Samsung Version 1.1 manuale d’uso

WEB WEB TRANSMITTER SNS-110 Owner's Man ual (V er sion 1.1) 1 2 4[...]

2 [Power Adapter] You must use only a compatible power adapter enclosed in SNS-110 package. [Fuse] You must use only an identical fuse (250V, T3.15A) used in SNS-110. [Battery] You must use only batteries (DC3V) applicable to SNS-110 usage to avoid explosion risk. This manual is the basic guide for all Web Transmitter SNS-110 users. It mainly illus[...]

3 Regulation Appr ov al Note: This equipment has been tested and f ound to comply with the limits f or a Class B digital de vice , pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against harmful interface in a residential installation. This equipment generates , uses and can radiate r adio frequenc[...]

4 Chapter 1. SNS-110 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Functions and Feature - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -[...]

Chapter 7. Administration Mode --------------- --------------- - ----- 4 2 Initial Screen ---------------- --------- ----- --------------- - ---- 4 2 Camera Set-up ---------------- --------------------------- - ----4 3 PAN/TILT/ZOOM Set-up ------------ ------------------------------ 4 5 Quad/Sequential Set-up ---------------- --------------------- [...]

6 Chapter 1 SNS-110 Overview Overview SNS-110, connected to surveillance cameras or other external devices, compresses video image as motion JPEG through zip algorithm and transmits it to a remote party through network (Ethernet, cable modem). SNS-110 may be connected to maximum of 4 video images and concurrently transmits the image in a form of si[...]

● You can send video image files through FTP server at certain time or in regular intervals. Users can access the FTP server and search the saved video files. ● You can change the LOGO image on SNS-110 screen, or background color or font colors. Search SNS-110 to download the latest software at http://www.samsungelectronics.com/ 7[...]

8 ① Video In ② Video Out (Loop Through Out) ③ Control S/W ④ F H (S/W) ⑤ Tx R (S/W) ⑥ Rx R (S/W) ⑦ Network LED ⑧ Power LED Preset Button Reset Button 2 1 8 79 10 4 3 3 4 5 6 1.CONTROL 2.F/H 3.Tx R 4.Rx R Names and Function Familiarize yourself with the names and function of each part on the front and back panels, before installing SN[...]

9 Rear of SNS-110 Connects to maximum of 4 alarm sensors. Connected to the external device for remote control Connects to RS-485 cable and remotely regulate PAN / TILT / ZOOM / FOCUS controllers. Full Duplex : use RX and TX. Half Duplex : use TX . Connects to console and an external modem through the RS-232C cable connection. ❈ You are recommende[...]

10 Chapter 2 Installing SNS-110 The fluctuation of operation voltage must be within 10% of the regulation voltage, and the electric outlet must be always grounded. Electric heat devices, such as, hair dryers, irons, refrigerators, etc., must not be co-used in the same outlet with SNS-110. AVR is recommended for stable power supply. Caution Preparat[...]

11 Cautions in Installation Be aware of the following cautions when installing SNS-110. ● Always turn the power off before SNS-110 installation. ● Severe impact or vibration may cause malfunction. ● Avoid places with strong magnetic or electric field, or places near a radio or TV. ● Always keep the place dust-free when installing or moving [...]

12 ● Position it in an open space with flat surface, keeping the aptitude temperature. Also, maintain the clearance between back of the main body and the wall. ● Be careful not to insert accidentally any conducting material in the ventilation space of product. ● Turn the power off and disengage the power cord from the body, when changing the [...]

13 Always use a dry cloth when cleaning this product. If the contamination is serious, please wipe it first with a neutral detergent, then with a dry cloth. Avoid using volatile material, such as alcohol, benzene, or sinner, when wiping the surface, due to potential damage on the surface. NO TE ● Do not neglect fumes or unusual odor, which may be[...]

14 Unpac king When you purchase SNS-110, after removing the wrap, place the product on a flat surface or where you will be installing it. Then, check if there is any missing part among the following items. ● SNS-110 Main Body ● User’s Guide ● Power Adapter (1EA) ● Power Cord (1EA) ● RS-232C Cable (1EA) 1 2 4 SNS-110 Main Body RS-232C Ca[...]

OUT VTR, DVDP, TV 3 4 1.CONTROL 2.F/H 3.Tx R 4.Rx R You may connect the following items with SNS-110, such as video image players (e.g., VTR, DVDP, etc.,), network devices, alarm sensors, PAN/TILT/ZOOM/FOCUS controllers, and PC-connected consoles. Connecting to Camera and Video Ima g e Pla yer s (e .g., VTR, D VDP , TV) SNS-110 automatically detect[...]

16 SNS-110 produces the video image signal of the corresponding channel, if connected with external instruments to Video Out 1~4 (loop through BNC). The terminal resistance of 75 Ω will be automatically seized by the connection with external instruments. OUT VTR, DVDP, TV VIDEO IN External Device 3 4 1.CONTROL 2.F/H 3.Tx R 4.Rx R Connecting to Ex[...]

17 Cable Modem RS-232C ETHERNET DC 5V ALARM IN R/O RX TX 1 2 3 4 - + - + RA RC GG RS-232C ETHERNET DC 5V ALARM IN R/O RX TX 1 2 0 3 4 0 - + - + RA RC RJ- 45 Ethernet Cable(Direct) RJ- 45 Ethernet Cable(Direct) Cable Modem Cable Network CMTS (Cable Modem Termination System) HUB Back Bone Back Bone INTERNET INTERNET Connecting to Netw ork Ether net(1[...]

18 Connecting to Alarm Sensors and External De vices S E N S O R 1 S E N S O R 2 S E N S O R 3 S E N S O R 4 G N D G N D ALARM IN R/O RX TX 1 2 3 4 - + - + RA RC GG Function Name Regular Capacity Alarm In Relay Out Alarm 1/2/3/4/G RA/RC -TTL Level(5VDC) -Initial Contact Resistance, Max. : 75m § -Max. Switching Power : 60W, 62.5VA -Max. Switching V[...]

19 Connecting to P AN / TIL T / ZOOM / FOCUS Contr oller The RX/TX terminal of the reverse side of the SNS-110 uses the RS-442/485 interface and PAN/TILT/ZOOM/FOCUS controllers can be connected to the terminal. The PAN/TILT/ZOOM/FOCUS controllers that are supported are the following. ● Samsung Smart-Dome Camera (SCC-641) ● Pelco : Pelco-P Proto[...]

20 Connecting to RS-232C When connecting PC serial port (COM1, COM2) through RS-232C from back of SNS-110, you may select console mode of SNS-110 by using PC terminal emulation program (HyperTerminal). Control S/W from the front panel must be positioned " OFF ". RS - 232C T erminal (D-Sub 9Pin) RS - 232C Connecting to Cable RS-232C ETHERN[...]

21 1 1 14 2 3 7 13 25 2 3 5 9 6 9Pin F emale to 9Pin Female T erminal Em ulation Communication Set-up Items Contents Baud Rate 38400 bps Data Bit 8 Bit Parity None Stop Bit 1 Bit Flow Control None Data Code ASC II 1 2 3 5 9 6 1 2 3 5 9 6 Creating RS-232C Cable The RS-232C Cable is packed with SNS-110, and so you don’t need to make it . The wiring[...]

22 RS-232C ETHERNET DC 5V ALARM IN R/O RX TX 1 2 3 4 - + - + RA RC GG Connected from SNS-110 to PC(T wisted Cable) RS-232C ETHERNET DC 5V ALARM IN R/O RX TX 1 2 3 4 - + - + RA RC GG Creating Ethernet Cable Since the Ethernet Cable is not packed with SNS-110, the user has to purchase and use it . Direct Ethernet Cable HUB Back Bone INTERNET Twisted [...]

23 Chapter 4 Setting an IP Address Ethernet address (00-00-f0-XX-XX-XX) is recorded on the bottom of the product at the time of purchase. Because it may be accidentally erased, please duplicate the number and keep it somewhere else. Caution No information upon network is set up except Ethernet address (MAC address) in factory defaults. You must set[...]

24 Setting In Ethernet (10BaseT/100BaseT) F or Windows 95/98/ME/NT/2000/XP (1) Open Dos window from network-connected PC with SNS-110. (2) Execute "arp -s". (3) Confirm if the IP address completely agrees with Ethernet address as shown below by executing "arp -a". If does not completely agree after pursuing (2), delete the prese[...]

25 (4) Wait until you receive the normal response after executing "ping". (5) If you are getting no response, attempt 1~2 more times. If you are still not getting any response, please refer to APPENDIX D "FAQ". ping <SNS-110 IP Address> - 110 -n 20 Example : ping 168.219.15.250 - 110 -n 20 Pinging 168.219.15.250 with 32 by[...]

26 Setting in Unix (1) Execute the following instruction for network-connected Unix machines with SNS-110. (2) Execute "rarp -s". (3) Confirm if the IP address completely agrees with Ethernet address as shown below by executing "rarp - a". If does not completely agree after pursuing (2), delete the present IP address by executin[...]

27 (4) See if you receive the normal response as shown below after executing " ping " . (5) If you do not get responses, type "Ctrl+C" to stop and try number (4) couple of more times to re- execute. If you still do not get response, refer to the APPENDIX "D." ping <SNS-110 IP Address> Example : ping 168.219.15.25[...]

28 Setting with IP Installer The 'IP Installer' is an application program that supports easy setting of network parameters of SNS-110 such as IP Address, Gateway, Subnet Mask and so on. Before executing the 'IP Installer', the SNS-110 should be connected with PC through RS-232C cable. The 'IP Installer' works on Window[...]

29 If the serial port which you select is being used by other device, you will see the following window. In this case, you have to stop the usage of serial port by other device or change the connection of SNS-110 to other serial port. Note (4) If the SNS-110 and PC is successfully connected through RS-232C cable, you will see the following window. [...]

30 (6) Set up or modify the network parameters, and then click the 'OK' button. (7) If the setting of network parameters succeeds, you will see the following window.[...]

31 (8) After the setting of network parameters, the SNS-110 will automatically reboots. If all of the network parameters are properly set, you can connect SNS-110 with Web Browser. If the 'success' message window does not appear even though you wait more than 10 seconds after clicking 'OK' button, stop the program by clinking &a[...]

32 Please, refer to Chapter 5 and 7 for Log-in and administration mode network setting up. Note Setting Other Netw ork Information After successfully setting up the IP address in Ethernet, follow the next procedure to set up additional network information. After the previous procedure, you must set up the following information, confirmed by the net[...]

33 In Cable Netw ork thr ough Cable Modem (1) Connect according to " Connecting to Cable Modem " of Chapter 3 Connecting to Network, and turn the SNS-110 power on. ( 2) SNS-110 automatically receives the following information from the cable network manager by executing DHCP (Dynamic Host Configuration Protocol), if connected to cable netw[...]

34 Chapter 5 SNS-110 Log-in There may be problems with video image transfer if Netscape 6.0 or above is used, so use a version below 6.0 Note After successfully setting up an IP address as in Chapter 4, execute a web browser (Netscape or Explorer) from an Internet PC. Ideal Specification If your PC performance is not compatible, the image processin[...]

35 (3) If you have properly logged in, you will see the following. (4) Properly enter user name and password and click "OK" button. You should see the initial screen of Chapter 6 Application Mode. Log-in thr ough Explorer First Time (1) If you have never logged in through Explorer, first download plug-in program from SNS-110. Then, follow[...]

36 (4) Enter the SNS-110 IP Address in Address : xxx.xxx.xxx.xxx (5) If you have properly logged in, you will see the following. (6) Properly enter user name and password and click " OK " icon. Then, you should see the security message.[...]

37 (7) Click " Yes " . You just have completed downloading Explorer plug-in program from SNS-110. Then, you will see the initial screen of Chapter 6, Application Mode. (8 ) If security level is set to " High " ,then the following window appears and the program cannot be installed. Therefore, go back and set the security level to[...]

38 Others (1) The initial user name and password in factory defaults are as follows. ● User Name : root ● Password : w2000 (2) Log-in window appears only under the following condition. ● When "Password Enable" is set in the Web Transmitter setting of the Administration mode and you have access to the Application mode, Log-in window [...]

39 Initial Screen (1) If you have entered correct user name and password or clicked " Application " button, you will see the next initial screen of application mode. (2) You will see the quadruplex screen with 4-video image input. And, without any image input, you will see " No Video " Single Screen (1) By selecting an image fro[...]

40 Quadruplex Screen (1) Click " Quad " button on left side of the screen. You will see 4 individual screens in the quadruplex screen. (2) Click any of the 4 screens to view it in single screen. A utomatic Sequential Screen (1) Click " Sequential " button on left side of the screen in Application mode. You will see 4 screen sequ[...]

41 Single Screen with P AN/TIL T/ZOOM Contr oller (1 ) After enabling PAN/TILT/ZOOM in Administration mode, if you select an image from "Camera 1~4" button, you will see the next screen. (2) Before operating PAN/TILT/ZOOM, the PAN/TILT/ZOOM controllers must have been connected, and P/T/Z configuration must have been established in Adminis[...]

42 Chapter 7 Administration Mode Initial Screen (1) You must enter "root" for the user name and its password in the Log-in window to transfer to the below Administration mode screen for both password-enable and password-disable condition. (2) If the camera does not operate normally after accessing to the Administration mode, the camera ic[...]

43 Camera Set-up (1) You will see the following screen by clicking " Camera " icon in Administration mode. (2) Camera Input Automatically recognizes image broadcasting system (NTSC/PAL), Color/Black &white, or No Video. If you click " Refresh " button at any time, this function will run through and set up new configuration o[...]

44 (6) PAN/TILT/ZOOM Select " Disable " , if Pan/Tilt/Zoom controller is not connected. At this time " Preset " button is inactivated. If Pan/Tilt/Zoom are properly connected, select " Enable " . (7) Preset It will activate " Preset " button. At this time, you will see the next screen, and you may remotely co[...]

45 P AN/TIL T/ZOOM Set-up (1) You will see the next window, if you click "P/T/Z" icon in administration mode. (2) Device To control PAN/TILT/ZOOM/FOCUS, connect the PAN/TILT/ZOOM/FOCUS camera & controller to the +, - terminals of RS-485 on the rear of your web transmitter. For further information, refer to Chapter 3. " Connecting[...]

46 Quad/Sequential Set-up (1) You will see the next screen by clicking Quad/Sequential icon in Administration mode. (2) Quad Size Select from either Small or Normal. (3) Sequential Size Select one from Small/Normal/Large. (4) Sequential Interval You may select the sequential interval from 3secs to 60secs. Your selected time will be the interval bet[...]

47 W eb T ransmitter Set-up (1) You will see the next configuration window by clicking " Web Transmitter " in Administration mode. (2) Date & Time Select date and time. (3) Security ① New root pswd Changes root password. New password must be more than 3 letters and less than 32, and must include Arabian numbers. Every time you log i[...]

48 ③ Pswd Enable Restricts the access from other users. If you check the check box of " Pswd Enable " and click " Apply " button, you should input registered username and its password in Log-in window to access to the Application mode. If you don’t check the check box of " Pswd Enable " , anyone is accessible to th[...]

49 (5) Factory Default If you click "factory default" button, all information or configuration of SNS-110 will return to the point of purchase, except Ethernet address. Refer to APPENDIX B "Factory Default" for details. Be careful not to install any other file except SNS-110 program (sns110_vXXX_XXXX.bin) during S/W upgrade. You[...]

Setting the ALARM / RELA Y Out (1) Connect the alarm sensor to another device according to the ‘Chapter 3 Connecting to Instruments’. The alarm level of the alarm terminal 1~4 is the following. ● Normal condition : TTL High Level (DC 5V) ● Alarm : TTL Low Level (DC 0V) (2) If the alarm is set off the SNS-110 sends video images connected to [...]

51 (6) Enable Each alarm terminal has to be set as for whether the "Mail" or "FTP" transfer function is going to be used. If the alarm sensor isn't installed or if the input signal can be ignored, click "No". (7) Pre-alarm If the video image transfer is set to FTP and the alarm went off, this will send the images [...]

52 Netw ork Set-up (1) You will see the next configuration window by clicking " Network " in Administration mode. (2) IP Address Enter SNS-110 IP Address. If the IP Address has been properly set up according to Chapter 4 Setting up IP Address, the IP Address will automatically be set up and shown in the window. If the IP Address is change[...]

53 (8) Gateway Set up the Gateway Address assigned by the network manager. (9) DHCP (Dynamic Host Configuration Protocol) DHCP is protocol, which automatically assigns IP address in network environment. Those network environments automatically assigned with IP Address are as follows. ● Set DHCP "Yes" at Ethernet, which uses DHCP Sever. [...]

54 (11) FTP Server Specifies the FTP Server address to send still image. The server address has to be either network IP Address where SNS-110 can access or Host Name. (12) FTP Port Set the FTP Port to transfer still images to the FPT server. Default setting is at 21. (13) User Specifies the User ID to access FTP server. (14) Password Specifies the [...]

55 File T ransfer Setting (1) Click "File Server" at Administration Mode to open the following window and to specify the file transfer through the FTP server. (2) Camera 1~4 Specifies the FTP transfer for input image from Camera 1 to Camera 4. Click "No" not to use FTP transfer, click "Once" to transfer at one certain [...]

56 (5) Between Specifies the starting and finishing time of image file transfer. It only applies to files which were set as "Every" or "Both" at (2). You can set "Time"(0~23), "Minute"(0~59), or "Second"(0~59). If starting and finishing time are identical, image files are transferred all day. (6) Da[...]

57 Custom User Interface Setup (1) By clicking the "Web Browser" icon in the Administration Mode, the Custom User Interface setting window appears. Start page, page title, background color, font color and language can be set up, as the user wants. (2) Start Page The start page in the Application Mode allows a choice between one of Camera [...]

58 ABOUT/ SUPPOR T/ HELP (1)ABOUT Provides you information on SNS-110. (2)SUPPORT Samsung Electronics’ English Version Homepage(http://www.samsungelectronics.com/)is linked. Search for an webTX or SNS-110, and you can download SNS-110 user manual, a last update program and troubleshooting instructions.[...]

59 (3 )HELP Provides you with help messages on each function. You can see help message as shown below by clicking in the configuration window of Administration mode. Ex) the Help that appears when the is clicked on the Camera setting window. ? ?[...]

WEB APPENDIX A SNS-110 SPECIFICA TIONS 60[...]

61 APPENDIX A SNS-110 SPECIFICA TIONS SPECIFICA TIONS Video In/Out ● Composite 4 Channel, Color & Black/White ● NTSC/PAL compatible ● BNC Type ● Loop Through Out ● 1.0 Vp-p, 75 Hi Z Termination type Har dware ● 32Bit RISC CPU ● 2MByte Flash Memory ● 32MByte SDRAM Operation System ● RTOS (Real Time OS) Netw ork Interface ● 10[...]

62 P erformance ● Max 30 Frame/Sec (1 User Single Mode Connection) Alarm In ● Input 4 Port ● TTL Level " Low " Active ● Sends the Video screen through E-mail/FTP in case when alarm sets off ● Pre-Alarm Rela y Out ● Output 1Port ● Regular Capacity of Relay - 2A 30VDC - 0.5A 125VAC Serial Connector ● RS-232C 1 Port (9 Pin D-[...]

63 Regulation Appr ov al ALRAM ALARM IN R/O RX TX 1.CONTROL 2.F/H 3.Tx R 4.Rx R 1 2 3 4 - + - + RA G G RC Outside view Note: This equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against har mful interf ace[...]

64 WEB APPENDIX B F actor y Default[...]

65 APPENDIX B F actor y Default Items Factory Default Value Camera 1~4 Camera Input Blank Size Normal Video Quality Low Text Display Blank/No PAN/TILT/ZOOM Disable Apply to Only Cemera 1~4 P/T/Z Device None Baud Rate 2400 Data Bit 8 Stop Bit 1 Parity Bit None Camera 1 ldentity 0 Camera 2 ldentity 1 Camera 3 ldentity 2 Camera 4 ldentity 3 Quad/ Quad[...]

66 All network-related information but Ethernet Address will be deleted. Therefore, you must be extremely careful when you execute this function. W arning Items Factory Default Value Alarm / Relay Out Status Off Relay Out Sender Blank Enable No Receiver Blank Subject Blank Message Blank Camera Camera 1,2,3,4 Image No. Mail : 1/ FTP: 10 Time Delay N[...]

67 WEB APPENDIX C Ho w to Use Console[...]

68 APPENDIX C Ho w to Use Console ☞ If any key is pressed within two seconds, manual setup mode will appear. ☞ Indicates Ethernet address ☞ Indicates the time elapsed with SNS-110 ☞ Indicates IP address, Subnet Mask, and Gateway ######################################################## # # # SAMSUNG Electronics. Co., Ltd. # # webTX(Internet [...]

69 (2) When you correctly enter user name " root " and password, the following message will appear. Codec initialized, register updated. Create/Start working tasks... (f_CompVideo()) JCPY task start (id=1638400) AlarmCheck task start (id=1703936) Mailing task start (id=1769472) PTZ control task start (id=1835008) Create FTPClientTask.. En[...]

70 (2) ping: Indicates the connection status to a given IP Address (3) status: Indicates the current condition and information of SNS-110 Command (1) help: Indicates Command items SNS-110> status size of data = 2144 SNS-110 System Parameter List Version sns110.1.1 build 01.10.16.13.55 ********** Board Parameters ********** Compiled option : Code[...]

71 --User information number of user : 2 user list 0 <root:w2000:10> 1 <guest1:guest1:1> --Camera setting Cam1 : size 1, CR 0, title off, <> Cam2 : size 1, CR 0, title off, <> Cam3 : size 1, CR 0, title off, <> Cam4 : size 1, CR 0, title off, <> Quad size 1, Quad mode 0, Seq size 1, Seq interval 1 Cam ptz control[...]

72 (4) tftpdn : Using the ftp Server, software can be downloaded as the following. First the tftpdn Server has to be running on the PC with the new software. The tftp Server isn't offered separately. Users must use their own tftp server programs. ☞ Enter the filename of the software that will be downloaded from the tftp Server ☞ The softwa[...]

73 Manual Configuration Mode (1) Once you turn the power on and SNS-110 functions normally, the following message will appear, and if you press any key, you will be able to set the values manually. ☞ Press any key at this stage. The following message appears if you do not press Space Bar or Enter. This is to wait for the reception of the IP Addre[...]

(3) If you enter "p" at "Select items?", you can access the network information. 74 To go to the next level, go over to the number (1) after re-running SNS-110. When you successfully entered Space Bar or Enter, the following screen appears. (2) When the following message appears by running the above item, you can manually set th[...]

75 (4) If you enter "c" when "Select items?" appears, you will be provided with the menu, which will allow you to manually set the network information. tftp server address: 0.0.0.0 tftp boot file:[rom.bin] DHCP Enabled:[1] IP auto-reg server:[NULL] IP auto-reg cgi:[/cgi-bin/webtx.cgi?regist=%e&host=%i] IP auto-reg enable:[1][...]

76 (5) If there is information you would like to change or update, you can do so at this time. (6) If you enter "q" when "Select items?" appears, you will go back to menu of (2). (7) If you enter "q" when " Select items?" appears, SNS-110 will boot, and Network will be set to the values you have assigned. To [...]

77 WEB APPENDIX D Dynamic IP Inf ormation T ransfer[...]

78 Appendix D Dynamic IP Inf ormation T ransfer In such an environment where you have to be assigned with Dynamic IP as Cable Modem, you need separate method since users cannot know IP information. SNS-110 uses two methods to show the Dynamic IP information to users. One is to send IP information to the administrator’s email, and the other is to [...]

79 Enter "5" and go to IP notify-mail address to type E-mail address you want. Enter "4" and go to IP notify-mail enable/disable and enable it. Select Quit menu to exit Boot Command Mode. Select items? [ ] 5 IP notify-mail address? [webtx@email.com] user@samsung.co.kr Select items? [ ] 4 IP notify-mail enable? [Y] When all the n[...]

Registering IP inf ormation with Administration ser ver Install HTTP server, which can process the Properties transmitted by SNS-110, or receive separate service from the Service Provider to register IP information with Administration server. Dynamically assigned IP information can only be set at SNS-110, whether which name or server will be used. [...]

81 Type "1" and go to IP auto-regist server address" to type registered Web Server address. The example below is the IP Address such as 168.219.44,137 or registered host name such as www.samsung.co.kr. Type "2" and go to IP auto-regist cgi format to type the cgi program path to transmit or the name of name of the program pa[...]

82 %g : Ethernet address (standard) Example: 00-00-f0-ff-a1-42 %i : IP Address (dotted decimal) Example: 168-219-44-137 %u : IP Address (32bit unsigned integer, hex form) Example: a8db2c89 %% : Means % Select Quit Menu to exit Boot Command Mode. If you entered as the example above, the URL that is transmitted to the SNS-110-set Administration Serve[...]

83 Setting with the W eb Br owser When you have SNS-110 address and can access through the Web Browser, you can change the setting as above at the Administrator Mode. When you run the Network Setting window as explained in the Chapter 7 and click "Advanced" for DHCP, the Dynamic IP setting window appears as below. You can change or add th[...]

84 WEB APPENDIX E FA Q[...]

85 APPENDIX E F A Q As you continue to use SNS-110, there could be some cases, which we have not yet discussed in this manual. In such a case, it might actually be when SNS-110 has an error. But in most cases, an easy do-it- right can fix the difficulties. Please react to the symptoms by following the instructions below. When y ou get no Message af[...]

86 (2) If LED of Network for SNS-110 is working correctly, the values for Network within SNS-110 might have been incorrectly entered. In such a case, refer to Supplement B Factory Default to turn the settings to the factory mode. Then, retry setting the IP address again, as shown in Chapter 4. The PC to setup the IP Address at SNS-110 must use the [...]

87 When the post-version software still operates, e ven after y ou have installed the updated version. (1) When you upgrade to the latest version of the software, the "Uploading is successful! New code will be loaded after reset" message appears. When this message appears, reset or restart SNS-110 and the new software will reboot the syst[...]

88 If the Video image has pr oblems when connected to SNS-110 using a Netscape (1) This can happen if Netscape 6.0 or above is used. (2) Use Netscape 5.X or below. (3) The defects related to Netscape 6.0 are being fixed. Y ou cannot use FTP for transf er when setting up FTP transfer (1) Check [Start] – [Settings] to see if current time is set for[...]

E E L L E E C C T T R R O O N N I I C C S S AB68-00278A[...]