Samsung ME46B manuale d’uso

BN46-00098G- 03 User Manual ME32B ME40B ME46B ME55B The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance.[...]

Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 11 Copyright 12 Cleaning 12 Storage 13 Safety Precautions 13 Symbols 14 Electricity and Safety 15 Installation 17 Operation PREPARATIONS 22 Checking the Contents 22 Removing the Packaging 23 Checking the Components 25 Parts 25 Control Panel 27 Reverse Side 28 Anti-theft Lock 29 Remote [...]

Table Of Contents Table Of Cont ents 3 CONNECTING AND USING A SOURCE DEVICE 54 Before Connecting 54 Pre-connection Checkpoints 55 Connecting and Using a PC 55 Connecting to a PC 58 Changing the Resolution 60 Connecting an External Monitor 61 Connecting to a Video Device 61 Connection Using the AV Cable 61 Connection Using the Component Cable 62 Con[...]

Table Of Contents Table Of Cont ents 4 72 What is MDC? 72 Connecting to MDC 74 Connection Manag ement 75 Auto Set ID 76 Cloning 77 Command Retry 78 Getting Started with MDC 80 Main Screen Layout 81 Menus 83 Screen Adjustment 86 Sound Adjustment 87 System Setup 96 Tool Settings 98 Other Functions 103 Troubleshooting Guide SCREEN ADJUSTMENT 105 Pictu[...]

Table Of Contents Table Of Cont ents 5 111 Advanced Settings 111 Black Tone 111 Dynamic Contrast 111 Shadow Detail 112 Gamma 112 Expert Pattern 112 RGB Only Mode 112 Color Space 112 White Balance 113 10p White Balance ( Off / On ) 113 Flesh Tone 113 Edge Enhancement ( Off / On ) 113 Motion Lighting ( Off / On ) 113 LED Motion Plus ( Off / On ) 114 [...]

Table Of Contents Table Of Cont ents 6 123 Channel 123 Channel Manager 126 Antenna 126 Auto Program 127 Clear Scrambled Channel 127 Fine Tune 128 MagicInfo Lite 128 Videos 128 Playing a Video 132 Photos 132 Viewing a Photo (or Slide Show ) 133 Music 133 Playing Music 135 Videos / Photos / Music - Additional Functions 135 Sorting the file lists 136 [...]

Table Of Contents Table Of Cont ents 7 151 MagicInfo Lite Settings SYSTEM 152 Plug & Play 153 Multi Control 153 Configuring settings for Multi C ontrol 154 Time 154 Clock 155 Sleep Timer 155 On Timer 156 Off Timer 156 Holiday Management 157 Menu Language 157 Eco Solution 157 Energy Saving 158 Eco Sensor ( Off / On ) 158 No Signal Power Off 158 [...]

Table Of Contents Table Of Cont ents 8 168 Video Wall 168 Video Wall 169 Format 169 Horizontal 169 Vertical 170 Screen Position 171 Source AutoSwitch Settings 172 General 172 Max. Power Saving 172 Game Mode 173 BD Wise 173 Auto Power 173 Standby Control 173 Lamp Schedule 173 OSD Display 174 Power On Adjustment 174 Temperature Control 174 Device Nam[...]

Table Of Contents Table Of Cont ents 9 MAGICINFO LITE 182 File Formats Compat ible with MagicInfo Lite Player 182 Video / Audio 186 Network Schedule 186 Connecting to a server 187 MagicInfo Lite Settings 187 Approving a connected device from the server 190 Setting the current time 191 Local Schedule 191 Local Schedule Manager 191 Registering a Loca[...]

Table Of Contents Table Of Cont ents 10 209 Q & A SPECIFICATIONS 211 General 213 PowerSaver 214 Preset Timing Modes 216 License APPENDIX 217 Contact SAMSUNG WORLDWIDE 218 Responsibility for the Pay Service (Cost to Customers) 218 Not a product defect 218 A Product damage caused by customer's fault 218 Others 219 Optimum Picture Qu ality an[...]

11 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to cha nge without n otice to im prove qual ity. © 2012 Samsung Electronics Samsung Electro nics owns the copyrigh t for this manual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronics i[...]

12 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. Storage High-glossy models can develo p[...]

13 Before Using the Product Before Using the Product Safety Precautions Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTR IC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicat es that high vo ltage is presen t insid[...]

14 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket. z An electric shock or fire may re sult. Do not use m ultiple pr oducts with a singl[...]

15 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord wh ile the produc t is being used. z The product may become damaged by an electric sho ck. Only use the p ower cord pr ovided with yo ur produc t by Samsung. Do not use the power cord with other pro ducts. z A fire or electric shoc k m[...]

16 Before Using the Product Before Using the Product Keep the plastic packa ging out of the reac h of children. z Children may suffoca te. Do not install t he product on an unst able or vibrating surfac e (insecure shelf, sloped surfa ce, etc.) z The product may fall and become dam aged and/or ca use an injury. z Using the produ ct in an area w ith[...]

17 Before Using the Product Before Using the Product Caution Operation Warning Do not drop the product while m oving. z Product failure o r person al injury may result. Do not set down the product on it s front. z The screen may beco me damaged. When installing the pr oduct on a cabi net or shelf, make su re that the bottom edge of th e front of th[...]

18 Before Using the Product Before Using the Product If the product ge nerates abnorma l sounds, a burning smell or smoke, discon nect the power co rd immediate ly and contac t Samsung Custo mer Service Ce nter. z An electric shock or fire may re sult. Do not let childre n hang from the pr oduct or cli mb on top of it. z Children may become injur e[...]

19 Before Using the Product Before Using the Product Caution Ensure the vents are not b locked by t ablecloths or curtains. z An increased inter nal tempe rature may cau se a fire. Do not insert m etallic objects (c hopsticks, coins, h airpins, etc) or objects that burn easily (paper, mat ches, etc) in to the prod uct (via the vent or input/output [...]

20 Before Using the Product Before Using the Product Looking at the screen too close for an exte nded period of time ca n deteriorate your eyes ight. Do not use humidifi ers or stoves ar ound the prod uct. z A fire or electric shoc k may result. Rest your eye s for mor e than 5 minu tes for ev ery 1 hour of product use. z Eye fatigue will be relie [...]

21 Before Using the Product Before Using the Product When replacing the battery, inser t it with the rig ht polarity (+, -). z Otherwis e, the bat tery may beco me dama ged or it ma y cause fire , personal injury or damage due to leak age of th e internal liquid. The batteries (and rechargeab le batteri es) are not ordi nary refuse and must be retu[...]

22 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Remove the blac k locking device at the bottom of the box. 2 Using the grooves in the bo x, lift and remove the t op of the box. 3 Check the compo nents and remove the styrofoam an d plastic bag . The appearance of actual components may differ from the image s[...]

23 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the vendor where you purchased the product if any components are missing. z The appearance of the components and items sold separately may differ from the image shown. z A stand is not provided with the product. To install a stand, you can purchase one separately. Components C[...]

24 Preparations 1 1 Preparations Items sold separately z The stand is not supplied. z The following items can be purchased at your nearest retailer. Wall-mount Kit RS232C-Stereo cable DVI cable HDMI-DVI cable HDMI cable DP cable RCA stereo ca ble Video cable LAN cable Stereo cable Component cable RCA cable External sensor Kit Network Box[...]

25 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z Keep the area between the remote sensor and remote control obstacle-free. Sensor Description Selects the input so urce that an external de vice is con[...]

26 Preparations 1 1 Preparations Use this button for turning the Display on and off. Remote sensor Receives signals from the remote To control t he remote c ontrol in fro nt of the pr oduct, low er the rem ote control sen sor in the di rection of the arrow (indicated in the zoom ed-in image on the pr evious page) . Keep the area between the remote [...]

27 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n [IR / AMBIENT SENSOR IN] Supplies power t o the externa l sensor boar d or receives the light sensor signal [IR OUT] Receives the inpu t signal via [...]

28 Preparations 1 1 Preparations Assembling the Holder-Wire stand z Stand: Sold se parately 1.2.3 Anti-theft Lock z An anti-theft lock allows you to use th e product securely even in public places. z The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for detai[...]

29 Preparations 1 1 Preparations 1.2.4 Remote Control z Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. z Remote control button functions may differ for different products. Power off the product. Not available. Return to the previous menu. Change[...]

30 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Media , Network , System or Support in the displayed OSD menu scre en. 3. Chang e settings as desired. 4. Finish setting. 5. Close the onscree n display (OSD) menu. 1 3 2[...]

31 Preparations 1 1 Preparations Remote Control Reception Range Use the remo te control with in 7m to 10 m from th e sensor on t he produ ct at an ang le of 30˚ fro m the le ft and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together . Replace both batteries at the same time. z Remove bat[...]

32 Preparations 1 1 Preparations 1.2.5 Connection Using an IR Stereo Cable Controlling more than one display pr oduct using your remote control z Connect the [ IR OUT] port on the pr oduct to th e [IR / AMBIEN T SENSOR IN ] port on th e other display product usin g the dedicated ster eo cable. z A command sent from the remote con trol pointed a t p[...]

33 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. z Ensure that an authorized installa tion company installs the wall mount. z Otherwise, it may fall and cause personal injury. z Make [...]

34 Preparations 1 1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details. When installing the product on an indented wall, al low at least the space specified above between the product and wall for ventilation and ensure th at the ambi[...]

35 Preparations 1 1 Preparations 1.4 Dimensions Unit: mm (inches) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors. 1 2 3 4 5 Model name ME32B 733.7 (28.9) 698.4 (27.5) [...]

36 Preparations 1 1 Preparations 1.5 Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount. We recommend y[...]

37 Preparations 1 1 Preparations Unit: mm (inches) Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock. z Standard dimensions for wall mount kits are shown in the table below. z Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly [...]

38 Preparations 1 1 Preparations 1.6 Remote Control 1.6.1 Cable Connection RS232C Cable z Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No. 3), GND (N o. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin Signal 1 Detect d ata car rier 2 Received data 3 Tra[...]

39 Preparations 1 1 Preparations z RS232C cable Connector: 9-Pin D-Sub to Stereo Ca ble LAN Cable z Pin assignment -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 3 2 5 Tx Rx Gnd STEREO PLUG (3.5ø) Pin No. Standa rd Col or Signal 1 W hite and oran ge TX+ 2 Orange TX- 3 Wh ite and gree n RX+ 4 Blue NC 5 White and blue[...]

40 Preparations 1 1 Preparations z Connector: RJ45 Direct LAN cable (PC to HUB) Cross LAN cable (PC to PC) Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ TX- 2 <-- ------> 2 T X- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 P 2 Signal TX+ 1 <------- -> 3 R X + TX- 2 <--------> 6 RX- RX+ 3 <--------> [...]

41 Preparations 1 1 Preparations 1.6.2 Connection z Connection 1 z Connection 2 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT RJ45 RJ45[...]

42 Preparations 1 1 Preparations z Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

43 Preparations 1 1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command z Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. z All communications take place in hexadecima ls. The checksum is calculated by adding u p all values except the he ader. I[...]

44 Preparations 1 1 Preparations z To control all de vices connecte d by a serial ca ble simultaneous ly irrespective of IDs, set the ID as "0xFE" and transm it commands. Co mmands will b e executed by each device but ACK will not respond. Power control z Function A TV/monitor can be pow ered on and off using a PC. z Viewing power state ([...]

45 Preparations 1 1 Preparations Volume control z Function The volume o f a TV/mon itor can be adjusted u sing a PC. z Viewing volume sta te (Get Volume Stat us) z Setting the vo lume (Set Volu me) "Volume": Volume value code to be se t on a TV/mo nitor (0-100) z Ack "Volume": Volume value code to be se t on a TV/mo nitor (0-100[...]

46 Preparations 1 1 Preparations Input source control z Function The input so urce of a TV/mo nitor can be ch anged using a PC. z Viewing input sour ce state (Get Input Source Stat us) z Setting the in put source (Set Input Sour ce) "Input Source ": An input sou rce code to be set on a TV/mon itor  DVI_video, HDMI1_PC and HDMI2_PC cann[...]

47 Preparations 1 1 Preparations z Ack "Input Source ": An input sou rce code to be set on a TV/mon itor z Nak "ERR": A code show ing what error has occurred Header Command ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘A’ 0x14 "Input Source" Header Command ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0[...]

48 Preparations 1 1 Preparations Screen z Function The screen mode of a TV/monitor ca n be chan ged using a PC. Screen mode cannot b e controlled w hen the Video Wall function is enabled. This control can only be used on models that include a TV. z Viewing scree n status (Get Screen Mode Status) z Setting the p icture size (Set Pict ure Size) "[...]

49 Preparations 1 1 Preparations Screen size control z Function The screen size of a TV/mo nitor c an be chang ed using a PC. z Viewing the screen size (Ge t Screen Size Stat us) z Ack "Screen Size": TV/ monitor screen size (range: 0 – 25 5, unit: inch) z Nak "ERR": A code show ing what error has occurred Header Command ID Dat[...]

50 Preparations 1 1 Preparations PIP On/Off control z Function The PIP mode of a TV/monitor can be turned on or off using a PC.  Only available on models that have the PIP function.  The mode cannot be controlled if Video Wall is set to On .  This function is not available in MagicInfo . z Viewing PIP on/off state (Get the PIP ON / OFF Sta[...]

51 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically ad just the PC system screen usin g a PC. z Viewing auto adjustm ent state (Get Auto Adjustmen t Status) None z Setting auto adjustment (Set Auto Adjustm ent) "Auto Adjustment" : 0x00 (at all times) z Ack z Nak "ERR": A code show [...]

52 Preparations 1 1 Preparations Video Wall Mode Control z Function Video Wall mode c an be activa ted on a TV/monitor us ing a PC . This contro l is only available on a TV/m onitor who se Video Wall is enab led. This function is not available in MagicInfo . z Viewing video wall mode (Get Video Wall Mode) z Setting the video wall (Set Video Wall Mo[...]

53 Preparations 1 1 Preparations Safety Lock z Function PC can be us ed to turn t he Safety Loc k function on or off on a TV/monitor. This contro l is available regardless o f whether or not the power is tur ned on. z Viewing the saf ety lock state (G et Safety Lock Status) z Enabling or disabling safety lock (S et Safety Lock Ena ble / Disable) &q[...]

54 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before you connect this pro duct with other devices. Devices that can be conn ected to this p roduct include PCs, camcor ders, speake rs, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints z Before c[...]

55 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable. z A PC can be conne cted to the product in a variety o f ways[...]

56 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN RGB / DVI / HDMI AUDIO IN HDMI IN[...]

57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN[...]

58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d. Changing the Resolution on Windows XP Go to Cont[...]

59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and chan ge the resolution. 12 34[...]

60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting an External Monitor z The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI IN] on another display. z Up to Full HD resolution can be supported. Compatible input so[...]

61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting to a Video Device z Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable. z You can con nect a vide o device to th e produc t using a c able.  Connecting [...]

62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.3 Connection Usin g an HDMI-DVI Cable z Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a vi[...]

63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p ) z For better p icture and audio quality, connect to a digital de vice using an HDMI cable. z An HDMI cable suppo rts digital vide o and audio signals, and does not requ ire an audio ca ble.  To connec t the TV[...]

64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.5 Connecting to an Audio System 2.4.6 Connecting to an Antenna The initial settings p rocess runs automatic ally when the produ ct is turned on f or the first tim e after purchase. Take extra care to ensure the wires inside the cable do not bend. AUDIO OUT ANT IN [...]

65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box (Sold separately) Connect the DP-HDM I cable to the [HDMI IN] port on the product and the [MAGICINFO OUT] port on the network box . For details on how to connect to a network box, refer to the user's manual provided with the network[...]

66 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 3 Select the d efault applicat ion you want to r un when MagicInf o starts. 4 Enter the IP in formation. MagicInfo Setup Wizard - v .1.12 Select Application - step 1 MagicInfo Pro (LAN, W AN based version) MagicInfo-i Premium (Web-based version) Select Later < Back[...]

67 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 5 Select a language. (T he default la nguage is English .) 6 Select a display mode . MagicInfo Setup Wizard - v .1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language : Engilsh German English French [...]

68 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 7 Double-check the settings yo u have just co nfigured. z If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen. z For further details on how to use MagicInfo , refer to the MagicI[...]

69 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.6 Changing the Input source 2.6.1 Source MENU [] Media Source ENTER [ ] Source allows you to select a variety of sources an d change sour ce device names. Source You can display the screen of a source device connec ted to the p roduct. Select a source fro m Source L[...]

70 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an applicati on that allows you to eas ily control multi ple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settin gs for Multi Control z MDC Connectio[...]

71 Using MDC 3 3 Using MDC 3.2 MDC Program Installation/Uninstallation 3.2.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not di splayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 Click "Nex[...]

72 Using MDC 3 3 Using MDC 3.3 What is MDC? Multiple display control "MDC" is an application that allows you to easily control mu ltiple display devices simultaneously us ing a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C ser ial cable mus t be connec ted to the se rial ports on t he [...]

73 Using MDC 3 3 Using MDC Using MDC via Ethernet Enter the IP for the prima ry display devic e and conne ct the de vice to the PC. One d isplay device c an connect to an other using an RS-232C serial ca ble. Connection using a direct LAN cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Con[...]

74 Using MDC 3 3 Using MDC 3.3.2 Connection Management Connection m anagement includes th e Connect ion list and Connection list modification opt ions . Connection list - Connection list shows the det ails of the connec tions such as c onnection setting (IP/ COM, Port No, MAC, and Conn ection T ype ), co nnection st atus, Set ID Ra nge , and detect[...]

75 Using MDC 3 3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs connected in d aisy-chain of a sele cted connection. There can b e a maximu m of 100 L FDs in a conn ection. Th e Set ID is a ssigned sequ entially in the da isy- chain runnin g from 1 to 99, and then finally to Se t ID 0.[...]

76 Using MDC 3 3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the settin g of one LFD and ap ply it to mu ltiple selected LF Ds. You can select specific tab cat egories or all t ab categories fo r cloning, using the copy settin g option window.[...]

77 Using MDC 3 3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of time s the MDC command will be retried in case of there being no reply or a corrupte d reply fro m an LFD. Th e retry co unt value ca n be set us ing the MDC options window. The retry co unt value must be between 1-10. The defau lt value is 1.[...]

78 Using MDC 3 3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program , click Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device. z If the connect ion is established via RS232C, go to Serial and spec ify the COM Port .[...]

79 Using MDC 3 3 Using MDC z If the connect ion is established via Ether net , enter the IP th at was entere d for the disp lay device.[...]

80 Using MDC 3 3 Using MDC 3.3.7 Main Screen Layout Menu Bar Change the status of a display device or the properties of the program . Device Category View a list of connec ted displa y devices or device groups. Schedule Category View a list of schedules for display devices . Set List Select the display device you want to adjust. Modify the Set List[...]

81 Using MDC 3 3 Using MDC 3.3.8 Menus You can power on or off a selec ted device or chan ge the input source or volume of the device. Choose display device s from the lis t of sets, an d select the Home tab. Home Select an item an d change the co rresponding set ting. Power z On : Power on a selected display. z Off : Power off a sele cted display [...]

82 Using MDC 3 3 Using MDC Alert z Fault Devic e  This menu sh ows a list of d isplay devices which hav e following er rors - fan e rror, temp erature error, brigh tness sensor error, or lamp erro r. Select a display device from th e list. The Repair button will be en abled. Click the ref resh button to refresh t he error status of th e display [...]

83 Using MDC 3 3 Using MDC 3.3.9 Screen Adjustment The screen s ettings (c ontrast, brightness, et c.) can be adjusted. Choose display device s from the lis t of sets, an d select the Picture tab. Custom Select an item an d change the co rresponding scree n setting. z Color and Tint are not available if the input source is PC . z Red , Green , Blue[...]

84 Using MDC 3 3 Using MDC Blue z Customize the intensity of blue co lor for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the g amma value f or the selec ted displa y. Auto Motion Pl us This option is u sed to v iew dynamic images. z Off : Disable the Auto Mo[...]

85 Using MDC 3 3 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode th at does not suppor t detailed configur ation. The -/+ butt ons can b e used to ad just Zoom . The screen c an be reloca ted using t he up/do wn/left/right buttons. Detail You can v[...]

86 Using MDC 3 3 Using MDC 3.3.10 Sound Adjustment You can chan ge the sou nd settings. Choose display device s from the lis t of sets, an d select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for th e selected display. Treble Adjust the treb le for the selec ted disp[...]

87 Using MDC 3 3 Using MDC 3.3.11 System Setup Choose display device s from the lis t of sets, an d select the System tab. Video Wall The Vide o Wall functio n can be used to display part of a whole picture or repea t the same picture on each of connec ted multiple d isplay devices. Video Wall is enabled only when devices are in the group. Video Wa[...]

88 Using MDC 3 3 Using MDC H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display d evices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to [...]

89 Using MDC 3 3 Using MDC PIP Basic information re quired to adjust PIP will app ear in the men u screen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the curr ent displa y. PIP Source Select a PIP input source. Sound Select Select and enable the sound fr om eith[...]

90 Using MDC 3 3 Using MDC General User Auto Color Automatically adju st the screen color s. Available only in PC mode. Auto Power Set the prod uct to autom atically po wer on. Standby Control Set the stan dby mode to activate if a n input source is not d etected. Fan & Temperature Configure the settings requ ired to de tect the fan speed an d [...]

91 Using MDC 3 3 Using MDC Security Safety Lock Lock the on -screen m enus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a messa ge when the Source is chang ed. Not Optimum Mode OSD Select whethe r to[...]

92 Using MDC 3 3 Using MDC Time Clock Set Change the c urrent time o n the selec ted displa y device accor ding to th e time set on a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time to powe r on the s elected disp lay device. z Off Time : Set the time to power off the selected display [...]

93 Using MDC 3 3 Using MDC  Once : Activate the timer only on e time.  EveryDay : Activat e the timer ever y day.  Mon~Fri : Activa te the timer from Monday th rough Friday.  Mon~Sat : Activate the timer from Mo nday throug h Saturday.  Sat~Sun : Activate the tim er on Saturdays and Sundays.  Manual : Customize days of the week. T[...]

94 Using MDC 3 3 Using MDC Screen Burn Protection Pixel Shift Move the scr een slightly at specified time intervals to prevent scre en burn-in . Screen Saver This function p revents scr een burn-in whe n the scre en of the s elected disp lay device is left idle fo r an extended period of time . z Interval : Set the interval to a ctivate the Screen [...]

95 Using MDC 3 3 Using MDC Safety Screen The Safety Screen function can be use d to prev ent screen bu rn-in when a stationar y image disp lays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backligh t to reduce power co nsumption. Automatically adju st the backligh t of the selecte[...]

96 Using MDC 3 3 Using MDC 3.3.12 Tool Settings Security Panel Control Turn on or off the scre en of a display device. Remote Control Enable or disable the remote co ntrol. Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settin gs. Reset All Reset the screen, soun d and system set[...]

97 Using MDC 3 3 Using MDC Edit Column Select the items you want to disp lay in the list of sets. Information View the program informati on. 3 4[...]

98 Using MDC 3 3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mou se pointer on a corn er of the pr ogram win dow. An arro w will appe ar. Move the arrow to customize the size of the program window.[...]

99 Using MDC 3 3 Using MDC Group Management Creating G roups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side o f the program window. 2 In the Edit Group window displayed, click Add on the same le vel or Add on t[...]

100 Using MDC 3 3 Using MDC z Add on the sub level : Create a sub-group under the selected grou p. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a grou p name, and click Edit . 2 In the Edit Grou[...]

101 Using MDC 3 3 Using MDC Schedule Management Creating Sch edules Create and r egister a sc hedule on a group ba sis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the prog ram window. The Add button will be enable d in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

102 Using MDC 3 3 Using MDC 3 Click Add belo w the Device Gr oup item, and select the group you wa nt to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window. z Device Gr oup : Sele ct a group . z Date&Time  Instant Execut ion : Run the schedule[...]

103 Using MDC 3 3 Using MDC 3.3.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want t o control does not ap pear on th e system information chart. 1. Check the co nnection o f th[...]

104 Using MDC 3 3 Using MDC How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Settin gs for the se lected dis play are displaye d. 3 When two displays are selected (e. g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed b[...]

105 4 Screen Adjustment 4 Screen Adjustment Configure the Picture settings ( Brightness , Color Tone , etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [] Picture Picture Mode ENTER [ ] Select a picture mode ( Picture Mode ) suitable for the enviro nment where the pr oduct will be used . Differe[...]

106 Screen Adjustment 4 4 Screen Adjustment 4.2 Backlight / Contrast / Brig htness / Sharpness / Color / Tint (G/R) MENU [] Picture ENTER [ ] Your monitor has several options for ad justing picture quality. Select an option using th e and arrow keys, and the n press [ ]. Use the arrow ke ys to adjust the option value or se lect an o ption setting. [...]

107 Screen Adjustment 4 4 Screen Adjustment 4.3 Screen Adjustment MENU [] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various pic ture size and aspect ra tio options. Select an option using the and arrow keys, and th e press [ ]. Use the a rrow keys to select an optio n in the sub-me nu, and then press [ ]. Different Screen Adjus[...]

108 Screen Adjustment 4 4 Screen Adjustment Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty. z Screen Fit : Displays the full image without any cut-off when HDM I (720p / 1080i / 1080p) or [...]

109 Screen Adjustment 4 4 Screen Adjustment 4.3.2 Position Adjusts the picture po sition. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , Screen fit or Custom . z To use the Position fu nction after selecting Zoom1 , Zoom2 , Wide Fit , Screen fit or Custom , follow these steps. 1 Press the button to sele ct Position [...]

110 Screen Adjustment 4 4 Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even whe n the resolution of the graphics card is one of the following , you can optimize the p icture qua lity by select ing the sam e resolution for the pro duct as th e PC using this menu. Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x[...]

111 Screen Adjustment 4 4 Screen Adjustment 4.5 Advanced Settings MENU [] Picture Advanced Settings ENTER [ ] All Advanced Sett ings are available in the Standard and Movie mod es. To use, select an option us ing the up and down arrow keys, and t hen press [ ]. Use t he arrow key s to chang e the valu e or setting , and then press [ ]. In PC mode, [...]

112 Screen Adjustment 4 4 Screen Adjustment 4.5.4 Gamma Adjust the primary color intensity. 4.5.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD me nu disappe ars or a men u other than the Pictur e menu is o pened, the product saves the ca libration and the Expert Pattern screen disappears. z Off Turns the Exper[...]

113 Screen Adjustment 4 4 Screen Adjustment 4.5.9 10p White Balance (Off / On) Controls th e white bala nce in 10 p oint interva l by adjustin g the red , green, and blue brig htness. z Interval : Select interval to adjust . z Red : Adjust the red level. z Green : Adjust the green level. z Blue : Adjust the blue l evel. z Reset : Resets the 10p Whi[...]

114 Screen Adjustment 4 4 Screen Adjustment 4.6 Picture Options MENU [] Picture Picture Options ENTER [ ] Select an option u sing the and arrow keys, an d the press [ ]. Use the ar row keys to chan ge the setting, and the n press [ ]. In PC mode, you can only make changes to the Color Tone . 4.6.1 Color Tone z Off / Cool / Standard / Warm1 / Warm2 [...]

115 Screen Adjustment 4 4 Screen Adjustment 4.6.3 Digital Noise Filter If the broadca st signal received by your produc t is weak, you can activate the Digital Noise Filt er fe ature to reduce any stat ic and ghosting that may appear on the screen. z Off / Low / Medium / High / Auto / Auto Visualization z Auto Visuali zation : When changing a nalog[...]

116 Screen Adjustment 4 4 Screen Adjustment z Smooth : Sets Auto Motion Plus to Smooth (suitable for viewing moving im ages naturally) mode. z Custom : Use to r educe the afterimag e and judder as much as you want. z Demo : Demonstrates Auto Motion Plus (the picture will be displayed on the left half of the screen when Auto Motion Plus is set to On[...]

117 5 Sound Adjustment 5 Sound Adjustment Configure the sound ( Sound ) settings for the product. 5.1 Sound Mode MENU [] Sound Sound Mode ENTER [ ] Use the up an d down ar row keys to se lect an op tion, and the n press [ ]. z Standard : Selects th e normal sou nd mode. z Music : Emphasizes mus ic over voices. z Movie : Provides the best so und for[...]

118 Sound Adjustment 5 5 Sound Adjustment 5.2 Sound Effect MENU [] Sound Sound Effect ENTER [ ] z If Speaker Select is set to External , Sound Effect is disabled. z Available only when Sound Mode is set to Standar d . z SRS TruSurround HD ( Off / On ) This funct ion provides a virtual 5.1 c hannel surr ound sou nd experience through a pair of sp ea[...]

119 Sound Adjustment 5 5 Sound Adjustment 5.3 Broadcast Audio Options MENU [] Sound Broadcast Audio Options ENTER [ ] z Preferred Langu age (digital channels only) Use the up and down arrow keys to select a languag e, and then press [ ]. Digital-TV broadc asts can simultan eously transmit many audio tracks (for example, simultan eous translations o[...]

120 Sound Adjustment 5 5 Sound Adjustment 5.4 Speaker Settings MENU [] Sound Speaker Settings ENTER [ ] z Speaker Select ( External / Internal ) If you are listen ing to the s ound track o f a broadc ast or movie t hrough an external re ceiver, you may hear a sound e cho caused by the differe nce in deco ding speed be tween the T V’s speakers and[...]

121 6 Media 6 Media 6.1 Favorites MENU [] Media Favorites ENTER [ ] View all of your favorite ch annels. Your favorite cha nnels are organized in up to five g roups ( Favorites 1 - 5 ). If you wa nt to change from one favorite g roup to an other, follo w these step s. 1 Move the cur sor to the group nam e displayed on the top o f the scree n, and t[...]

122 Media 6 6 Media 6.1.1 Functions on the Favorites Screen To access the func tions listed be low, use the arro w buttons to m ove the cursor to the icon of your ch oice on the top right corn er of the s creen, and t hen press [ ]. z View Mod e : Toggles betwee n the Text view and Thum bnail view of your favorite cha nnels. Thumbnail view d isplay[...]

123 Media 6 6 Media 6.2 Channel MENU [] Media Channel ENTER [ ] Using the Channel function, you can add channe ls, delete Added cha nnels, set Favo rite channe ls, use the program guide for digital bro adcasts and ch ange betwe en the All Channels and Added Ch. screen . You can also ch ange the a ntenna or channel setting s by selecting the icon s [...]

124 Media 6 6 Media Using Edit Mode to Delete a Channel from the Channel List 1 Select the Edit Mode icon on the upper right of you r screen, and then pr ess the [ ] button. 2 P r e s s t h e /// b u t t o n s t o s e l e c t a c h a n n e l , a n d t h e n p r e s s [ ] . A c h e c k a p p e a r s t o t h e l e f t of the channel. z You can select[...]

125 Media 6 6 Media z Delete only appears if you have selected an added channel on the Added Ch. or All Channels list. z You can also delete a channel on the All Channels list. Added channels are bright. D eleted channels are dim. To delete an Added channel on the All Channels list, select a bright channel, press the TOOLS button, select Delete , p[...]

126 Media 6 6 Media 6.2.2 Antenna MENU [] Media Channel Antenna ENTER [ ] Your TV memo rizes channels a nd adds the memorized channels to t he Channel . Before your TV can memorize chann els, you must s pecify the signal sou rce, either Air or Cable . If you select ca ble, when you start Auto Program , you must al so specify the cable system type, [...]

127 Media 6 6 Media 6.2.4 Clear Scrambled Channel MENU [] Media Channel Clear Scrambled Channel ENTER [ ] This function filters out scra mbled channels af ter Auto Program is compl eted. This process may take up to 20~30 minutes. How to Stop the Clear Scrambled Channels func tion 1 Press the [ ] button to select Stop . 2 Press the [ ] button to sel[...]

128 Media 6 6 Media 6.3 MagicInfo Lite MENU [] Media MagicI nfo Lite ENTER [ ] Press the MagicInfo Lite button on the remote contro l. MagicInfo Li te Player allo ws you to play conten t (image, vid eo, docume nt files) at a desired time . You can play conte nt saved in in ternal mem ory or USB memory. You can als o play content via MagicI nfo Lite[...]

129 Media 6 6 Media Supported Video Subitle Formats (for language subtiles, etc.) Supported Video Formats Name File extension Format MPEG-4 time-based text .ttxt XML SAMI smi HTML SubRip .srt string-base d SubViewer .sub string-based Micro DVD .sub or .tx t string-based File Extension Cont ainer Video Codec Resolution Frame rate (fps) Bit rate (Mbp[...]

130 Media 6 6 Media z Video content will not play, or not play correctly, if there is an error in the content or the container. z Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. z If the Index Table is in error, the Seek (Jump) function is not supported. z You [...]

131 Media 6 6 Media Using the Play Continuously Function (Resume Play) If you exit a mo vie when it is p laying, you can play the m ovie later fr om the point where you stopped it. The Resume function does not support multiple users. (It will only memorize the point where the most recent user stopped playing.) 1 Select the movie file you stoppe d a[...]

132 Media 6 6 Media 6.5 Photos MENU [] Media Photos ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 When a USB device is connec ted to the product, the Connect ed Device scree n appears. Select a conn ected d[...]

133 Media 6 6 Media 6.6 Music MENU [] Media Music ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 When a USB device is connec ted to the product, the Connect ed Device screen appears. Selec t a connected devi[...]

134 Media 6 6 Media Playing My Playlist Select the My Playlist fol der and it will play au tomatically. Press the or button to play a diff erent music file within th e play list. To delete a file from My Playlist , select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ]. The file will be de[...]

135 Media 6 6 Media 6.7 Videos / Photos / Music - Additional Functions 6.7.1 Sorting the file lists To sort files in the file lists, select the ( Sorti ng ) icon in the top right of the screen by using the / / / button. Then, press the [ ] button. The checks below indicate which media the sort criteria apply to. Sort Criteria Operation Videos Photo[...]

136 Media 6 6 Media 6.7.2 Videos / Photos / Music Play Option menu When playing video or phot o files, you can press t he TOOLS button to display an Opti ons menu. Below are a se ries of tables listing the optio ns available an d the me dia each optio n applies to. Option Name Operations Videos Photos Music List Return to the file list. Play / Paus[...]

137 Media 6 6 Media z Pressing the INFO button while a device name is selected will display information about the selected device. z Pressing the INFO button while a file is selected w ill display information about the selected file. Start Slide Show / Stop Slide Show You can start or stop a slide sho w. Alternatively, use the or button on the remo[...]

138 Media 6 6 Media 6.8 Source MENU [] Media Source ENTER [ ] Source allows you to select a variety of sources an d change sour ce device names. 6.8.1 Source You can display the screen of a source device connec ted to the p roduct. Select a source fro m Source List to display the screen of the selected source. The input source can also be changed b[...]

139 Media 6 6 Media 6.8.2 Edit Name MENU [] Media Source TOOLS Edit Name ENTER [ ] You can rena me a conn ected sou rce device. z Sometimes the scr een will not d isplay properly unless the nam e of a source d evice is specified in Edit Name . In addit ion, it is be st to rename the source d evice in Ed it Name to obtain optimal pictu re quality. T[...]

140 7 Network 7 Network 7.1 Network Setting 7.1.1 Connecting to a Wired Network There are t hree ways t o attach your product to your LAN u sing cable. z You can at tach your pro duct to your L AN by connecti ng the LAN port on the back of your product to an external mod em using a LAN cable. See the diagram below. z You can at tach your pro duct t[...]

141 Network 7 7 Network access the Inte rnet so you do not h ave to enter them ma nually. Most hom e networ ks are Dynamic Networks. Some networks requ ire a Static IP address. If your network requir es a Static IP address, you must enter the IP address, su bnet mask, g ateway, and DNS values man ually on your p roduct Cable Setup Screen w hen you [...]

142 Network 7 7 Network Automatic Network Settings Use the Automatic Network Se ttings when connecti ng your product to a network th at supports DHCP. To set up yo ur product cable netw ork connectio n automa tically, follow these steps. How to set up automat ically 1 Go to the Network Settings screen. 2 Select Wired , press [ ], and then press [ ][...]

143 Network 7 7 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 When done en tering the IP Address , press [ ]. 10 Press the down arrow key to go to th e Subnet Mask fields, a nd then press [ ]. 11 Repeat the same entry[...]

144 Network 7 7 Network 7.1.3 Connecting to a Wireless Network To connect yo ur product to your network wir eless, you need a wir eless router or mo dem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below. Samsung’s Wire less LAN adapter is sold sep[...]

145 Network 7 7 Network  WPS (PBC)  One Foot Connection z The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable ot her than the cable supplied with the product. 7.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an op tional s[...]

146 Network 7 7 Network Manual Network Setup Use the Manual Network Settings when con necting your prod uct to a network that re quires a Static IP address or if th e automatic co nnection process has failed. Getting the Netw ork Connect ion Values To view the Ne twork connectio n values on m ost Windows comput ers, follow these steps. 1 Right clic[...]

147 Network 7 7 Network 13 Repeat the entry p rocess for each field in the IP Address . If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time. 14 When done en tering the IP Address , press [ ]. 15 Press the button t o go to the Subnet Mask fields, an[...]

148 Network 7 7 Network 7.1.6 One Foot Connection The On e Foot Conn ection fu nction lets you con nect your Samsun g product automatically to a Samsung wireless routers. If your wi reless router does not support One Foot Connection , you must connect using one of the other meth ods. You can check for equipment that supports One Foot Connection on [...]

149 Network 7 7 Network 7.1.7 Ad Hoc Network Setup You can conn ect to a mo bile device supp orting Ad-ho c connections without a w ireless route r or AP through the produ ct. How to set up using Ad hoc 1 Go to Network Settings screen. 2 Select Wireless (Genera l) , and press [ ], then p ress [ ] again. 3 Select Ad hoc . The message “ Ad hoc serv[...]

150 Network 7 7 Network 7.2 Network Status MENU [] Network Network Stat us ENTER [ ] You can chec k the curr ent networ k and Interne t status. The displayed ima ge may differ depend ing on the model. m Network Network Settings Network Status MagicInfo Lite Settings[...]

151 Network 7 7 Network 7.3 MagicInfo Lite Settings MENU [] Network MagicInfo Lite Settings ENTER [ ] 1 Server z Setting the Mag icInfo Lite Server IP  Enter the serv er IP addre ss and port n umber. Use 7 001 as th e port numb er. If unable to connect to the server using port number 7001, check with your server administrator to find the correct[...]

152 8 System 8 System 8.1 Plug & Play MENU [] System Plug & Play ENT ER [ ] When the product is initially powered on, a sequence of on-scr een prompts will assist in configuring basic settings. Press the [ ] button. Plug & Play is available only when the In put Source is set to TV . 1 Selecting a language Press the or button, th en pres[...]

153 System 8 8 System 8.2 Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 8.2.1 Configuring settin gs for Multi Control z MDC Connection Select a method to connect to MDC to receive the MDC sign al.  RS232C MDC Communicate with MDC via the RS232C-stereo cabl e.  RJ45 MDC Communicate with MDC via t[...]

154 System 8 8 System 8.3 Time MENU [] System Ti me ENTER [ ] You can configu re Clock Set or Sleep Timer . You can also set the product to automatica lly turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the cloc k to use the v arious vari ous timer f eatures of the product . Changing the Setting for Clock z Clock Mode S[...]

155 System 8 8 System 8.3.2 Sleep Timer Automatica lly shuts off the prod uct after a preset period of time. ( Off , 30 min , 60 min , 90 min , 120 min , 150 min and 180 min ). Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer , select Off . 8.3.3 On Timer Set On Timer so that you r product turns on a [...]

156 System 8 8 System 8.3.4 Off Timer You can set up three sep arate Off Timer configurations. ( Off Timer 1 , Off Timer 2 , Off Timer 3 ) You must set the clock before you can use Off Timer . z Setup : Select Off , Once , Everyday , Mon~F ri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want Off Timer to turn o[...]

157 System 8 8 System 8.4 Menu Language MENU [] System Menu Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 8.5 Eco Solution MENU [] System Eco Solution ENTER [ ] 8.5.1 Energy Saving Save power with th e Energy Saving [...]

158 System 8 8 System 8.5.2 Eco Sensor (Off / On) To enhance your power sav ings, the pictur e settings will aut omatically adapt t o the light in th e room. If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off . z Min. Backlight : When Eco sensor is On , you can manually adjust the minimum scree n brightness. If Eco Sensor is[...]

159 System 8 8 System 8.6 Caption MENU [] System Caption ENTER [ ] (On-Screen Text Messages) 8.6.1 Caption You can switch the capt ion function on or off. If captions are not available, th ey will not be displayed on the screen . z Off / On The Caption feature does not work with devices connected to the product through the Component , HDMI or PC in[...]

160 System 8 8 System 8.6.3 Digital Caption Options (digital chan nels only) Adjusts th e each optio n. When done , select Close . z Size : Options inc lude Default, Small, Sta ndard and Large. The d efault is Stand ard. z Font Styl e : Options in clude Default an d Styles 0 to 7. The default is Style 0. z Foreground Color : You can change t he col[...]

161 System 8 8 System 8.7 Security MENU [] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". Th e PIN screen closes an d the Security menu ap pears. 8.7.1 Safety Lock (Off / On) It sets safe lock function. All the menus a nd buttons of t he product and [...]

162 System 8 8 System 8.7.3 Program Rating Lock (Off / On) When turn ed on, the Program Rati ng Lock feature ca n automatica lly block program s that you deem inappropriate for your ch ildren. You must enter a PIN (pe rsonal identification number) b efore you c an set or change an y of the Program Rating Loc k restrictions. z Program Rating Lock is[...]

163 System 8 8 System z Canadian E nglish Ra ting : You can block TV programs b ased on th eir Anglophone Canadian r ating. Canadian English Rating displays a column with locks and the following r atings categories. C : Programmin g intended fo r children under ag e 8. / C8+ : Programming gene rally considered acceptable for children 8 years and ov[...]

164 System 8 8 System 8.7.4 Change PIN The Change PIN screen will appear. Choose any 4 digi ts for your PIN and enter it in Enter New PIN . Re- enter the same 4 digits in Confirm N ew PIN . When the Confirm screen disappears, press the Close button. The product ha s memorized your new PIN. 8.8 PIP MENU [] System PIP ENTER [ ] z If you have set Doub[...]

165 System 8 8 System  Size ( , , , , ): Select a siz e for the sub picture.  Position ( , , , ): Select a position for the sub-pic ture. In Double ( , , ) mode, you cannot select Position .  Sound Select ( Main / Sub ): You ca n choose to listen to the sound from th e Main pictur e or the Sub pictur e. 8.9 Auto Protection Time MENU [ Syst[...]

166 System 8 8 System 8.10 Screen Burn Protection MENU [] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn preven tion technolog y. Pixel Shift moves th e picture slightly on the screen. The Pixel Shift T ime setting allows you to program th e time betwee n movement[...]

167 System 8 8 System 8.10.2 Timer You can set th e timer for Screen Burn Protection . If you start the operation to erase any residual imag e, the oper ation will be performed for the set period of time and then a utomatically finish. z Mode : You can chan ge the Safet y Screen Type. z Period : Use this functio n to set the e xecution period for e[...]

168 System 8 8 System 8.11 Video Wall MENU [] System Vide o Wall ENT ER [ ] Customize the layout of mult iple displays th at are co nnected t o form a vide o wall. In ad dition, disp lay part of a whole pic ture or r epeat the sam e picture on each o f the connec ted mult iple displays. To display multiple imag es, refer to MDC Help or the Magic In[...]

169 System 8 8 System 8.11.2 Format Select a format to display im ages on multiple displays. z Full : Display images in full screen. z Natural : Display images at the original res olution witho ut enlarg ing or redu cing. The Format option is only enabled when Video Wall is set to On . 8.11.3 Horizontal This function auto matically divides t he scr[...]

170 System 8 8 System 8.11.5 Screen Position You can custo mize the arra ngement of s plit screens b y moving dis plays identifie d with a num ber using the Screen Position function. Select Screen Position to display t he arrangemen t of displays (identified with a number) spe cified according to t he Horizontal or Ve rtical setting s. To customize[...]

171 System 8 8 System 8.12 Source AutoSwitch Settings MENU [] System Source AutoSwitch Settings ENTER [ ] Turning on the di splay with Source AutoSwitch On , and the previous video source selection is not active, the display will automatica lly search th e different video input so urces for active video. z Source AutoSwitch When the Source AutoSwit[...]

172 System 8 8 System 8.13 General MENU [] System General ENTER [ ] 8.13.1 Max. Power Saving Turns off the p roduct to re duce powe r consumption after the PC h as been left id le for a specified period of time. Available only PC mode. 8.13.2 Game Mode When connec ting to a gam e console s uch as PlaySt ation™ or Xbox™, you c an enjoy a m ore r[...]

173 System 8 8 System 8.13.3 BD Wise Provides the optim al picture qu ality for Samsung DVD, Blu-ray and Home Theater products whic h support BD Wise . When BD Wise is turned On , the picture m ode is aut omatically chang ed to the optimal resolution. Available when you connect Samsung products tha t support BD Wise through an HDMI cable to the pro[...]

174 System 8 8 System 8.13.8 Power On Adjustment You can set the warm -up time for the scr een to turn on after th e power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.13.9 Temperature Control This function d etects the int ernal temp erature of th e product. Yo u can spe[...]

175 System 8 8 System 8.14 Anynet+ (HDMI-CEC) MENU [] System Anynet+ (HDMI-CEC) ENTER [ ] 8.14.1 Anynet+ (HDMI-CEC) What is Anynet+? Anynet+ is a function that enable s you to control all con nected Samsung devices that supp ort Anynet+ with your Samsung product rem ote. The Anynet+ system can be used only w ith Samsung devices that have the Anynet[...]

176 System 8 8 System Anynet+ Menu The Anynet+ me nu chang es dependin g on the typ e and stat us of the Anynet + devices conne cted to the product. 8.14.2 Auto Turn Off (No / Yes) Setting an Anynet+ Device to t urn Off automa tically when the product is t urned off. z If Aut o Turn Off is set to Yes , running external devices will turn off at the [...]

177 System 8 8 System z If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List . 8.14.3 Receiver You can listen to sound through a Receiver (i.e. Home Theater) instead of the produ ct Speaker. To [...]

178 System 8 8 System 8.15 DivX® Video On Demand MENU [] System DivX® Video On Demand ENTER [ ] Shows the reg istration code authorized for the pro duct. If you connect to the DivX web site and r egister using that co de, you can d ownload t he VOD registr ation file. For more information about DivX® VOD, visit “http://vod.divx.com”. The mes[...]

179 System 8 8 System 8.16 Network Remote Control MENU [] System Network Remote Control ENTER [ ] Turn on/off or give perm ission to Samsun g mobile p hone devices t o connect wit h and contr ol the product. You must have a Samsung Mobile phone/devic e which support s Wireless Remote Control. For mo re details, refe r to each device’s manu al. 8.[...]

180 9 Support 9 Support 9.1 Software Upgrade MENU [] Support Software Upgrade ENTER [ ] The Software Upgrade menu lets you upg rade your TV’s so ftware to the lat est version. z Current Version : This is the software versio n already installed in the TV. Be careful not to turn off the power until the upgrade is complet e. The TV will turn off and[...]

181 Support 9 9 Support 9.1.2 Alternative Software z Alternative Softw are The Alte rnative S oftware o ption lets you u pgrade using a file the TV down loaded earlier , but you decided not to install immediately, o r a file downloa ded by the TV in Standby Mode . To upgrade By Alt ernative Softwar e , follow these steps. 1 If upgrade software has [...]

182 10 MagicInfo Lite 10 MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player 10.1.1 Video / Audio [Read before usin g MagicInfo Lite Player ] z Supported USB-device file systems include FAT16 and FAT32 . (NTFS is not supported.) z A file with a vertical and horizontal r esolution larger t han the maximum r esolution cannot be pla[...]

183 MagicInfo Lite 10 10 MagicInfo Lite *.mp4 MP4 H . 2 6 4 B P / M P / HP 1920 x 1080 6 ~ 30 25 MP3 / ADPCM / AAC MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 *.3gp 3GPP H . 2 6 4 B P / M P / HP 1920 x 1080 6 ~ 30 25 ADPCM / AAC / HE-AAC MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 *.vro VRO VOB MPEG1 352 x 288 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920 x 1080 24[...]

184 MagicInfo Lite 10 10 MagicInfo Lite Audio z Audio content witho ut video is not supported . (Only mp3 files a re supported as b ackground music for image/PPT slideshows. Th is feature is available only when using the netw ork schedule m enu.) z Audio content with a Bit ra te or Frame rate large r than the rate specified in the table above can c[...]

185 MagicInfo Lite 10 10 MagicInfo Lite Power Point z Compatible docume nt file format s  Extension : ppt, pptx  Version : Office 97 ~ Offic e 2007 z Functions not supporte d  Animation effect  3D shapes (which wil l be displayed in 2D)  Header and footer (som e subitems are not su pported)  Word Art  Align (A group a lignment [...]

186 MagicInfo Lite 10 10 MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server Network setup To run Ma gicInfo Li te , connect to a network. Refer to 140 page for details about the Networ k Settings menu. Server setup Go to MENU Network MagicI nfo Lite Settings Server . Next, enter the server information. (E.g.: http ://192.168.0.10:70[...]

187 MagicInfo Lite 10 10 MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU [] Media MagicI nfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the ser ver is connected (approval) in t he MagicInfo Lite menu screen. T o view whether the server is conne cted when a network sc hedule is runnin g, press IN F[...]

188 MagicInfo Lite 10 10 MagicInfo Lite 3 Select Device fr om the top menu bar. 4 Select Lite Device from the menus on the left. 5 Select View Unapproved Lite De vice from the sub -menus o f Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network sched[...]

189 MagicInfo Lite 10 10 MagicInfo Lite 7 Enter the in formation re quired to appr ove the device. z Device Na me : Enter the device na me. z Device Model Name : Select your device model. z Device Gr oup : Sele ct to specify the g roup. z Location : Enter the curren t location of t he device. 8 Select the View All Lite Device m enu to ch eck that t[...]

190 MagicInfo Lite 10 10 MagicInfo Lite 10.2.4 Setting the current time A schedule m ay not ru n if the time set on the de vice is differen t from th e server's c urrent time. 1 Go to the tabs Device Time . 2 Select your de vice. 3 Select Clock Set , and sync the time with the ser ver. For further details on how to manage the time (scheduling,[...]

191 MagicInfo Lite 10 10 MagicInfo Lite 10.3 Local Schedule Run a schedule cr eated by Local Schedule Manager . Go to Local Schedule Manager Sele ct the co ntent you w ant to run This menu is disabled if no schedule was created by Local Schedule Manager . 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Run a schedule cr eated [...]

192 MagicInfo Lite 10 10 MagicInfo Lite 2 Select Create in the Local Schedule Manager scre en. 3 Select Time to set the tim e you wan t to play cont ent. 4 Select Contents to specify the content you want to pla y. 5 Select Save . Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete Run Info Close Create T ime Conten[...]

193 MagicInfo Lite 10 10 MagicInfo Lite 6 Select the memory space you w ant to save the content to. 7 Check that the schedule h as been ad ded to the Local Schedule Manager . Create T ime Conten T ime Conten 12:00 am ~ 02:00 pm Delete Save ancel Where do you want to save? Internal USB Cancel Local Schedule Manager Storage Internal Memory No Playing[...]

194 MagicInfo Lite 10 10 MagicInfo Lite 10.4.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to m odify. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Cl[...]

195 MagicInfo Lite 10 10 MagicInfo Lite 3 Select Edit . 4 Change the d etails of the local schedu le. Next, se lect Save . 10.4.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. Edit T ime Contents T ime Contents 12:00 am ~ 02:00 pm Menu1.jpg --:-- am ~ [...]

196 MagicInfo Lite 10 10 MagicInfo Lite 2 Select the local schedule you want to d elete. 3 Select Delete . Local Schedule Manager Storage Internal Memory No Playing Schedule 201 10101_1200.Isch Create Edit Delete Run Info Close Local Schedule Manager Storage Internal Memory Do you want to delete schedule? 201 Create Edit elete Run Info Close Ye s N[...]

197 MagicInfo Lite 10 10 MagicInfo Lite 10.4.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run. Next, se lect Run . Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay [...]

198 MagicInfo Lite 10 10 MagicInfo Lite 10.4.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select Stop . Network Schedule Local Schedule ・ Local Schedule[...]

199 MagicInfo Lite 10 10 MagicInfo Lite 10.4.6 Viewing the detail s of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the loca l schedule you want to view the detail s of. 3 The details of the sc hedule will be disp layed. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Inte[...]

200 MagicInfo Lite 10 10 MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content 1 Select Contents Manager in the MagicInfo Lite menu scre en. 2 Select the cont ent you want to copy. z If content under Internal Memory is selec ted: You ca n copy the content und er Internal Memory to USB memory . z If content under USB is select ed: You can c op[...]

201 MagicInfo Lite 10 10 MagicInfo Lite 10.5.2 Deleting content 1 Select Contents Manager in the MagicInfo Lite menu scre en. 2 Select the conten t you want to delete. z Content un der Internal Memory and US B memory can be deleted at the sam e time. 3 Select Delete . Network Schedule Local Schedule · Local Schedule Manager Contents Manager Intern[...]

202 MagicInfo Lite 10 10 MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite menu screen. z Play content, which has been cop ied to Internal Memory , in alphab etical order. 10.7 USB AutoPlay 10.7.1 Running Internal Au[...]

203 MagicInfo Lite 10 10 MagicInfo Lite z USB AutoPlay wi ll automatically run if US B memory is connect ed when Network Sc hedule or Local Schedule is running. 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running Press the INFO button on the remote control. 1 Software Versio n : Displays the software versio n of a[...]

204 MagicInfo Lite 10 10 MagicInfo Lite 7 Schedule Download : Displays the progress o f a network sc hedule bein g downloa ded from the server 10.8.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control. You can chan ge the Picture Mode or Sound Mode setting or safely remove a USB device ( Safely Remov[...]

205 11 Troubleshooting Guide 11 Troubleshooting Guide 11.1 Requirements Before Co ntacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is op erating norm ally by using[...]

206 Troubleshooting Guide 11 11 Troubleshooting Guide 11.1.3 Check the followings. Installation issue (PC mode ) The screen keeps swit ching on and off. Check the cable connection between the product and PC, and e nsure the con nection is secure. ("2.2 Conn ecting and Using a PC") Blank spaces are fou n d at the top and bottom of the scre[...]

207 Troubleshooting Guide 11 11 Troubleshooting Guide The screen is not clear. The screen is blurry. Adjust Coarse and Fine . Remove any accessories (vid eo extension cable, etc) an d try again . Set the resolution and frequency to the recommended level. The screen ap pears unst able and shaky . Check that the resolution and frequ ency of the PC an[...]

208 Troubleshooting Guide 11 11 Troubleshooting Guide Remote control issue The remote con trol does not w ork. Make su re that the b atteries are c orrectly in place (+/ -). Check if the ba tteries are flat. Check for po wer failure. Make sure th at the pow er cord is connected . Check for any special lighting or neon sign s switched on in the vici[...]

209 Troubleshooting Guide 11 11 Troubleshooting Guide 11.2 Q & A Question Answ er How can I change the frequency? Set the frequ ency on you r graphics c ard. z "Windows XP": Go to Control Panel Appearan ce and Themes Display Settings Advanced Monitor and adjust the fr equency in Monitor Settings . z "Windows ME/ 2000": Go to[...]

210 Troubleshooting Guide 11 11 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution? z "Windows XP": Go to Control Panel Appearanc e and Themes Display Settings and adjust the reso lution. z "Windows ME/2000" : Go to Control Panel Di[...]

211 12 Specifications 12 Specifications 12.1 General Model Name ME32B ME40B Panel Size 32 inches (80 cm) 40 inches (101 cm) Display area 698.4 mm (H) x 392.85 mm (V) 27.5 inches (H) x 15.5 inches (V) 885.6 mm (H) x 498.15 mm (V) 34.9 inches (H) x 19.6 inches (V) Dimensions (W x H x D) / Weight 733.7 x 430.2 x 29.9 mm / 6.5 kg 28.9 x 16.9 x 1.2 inch[...]

212 Specifications 12 12 Specifications Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if de sired. Due to the[...]

213 Specifications 12 12 Specifications 12.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching off the scree n and changing the co lor of the pow er LED if the prod uct is not used for a specified period of tim e. The power is not turned off in powe r-saving mode. To swit ch the screen back on , press [...]

214 Specifications 12 12 Specifications 12.3 Preset Timing Modes z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the opti[...]

215 Specifications 12 12 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. Vertical Frequency The product displays a single image m[...]

216 Specifications 12 12 Specifications 12.4 License TheaterSound HD, SRS and symbol are tradem arks of SRS Lab s, Inc. TheaterSound HD technology is incorporated under license form SRS La b, Inc. Manufactur ed under license from Dolby Laboratories. Dolby and the double- D symbol are trademarks of Dolb y Laboratories . Manufactured un der license u[...]

217 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsu ng.com CANADA 1-800-SAMSUNG (7 26-7864) h ttp://www.sam sung.com/ca http://www. samsung.co m/ca_fr (French) MEXICO 01-800-[...]

218 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc . z If a service tech nician gives inst[...]

219 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality z To enjoy the op timum picture quality, go to Control Panel on your PC and ad just the resolu tion and refresh rate as follows. Th e picture quality of TF T-LEDs may degr ade if the optimum resolution is not selected.  Resolution: 1920 X 1080[...]

220 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn -in should not occur wh en the LCD pa nel is ope rating nor mally. Norma l operation refers to a continuously chan ging video patter n. If the LCD pane l displays a fixed patter n for an exten ded period of time (more than 1 2 hours), a slight volt[...]

221 Appendix Appendix z Powering Off, Screen Save r and Power Saving Mode  Power off th e product fo r 2 hours a fter using it f or 12 hour s.  Go to Display Prop erties > Power Su pply on your PC a nd set the pr oduct to pow er off as required.  Using a s creen saver is r ecommen ded. It is best to use a single-color or moving-image sc[...]

222 Appendix Appendix Terminology Dot Pitch The product and scree n consist of red, gree n and blue dots. A short er distance between t he dots produces a hig her resolutio n. Dot pitch ref ers to the distan ce between the shortest di stance betw een dots of the same color. Dot pi tch is measured in millimeters. Vertical Frequency The product disp [...]

223 Appendix Appendix Multiple Display Control (MDC) MDC (Multiple Disp lay Control) is an ap plication that allows multiple displ ay devices to be contro lled simultaneously using a PC. Commun ication between a PC and m onitor takes place using RS232C (serial data transmissio n) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a C[...]

Index 224 Index A Antenna 64 Anynet+(HDMI-CEC) 175 B Batteries 30 C Caption 159 Change PIN 164 Clock Mode 154 Contact SAMSUNG WORLDWIDE 217 Custom settings screen 106 E Eco Solution 157 Edit Name 139 Energy Saving 157 F Favorites 121 G Game Mode 172 I Items sold separately 24 M MagicInfo Lit e 128 MagicInfo Lite Settings 151 MDC Program Installatio[...]

Index Index 225 W What is MDC? 72 Wired Network 14 0 WPS(PBC) 147[...]