Samsung SMC-210FN manuale d’uso

COLOR MONIT OR SMC-212FP/SMC-210FP SMC-152FP/SMC-150FP SMC-212FN/SMC-210FN SMC-152FN/SMC-150FN User Guide Mode d’emploi Bedienungsanleitung Manuale dell'utente Guía del usuario[...]

IMPOR T ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sourc[...]

Eng-3 Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equil[...]

Eng-4 IMPOR T ANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.) 1. Read Instructions : All the safety and operating instructions should be read [...]

Eng-5 8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung or sold with the monitor. Any mounting of the monitor should follow [...]

Eng-6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14. Overloading : Do not overload wall outlets and ext[...]

Eng-7 18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 19. Safety Check : Upon completion of any service or repairs to this[...]

Eng-8 Contents IMPORTANT SAFETY INSTRUCTIONS .................Eng-2 IMPORTANT SAFEGUARDS ................................... Eng-4 FCC information .......................................................... Eng-7 Front Panel Components and Controls ........................ Eng-9 • Using the Auto Mode ..........................................Eng-1[...]

Eng-9 Fr ont Panel Components and Controls SMC-212F SMC-152F POWER On/Off Switch If you press this switch, the monitor is turned on and the LED of selected input signal is lit. Auto/Manual/VCR Mode Selection Button If the Auto/Manual/VCR mode selection button is pressed, a RED indicator light will be displayed for Auto mode, a GREEN indicator light[...]

Eng-10 POWER On/Off Switch If you press this switch, the monitor is turned on and the LED of selected input signal is lit. VIDEO A/VIDEO B/VCR Mode Selection Button If the VIDEO A/VIDEO B/VCR mode selection button is pressed, a RED indicator light will be displayed for VIDEO A mode, a GREEN indicator light for VIDEO B mode and an ORANGE indicator l[...]

Eng-11 Using the Auto Mode The RED indicator light is lit when Auto Mode is selected. In the Auto mode, the camera and VCR input channels will automatically switch by following sequence: Camera 1 → Camera 2 → Camera 3 → Camera 4 → VCR, where the switching interval is set in the MENU option. (In the MENU option, auto-timer, 2 to 10 seconds) [...]

Eng-12 Using the Auto-Skip Mode When the Auto-skip options is set in the MENU settings, and no input signals are found for the channels 2, 4 and VCR, the Monitor will operate as follows: After 1 second After 1 second After 1 second (After scanning 5 channels) After 1 second Camera 2 Scanning No Input Signal Camera 3 Scanning Camera 4 Scanning VCR S[...]

Eng-13 Using the Manual Mode The GREEN indicator light is lit when Manual Mode is selected. This option allows the user to manually select either Camera OR VCR input channel accordingly as follows: CAMERA 1 Button If this button is pressed, the menu setting will be set to Camera 1. CAMERA 2 Button If this button is pressed, the menu setting will be[...]

Eng-14 Using the MENU button Press the MENU button for MENU settings. MENU Button - VOLUME If the MENU Button is pressed, all user controllable menus will be displayed in the following sequence: Contrast ➔ Brightness ➔ Sharpness ➔ Color ➔ Tint(NTSC) ➔ Auto Timer ➔ Auto Skip ➔ Camera OSD ➔ Language ➔ Preset To set each Menu setting[...]

Eng-15 Settings Range of Each Button Explanation To select a specific Contrast within the setting range. To select a specific Brightness within the setting range. To select a specific Sharpness within the setting range. To select a specific Color within the setting range. To select specific Tint within the setting range. Interval of Input Channel S[...]

Eng-16 Use the VOLUME Button to adjust Auto-Skip menu setting. • Select the Auto-Skip Menu in the MENU options. • Press the VOLUME Button to turn on and off the Auto-Skip setting. Use the VOLUME Button to adjust the preset MENU settings. • Select the Preset Menu in the MENU options. • Press the VOLUME Button to adjust default setting values[...]

Eng-17 Exit MENU • The Menu mode will exit automatically after 20 seconds of no user input. Adjusting VOLUME • In the MANUAL Mode, use the VOLUME button to adjust the volume of the selected channel. • Press the VOLUME button to decrease, or press the VOLUME button to increase the volume. • Monitor displays the volume as an adjustable signal[...]

Eng-18 Rear Panel Components and Contr ols CAMERA IN (1~4) Camera INPUT connector. Input connectors for up to 4 cameras MONITOR OUT Monitor OUTPUT connector. VCR IN VCR INPUT connector. Connect to the VCR. AUDIO IN (1~4) AUDIO INPUT connector. Select corresponding AUDIO input signals (1 – 4) AUDIO OUT AUDIO OUTPUT connector. (Not working under AU[...]

Eng-19 Connections CCD Camera 1 CCD Camera 2 CCD Camera 3 CCD Camera 4 TimeLaps VCR TimeLaps VCR[...]

Eng-20 Maintenance If the quality of the picture on the COLOR MONITOR is poor and cannot be improved, inspect all system connections and cable runs. Repairs should be performed by a qualified technician with adequate test equipment and facilities.[...]

Eng-21 Specifications SMC-152FP/SMC-150FP/SMC-152FN/SMC-150FN (NTSC/PAL) 15” diagonal, 0.6mm stripe pitch, 90° deflection 4 Channel Input/1 Channel Output, VCR INPUT 1.0Vp-p BNC jack 4 Channel Input/1 Channel output, VCR Input, RCA jack MENU (Contrast, Brightness, Tint (NTSC), Color, Sharpness, Auto Timer, Auto Skip, Camera OSD, Preset) Control [...]

Eng-22 Specifications SMC-212FP/SMC-210FP/SMC-212FN/SMC-210FN (NTSC/PAL) 21” diagonal, 0.75mm stripe pitch, 90° deflection 4 Channel Input/1 Channel Output, VCR INPUT 1.0Vp-p BNC jack 4 Channel Input/1 Channel output, VCR Input, RCA jack MENU (Contrast, Brightness, Tint (NTSC), Color, Sharpness, Auto Timer, Auto Skip, Camera OSD, Preset) Control[...]

Part No.: AA68-03174A-00 Printed in Korea[...]