Samsung SDZ-300 manuale d’uso

P/No. : Z6806-0709-01A VAN 06. 05 www.samsungtechwin.com www.samsungcctv.com • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-703, Korea TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey [...]

This installation should be made by a qualified service person and should conform to all local codes. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute [...]

W arning The camera requires regular maintenance. Contact an authorized technician for maintenance and/or servicing. Do not continue to use if malfunctioning. Prolonged use of the camera in abnormal operating conditions (produces smoke, overheats, etc.) may result in a fire. Do not Install the camera on a surface that can not support it. Installati[...]

Top Bottom Back 8 Connecting To Monitor Connecting To Power Connecting To Connection P recautions 10 C omponents and Accessories 11 14 15 16 12 11 13 O verview Menu Configuration Menu Setup • CAM TITLE • WHITE BALANCE • BACKLIGHT • MOTION DETECTION • FOCUS • EXPOSURE • SPECIAL • RESET • EXIT 18 19 18 20 23 24 25 26 30 35 41 41 O p[...]

Do not install under extreme temperature conditions. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install in high humidity environment. May lower image quality. Do not install under unstable lighting conditions. Severe lighting changes or flickering may h[...]

1. 30x Zoom Color Camera SDZ-300 2. Instruction Manual 3. 6-Pin Connection Cable 4. Remote Controller (Optional) Top Tripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera. Components and Accessories Overview COLOR CCD CAMERA User’s Manual 11 COLOR CCD CAMERA User’s Manual 10[...]

Bottom Overview Back Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right. Key Buttons · Following buttons control zoom, focus, and auto focus functions. WIDE button : To widen the view. (ZOOM OUT) TELE button : To close in on a far object. (ZOOM IN) F[...]

Power Input Terminal Power supply terminal (DC12V±10%). Power LED Illuminates when power is supplied. Video Output Jack Used to connect an external video monitor in jack. Communication Control Connector Used to connect the Remote Controller (Optional). Includes external 'SYNC' signal input pin, which is used for the line lock function. I[...]

COLOR CCD CAMERA User’s Manual 17 COLOR CCD CAMERA User’s Manual 16 Connection Connecting to connection External Control Connector Communication Control Connector Connector Signal Level I / O Function * MD (Motion Detection) Output Signal Level (less than 10mA) * When using the MD function, the 'GND' should be connected to the frame g[...]

COLOR CCD CAMERA User’s Manual 19 COLOR CCD CAMERA User’s Manual 18 Menu Configuration Operating Y our Camera Menu Setup Use the six buttons on back of the camera. UP button SET button LEFT button AF button DOWN button RIGHT button 1. Press the SET button to access the main setup mode. • Main setup menu is displayed on the monitor screen. 2. [...]

Operating Y our Camera 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' and press the SET button. Use this feature to designate a name for the camera, which will display on the monitor screen. 1. Press the SET button to display the main setup menu and move t[...]

Operating Y our Camera 5. Select on screen position of the CAM TITLE. Move the cursor to 'POS' and press SET button. The CAM TITLE is displayed on the top-left of the monitor screen. (Default position) Select the position by using the 4-directional buttons, then press the SET button to confirm the position. 6. When completed, move the cur[...]

COLOR CCD CAMERA User’s Manual 25 COLOR CCD CAMERA User’s Manual 24 Operating Y our Camera • Proper White Balance may not be obtained under the following conditions. When the scene contains mostly high color temperature object, such as a blue sky or sunset. When the scene is dim. If your camera directly faces a fluorescent lamp or is used in [...]

Operating Y our Camera FOCUS 1. Press the SET button to access the main setup manu and then position the indicator over FOCUS using the UP or DOWN button. 2. Press the SET button. MODE: You can select the most suitable zoom mode. Move the arrow indicator to ‘MODE’ using UP or DOWN button. •AUTO : Select AUTO and press the SET button to confir[...]

Operating Y our Camera •FAST: To move zoom fast. •SLOW: To move zoom slowly. D-ZOOM: Configure magnification limit from x2~x10 using this feature. Position the indicator over 'D-ZOOM' using the UP or DOWN button. Set 'D-ZOOM' to 'ON' and press the SET button to confirm. DISP ZOOM MAG: Use this feature to display th[...]

COLOR CCD CAMERA User’s Manual 31 COLOR CCD CAMERA User’s Manual 30 Operating Y our Camera EXPOSURE 1. Press the SET button to access the main setup menu and then position the indicator over 'EXPOSURE' using the UP or DOWN button. 2. Press the SET button to confirm. BRIGHTNESS: Use this feature to adjust image brightness. Position the[...]

Operating Y our Camera 2. If you choose ‘MANUAL’, select the optimal shutter speed. · In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL). * 'Sens-Up' mode can be configured manually (2x to 128x). · Verify changes made to the shutter speed by referenc[...]

Operating Y our Camera • Changing 'AGC' setting from LOW to HIGH results in greater sensitivity, as well as on screen noise. • Setting 'AGC' to OFF locks 'SSNR' configuration. Notes SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over 'SENS-UP&ap[...]

Operating Y our Camera • PRESET NO : Up to eight different preset configurations are supported. • PRESET MODE : Configure initial settings under FOCUS, EXPOSURE, etc. COLOR CCD CAMERA User’s Manual 37 COLOR CCD CAMERA User’s Manual 36 USER PRESET SETUP PRESET NO. NO. 1 PRESET MODE ON PRESET SAVE PRESET CLEAR END PRESET DEFINED • PRESET SA[...]

Operating Y our Camera COLOR CCD CAMERA User’s Manual 39 COLOR CCD CAMERA User’s Manual 38 • GROUP SEL : Choose up to eight groups. Each group can consist of four mask areas. • MASK COLOR : Adjust desired mask color level. • AREA SEL : Configure eight mask areas. • AREA MODE : Mask area display. •T O P : To move the mask area up. • [...]

Operating Y our Camera • For NTSC models, the line-lock mode can be used if the external SYNC signal frequency is at 60Hz. • For PAL models, the line-lock mode can be used if the external SYNC signal frequency is at 50Hz. Notes COLOR CCD CAMERA User’s Manual 41 COLOR CCD CAMERA User’s Manual 40 COMM ADJ: Use this feature to select communica[...]

Tr oubleshooting COLOR CCD CAMERA User’s Manual 43 COLOR CCD CAMERA User’s Manual 42 Problem Uneven colors Flickering Can't select LL mode LL is not function properly. Solution • Adjust and configure WHITE BAL. • The camera may be facing the sun or a fluorescent light. Adjust the position of the camera. • The camera may be connected [...]

Specifications Input Voltage Input Current Power Consumption Size Total Pixels Effective Pixels Optics Min. Focus Distance D. ZOOM Angle Field of view Scanning System Synchronization Frequency Camera Title Camera ID Resolution Video Output S/N (Y signal) Min. Illumination Backlight Compensation Day & Night 250mA: Steady-state 416mA: Max (Zoom, [...]

STW Protocol Command Description COLOR CCD CAMERA User’s Manual 47 COLOR CCD CAMERA User’s Manual 46 Byte1 Byte2 Byte3 Byte4 ll Byte5 Byte 6 Byte7 Byte8 Byte9 Byte10 Byte11 Command Packet STX CAM ID HOST ADDR CAMMAND DATA3 DATA4 DATA5 DATA6 ETX CHECKSUM Return Packet STX CAM ID HOST ADDR CAMMAND DATA3 DATA4 DATA5 DATA6 ETX CHECKSUM Checksum CHE[...]

Function Save current user preset configuration information. Command Packet A0h CAM ID HOST ADDR 0003h P1 00h 00h 00h AFh CHECK SUM Return Packet A0h CAM ID HOST ADDR 0003h P1 00h 00h 00h AFh CHECK SUM Parameter P1: 00h = USER PRESET 1 01h = USER PRESET 2 02h = USER PRESET 3 03h = USER PRESET 4 04h = USER PRESET 5 05h = USER PRESET 6 06h = USER PRE[...]

Function Move OSD arrow to up. Command Packet A0h CAM ID HOST ADDR 0008h 00h 00h 00h 00h AFh CHECK SUM Return Packet A0h CAM ID HOST ADDR 0008h 00h 00h 00h 00h AFh CHECK SUM Function Move OSD arrow to down. Command Packet A0h CAM ID HOST ADDR 0010h 00h 00h 00h 00h AFh CHECK SUM Return Packet A0h CAM ID HOST ADDR 0010h 00h 00h 00h 00h AFh CHECK SUM [...]

DECLARA TION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SD[...]

MEMO MEMO[...]