Samsung SND-1080 manuale d’uso

NETWORK CAMERA User Manual SNB-1001/ SND-1080/SNV-1080[...]

Copyright ©2 011 Sam sun g Techw in Co ., Ltd . Al l rig ht s re ser ve d. Tr a de m a r k is the r egist ered l ogo of S amsun g Techwin C o., Ltd. The n ame of th is pro duct is t he reg ister ed tra demar k of Sa msung Techw in Co., L td. Ot her tra demar ks me ntion ed in thi s manua l are the r egis tered t radem ark of t heir re spec tive c [...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the ap[...]

over view 6_ overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area.  Do not place this apparatus near conductive material.  Do not attempt to service this[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Features 9 Recomended PC Specifications 10 Recomended Micro SD/SDHC Memory Card Specifications 10 What’ s Included 12 At a Glance (SNB-1001) 16 At a Glance (SND-1080) 19 At a Glance (SNV -1080) INST ALLA TION & CONNECTION 21 21 Installation ( SND-1080 ) 23 I[...]

over view 8_ overview SETUP SCREEN 58 58 Setup 58 Audio & Video Setup 67 Network Setup 74 Event Setup 81 System Setup APPENDIX 86 86 Specification 91 Product Overview 94 T roubleshooting 96 Open Source Announcement 98 GPL/LGPL Software License WEB VIEWER 47 47 Connecting to the Camera 48 Login 49 Installing ActiveX 50 Installing Silverlight Run[...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Multi-Str eaming This network camera can display videos in differ ent resolutions and qualities simultaneously using differ ent CODECs. • W eb Browser -based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event occurs, the event-related v[...]

over view 10_ overview • Video Memory : 256MB or higher J  If the driver of the video graphic adapter is not installed properly or is not the latest version, the video may not be played properly .  For a multi-monitoring system involving at least 2 monitors, the playback performance can be deteriorated depending on the system. RECOMENDED MI[...]

English _11 ● OVERVIEW Appearance Item Name Quantity Description Model Name Cable for the testing monitor 1 Used to test the camera connection to a portable display device SNB-1001 SND-1080 SNV-1080 Iron Screw 3 Used for fixing to an iron plate SND-1080 SNV-1080 Alarm Cable 1 Used to connect to Alarm input SNB-1001 C Mount Adapter 1 Used to insta[...]

over view 12_ overview A T A GLANCE (SNB-1001) Front Side Item Description  Mounting Bracket Screw Hole Used to fix the camera on a mounting bracket.  The screw size : use this screw to fix the mounting bracket. 1/4" - 20UNC ( 20THREAD/1" ) L : 4.5mm±0.2mm (ISO Standard), or 0.197" (ASA Standard) b Auto Iris Lens Connector Use[...]

English _13 ● OVERVIEW Item Description c FBL Lever Adjust the FBL (Flange-Back Length) value according to the lens.  Auto Iris Lens (Optional) Installed on the lens adaptor. M  Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.  Mounting Bracket is not included. For more informatio[...]

over view 14_ overview Rear Side Item Description  Micro SD Memory Card Compartment Compartment for the Micro SD memory card. b Audio terminal AUDIO OUT Terminal for audio output. AUDIO IN Terminal for audio input. c Video Out Port Analog video output port. (for installation)  Reset Button Resets the camera settings to the default. Press and [...]

English _15 ● OVERVIEW Item Description  Power Port Used to plug the power cable.  Alarm Input Port Used to connect the alarm input signal.  Network Port Used to connect a PoE or LAN cable.[...]

over view 16_ overview A T A GLANCE (SND-1080) Appearance Item Description  Dome Cover Dome cover for the lens and unit protection. b Main unit Main unit includes the lens, switch board, PCB boards and screws. c Power Port Used to plug the power cable.  Alarm Input Port BROWN = Alarm IN Used to connect the alarm input sensor. BLACK = GND Used[...]

English _17 ● OVERVIEW Components Item Description  Reset Button Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. J If you reset the camera, the network settings will be adjusted so that DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to ch[...]

over view 18_ overview Item Description  ZOOM lever Turn the barrel left or right to adjust the zoom, and turn the knob clockwise to lock the zoom.  Lock Release To separate the bracket from the main unit for the installation or to separate the camera from an installed camera, push this release and turn the main unit in the marked direction o[...]

English _19 ● OVERVIEW A T A GLANCE (SNV -1080) Appearance Item Description  Dome Cover Dome cover for the lens and unit protection. b Main unit Main unit includes the lens, switch board, PCB boards and screws. c Power Port Used to plug the power cable.  Alarm Input Port BROWN = Alarm IN Used to connect the alarm input sensor. BLACK = GND U[...]

over view 20_ overview Components Item Description  Reset Button Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. J If you reset the camera, the network settings will be adjusted so that DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to chan[...]

English _21 ● INST ALLA TION & CONNECTION installation & connection INST ALLA TION ( SND-1080 ) Precautions befor e installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. • Stuck-in or peeled-off ca[...]

installation & connection 22_ installation & connection 2. Push the release lock out while turning the main unit in the < UNLOCK > direction to r emove the bracket. If this doesn’t work, use the hole on the bottom of the bracket to turn the bracket in the < LOCK > direction. 3. Use the provided scr ews (x3) to fix the bracket [...]

English _23 ● INST ALLA TION & CONNECTION INST ALLA TION ( SNV -1080 ) Precautions befor e installation Ensure you read out the following instructions before installing the camera: • Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. • Stuck-in or peeled-off cables can cause damage to the [...]

installation & connection 24_ installation & connection Adjusting the monitoring direction for the camera ( SND-1080/SNV -1080 ) ❖ Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Then, turning the camera to the left or right is referred to as “Panning”, while tilting[...]

English _25 ● INST ALLA TION & CONNECTION MOUNTING THE LENS (SNB-1001) Disconnect the power before proceeding. M  The C lens and CS lens are not included in the product package. Mounting the CS lens Turn the optional CS lens clockwise to insert it. Mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the[...]

installation & connection 26_ installation & connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.[...]

English _27 ● INST ALLA TION & CONNECTION INSERTING/REMOVING AN SD MEMOR Y CARD J  Disconnect the power cable from the camera before inserting the SD memory card. Inserting an SD Memory Card Push the SD memory card in the direction of the arrow shown in the diagram. J  Do not insert the SD memory card while it’ s upside down by force.[...]

installation & connection 28_ installation & connection Removing an SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. J  Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.  T o remove th[...]

English _29 ● INST ALLA TION & CONNECTION MEMOR Y CARD INFORMA TION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’ s suitable for you Your camera [...]

installation & connection 30_ installation & connection Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J  Be careful not to reverse the polarity when you connect the pow[...]

English _31 ● INST ALLA TION & CONNECTION Connecting to Audio Input/Output ALARM IN OUT IN AUDIO ACT LINK NETWORK DC12V Speaker Amp Microphone PC Amp Network Speaker Microphone Microphone Amp Amp Microphone Microphone Speaker[...]

installation & connection 32_ installation & connection 1. Connect the AUDIO IN port of the camera with the microphone dir ectly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker . 3. Check the specifications for audio input. • Audio Code[...]

English _33 ● INST ALLA TION & CONNECTION T o connect to the alarm input port (SND-1080/SNV -1080) Connect the alarm input signal to the cable input port. Port Description Port Description ARM-IN Alarm Input Sensor Port GND Earth-grounding Port T o connect the alarm input signal Connect one strand of each signal line (2-strand) of the sensors[...]

34_ network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess bar of the browser . M  A[...]

English _35 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet[...]

36_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Intern[...]

English _37 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

38_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description  Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either <[...]

English _39 ● NETWORK CONNECTION AND SETUP Item Description  URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed.  IPv4 Scans for cameras with the IPv4 setting.  IPv6 Scans for cameras with the IPv6 setting. Activated i[...]

40_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually . M  Y ou can configure the static IP settings only if the DHCP [...]

English _41 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera. • Gatew[...]

42_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_vX.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M  For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this f[...]

English _43 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Broadband Router , with cameras connected, is assigned an IP addr ess by the DHCP server - If connecting the camera directly to modem using the DHCP pr otocols - If IPs are assigned by the internal DHCP server[...]

44_ network connection and setup network connection and setup PORT RANGE FOR W ARD (POR T MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup menu of the Br oadba[...]

English _45 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J  If you don't set properly the TCP 943 port of the router , you canno[...]

46_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M  Access to the camera can also be gained by typing the[...]

English _47 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:ff ff:1111  h[...]

48_ web viewer web viewer T o check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DDNS. Once [...]

English _49 ● WEB VIEWER INST ALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. 1. When accessing the start screen of the monitoring page, click the yellow warning message in the top of the page. 2.[...]

50_ web viewer web viewer INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click < Click Here >. 2. When the file download dialog pops up, click <[...]

English _51 ● WEB VIEWER 5. When done, click < Close >. 6. Close and restart the web br owser , and try to access the Web Viewer . When Silverlight Runtime is properly installed, you will see the Live screen. J  For normal installation, set the Block Popup setting as follows: ex) Internet Explorer  T ools  Block Popup  T urn Off[...]

52_ web viewer web viewer USING THE LIVE SCREEN Item Description  Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the SD memory. c Setup Move to the Setup screen.  Viewer Screen Displays the Live video on the screen.  Audio Display the audio Listen and Talk toggle button on [...]

English _53 ● WEB VIEWER Item Description  Digital zoom You can use the mouse wheel to activate the digital zooming.  Screen Optimization, Full Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live screen.  Capture Saves the snapshot as an image file in the .bmp or .jpg format.  Video Format You ca[...]

54_ web viewer web viewer T o toggle the audio sound 1. Click the [ Audio ( ) ] button. The corresponding button will be displayed in the Viewer . 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button. J  The Audio button will be active only if you have set the Audio Input to < Use > in the [...]

English _55 ● WEB VIEWER PLA YBACK (EVENT) 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ Search ( ) ] button. The search r esults will be displayed in the list. M  If more than 500 events are recorded within the se[...]

56_ web viewer web viewer PLA YBACK (TIME) 1. Click [ Search by Time ( ) ]. 2. Click a desired date in the calendar . The video on the specified date will be played. 3. If the video playback is stopped, select a time and click [ Play ( ) ] to play the video for the selected time. While the video is being played, the recor ding time for the current [...]

English _57 ● WEB VIEWER T o back up the searched video 1. Click [ ] on the scene to back up. Save as window appears. 2. Click [ Save ]. The screenshot will be backed up to the specified path. T o play the backup video The backup video will be saved in .avi format. The backup video can be played with any media player supporting the format on your[...]

58_ setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [ Setup ( ) ]. 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Video profile >. 3. [...]

English _59 ● SETUP SCREEN T o add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number . 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the selected c[...]

setup screen 60_ setup screen What is GOP size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which cont[...]

English _61 ● SETUP SCREEN T o set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to < On >. 2. On the video screen, click a vertex of the selected area to display the dialog as shown. 3. Provide a name and color . Then, press [ OK ]. 4. If you want to delete an area, select t[...]

setup screen 62_ setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : SSDR, White balance, Backlight, Exposure, Special, OSD, Time OSD [...]

English _63 ● SETUP SCREEN • AWC : Corr ects the colors of the camera video to be optimized to the current lighting condition and screen mode. Y ou may need readjustment if the lighting condition is changed. • Outdoor : Automatically corr ects the video colors of the camera to be optimized to the outdoor environment. • Indoor : Automaticall[...]

setup screen 64_ setup screen • Shutter speed : Contr ol the shutter speed manually . • SSNR3 : Specify the use of noise r eduction. • SSNR3 level : Adjust the noise r eduction level. • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sh[...]

English _65 ● SETUP SCREEN • SSNR3 level : Adjust the noise r eduction level. • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.  If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.  The greate[...]

setup screen 66_ setup screen • Sharpness level : The higher the level is, the sharper and clear er the outline of the image becomes. • Gamma : Adjust the contrast of the image. • Color level : Adjust the color level of the image. • Alarm in : Set the image to Color or B/W depending on the state of the alarm sensor in sync with the IR.  [...]

English _67 ● SETUP SCREEN NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : Specify[...]

setup screen 68_ setup screen Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary .  Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP port : HTTP port used to access the camera via the web browser . The default is 80(TCP). ?[...]

English _69 ● SETUP SCREEN • Public DDNS : Select one of pr ovided public DDNS servers when you use a public DDNS server . - Host name : Enter the name of the host (i.e., host name of Dyndns) that is register ed with the DDNS server . - User name : Enter the user name for the DDNS service. (i.e., user ID that is register ed with Dyndns) - Passw[...]

setup screen 70_ setup screen 5. Select a < CLASSIFICA TION > and specify the < MODEL NUMBER >. 6. Specify the product location with a description if necessary . 7. Click [ REGISTRA TION ]. The product will be added to the product list that you can check. T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set &[...]

English _71 ● SETUP SCREEN IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restrict[...]

setup screen 72_ setup screen Installing the certificate 1. Enter the certificate name. 2. Select the certificate file to be installed and certificate key , and click [ Install ( ) ] button. Deleting the certificate 1. Click [ Delete ( ) ] button. 2. T o delete a public certificate, you should access the network video decoder in the mode of < HT[...]

English _73 ● SETUP SCREEN QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Provide the IP addr ess. The default prefix is 32. For DSCP , the default is set to 63. 4. Select an IP address to which you will apply QoS. Only t[...]

setup screen 74_ setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is “admin4321”.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and othe[...]

English _75 ● SETUP SCREEN • E-mail configuration - Use SSL : Specify the use of SSL. - Server address : Enter the IP addr ess of the email server that you use for the email transfer . - Use authentication : Select whether to use authorization. - User ID : Enter the user ID for logging into the email server . - Password : Enter the user account[...]

setup screen 76_ setup screen T o make r ecording on the SD memory 1. Check the < T otal size > and the < Fr ee size >. 2. If the SD memory has a sufficient fr ee space, set < Record > to < On >. Otherwise, check the stored data and if you find them not important, then click < Format > to format the SD memory .  If [...]

English _77 ● SETUP SCREEN Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm input >. 3. Specify an input device. • T ype - Normal Open : It is normally open, but if it is closed, an alarm will be triggered. - Normal Close : It is[...]

setup screen 78_ setup screen Motion Detection 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Motion Detection >. ❖ Motion Detection 1. Specify the use of motion detection. 2. Set the motion detection mode to Mask. • Detect : Detect a motion that may occur in the selected area. • Mask : Detect a motion that may o[...]

English _79 ● SETUP SCREEN - An object hides other objects behind. - T wo or more objects overlap or one object divides in multiple portions. - T oo fast object (for a proper detection, one object should be found overlapping between contiguous frames). - Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or he[...]

setup screen 80_ setup screen Network disconnect You can perform the saving/relay/preset operation after receiving an event of a physically disconnected network. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Network d isconnect >. 3. Specify the use of “Network disconnect”. 4. Specify the activation time and activ[...]

English _81 ● SETUP SCREEN SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Device name : Pr ovide a device name that will be displayed on the Live screen. • Locatio[...]

setup screen 82_ setup screen • System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually . - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchr onize the time with the connected PC. 4. When done, click [ Apply ( ) ].[...]

English _83 ● SETUP SCREEN Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Reset the other [...]

setup screen 84_ setup screen T o save the curr ent settings and restore the backup settings 1. Click [ Backup ]. The Save As dialog should appear . 2. Specify the backup path with a proper file name, and click [ Save ]. The backup file will be saved to the specified path in the format of “ .bin ”. 3. T o r estore the backup settings, click [ R[...]

English _85 ● SETUP SCREEN Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • Syslog : Y ou can check the system logs where any system changes are r ecorded including the time information. • Evtlog : Y ou can check the event logs including[...]

86_ appendix appendix SPECIFICA TION Items Description SNB-1001 SND-1080 SNV-1080 Video Imaging Device 1/4” PS CMOS Total Pixels 680(H) x 512(V) Effective Pixels 640(H) x 480(V) Scanning System Progressive Min. Illumination 0.7 lux (F1.2) S / N Ratio 50dB Video Out DIP Connector, for installation Lens Focal Length (Zoom Ratio) - 2.2~7.7mm (3.5x) [...]

English _87 ● APPENDIX Items Description SNB-1001 SND-1080 SNV-1080 Pan / Tilt / Rotate Pan Range - 0°~352° Pan Speed - - Tilt Range - 17°~90° Tilt Speed - - Rotate Range - 0°~351° Preset - - Preset Accuracy - - Auto Tracking - - Operational Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto ( S/W ) / Color / B/ W Ba[...]

appendix 88_ appendix Items Description SNB-1001 SND-1080 SNV-1080 Operational Electronic Shutter Speed Auto / A.FLK / Manual ( x60~1/12000sec ) Digital Zoom - Flip / Mirror Off / On Intelligent Video Analytics Face Detection Alarm I/O Input 1ea Remote Control Interface - RS-485 Protocol - Network Ethernet RJ-45 (10/100BASE-T) Video Compression For[...]

English _89 ● APPENDIX Items Description SNB-1001 SND-1080 SNV-1080 Network IP IPv4, IPv6 Protocol TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS , QoS Security HTTPS(SSL) Login Authentication Digest Login Authentication IP Address Filtering User access Log[...]

appendix 90_ appendix Items Description SNB-1001 SND-1080 SNV-1080 Environmental Operating Temperature / Humidity -10°C ~ +50°C (+14°F ~ +122°F) / 20 ~ 80% RH Ingress Protection - IP66 Grade (Waterproof) Electrical Input Voltage / Current 12V DC , P oE(IEEE802.3af) Power Consumption Max. 3.4W (DC 12V), Max. 4W (PoE) Mechanical Color / Material [...]

English _91 ● APPENDIX PRODUCT OVERVIEW Unit : mm (inch) ❖ SNB-1001 74.3 (2.93") 114.4 (4.50") 54.5 (2.15")[...]

appendix 92_ appendix ❖ SND-1080 Ø115.8 (4.56") 115.8 (4.56") 42.4 (1.67") 92.7 (3.65")[...]

English _93 ● APPENDIX ❖ SNV -1080 Ø137.0 (5.39") Ø100.0 (3.94") 105.9 (4.17")[...]

appendix 94_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without[...]

English _95 ● APPENDIX PROBLEM SOLUTION Cannot record into the SD memory card. y Check if the memory card is defective. A SD memory card is inserted but the product does not recognize it. y Check if the memory card is inserted in the proper direction. Operation of memory card that is formatted by other devices is not guaranteed with this camera u[...]

OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 BSD 2.0 BSD 1.0 http://www .opensour ce.org/licenses/bsd-license.html lighttpd is a secure, fast, compliant, and very flexible web-server that has been op[...]

Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions ar e met : 1. Redistributions of sour ce code must retain the above copyright notice, this list of conditions and the following disclaimer . 2. Re[...]

GPL/LGPL SOFTW ARE LICENSE The software included in this pr oduct contains copyrighted software that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this pr oduct by sending email to help.cctv@samsung.com If you want to obtain the complete Corresp[...]

original authors' reputations. Finally , any free program is thr eatened constantly by software patents. W e wish to avoid the danger that redistributors of a free pr ogram will individually obtain patent licenses, in effect making the pr ogram proprietary . T o prevent this, we have made it clear that any patent must be licensed for everyone&[...]

based on the Program is not r equired to print an announcement.) These requir ements apply to the modified work as a whole. If identifiable sections of that work are not derived fr om the Program, and can be r easonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you[...]

However , parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. Y ou ar e not requir ed to accept this License, since you have not signed it. However , nothing else grants you permission to modify or distribute the Program or its derivat[...]

a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Softwar e Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by th[...]

WARRANTY ; without even the implied warranty of MERCHANT ABILITY or FITNESS FOR A P ARTICULAR PURPOSE. See the GNU General Public License for more details. Y ou should have received a copy of the GNU General Public License along with this program ; if not, write to the Fr ee Software Foundation, Inc.,51 Franklin Street, Fifth Floor , Boston, MA 021[...]

or asking you to surrender the rights. Therefor e, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to r espect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you r [...]

An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work un[...]

3. Pr otecting Users' Legal Rights From Anti-Circumvention Law . No covered work shall be deemed part of an effective technological measur e under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting cir cumvention of such measures. When [...]

model, to give anyone who possesses the object code either (1) a copy of the Corresponding Sour ce for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access[...]

or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Sour ce conveyed, and Installation Inf[...]

or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However , if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally , unless and until the copyright holder expl[...]

Each contributor grants you a non-exclusive, worldwide, royalty-fr ee patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent license” is any express agreement or c[...]

work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requir ements of the GNU Affer o General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised V ersions of this License. The Free Softwar e[...]

USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software ar e designed to take a[...]

Public License therefor e permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library . We call this license the “Lesser” General Public License because it does Less to protect the user’ s freedom than the ordinary General[...]

is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. Y ou may copy and distribute verbatim copies of the Library’ s complete sour ce code as you receive it, i[...]

it is irreversible for that copy , so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy . This option is useful when you wish to copy part of the code of the Library into a program that is not a library . 4. Y ou may copy and distribute the Library (or a portion or derivative of it, un[...]

1 and 2 above); and, if the work is an executable linked with the Library , with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to pr oduce a modified executable containing the modified Library . (It is understood that the user who changes t[...]

it. However , nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are pr ohibited by law if you do not accept this License. Therefor e, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and co[...]

later version published by the Free Softwar e Foundation. If the Library does not specify a license version number , you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free pr ograms whose distribution conditions are incompatible with these, write to the author t[...]

WARRANTY; without even the implied warranty of MERCHANT ABILITY or FITNESS FOR A P ARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. Y ou should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor , Bo[...]

Original SSLeay License Copyright (C) 1995-1998 Eric Y oung (eay@ cryptsoft. com) All rights reserved. This package is an SSL implementation written by Eric Y oung (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL. This library is free for commer cial and non-commercial use as long as the following conditions [...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 F AX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-3[...]