numbers incoming 2 call numbers all numbers 3 5. ◆ To erase the numbers, press OK . ◆ To cancel [...]

25 1. Press MENU . 2. Press 2 on the keypad. 3. Press 2 to select Store. Result: The screen displays an area for you to enter the phone number . 4. Enter the desired telephone number of up to 36 digits, including the area code. Result: The number displays on the screen. 5. Press OK . Result: The screen displays the first available location. Erasing[...]

27 1. Enter the desired telephone number , then press OK . Result: The screen displays the first available location. Note: Y ou can use this feature while you are in conversation mode. 2. Follow Steps 6 through 8 under Storing Numbers in Memory on page 25. Note: Y ou can also store phone numbers while you are on the phone by pressing MENU , 3 , 2 i[...]

29 1. After you enter a phone number , the screen prompts you to enter a name. Press the key marked with the desired letter . Since each key has three or more letters, press the key repeatedly until the desired letter displays on the screen. Example: For the letter L , press the 5 key three times. To enter the same letter consecutively or two diffe[...]

31 To use One-T ouch dialing, press and hold the number of the location containing the number to be called. Result: The phone displays and dials the number automatically . One-T ouch Dialing Memory locations 0~9 are special One-T ouch dialing locations. Y ou can dial the numbers stored in 0~9 by pressing one key (do not pr ecede the numbers with a [...]

33 By Name 1. Press MENU . 2. Press 2 on the keypad. 3. Press 1 to select Recall by . 4. Press 1 to select Name. 5. Enter all or the first part of the name by pressing the keys marked with the desired letters. Example: Enter A to find all names beginning with the letter A. Note: To scroll through all names, skip this step. Searching for Numbers in [...]

35 By Partial Phone Number 1. Press MENU . 2. Press 2 on the keypad. 3. Press 1 to select Recall by . 4. Press 2 to select Digits. 5. Enter the part of the phone number that you remember . 6. Press OK . Result: The first number matching the request displays with: • memory location number • name (if any) Note: To scroll through all the numbers, [...]

37 To Erase a Specific Number by Name 36 1. Press MENU . 2. Press 2 on the keypad. 3. Press 3 to select Erase. 4. Press 1 to select by Name. 5. Enter all or the first part of the name by pressing the keys marked with the desired letters. 6. Press OK . Result: The matching name, phone number , and memory location number display . If you request a se[...]

39 To Erase All Numbers in Memory 1. Press MENU . 2. Press 0 on the keypad. 4. Press 6 to select Clr Memory . 3. Enter the lock code. Note: The lock code is preset to 0000 at factory . For details changing the Lock Code, see page 63. 38 5. T o... Press... Erase OK Cancel CLR 6. Press OK . Result: The screen displays ALL MEMORIES ARE CLEARED . Phone[...]

3. Press 2 to select Alert T ype. Press π or † until the desired alert type displays. ◆ BELL: The bell sounds, and the receiving lamp flickers. ◆ VIBRA TOR: The phone vibrates, and the receiving lamp filckers. ◆ LAMP: The receiving lamp flickers. Note: When lamp is selected, displays on the screen as a reminder that you will not hear an al[...]

43 1. Press MENU . 2. Press 3 on the keypad. 3. Press... T o select... 4 One-minute alert 5 Service alert Setting W arning Beeps Y ou can set the phone to sound warning beeps that indicate: ◆ each minute you are on a phone call ◆ when you are out of a service area or when you return to a service area 42 5. Press OK . 4. Press π or † to choos[...]

45 Y ou can check your own phone number . 1. Press MENU . 2. Press 4 on the keypad. Displaying Y our Own Phone Number 3. Press 2 to select My Phone #. Result: The message PHONE#:NAM- 1 and your own phone number displays. Notes: • If you have more than one own phone number (NAM-1, NAM-2), press π or † to check the next number . • Y ou can che[...]

47 To T urn Off the Keytone 1. Press MENU while you are in conversation mode. 2. Press 2 on the keypad. Result: The message SILENT displays. 3. Enter the desired number . Result: There is no keytone when you press the keys during a conversation. 46 Silent Scratchpad Y ou can enter a number during conversation without transmitting the beep tones to [...]

49 1. Press and hold MENU for at least one second. Result: The message -KEY LOCKED- displays and your phone does not operate when the keys are pressed. 2. T o turn off the feature, press and hold MENU or π for at least one second, or open the flip. Result: The message -KEY LOCKED- disappears. Note: Key lock will not work with the Hands-free Car Ki[...]

51 This feature allows you to use additional phone services, such as accessing an alternate long distance network, signaling a pager , or banking by phone. The following two sections explain how using Memory and Pause make it easier to send DTMF messages. Note: If SILENT displays, to turn on the keytone, see Silent Scratchpad on page 46. Using Memo[...]

53 1. Press MENU . 2. Press 6 on the keypad. 3. Press 1 to select Set. Result: The screen prompts you to enter a phone number . Note: If this feature is already set up, Remind Call , , reservation time and phone number display . If you wish to reset, press OK . 4. Enter the phone number you want to call at a specified time. 5. Press OK . Result: Th[...]

55 1. Press MENU . 2. Press 6 on the keypad. 3. Press 2 to select Release. Result: The message Release Remind Call? displays. 4. Press π or † : T o... Choose... Release the alert call YES Exit this function NO 5. Press OK . Result: The icon disappears. To T urn Off the Call Reminder Alert 54 Useful F e atures Setting or Changing Current T ime 1.[...]

57 Features Automatic Retry: When you dial a number and the call does not connect successfully , the phone will continue to redial the number automatically . Automatic Receiving: When a call comes in, the phone will answer the call automatically after 2 rings. Note: The Automatic Receiving feature does not work if you have chosen LAMP or VIBRA TOR [...]

59 Setting the Features 1. Press MENU . 2. Press 7 on the keypad. The function numbers for the features are: 1: Auto Retry (ON/OFF) 2: Auto Recv (OFF/ON) 3: Anykey Ans (OFF/ON) 4: T one Length (SHORT/LONG) 5: T one - 1: Rls. T one (OFF/ON) 2: Conn. T one (ON/OFF) 6: T ime - 1: Curr . Time (ON/OFF) 2: Call T ime (ON/OFF) 3: Set T ime 7: Auto Hyphen [...]

61 60 4. Press 1 to select Lock. 5. Press π or † to choose the status. The following selections are available: • OFF : No lock code required. • NOW : The phone will be locked immediately after you lock the phone. This mode requires that you enter the lock code to access the phone. • ON POWER-UP : You can use the phone after you lock the ph[...]

63 4. Press 2 to select Restrict function. Result: The restriction modes display . They are: 1. Phone Book 2. Incoming 3. Outgoing 5. Press the number of the mode you wish to select. 7. Press OK . 6. Press π or † to choose the status ( UNRESTRICT or RESTRICT ). 62 Security Features Security Features 6. Press OK . Note: If you enter fewer than 4 [...]

3. Enter the lock code. Note: The lock code is preset to 0000. 65 1. Press MENU . 2. Press 0 on the keypad. 4. Press 4 to select Emergency#. 5. Press the number (1, 2, or 3) where you wish to store the emergency number . Result: The screen prompts you to enter the phone number . 6. Enter the desired emergency number of up to 10 digits. 7. Press OK [...]

67 66 Choosing NAM NAM selection The NAM (Number Assignment Module) enables you to subscribe to one or more service networks. Y our phone has a manual and an Automatic mode for selecting the network. In the Manual mode, you set the phone to the network you want to use. In the Automatic mode, the phone selects the network automatically based on syst[...]

69 68 3. Enter the lock code. Note: The lock code is preset to 0000. T o change the lock code, see page 63. 1. Press MENU . 2. Press 0 on the keypad. 4. Press 9 to select System Sel. 5. Press π or † repeatedly until the desired mode displays. System Mode: A Only: Y our phone will use only system A. A Pref: Y our phone will seek service on system[...]

71 Setting the Phone to Send PIN 1. Press MENU . 2. Press 0 on the keypad. If your system supplier provides this service and you have a PIN assigned by the system supplier , you can set your phone to send the PIN when you make a call. This feature pr events the phone from being used by unauthorized persons. For information on this service in detail[...]

73 To Respond to the Call Waiting To Deactivate Call Waiting During a Particular Call If you don’t want to be interrupted during a particular call, you can temporarily deactivates the Call W aiting featur e. Contact your service provider for instr uctions on how to temporarily disable Call W aiting. 1. When you hear a short tone during a telephon[...]

75 1. Press key sequences supported by your service provider . 2. Enter the ten-digit phone number (area code+phone number) of the forward-to phone number . 3. Press SEND . Y ou will hear a tone that confirms that you have activated Call Forwarding. 74 Call Forwarding To Activate Call Forwarding 1. Press key sequences supported by your service prov[...]

77 Retrieving Messages in V oice mail Contact your service provider to activate this feature. 3. Press SEND . Result: Y our phone calls and connects to the voice mail center . 1. Press . Result: Y our phone displays the message options you can choose; 1:Voice , 2:Text , 3:Erase All , 4:SMS Alert . Press π or † to view the options. 2. T o listen [...]

79 1. When you are reading a text message, if the person who called you left a callback number , your phone displays the page number . 2. Y ou can return the call immediately by pressing SEND . 1. Press . 2. Press 3 to select Erase All. 3. T o... Press... Erase all messages OK Cancel or Exit CLR this function 78 Callback Erasing All Messages Option[...]

81 1. Do not allow water to get into the phone, particularly the battery . Do not spray aerosol cleaners directly on the phone, because excess liquid could seep under the keypad. 2. Do not use abrasive powders, sponges, or solvents of any kind (i.e., trichlorethylene or acetone) as they may damage the plastic surfaces. Cleaning Y our Cellular Phone[...]

83 DO NOT disassemble the battery . There are no user -serviceable parts inside it. DO NOT drop a battery or subject it to physical shocks. Do not open or puncture the battery ; the released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Keep the batteries out of children’ s reach. If the batterie[...]

85 84 Whip antenna and protection cover Cigarette Lighter Charger (CLC 58) Enables you to charge your batteries in your vehicle. T ravel Charger A smaller charger , convenient for packing, for those who travel. W all mount type (TC 58): 110V only . Cable type (TC 59): 220V only . Battery Standard capacity battery (BTL 958) Extended capacity battery[...]

87 86 Nothing displays ◆ Check that the battery has been charged and installed correctly. ◆ Check that the phone has been turned on ( PWR key pressed for more than one second). Y ou have entered a phone number , but the phone is not dialing it. ◆ Have you pressed the SEND button? ◆ Is the cellular phone service currently available (SVC disp[...]

89 88 MAINTENANCE REQUIRED MEMORY (00-99) IS FULL PHONE BOOK RESTRICTED Replace? replace:OK NO INCOMING CALL LOG NO MATCH NUMBER NO OUTGOING CALL LOG NO SERVICE IN. CALL IS RESTRICTED OUTGOING CALL IS RESTRICTED REDIAL CALL FAILED The phone number is not r egister ed in the base station. There is no empty location under which you can store phone nu[...]

91 90 THE PHONE’S INTERNAL PHONE BOOK Storing numbers MENU + 2 + 2 + phone number in memory + OK + OK (or assign another location + OK ) + name + OK or phone number + OK + OK (or assign another location + OK ) + name + OK Calling numbers by •One-touch 0-9 (Hold the last digit of the hot line memory 00-09) •T wo-touch 10-99 (Briefly press the [...]

93 92 Call reminder alert •T urn on MENU + 6 + 1 + Phone number + OK + time + OK •T urn of f MENU + 6 + 2 + π / † + OK Setting current time MENU + 7 + 6 + 3 + time + OK Customizing your phone •Automatic retry MENU + 7 + 1 + π / † + OK •Automatic receiving MENU + 7 + 2 + π / † + OK •Any key answer MENU + 7 + 3 + π / † + OK •T[...]

95 94 OPTIONAL FEA TURES Call waiting •T o r espond (when you hear a beep during a phone conversation) + SEND (to switch back) + SEND •T o deactivate Contact your service provider . Setting up 3-way calling 1st phone number + SEND + 2nd phone number + SEND + SEND Call forwarding Contact your service provider . Message service •T o r etrieve v[...]

97 96 5:AnalogCall - YES/NO 6:RemindCall 1:Set 2:Release - YES/NO 7:Setup 1:Auto Retry - ON/OFF 2:Auto Recv - OFF/ON 3:Anykey Ans - OFF/ON 4:ToneLength - SHORT/LONG 5:Tone 1:Rls. Tone - OFF/ON 2:Conn. Tone - ON/OFF 6:Time 1:Curr. Time - ON/OFF 2:Call Time - ON/OFF 3:Set Time 7:AutoHyphen - OFF/ON 0:Security 1:Lock - OFF/NOW/ON POWER-UP 2:Restrict 1[...]

Printed in Korea ‘98/1 Rev . 1.0 GH68-60614A[...]