Sanyo DSR-5709P manuale d’uso

DSR-5716P About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. INSTRUCTION MANUAL Digital Video Recorder with Multiplexer Function DSR-5709P z Refer to the included CD-ROM for the German, Fr ench, S panish and Italian “INSTRUCTION M ANUAL”. z Die “BEDIENUNGSA[...]

English 1 PRECAUTION Location For safe operation and sati sfactory performa nce of your unit, k eep the following in mi nd when selectin g a plac e for its ins talla tion: Shie ld it from di rect sunli ght and keep it aw ay from so urces of int ens e heat . Avoi d dusty or humid p laces . Avoid p laces w ith insu fficient v entilati on for pr oper [...]

2 English INTRODUCTIO N Main feat ures  The digital video reco rder records video fro m monitoring cam eras to its internal hard disk, and it can d isplay real video being mo nitored in four, six, n ine, 13 or 1 6 screens. Reco rded video can also be played b ack with multip le screens. The DS R-5709P c an on ly display split sc reen vi deo in f[...]

English 3 CONT ENTS 1 BEFORE US E .......... ................... ............. ...... 7 Notes on ha ndling th e internal HDD ........ ...... 7 Notes on ins tallation locations ........... ............ 7 The HDD and coolin g fan are c onsumab le componen ts. .................. .................... ............ 7 Important recording s ...............[...]

CONTENTS 4 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION MENU CONFIGURATION AND OPERATIONS . ............. ................... ............. .... 63 Basic menu operations ...................... .......... 63 Resetting menu items ........... ................... .... 64 Sub-menu c onfiguratio n . ..[...]

CONTENTS English 5 1 RECORDING IMAGES ............... ............. .. 168 Normal recording ........... .................... ........ 168 Timer recording .............. ............. ............. .. 168 Alarm recording ........ ............. ............. ........ 168 Pre-alarm recording . ............. ................... .. 168 2 WATCHING IMAGE [...]

CONTENTS 6 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 DVR VIEWER2 ........ ............. ................... .. 211 Before Usin g DVR Viewer2 ......... ............... 211 Structu re of the Scr een and t he Function of each Section .. ................... ............. ................... .. 2[...]

English 7 1 BEFORE USE Notes on handling the internal HDD This digita l video record er uses an interna l HDD. Be sure to ob serve the f ollowing po ints carefu lly when operating , setting-u p, or servici ng the digita l video rec order.  Do not subject the digital video recorder to sudden impact or vibration. If the digital v ideo r ecorde r i[...]

8 English BEFORE USE 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION  Automatic verification fun ction of the hard disk drive and cooling fan operation You can c onf irm t he ope rat ion statu s of the h ard disk driv e by viewing the flashing of the AL ARM indica tor on the f ront panel. Ch eck the AL[...]

English 9 2 NAMES AND FUNCTIONS OF PARTS Front panel 1. POWE R indicat or Lights up w hen the po wer is on. 2. FULL indicator ( J P.86) Flashes wh en the am ount of avail able mem ory in the hard disk’s r ecording area drops to the percen tage s pecifie d using menu s ettings. In addition, recordin g stops autom atical ly when no mor e memory i s[...]

NAMES AND FUNCTIONS OF PARTS 2 10 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 14. [EXIT/OSD] button and indicator z EXIT: Exits the mai n menu or a sub -menu. When a m enu is dis play ed, the indi cat or t urns off . (The EXIT oper ation is disa bled while the WARNIN G screen is display ed or a [...]

NAMES AND FUNCTIONS OF PARTS 2 English 11 Rear p anel 1. Optional b oard slot You can use t he slot to add on a R AID uni t using a SCSI (VZU-S CB1) interfac e or to con nect an exp ansion un it via an S-ATA (V ZU-SATB1) board. You c annot use a RAID unit and an expansi on unit at the same tim e. Please co ntact the de aler for deta ils. Whe n hand[...]

12 English NAMES AND FUNCTIONS OF PARTS 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6. Co ntrol termi nals * Specif y the outp ut setting s for the O UTPUT 1 a nd OUTPUT 2 termin als on the <DISPLAY SET> scree n. 7. [ALL RE SET] butto n When the [ALL RESET] button is pressed, the digital video r[...]

English 13 3 INSTALLATION AND CONNECTIONS This secti on describe s how to connect the di gital vide o recorde r to video ca meras a nd other devi ces. Be su re to read th e instru c tion manuals for e ach c onnect ed devi ce. z Imprope r connect ions may result in mal function or smoke em ission. z A separat e power su pply is requ ired for oper at[...]

14 English INSTALLATION AND CONNECTIONS 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION A system con troller or anot her DVR c an be connec ted to the RS-485 cont rol termina l. Perform settings in the <R S-485 SET> screen ( J P.12 0) wh en c onn ecti ng s yste m con tr oll er. Control a connected S[...]

INSTALLATION AND CONNECTIONS 3 English 15 When conn ecting multiple d evices, it is necessar y to mak e ter min atio n se tti ngs on bot h en d dev ices . z Set the RS -485 term ination sw itch of both end devices to ON. z Be sure to se t the RS-485 termin ation switches of all device s in betwe en (devices other than t he first and l ast device s)[...]

16 English INSTALLATION AND CONNECTIONS 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Connec t to a PC for c ontrol o f the di gital vid eo reco rder over a network wi th a switch or connect to the Intern et. To enable control of t he digital v ideo recor der over a ne twork, connect to the switch vi a [...]

INSTALLATION AND CONNECTIONS 3 English 17 The SENSO R ALARM OUT term inals are us ed to relay alarm signals w henever one of the dig ital video reco rder’s motion sensors is trig gered. Norm ally in an open cond ition, a terminal adopts a low conditi on when a sens or for the co rrespon ding camera number h as been trig gered. The conn ection s f[...]

18 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 PREPARING FOR USE When the power is tu rned on, the operation display is shown at the top of the monitor screen. This area indicate s the date, time, pi cture qu ality a nd o ther infor mation needed for operation . * The above i s an exam ple dis[...]

PREPARING FOR USE 1 English 19 1 Press the [EXIT/OSD] but ton. Each time the [EXIT/OSD ] button is press ed, the oper ation display m oves to a dif ferent locat ion or is hidde n. The langu age disp layed on the m onitor ca n be change d. [Settings] (  in dicates defau lt setting) 1 Press the [ MENU] button. The MEN U indicator lights up and th [...]

20 English PREPARING FOR USE 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 3 Turn the jog dial to sel ect “1.LANGUAGE/CLOCK SET” and then turn t he shuttle dial clockwise. The <LANGUAGE/LA NGUE/SPRACHE/IDIOMA> sc reen is displayed . 4 Turn the shuttl e dial clockwise. “ENGLISH ” flashes . [...]

PREPARING FOR USE 1 English 21 4 Turn the jog dial to s elect “01” and then turn t he shuttle dial clockwise. “01” flash es (indica ting the da y). 5 Turn the jog dial to s elect “26” and then turn t he shuttle dial clockwise. The day is se t to “26” and the month “01” flashes. 6 Use the same procedure to set th e month (01) , y[...]

22 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 2 MONITORING VIDEO FROM A CAMERA Exa mple : Se lec tin g Cam e ra 2 1 Press the No. 2 [CAMERA SELECT] button. The CAME RA SELECT ind icator lights up an d video from Camera 2 i s displaye d on a full scree n. 1 Press the [ZOOM] button duri ng monito[...]

MONITORING VIDEO FROM A CAMERA 2 English 23 4 Press the [ZOOM] button to ret urn to normal magnif icatio n. Magnifica tion is cancel led and the d isplay returns to the normal scr een. The ZOOM indicator turns off. z Magnif ied video has a slightly co arser app earance when comp ared with no rmal vide o. z Image s cannot be enlarged i n multi-sc re[...]

24 English MONITORING VIDEO FROM A CAMERA 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 Press the [MULTI] butt on. The MULT I indicato r lights up and vi deo from 16 separat e camera s is displa yed simu ltaneous ly. Press t he [MULT I] button agai n to displa y multi 9 scr eens. The DS R-5709P can on[...]

MONITORING VIDEO FROM A CAMERA 2 English 25 The camer a video on a full screen ca n be change d automa tically bas ed on the ca mera numb er. 1 Press the [SEQUENCE] button. The SEQUEN CE indi cator flashe s and the disp layed vide o changes au tomat ically based on the cam era num ber. The cu rren t cam era num ber in dica tor l ight s sequ enti al[...]

26 English MONITORING VIDEO FROM A CAMERA 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION If yo u connect a monit or to the MON2 output termi nal on the rear pane l of the digital vi deo recor der, you can view vide o in quad-scr een and al low the scre en to chang e autom atically regardles s of the disp[...]

MONITORING VIDEO FROM A CAMERA 2 English 27 2 Press the [SEQUENCE] button. The vid eo dis played on moni tor 2 c hange s auto maticall y. Press the [SE QUENCE ] button onc e again to cancel automatic selection. Even if t he [CAMERA SELECT] or [QUAD] button are pressed, au tomat ic selectio n is cance lled. 2 Pres s the [Q UAD ] butto n. The vide o [...]

28 English MONITORING VIDEO FROM A CAMERA 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 2 Set “MON.2 DI SPLAY” from the <ALARM OPERATION SET> screen to “SWITCH”, “LAST” or “FIR ST”. ( J P.108) When a n alarm occ urs, the cor respond ing video is di splaye d in full scree n on monit[...]

English 29 3 RECORD ING Use the foll owing pro cedure to re cord mo nitored vide o. z Be sur e to s et the tim e w he n u sin g t he d ig ita l v ideo recorder for the fi rst time. Re cording is not possible unt il the time i s set. ( J P.20) 1 Press the [REC/STOP] butt on. The REC/STOP indicator lights up, “REC” (i.e., the recording symbol) ap[...]

RECORDING 3 30 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing pro cedure to re cord alarm video wh en an alarm signa l is detect ed. 1 Set alarm recor ding. ( J P.98) 2 When an alarm signal is detected z When a n al arm sig nal i s de tect ed, “ ALAR M” f lash es i n th e ope[...]

RECORDING 3 English 31 You can book mark any video ima ges while re cording so t hat you may e asil y s earch for th em af terw ard for p lay back fro m the bookm ark list. ( J P.84) Bookmar king can be pe rformed on full, quad an d multi screens. 1 Press the [MARK/COPY] button whil e recording vide o. The “BOOK MARK SUCC ESS!” messa ge is dis [...]

32 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 PLAY Use the follow ing proce dure to play normal or timer recor ding video s tored in the har d disk. 1 Press the [ CAMERA SELECT] button for the camera to play and then press the [PLAY/STOP] but ton. The PLAY/ST OP indicato r lights up and appe [...]

PLA Y 4 English 33 (3) Returning to normal play back. Press the [SHUTTLE HOLD] button while the SHUTTL E HOLD indic ator is lit to release t he lock stat us. is displa yed in the oper ation displ ay area when the jog dial is turn ed. z Audio is not played durin g fast-for ward, fast -rewind, slow, revers e-slow an d reverse pl ayback. (1) Perf ormi[...]

34 English PLA Y 4 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Press the [ZOOM] button to ret urn to normal magnif icatio n. Magnifica tion is cancel led and the d isplay returns to the normal scr een. The ZOOM indicator turns off. z Magnif ied video has a slightly co arser app earance when comp ared [...]

PLA Y 4 English 35 When re cording video fro m a num ber of di fferent cameras, the followin g procedu res can be us ed to play th e recorded vi deo in m ult i-s cre en form a t. 1 Press the [QUAD] button duri ng playback. The QUA D indicato r lights up and video from fo ur separa te camera s is disp layed sim ultane ously. 2 To view vi deo from ot[...]

36 English PLA Y 4 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 Press the [P LUS] butt on during pl aying video on ful l, quad , multi 9 or multi 16 screen s. On the DSR- 5709P , press the bu tton on full , quad or mult i 9 screens. The PLUS in dicat or li ghts u p and one camera ima ge is enl arg ed. [...]

English 37 5 SEARCHING FOR RECORDED V IDEO Video store d in the reco rding area or ar chive area c an be located by se arch ing and then p layed bac k. Use one of six search m ethods to l ocate the re quired vid eo. <SEARCH> screen z During playback , use the shutt le dial, jog dial or operat ion buttons t o perform operation s, such as to pa[...]

38 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION (7) BOOKMARK SEARCH ( J P.42) Bookmar ked video ca n be sel ecte d from the bo okmar k lis t for playba ck. (The [BOOKMARK SEARCH] function is av ailable o nly on the digital v ideo rec order, and it cannot be used th[...]

SEARCHING FOR RECORDED VIDE O 5 English 39 6 Turn the jog dial to sel ect “SEARCH” and then turn th e shuttle dial clockwise. “ALARM ” flashes . 7 Turn the jog dial to sel ect “ALARM” or “THUMBNAIL” and then turn the shut tle dial cl ockwise. Now perf orm al ar m sear ch ( J P.39) or alarm thumbn ail sear ch ( J P.42). [Se ttin gs] [...]

40 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 3 Turn the jog dial to sel ect the video for playback f rom the li st. A preview o f the selected alarm video is displaye d in the preview screen. In thi s case, the vi deo at the t ime the alar m occurre d is display[...]

SEARCHING FOR RECORDED VIDE O 5 English 41 4 Turn the shuttl e dial clockwise. The alarm vi deo with th e specifie d number is displayed in the preview screen . Image nu mbers befo re the selected numbe r are displayed in a list on the left of the screen. 5 Press the [FUNC.] butt on. The curso r moves to t he li st. 6 Turn the jog dial to sel ect t[...]

42 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Press the [FUNC.] butt on. The curso r moves to t he li st. 5 Turn the jog dial to sel ect the alarm video for playback and then t urn the shuttle di al clockwise. 1 Press the [ALARM] button duri ng playback. z Each[...]

SEARCHING FOR RECORDED VIDE O 5 English 43 3 Turn the jog dial to sel ect the video for playback. The alar m num ber for the sele cted vid eo f lash es. z To display the next or prev ious rec ording Turn t he jog dial clockwise or co unter- clockwise accord ingly. z Press the [ALARM ] button to di splay the ne xt nine record ings, and fo r the prev[...]

44 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 In the search screen, press the [FUNC.] button and select “CHANNEL” with th e jog dial. 2 Turn the shuttl e dial clockwise. The “CHANN EL” input fie ld flashes . 3 Press the [CAMERA SELECT] button for the ca[...]

SEARCHING FOR RECORDED VIDE O 5 English 45 3 Turn the shuttl e dial clockwise while “CHANNEL” is selected. The “CHANN EL” input fie ld flashes . 4 Press the [CAMERA SELECT] 5 button. The cu rsor move s to “ DATE TIME”. 5 Specify the date and ti me. (1) Tur n the shuttle di al clockwi se and turn t he jog dial to “2 6” (day). (2) Tur[...]

46 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing pro cedure to pl ayback vid eo that ha s been stored in the ar chive ar ea. 1 Press the [SEARCH] button whil e the digital video recor der is recording or stopped. The SEARCH indicator lig hts up an[...]

SEARCHING FOR RECORDED VIDE O 5 English 47 1 In the search screen, press the [FUNC.] button and select “SEARCH”. The cursor moves to “SEARCH”. z When the cursor is positioned on “SEARCH”, turn the jog dial to mo ve the curs or to “CHANNEL”. 2 Turn the shuttl e dial clockwise. The “SEARCH” input field flashes. 3 Turn the jog dial[...]

48 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 3 Turn the shuttl e dial clockwise. “SEARCH FROM” input fi eld flashes. [Se ttin gs] (  indi cates de fault setting ) *1 “ARCHIVE” can only be selected when “MODE” in “ARCHIVE AREA” in the <RECOR[...]

SEARCHING FOR RECORDED VIDE O 5 English 49 (3) Tur n the jog dial to set the end date and time fo r motion sensing (i .e., 8 PM on th e same day) and then turn the shuttl e dial clockw ise. The cursor moves to “MOTION S ENSOR”. 2 Turn the shuttl e dial clockwise. The mo tion sen sor se tting s creen i s displ ayed. Use the followin g proce dure[...]

50 English SEARCHING FOR RECORDED VIDE O 5 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 Turn the jog dial to sel ect “PREVIEW”. 7 Turn the shuttl e dial clockwise. Each time the shuttle di al is tu rned clockwise, a different motion se nsor scre en is display ed on the preview scr een.  If “NO[...]

SEARCHING FOR RECORDED VIDE O 5 English 51 3 Turn the jog dial to sel ect the video for playback f rom the li st. The selec ted image is displayed on the preview screen. z To display the next or prev ious scr een Turn t he jog dial clockwise or co unter- clockwise accord ingly. z Press the [ALARM ] button to di splay the ne xt eight record ings, an[...]

52 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 SAVING (COPYING) RECORD ED VIDEO Use the pro cedures described be low to cop y import ant normal , timer or ala rm record ings to the digital video re corder ’s archive ar ea, a USB memory, a CD-R/RW or a DVD+R/+RW. Copying vide o to the h ard d[...]

SAVING (COPYI NG ) RECORDED VIDE O 6 English 53 Example: Copying 1 0 seconds of vid eo 1 Play vide o to be copi ed. 2 Press the [STI LL] button when the fr ame to be copied is displaye d. 3 Press the [MARK/COPY] button. The COPY ind icat or l igh ts u p an d th e copy set tin g sc reen is displayed . “ARC HIV E ARE A” i s disp layed for “C OP[...]

54 English SAVING (COPYI NG ) RECORDED VIDE O 6 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 8 Specify t he channel t o copy You can copy video from multiple c hanne ls at t he sam e tim e. Use the [CAME RA SELECT] but ton on the fron t panel to specify th e channel (s) you wan t to copy. The spe cifi ed[...]

SAVING (COPYI NG ) RECORDED VIDE O 6 English 55 4 Press the [MARK/COPY] button. The COPY ind icat or l igh ts u p an d th e copy set tin g sc reen is displayed . 5 Turn the shuttl e dial clockwise. “ARCHIVE AREA” flashes. 6 Turn the jog dial to sel ect “USB MEMORY” and then turn t he shuttle dial clockwise. The curso r move s to “ UNIT”[...]

56 English SAVING (COPYI NG ) RECORDED VIDE O 6 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 9 Turn the shuttl e dial clockwise. “1” fla she s. 10 Turn the jog dial to s elect “20” and then turn t he shuttle dial clockwise. The cursor moves to “CO PY START”. 11 Specify t he channel t o copy Y[...]

SAVING (COPYI NG ) RECORDED VIDE O 6 English 57 Use the f ollowing procedure t o copy r ecordi ng area o r archive area video to a CD-R/RW or DVD+R/+RW. Exam ple: Copy ing the ma ximum vide o to the c opy destination z For compatibili ty, refer to the SANYO homepage. http://ww w.san yosec urity.com / 1 Connect a r ecordable CD or DVD driv e and ins[...]

58 English SAVING (COPYI NG ) RECORDED VIDE O 6 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 8 Turn the jog dial to sel ect “MAXIMUM” and then turn th e shuttle dial clockwise. The cursor moves to “CO PY START”. [Se ttin gs] (  indi cates de fault setting ) z An even t mea ns a cont inu ous r [...]

SAVING (COPYI NG ) RECORDED VIDE O 6 English 59 11 Turn the shuttl e dial clockwise. The numb er o f ima ges f las hes . 12 Turn the jog dial to set the number of discs to copy, a nd turn the shuttle di al clockwise. The cur sor app ears on “FINA LIZE”. 13 Set “ON/OFF” for the “FINALIZE” process, a nd then turn the shutt le dial clockwi[...]

60 English SAVING (COPYI NG ) RECORDED VIDE O 6 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 15 Turn the shuttl e dial clockwise. Copyi ng begi ns. Th e mess age “ COMPOSING IMAGE DATA! ” , then “ COPY TO DISC WRITE R ” is disp laye d on s cree n dur ing copyi ng. Wh en “COPY TO DISC W RITE R &[...]

SAVING (COPYI NG ) RECORDED VIDE O 6 English 61 It is possible to f ormat a USB memory, CD-RW or DVD+RW. 1 Insert a USB memory, CD-RW or DVD+RW. 2 Press the [MARK/COPY] button. The COPY ind icat or l igh ts u p an d th e copy set tin g sc reen is displayed . 3 Turn the jog dial to sel ect “FORMAT/ ERASE” and then turn the shuttle dial clockwise[...]

62 English SAVING (COPYI NG ) RECORDED VIDE O 6 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1. The first lay er consists of a si ngle folder nam ed “SANYO ”, unde r w hich a num ber o f se ssio n-sp ecif ic fol ders are created as the seco nd layer. 2. The seco nd layer con sists of a nu mber of ses[...]

English 63 MENU CONFIGURATION AND OPERATIONS This secti on describe s the men u configur ation and t he menu items to be sel ected for each opera tion. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect a function. Example: “2.RECORD SET” The cu rsor move s. 3 Turn the[...]

64 English MENU CONFIGURATION AND OPERATIONS INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the jog d ial and shutt le dial t o mo ve thr ough t he sub- menus an d setting sc reens and to confirm t he settin gs. Use the f ollowin g proced ure to restore o nly those items i n the displayed setting sc re[...]

MENU CONFIGURATION AND OPERATIONS English 65 The foll owing s ettings can be made with the s ub-men us. Pr ess t he [M ENU] but ton i n an y sub -menu to s cro ll t hrou gh t he su b-men us. 1. INITIAL SET ( J P.66) Sets displ ay language, time, t itle, holi day, ti me period and ot her setting s. 2. RECORD SET ( J P.76) Sets the basi c record ing [...]

66 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 INITIAL SET The following settings can be made w ith <INITIAL SET>. 1. LANGUAGE/CLOCK SET Sets the lan guage dis play ed on th e mo nitor . ( J P.19) Sets the d ate and time displayed on the norm al screen an d summe r time. ( J P.20, 67) Au[...]

INIT IA L SE T 1 English 67 Sets the lan guage displ ayed on th e monitor. ( J P.19 ) Set the time a nd date of the digital video r ecorder. ( J P.20) Set the start a nd end date and time for su mmer tim e. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “1.INITIAL SE[...]

68 English INIT IA L SE T 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 7 Set the date and time. Exampl e: Se t the summer time to begin at 25 Ma rch, 2 007, 0 2:00. Set the summer ti me to en d 28 Oc tober, 2 007, 0 2:00. The cloc k di spla y jum ps f orwa rd o ne ho ur fr om 25 Mar ch, 2007, 0 1:59 to[...]

INIT IA L SE T 1 English 69 5 Turn the jog dial to sel ect “ADJUST. TIME” under <EXT. CLOCK SET> an d then turn the shutt le dial clockwise. “OFF” (defau lt setting ) flashes. 6 Turn the jog dial to sel ect the time and then turn the shutt le dial clockwise. Example: Se t to 05:00. 7 Press the [EXIT/OSD] but ton. The settin g procedu [...]

70 English INIT IA L SE T 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Turn the jog dial to sel ect “YES” and then turn the shutt le dial clockwise. Connec ted camer as are auto maticall y detected . When detection is completed, the display returns to the <INITIAL SET> screen. 5 Press the [[...]

INIT IA L SE T 1 English 71 6 Turn the jog dial to sel ect “H”. Characte rs cha nge in the follow ing seq uence as the jog d ial is turned. 7 Turn the shuttl e dial clockwise. The charact er is set and the curso r moves one position to the righ t. z When ch anging a ch aracte r in the title, mo ve the cur sor to that char acter by turning the s[...]

72 English INIT IA L SE T 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Set the day and month for item 1. (1) Tur n the shuttle di al clockwi se. “--” (day) fla shes. (2) Tur n the jog dial to sel ect “26” an d then turn the s huttle dial cl ockwi se. “--” (mont h) flashes. (3) Tur n the j[...]

INIT IA L SE T 1 English 73 The above ex ample s are set as follow s. <TIME PERIOD SET> sc reen z TIME PERIOD A T-1=6:00, T-2=13:00 , T-3=20:00 , T-4=00 :00 z TIME PERIOD B T-1=6:00, T-2=11:00 , T-3=13:00 , T-4=00 :00 z SEQUENCE “TIME PERIOD A” z MASK “TIME PERIOD B” <MAIN/MON.2 MONITOR SET> screen z T-1 All “OFF” z T-2 “O[...]

74 English INIT IA L SE T 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Example 1: Setting periods using TIME PERIOD A and TIME PERIOD B z TIME PERIOD A T-1=6:00 T-2=11:30 T-3=13:30 T-4=18:00 z TIME PERIOD B T-1=6:00 T-2=8:00 T-3=14:30 T-4=20:00 1 Press the [MENU] button. The MENU indicator lights up an[...]

INIT IA L SE T 1 English 75 Example 2: Se tting time period operat ion as follow s. Automatic selection and monit or masking for “TIME PERIOD A”. (default setting) Motion sensing for “TIME PE RIOD B”. 9 Turn the jog dial to sel ect “MOTION SENSOR” within “SELECT TIME PERIOD” and then turn the shuttl e dial clockwise. “TIME PERIOD [...]

76 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 2 RECORD SET The following settings can be made w ith <RECORD SET>. 1. NORMAL REC EASY SET ( J P.77) Makes ba sic setti ngs based on a num ber of days or a rec ording rate. 2. RECORDING AREA SET ( J P.82 ) Displays t he total capacity of th e [...]

RECORD SET 2 English 77 8. ALARM OPERATION SET ( J P.108) Makes se ttings for operation and display upo n detectin g an alarm. Use the foll owing pro cedure to m ake simpl e record ing set ti ngs. T wo di ffe rent set tin g met hods may be us ed -- one based on re cording days, the ot her based on recordin g rate. z When eas y setup se ttings and i[...]

78 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 Turn the jog dial to sel ect the “RECORDING DURATION” setting and then turn the shutt le dial clockwise. The cursor mo ves to “TIMER RECORDING ( DLY)”. 7 Turn the shuttl e dial clockwise. “OFF ” flash es. 8 To activat e ti[...]

RECORD SET 2 English 79 13 Turn the jog dial to sel ect “ON” or “OFF” an d then turn the shuttl e dial clockwise. Exam pl e: ON [Se ttin gs] (  indi cates de fault setting ) (For rec ording ra tes that do not su pport a udio recor ding, “- -” is displayed .) z Audio reco rding ca n only be spe cified whe n the reco rding rate is 1 FP[...]

80 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Turn the jog dial to sel ect “REC RATE BASE” and then turn the shuttl e dial clockwise. The <REC RATE B ASE> screen is displayed . The nu mber of det ecte d camer as is i ndi cated by “NUMB ER OF CAMERAS”. z Confirm that[...]

RECORD SET 2 English 81 9 Set the time for timer recording. Example: Timer recording f rom 8 AM to 8 PM (1) Tur n the shuttle di al clockwi se and then t urn the jog dia l to sel ect “08” (hour). (2) Tur n the shuttle di al clockwi se and then t urn the jog dia l to select “00” (minut es). (3) Tur n the shuttle di al clockwi se and then t u[...]

82 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 16 Press the [EXIT/OSD] but ton. The sett ing is c omple ted and the d isp lay r etur ns t o the norm al screen. z The reco rding durat ion is autom atically ca lculate d based on recor ding sett ings and the nu mber of con nected camer[...]

RECORD SET 2 English 83  Default hard disk settings  Recordin g area allo cations The maximu m allocati on for th e record ing area i s 99%. The allocat ion for the ar chive area ca nnot be se t manuall y. When the recording area is modi fied, the ar chive area i s aut omat ical ly r econf ig ured ( mini mum of 1%). Example: Se tting the re c[...]

84 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 7 Turn the shuttl e dial clockwise. After the har d disk is initia lized, the <RECORD SET> screen appears an d the new re cordin g capacity se tting is appl ied. 8 Press the [EXIT/OSD] but ton. The sett ing is c omple ted and the [...]

RECORD SET 2 English 85 z When “AREA FULL RESE T” is performed for “RECORD ING AREA”, the recordi ngs in the recording area are over written. z When “AREA FULL RESET” is performed for “ARCHIVE AREA ”, t he re cor di ngs i n th e ar chiv e ar ea ar e de let ed. Use the fol lowi ng pr oced ure to s et w heth er t o ov erwr ite the old[...]

86 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 7 Turn the jog dial to sel ect the mode value and then tu rn the shuttle dial clockwise. When “AUTO ALARM COPY” is selected, the <WARNING> screen is di splayed . [Se ttin gs] (  indi cates de fault setting ) When “AUTO AL[...]

RECORD SET 2 English 87 z The archive a rea cannot be automatically o verwritten. Set overwrite per mission ( J P.84) whe n the record ing area is full. Use the fo llowing proc edure to set the stor age period f or record ed data. When th e set period has expired , the corres ponding data cannot be played ba ck. 1 Press the [ MENU] button. The MEN [...]

88 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 5 Turn the jog dial to sel ect the storage period for the dat a and then turn the shuttle di al clockwise. Set the st orage p eriod fo r recorde d data to “OFF” or within the ra nge of “1 DAY - 99 D AYS” (ful l d ays) . 6 Press [...]

RECORD SET 2 English 89  Setting t he pict ure qualit y for each camera (1) Sel ect “INDIV.” and turn the sh uttle dial clo ckwise. The cursor moves to “PICTURE QUALITY SET”. (2) Tur n the shuttle di al clockwi se. The <PICT URE QUALITY SET> scree n is displayed. On the D SR-570 9P, camer as No. 01-0 9 are disp layed. (3) Tur n the[...]

90 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION z When onl y one cam era is conne cted, r ecording i s performed at 25 FPS even if 50 or 100 FPS is set. z When fo ur camera s are conne cted and 10 0 FPS is set , record ing is perform ed at the recordi ng rate clos e to the set rate ([...]

RECORD SET 2 English 91 3 Turn the jog dial to select “5.PROGRAM REC SET” and then turn th e shuttle dial clockwise. The <PROGRAM RE C SET> s creen is displayed. 4 Turn the shuttl e dial clockwise. “P-1” flas he s for “P ROG RA M”. 5 Turn the jog dial to sel ect a “PROGRAM” number (for example, P- 1) and then turn th e shuttle[...]

92 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the followi ng pro cedures to s et recor ding s tart an d stop ti mes usi ng th e time r func tio n. Timer sett ing items can be u sed to set ti mes at which to start and stop re cording an d the reco rding rate on each spec ified d[...]

RECORD SET 2 English 93 5 Turn th e jog dial to set the day, and turn the shuttle dial clockwise. “--” (indicat ing the hour ) from “ST ART” flashe s. 6 Setting the “START” and “STOP” time. Example: Se tting a start time of 6:30 PM and an end time of 11:15 PM (1) Tur n the jog dial an d set “18” (ind icating the ho ur), and turn[...]

94 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 10 Use the same procedure to set ot her items.  To change a setting item Turn the shut tle dial to sel ect the item to be change d and then turn the jog dial to change the s etting. 11 Press the [EXIT/OSD] but ton. The sett ing is c [...]

RECORD SET 2 English 95 Use the f ollowing p rocedur es to set time r recor dings sp anning more than 24 hours. Perfor m in line 7 (defau lt: “SAT” ) and line 8 (default: “D LY”) of the <TI MER SET> scr een. Exam ple: A Pro gram No. 1 t imer recording from 1 0:30 AM on Monday t o 8:30 PM on Wed nesday with a record ing rate of 5 FPS 1[...]

96 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 7 Set “WEEK” and “STOP” to stop recording and make th e settings for “FPS” and “SET” . (1) Tur n the jog di al to select “WED ” and then t urn the sh uttle dial cl ockwi se. (2) Tur n the jog dial to sel ect “20”[...]

RECORD SET 2 English 97 5 Turn the jog dial to sel ect line 9 (EXT) and then turn th e shuttle dial clockwise. “OFF ” flash es. 6 Turn the jog dial to sel ect “OFF” and then turn the shutt le dial clockwise. “12.5” f lashes . 7 Turn the jog dial to sel ect “5” and then turn t he shuttle dial clockwise. “OFF ” flash es. 8 Turn th[...]

98 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the follo wing procedu re to select the picture qual ity, audio reco rding and record ing rate for alarm rec ording. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dia[...]

RECORD SET 2 English 99 7 Turn the jog dia l to select the “PICTURE QUALITY” setting and then tur n the shuttle di al clockwise. The cursor mo ves to “AUDIO RECORDING”. [Se ttin gs] (  indi cates de fault setting )  Setting t he pict ure qualit y for each camera (1) Sel ect “INDIV.” and turn the sh uttle dial clo ckwise. The curso[...]

100 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 10 Turn the shuttl e dial clockwise. “ONL Y” flas hes . 11 Turn the jog dial to sel ect the “ALARM INTERLEAVE” setti ng and then turn the shuttle di al clockwise. The cursor moves to “REC RATE/DURATION”. [Se ttin gs] (  [...]

RECORD SET 2 English 101 z When onl y one cam era is conne cted, r ecording i s per form ed at 25 FPS eve n if 50 FP S is set . z Assu ming that t wo or mor e camer as ar e conne cted and “ALARM INTERLEAVE” is set to “ALL”, wh en 50 FPS is set, the ac tual recor ding rate is roughly the recording r ate divided by the numb er of camer as. (E[...]

102 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing proce dure to se t the record ing rate an d time . z Settings cannot b e made for “P RE-ALARM RECORDING” when “ALARM REC” is set to “OFF”. 1 Press the [MENU] button. The MENU indicator lights up and the &[...]

RECORD SET 2 English 103 7 Turn the jog dial to sel ect the “REC RATE” setti ng and then turn the shut tle dial cl ockwise. [Se ttin gs] (  indi cates de fault setting ) Refer to “Table of pre-alarm re cording ti mes” ( J P.224) w hen setti ng. z When m irro ri ng is set to “ON ”, co nfi gurab le r ecor ding rat es are limited . z Wh[...]

104 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use this se tting to indic ate how al arms are to be de tected . 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “2.RECORD SET” and then turn the shutt[...]

RECORD SET 2 English 105 Use the foll owing pro cedure to se t motion sensors on video from ea ch c amera so th at alarms can be de tected. (1) Motion senso r setting Display chang es in response to th e sensor conditi on. Settings are made using the jog di al. -: Sens or off A or B: Sensor on (2) Camer a number displa y Change s when a [CAMER A SE[...]

106 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 Press a [CAMERA SELECT] button. Press the but ton of the nu mber of the cam era for which moti on sen sor s are t o be set up. - On the DSR- 5709P, pres s the [CAMER A SELE CT] 1-9 button. 7 Turn the jog dial to move the cursor (reve[...]

RECORD SET 2 English 107 13 Turn the shuttl e dial clockwise. “OFF ” flash es. 14 Turn the jog dial to sel ect “OFF” or a sensitiv ity level between “1” to “10” and then turn the shutt le dial clockwise. The cursor moves to “MODE”. [Se ttin gs] (  indi cates de fault setting ) 15 Turn the shuttl e dial clockwise. “A” flas[...]

108 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION  To stop motion sensor r ecording Press the [MENU] button and select “2.RECORD S ET”, “7. ALARM REC MODE SET” , and “MOTION SENSOR” a nd when the m otion sens or settings sc reen appe ars set “ LEVEL” to “ OFF ”.[...]

RECORD SET 2 English 109 [Se ttin gs] (  indi cates de fault setting ) 6 Turn the shuttl e dial clockwise. “FULL” flas hes. 7 Turn the jog dial to sel ect the “MAIN MON. DISPLAY” set ting and t hen turn the shuttle dial clockwise. The cursor moves to “ALARM PRIORITY”. [Settings] (  in dicates defau lt setting) *1 Mu lti scr een di[...]

110 English RECORD SET 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION z After an alar m durati on has ended , the display return s to the screen prior to the al arm. z “ALAR M PRIOR ITY” cannot be se lected when “ MAIN MON. DISPLAY” is set to “9”, “ 16” or “NC”. 10 Turn the shuttl e d[...]

English 111 3 GENERAL SET The following settings can be made w ith <GENERAL SET> . 1. DISPLAY SET ( J P.112) Specifies information dis play ed on th e mo nitor and outpu t of the cont rol terminal (OUTPUT1/2). 2. BUZZER SET ( J P .114) Turns the buz zer on or off . 3. SECURITY LOCK SET ( J P.115) Sets the k ey lock, passwo rd lock and ot her [...]

112 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION You can det ermine whe ther or no t to display the i nformati on includin g date and time on the mo nitor. The def ault setti ng is “ON” fo r every ite m. Specify “ OFF” acc ording to necessit y. 1 Press the [MENU] button. The[...]

GENERAL SET 3 English 113 z A maximu m of 9,999 ,999 alarms can be displa yed in the operat ion display. When th is number is ex ceeded, the alarm co unt return s to 000000 0. z When “ALARM RECORDING” is set to “ OFF” on the <ALARM REC MO DE SET > screen , the numbe r of alar ms and type of alarm reco rding are no t displaye d. z Whe [...]

114 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the f ollowin g proced ure to set a war ning buzz er to s ound for alarms or when hard di sk space becomes insuffici ent. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the [...]

GENERAL SET 3 English 115 Use the foll owing proce dure to re strict oper ation of the digi tal video recor der based on the user level. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “3.GENERAL SET” and then turn the shuttl e dial clockwise. The <GENERA L SET&g[...]

116 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 7 Turn the jog di al to select “OPERATION AUTHORITY” and then turn the shuttl e dial cl ockwise. “NORMA L” flas hes. 8 Turn the jog dia l to select “NORMAL” or “CHANGE” and then turn the shuttle dial cl ockwise. If no [...]

GENERAL SET 3 English 117 12 Turn the jog dial to sel ect the camera contro l level and then turn the shutt le dial cl ockwise. The curs or move s to “USE R ID SET”. [Se ttin gs] (  indi cates de fault setting ) 13 Press the [EXIT/OSD] but ton. The sett ing is c omple ted and the d isp lay r etur ns t o the norm al screen. Set a user ID and [...]

118 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 5 Turn the shuttl e dial clockwise. The firs t user I D en try bar “|” flas hes. 6 Enter a user ID. Use the jog di al, shuttle dia l or [CAMERA SELEC T] buttons to enter up to eigh t alphan umeric ch aracte rs. Refer to “Se ttin[...]

GENERAL SET 3 English 119 z The lock cannot be a ctivated dur ing the follow ing operat ions. • Wh ile displ aying the m enu scree n, searc h screen, or copy scr een • Wh ile playi ng back rec orded ima ge • While camera is b eing contro lled • While video is being ma gnified 2 Confirm the l ock status. If an y oper ati on is mad e othe r t[...]

120 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Settings are r equired whe n the RS-485 termina ls (A and B) are connec ted with a sy stem co ntroller or other devic es. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog [...]

GENERAL SET 3 English 121 8 Turn the shuttl e dial clockwise. “OF F” fl ashe s f or “ ALARM INFO ”. 9 Turn the jog dial to sel ect “ALARM INFO” setting and then t urn the shuttle dial cl ockwise. The curso r moves to “ ADDRESS” . [Se ttin gs] (  indi cates de fault setting ) 10 Turn the shuttl e dial clockwise. “001” f lashes[...]

122 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION This secti on describe s how to initialize the ha rd disk an d perform mirr oring. The interna l hard disk capa city is displa yed as DI SK 1 and DISK 2; the h ard disk cap acity for the expans ion un it is displayed as EX-DISK 1 to 4[...]

GENERAL SET 3 English 123 3 Turn the jog dial to sel ect “5.HDD SET” and then turn th e shuttle dial clockwise. The <HDD SET> screen is displayed. 4 Turn the jog dial to select “MIRRORING” and then turn th e shuttle dial clockwise. “OFF ” flash es. 5 Turn the jog dial to sel ect “ON” and then turn the shutt le dial clockwise. [...]

124 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION When mi rroring is s et to “ON” a nd a recordin g error occu rs, change th e hard disk us ed for playb ack. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to se[...]

GENERAL SET 3 English 125 Use the fo llowing procedu re to make menu se ttings for t he digital video r ecorder and to moni tor video fro m a PC via a network (LAN). A LAN cable m ust be con nected to th e LAN termi nal on the rear pane l before proce eding. z Conne cting to a PC dir ectly (without using a swi tch) z Conne cting to an int ranet (us[...]

126 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “3.GENERAL SET” and then turn the shuttl e dial clockwise. The <GENERA L SET> screen is disp lay[...]

GENERAL SET 3 English 127 9 Set “PORT”. (Def aul t se tti ng: 00080 ) (1) Tur n the shuttle di al cloc kwi se. (2) Tur n the jog dial to sele ct th e se tti ng an d the n tu rn th e shu ttl e dial cl ockwi se. 10 Turn the shuttl e dial clockwise. “NO LIMIT” flashes. 11 Turn the jog dial to sel ect the “NETWORK SPEED” sett ing and the n [...]

128 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 18 Turn the jog dial to sel ect the “MTU SIZE” settin g and then turn the shuttle dial cl ockwise. [Se ttin gs] (  indi cates de fault setting )  1500 (ET HERNE T), 1492 (AD SL-1), 145 4 (ADSL-2) , 1300 (VP N), 57 6 z The sy[...]

GENERAL SET 3 English 129 5 Turn the jog dial to sel ect “ON” or “OFF” an d then turn the shuttl e dial clockwise. The cursor moves to “NETWORK STATUS”. [Se ttin gs] (  indi cates de fault setting ) 6 Turn the shuttl e dial clockwise. “ON” flas hes fo r “N ETW ORK STA TU S”. 7 Turn the jog dial to sel ect “ON” or “OFF?[...]

130 English GENERAL SET 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 11 Turn the jog dia l to select “NORMAL” or “CHANGE” and then turn the shuttle dial cl ockwise. The curso r move s to “ COPY/ DOWNL OAD”. If no changes are to be m ade to user pr ivileges, select “NORMA L” and go to st[...]

GENERAL SET 3 English 131 15 Turn the jog dial to sel ect the camera contro l level and then turn the shutt le dial cl ockwise. Select a lev el to control cam eras from the digital vi deo recor de r. ( J P .117) [Se ttin gs] (  indi cates de fault setting ) 16 Press the [EXIT/OSD] but ton. The sett ing is c omple ted and the d isp lay r etur ns [...]

132 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 SCREEN SET Use the foll owing pro cedure to ch ange the di splay posi tions for camer as in quad a nd multi 9/1 6 screens . Differe nt position s can be set for both the ma in monitor and monito r 2. On the DSR- 5709P , display positions can be c[...]

SCREEN SET 4 English 133 6 Turn the jog dial to sel ect “01” for “QUAD1” and then turn the shuttl e dial clockwise. “01” fla shes for “QUAD1”. 7 Turn the jog dial to s elect “05” and then turn t he shuttle dial clockwise. “01” chan ges to “05” for “QUAD1”. z The posi tion of camer a images on monitor 2 can be changed[...]

134 English SCREEN SET 4 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing pro cedure to sc roll throug h video from all camera s at a specif ied interval. The i nte rval f or aut omat ic sel ect ion ca n only be set for full screen an d quad disp lay. Example: Au tomatic sw itching of the [...]

SCREEN SET 4 English 135 3 Turn the jog dial to sel ect “4.SCREEN SET” and then turn the shuttl e dial clockwise. The <S CRE EN SET> sc ree n is di spla yed. 4 Turn the jog dial to sel ect “FULL” for “2.SEQUENCE SET” and then turn the shuttle di al clockwise. “1S” fl ashes for “FULL”. 5 Turn the jog dial to set the interva[...]

136 English SCREEN SET 4 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 10 Turn the jog dia l to select “1S” to “30S” or “OF F” and then t urn th e shuttle dial clockwise. After conf irming this se tting, the cu rsor moves one positio n to the right. [Se ttin gs] (  indi cates de fault setti[...]

SCREEN SET 4 English 137 5 Turn the jog dial to sel ect “ON” and then turn the shutt le dial clockwise. The cursor moves to “MA SK SET”. 6 Turn the shuttl e dial clockwise. The <MASK SE T> screen is displaye d. 7 Turn the shuttl e dial clockwise. “T-1” f lashes f or “TIME PER IOD”. 8 Turn the jog dial to sel ect the time perio[...]

138 English SCREEN SET 4 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 12 Press the [EXIT/OSD] but ton. The sett ing is c omple ted and the d isp lay r etur ns t o the norm al screen. z When s ett ing a num ber of t ime pe ri ods t oget her , af ter complet ing step 10, use the jog di al to select the nex[...]

English 139 5 POWER LOSS/USED TIME Use the foll owing proce dure to ch eck the date and time of power los ses, the am ount of hard disk operat ion time and the amount of power-on t ime. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “5.POWER LOSS/USED TIME” and the[...]

140 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 INITIALIZA TION LOG Use the foll owing pro cedure to di splay the ei ght most recent ent ries i n the init ia liz atio n an d re -rec ordi ng l og fo r t he ha rd disk. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU[...]

English 141 7 COPY MENU SETTINGS Use the fol lowi ng pr oced ure to s ave menu set tings or user ID settings on a USB memory or to load settings from a USB memory ba ck onto th e digital vide o recorde r. These functions mak e it easy to s har e th e sam e sett ing s on a nu mber of different dig ital vide o recorders . Al so conne ct to a netw ork[...]

142 English COPY MENU SETTINGS 7 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the fo llowing pr ocedure to load men u setting s saved on a USB memory to th e digital v ideo recorder. z When lo ading a men u setting f ile to the record er, spec ify whether recording area setti ngs are to be co pied. N[...]

COPY MENU SETTINGS 7 English 143 Use the foll owing pro cedure to co py record ing area settings. 1 Press the [MENU] button. The MENU indicator lights up and the <MAIN MENU> is displayed . 2 Turn the jog dial to sel ect “7.COPY MENU SETTINGS” and t hen turn th e shuttle di al clockwise. The <COPY MENU SETTINGS> scree n is displayed.[...]

144 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 8 ADVANCED MENU SET The foll owing settings can be made with <ADVANCED MENU SET>. 1. ROI SET ( J P.145) Set the R egio n of Inte re st (ROI) to enable record ing, at different pi cture qual ity, only of area s preset on the monitor or areas w[...]

ADVANCED MENU S ET 8 English 145 Set the Regi on of Inter est (ROI) to enable recordin g at different picture q ualities, only of a reas pr eset on the moni tor. Enables reco rding at hi gh pictur e qualities for areas wh ere motion is det ected. This function al lows you to raise the quality level for the pres et ROI or lower the quality level for[...]

146 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 Turn the jog dial to sel ect the “QUALITY” setting and then turn the shuttle di al clockwise. The cursor moves to “STATIC ARE A 2”. [Se ttin gs] (  indi cates de fault setting ) 7 Use the same procedure to set th e[...]

ADVANCED MENU S ET 8 English 147 11 Turn the shuttl e dial clockwise. The <AREA SE T> screen is displayed. z When “QUALITY” are all set to “OFF”, th e <AREA SET> screen is no t displ ayed. z The fram e is n ot displ ayed for “STATI C AREA ” num bers wit h “QUA LIT Y” set to “O FF”. 12 Turn the shuttl e dial clockwise[...]

148 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Since the pi cture qual ity you set for eac h area is ref lected directly on the <A REA SE T> screen, yo u can eas ily compare the area of int erest (R OI) with ord inary areas . z The < AREA SET> scre en d ispl ays[...]

ADVANCED MENU S ET 8 English 149 Use the foll owing proce dure to re ceive notif ication by e- mail when an alarm e vent occ urs whi le the digi tal vide o recorder is connect ed to a n etwork. Al arm not ification c annot be set from the digi tal video recor der. Set this on a PC connected to th e network. ( J P. 207) The followi ng section descri[...]

150 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Settings are requir ed when a r emote control camera(s) is connect ed with the digi tal video recorder. Through m aking the c onnection s by followi ng the proce dure below, yo u can cont rol a camer a(s) in the full screen m o[...]

ADVANCED MENU S ET 8 English 151 z “COAX” st ands fo r coaxial control and t he vide o signa l and camer a control s ignal. This r equires no f urther wiri ng for signal co ntrol. 7 Use the same procedure to set th e connection channels of o ther dome cameras. 8 When “2ND RS485/422” is se lected for “PROTOCOL”, turn the j og dial to sel[...]

152 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 11 Turn the jog dial to sel ect “2. ALARM REC TRIGGER SET” and then turn the shuttle di al clockwise. The <ALAMR TRIGG ER SET> scree n is displa yed. On the <ALAR M REC TR IGGER SET> screen, you c an specify t h[...]

ADVANCED MENU S ET 8 English 153 To r egis ter pr eset posi tion s that are ap plie d duri ng cam era cont ro l, f oll ow th ese step s: 1 Press the [FUNC.] butt on ( 1 ). The FUNC. indicato r lights up in blue to in dicate that you a re now in c amera control mode. 2 Set the camera lens orientation. Adj ust the lens to y our desi red orie nta tio [...]

154 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION z Turn t he shu ttle dial during autom atic pa nning, a utoma tic camer a selecti on, or TOUR for manua l panning and turn the jog dia l for manual tilt and to can cel autom atic mod es. z Opera tion is only p ossible fo r one [...]

ADVANCED MENU S ET 8 English 155 6 Turn the s huttle dia l clockwise. “OFF” fl ashes. 7 Turn the j og dial t o select “ON” and then turn the shuttl e dial cl ockwise. The cursor moves to “NTP SERVER ADDRESS”. [Settings] (  in dicates defaul t setting) 8 Set “NTP SERVER ADDRE SS”. (1) Turn the s huttle dial clockwise. (2) Turn the[...]

156 English ADVANCED MENU S ET 8 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 9 Turn the jog dial to sel ect “TIME TO SYNCHRONIZE” and then turn the shuttle di al clockwise. “0 1” fl ashe s. 10 Set “TIME TO SYNCHRONIZE”. Set the t ime to synchr onize. Th e time is synchr onized with th e cloc[...]

[...]

Manual for Remote Operation by Network Connection[...]

English 159 1 GETTING PREPARED The dig ital v ideo reco rder can be remotely contr olled from PCs when the unit i s connec ted to a n etwork. z Menu se ttings, recording , playback, and other si milar oper atio ns ar e poss ibl e from the PC sc reen . z A maxim um of 15 PCs can be s imultane ously co nnected to a single DVR (Di gital Video Recorde [...]

160 English GETTING PREPARE D 1 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION See P.2 11 for i nstalling and o perating D VR Viewer2. After inst alling DV R Vie wer2, u se the f ollowin g proce dure to make the Internet securi ty settings. 1 Select [ Internet Options...] from the Internet Explorer [ Tools[...]

GETTING PREPARE D 1 English 161 Computer: PC/AT compat ible machine Operating system : Windows 98 /98 SE/Me/N T 4.0/2000 /XP Browser: In ternet Explo rer 5.5 SP2 or later Video: 65,0 00 colors, re solution 800 x 600 dpi or high er Recomm ended specific ations CPU: Pentium® 4 (2 GHz) or better RAM: 256 MB minimum Operating system : Windows 20 00, X[...]

162 English INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 2 NETW ORK CONTROL 1 Launch the web browser on the PC. Internet Expl orer 5.5 SP2 or later is suppor ted. These oper ating syst ems are sup ported : Windows 98 , 98 SE, Me, N T 4.0, 2000 an d XP z If no web b rowser is inst alled on th e PC, instal[...]

NETWORK CONTROL 2 English 163 z When the maximum number of PCs ( 15) is connected to the digital video recorder and then an upper-level user accesses the unit from a different PC, t he most recent lower-level user is autom atically disconnected and priority is given to the upper-level user. An error m essage is displ ayed on the PC of the discon ne[...]

164 English NETWORK CONTROL 2 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION  When co ntrol rig hts are sw itched to t he unit Wheneve r the but ton on the ope ratio n screen o f the PC is clicked, access is cancelled a nd contro l rights switc h back to the unit. At the sa me time, the “ NETWOR K CON[...]

English 165 3 OPERA TION PANEL FUNCTI ONS AND RESTRI CTIONS 1. Chann el num ber Displays th e channel number selected us ing “Chan nel selectio n”. The DS R-5709P displa ys only nine c hannel s. 2. Ch an nel se lec tio n ( LV1 /2 /3/4 ) Selects a cam era cha nnel when di splayin g video on a ful l screen. The DS R-5709P displa ys only nine c ha[...]

166 English OPERATION PANEL FUN CTIONS AND RESTRICTIONS 3 INTRODUCTION SETTINGS NETWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Operation is av ailable when a cam era wi th rem ote op eration capability is connected to the VIDEO t erminal, RS-485 ter min al, or 2ND R S485/ 422 t er minal and s ett ings are c arri ed out using ca[...]

OPERATION PANEL FUN CTIONS AND RESTRICTIONS 3 English 167 4. Menu se t Sets th e camera internal m enu item se tting value s. 5. [MENU] Displ ays cam era int ernal m enu s creen. 6. Control speed Adjust s the o peration spee d for P an an d Tilt. Sets a le vel between 1 and 7. High er value s correspon d to faste r operatio n speed. 7. [ZOOM] Activ[...]

168 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 1 RECOR DING IMAGE S Use the followi ng pro cedures to s tore mo nitored image s and alarm imag es on the int ernal hard disk of the digit al video recor de r. Before re cord ing image s, make the necess ary men u settings to ma tch the installat [...]

English 169 2 WATCHING IMAGES Monitor ed live imag es and reco rded imag es can be viewed upon dema nd. Note that sw itchin g to live or playba ck imag es, mod ifying the screen disp lay and ot her simila r operati ons have abs olutely no effect on timer recor ding and a larm reco rding. Click the button o n the P LAYBACK area on the op eration pan[...]

170 English WAT CHI NG IM AGES 2 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the but tons on the op eration pa nel. Cl ick th e but ton. During pla yback, click the or button. : Incr ease s the pl ayba ck sp eed. : Decrea ses the play back sp eed. Cl ick th e but ton. During reverse play back, clic[...]

WAT CHI NG IM AGES 2 English 171 Use the foll owing proce dures to adjust the im ages dis played on screen . To make an a djustme nt, select the adjust ment setti ng from the menu an d then click [ SET] from t he pul l-do wn menu on the scree n. (1) R EA D INT ER VAL (De fa ult se tt ing: 1) Select one of five image dis play spee ds. Larger setting[...]

172 English WAT CHI NG IM AGES 2 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION (5) SAVE TO PC (Default setting: OFF) Set to “ON” to s ave live imag es or playba ck imag es to a PC. * Set onl y for full screen monitorin g. z A user level 2 (LV2) or bette r is required to play back images. z The u ser [...]

WAT CHI NG IM AGES 2 English 173 z To dow nload video with au dio to a PC, DVR Viewer2 must be instal led before the neces sary setting s can be ma de. ( J P.211) z The user level required f or downlo ading image s is set in the user ID and netw ork control setting s. ( J P.197, 1 28) 1 Displays l ive image for users wit h download autho rization. [...]

174 English WAT CHI NG IM AGES 2 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION  To canc el a save o peration Click [CANCEL]. 8 When saving is completed, cli ck [OK] on the pop -up window. The final sti ll image from the save p rocess is di splayed . The setti ng menu closes and the screen r eturns t o[...]

English 175 3 SEARCHING FOR RECORDED V IDEO Record ed video can be searc hed and pla yed back us ing any of six s earch mode s. 1 In live mode (when playback is stopped), cl ick the button on the operation panel . The “SEARCH” screen is d isplayed. 2 Select and click t he desired sear ch mode from the “SEARCH” screen. The screen for the sel[...]

176 English SEARCHING FOR RECORDED VIDE O 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing proce dure to pe rform an alar m sear ch or alarm thu mbnail se arch by de fining the per iod (mon th, week, day or time) of the alarm vi deo. (1) T ER M: P er iod (2 ) Date/ ti me (3) Chan nel nu[...]

SEARCHING FOR RECORDED VIDE O 3 English 177 Images recorded as alarm rec ordings are displayed in a list by alarm nu mbers. Accordin gly, al arm images f rom the r ecordi ng list can be searched and played bac k. (1) NO : Alarm numb er. Click to di splay prev iew (2) DATE/ TIME: The a larm record ing date (3) CH: T he alarm record ing came ra numbe[...]

178 English SEARCHING FOR RECORDED VIDE O 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the foll owing pro cedure to sp ecify the r ecorded date and time and play back the i mages. (1) RECORDING TOP: Displays th e date and time of the olde st re cor ding (2) RE CORDIN G END: Displ ays the da te and[...]

SEARCHING FOR RECORDED VIDE O 3 English 179 Use the foll owing proce dure to de tect variat ions from re cord ed i mages, us ing the motion sen sor , as a re sult of t he presence of an intru der or the like , and to play b ack the corresp onding im ages. (1) SEARCH FROM Recordi ng area to b e used for mo tion detec tion searc hing (2) CHANNEL Chan[...]

180 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 SAVING (COPYING) RECORD ED VIDEO Use the follow ing proce dures to copy recorde d image s to the archive are a on the hard di sk or to dow nload image s to a PC or the lik e. These func tions can be used to sav e important images fr om the recor[...]

SAVING (COPYI NG ) RECORDED VIDE O 4 English 181 6 Specify co py range a s numeric values according to the “UNIT” settings. [Se ttin gs] 7 Specify “ COPY CH”. Check the ch annel( s) you want to copy. Y ou can specif y multiple channels. z ALL: C heck all the c hanne ls. z RESET: Uncheck all the channel s. z The chann el(s) tha t is currentl[...]

182 English SAVING (COPYI NG ) RECORDED VIDE O 4 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 4 Set “UNIT”. [Se ttin gs] (  indi cates de fault setting ) z An even t mea ns a cont inu ous r ecor d (or a rec ord ing un it set by “ DURATION” for t he alarm reco rding). z You can select “ EVEN[...]

English 183 1 SETTINGS Before usin g the digital video recor der, setti ngs shoul d be made for re cording con ditions, installat ion envir onment and other sim ilar factors. The corr esponding m enu ite ms are displayed in a three -level st ructur e compr ising main m enus , sub-me nus and set ting scre ens. ( J P.184 ) 1 Click the button on the o[...]

SETTINGS 1 184 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION * indi cate s the dis play of inf ormat io n only . Menu structure Mai n menu Sub menu Setting items Reference page 1. IN ITIAL SET 1. CLOCK SE T z CLOCK SET P.185 2. SUMME R TIME SET/ EXT.C LOCK SE T z SUMM ER TIME SET z EXT.C LOCK SE [...]

English 185 2 INITIAL SET Use the foll owing proce dure to se t the time and date of the digital video r ecorder . Be sure that the date and time are se t correc tly at thi s time. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “1. INI TIAL SET”. The “INIT IAL SET” scree n is disp layed. 3 Click “1.[...]

186 English INIT IA L SE T 2 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Synchron ized operat ions can not be perfo rmed whe n the clocks on the digita l video recor der and the connect ed periphera l devices di ffer. By set ting the exter nal clock as described here, all de vices con nected t o the cl[...]

English 187 3 RECORD SET The unit’s hard disk is sepa rated int o two indepen dent re cord ing areas. Fur ther mor e, fi ve d iff eren t r ecord ing modes can be used for the se tw o areas . The mem ory capac ity for each ar ea is allocat ed as a percent age. (Setti ng units: 1%) 1 Click the button on the operation pane l. The “MAIN MENU” is [...]

188 English RECORD SET 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION If “OVERWRITE” is set to “OFF” f or recording cond itions, re cordi ng aut omat ical ly sto ps whe n the re cord ing ar eas become ful l. In this ca se, ARE A FULL RES ET can b e used to over wri te pr evio us rec ordi ngs . 4[...]

RECORD SET 3 English 189 Use the fo llow ing pr oced ures to set co ndit io ns for no rmal reco rding and timer reco rding. Use the fol lowi ng pr oced ure to s et t he pi ct ure qu al ity f or normal re cording. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “2 . RECORD SET”. The “ RECO RD SET” scre [...]

190 English RECORD SET 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Selecting setting valu es Image reso lution is det ermine d by the pro duct of pictur e quality an d recordin g rate. The higher th e picture q uality and the faster the recording rate, the bet ter the imag e resolution ; howev er, as[...]

RECORD SET 3 English 191 Use t he follow ing proc edure to s et timer op eration duration and timer recordi ng condi tions on a day-spe cific ba sis. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “2 . RECORD SET”. The “ RECO RD SET” scre en is di spl aye d. 3 Click “5 . TIMER SET”. The “TIMER S[...]

192 English RECORD SET 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the fo llowing proc edure to set the rec ording cond itions for alarm re cording. Set the ope ration pa tterns an d record ing cond itions to p erform alarm re cording. 1 Click the button on the operation pane l. The “MAIN MENU?[...]

RECORD SET 3 English 193 Audio can b e recorded t ogether with images du ring alar m recording . Note, how ever, tha t since this au dio data is a lso stored in the r ecordin g area, the rec ording time for this area decrease s. 6 Set “AUDIO RECORDING”. [Se ttin gs] (  indi cates de fault setting ) z The setti ngs for audi o record ing are r[...]

194 English RECORD SET 3 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the f ollowing proced ure to set the recor ding c ondition s to be used for pr e-alarm . ( J P.168) 10 Set “PRE-ALARM RECORDING” t o “ON” or “OFF”. [Se ttin gs] (  indi cates de fault setting ) z If “ALARM RECORDI[...]

English 195 4 GENERAL SET Set conditio ns for the di splay of dat a on the unit’s monitor by selecting “ON ” or “OFF ” for each item. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “3. GENERAL SET”. The “GENERAL SE T” screen is display ed. 3 Click “1 . DISPLAY SET” . The “DISPLAY SET?[...]

196 English GENERAL SET 4 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 5 Click [ SAVE]. The se tt ing is sa ved. z These set tings appl y to the buzz er on the dig ital video recorder . To sound a b uzzer on the PC, refer to NOTE . z Differe nt settings c annot be us ed for the re corder an d the PC. z [...]

GENERAL SET 4 English 197 Set a user ID and passwo rd to restric t operation of the digital video recor der direct ly or through the netwo rk.  User level s and privileges Sel ect from the f ol lowi ng f our user lev els. *1 Masked video cann ot be moni tored. *2 Howev er, the max imum number ma y not be possibl e dependi ng on the NET co nditio[...]

198 English GENERAL SET 4 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION This screen di splays settings r elevant to the unit’s interfa ces. Settings c annot be ch anged. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “3. GENERAL SET”. The “GENERAL SE T” s[...]

GENERAL SET 4 English 199 z “***” is d isplayed and “PLA YBACK DRIV E” cannot b e se t when only one har d disk is bei ng used or w hen “MIRRORING” is set to “OFF”. z When th is setting is m ade after ex panding the hard dis k, the har d disks are in itialized and all record ed video is lost . If any im portant reco rdings a re stor[...]

200 English GENERAL SET 4 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION z If s ett ings are chan ged duri ng n etwor k co ntro l, the connection is termi nated. z If a value o ther than “80” is set as the de fault value for the port, w hen s pecifying the U RL, e nter a colon (:) an d then the por t [...]

GENERAL SET 4 English 201 5 Specify a val ue for “PICTURE QUALITY” of live video which is received through net wor k. [Se ttin gs] (  indi cates de fault setting ) z If the recording rate for normal recording is set to “100 (FPS)”, vide o is transm itted in norm al quality wh ile record ing is in progr ess with the digital video recorder[...]

202 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 5 SCREEN SET Use the foll owing pro cedure to sc roll throug h video from all camera s at a specif ied interval. The i nte rval f or aut omat ic sel ect ion ca n only be set for full screen an d quad disp lay. 1 Click the button on the operation p[...]

SCREEN SET 5 English 203 Use the follow ing proce dure to mas k unnee ded video on the monitor screen with a gray pattern. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “4. SCREEN SET”. The “SCRE EN SET” scre en is displaye d. 3 Click “2. MASK SET”. The “MA SK SET“ sc reen is di spl ayed. On [...]

204 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 POWER LOSS/USED TIME Use the foll owing proce dure to ch eck date an d time of pow er losses, th e amount o f power-on t ime, and time of use for hard disk. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click ?[...]

English 205 7 INITIALIZA TION LOG Use the follo wing procedu re to check the records fo r hard-dis k initializati on and area resetting. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “6. INI TIALIZATION LOG”. The “INITIALIZATION LOG” screen is displayed. z The eigh t most recent records fo r initiali[...]

206 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 8 COPY MENU SETTINGS Use the fol lowi ng pr oced ure to s ave menu set tings to a PC. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “7. COPY MENU SETTINGS”. The “COPY MENU S ETTINGS” screen is displ[...]

English 207 9 ADVANCED MENU SET Use t he follow ing proc edure to rec eive noti fication by e-mai l when a n alarm ev ent or dev ice malf unction o ccurs whil e the digi ta l video recorder is connec ted to a network. To set this function, make the nece ssary e-m ail settings . 1 Click the button on the operation pane l. The “MAIN MENU” is d is[...]

208 English ADVANCED MENU S ET 9 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 6 Set up “SMTP SERVER ADDRESS” and “PO RT”. For “POR T”, specify a po rt number (0 to 65535 ) for use in SMTP (tran smission) . (Default sett ing: 25) 7 Set “USER MAIL ADDRESS” to the e- mail addre ss from whic[...]

ADVANCED MENU S ET 9 English 209 Set when cameras with remote operation capability are connect ed. Per for m the fol lowi ng co nne ction s a nd set cam era cont rol to use in full screen display. Connec tions neces sary for re mote oper ation: z Connect coaxial c ontrol camera s to the VIDEO te rminal. z Conne ct the Sanyo R S-485 co ntrol camer a[...]

210 English ADVANCED MENU S ET 9 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Use the f ollowing p rocedure t o synchr onize the time usin g the Internet or an NTP server on a LAN. 1 Click the button on the operation pane l. The “MAIN MENU” is d isplayed. 2 Click “8 . ADVANCED MENU SET”. The “[...]

English 211 1 DVR VIEWER2 “DVR V iewer2” is a p layback -only applicati on sof tware to sup port dig ital vide o reco rders. Use this se ction as you r guide to DV R Viewer2 instead of the instruct ion manual provided i n a separa te volume when you use D VR Viewer2 to pl ay back the vi deo and sou nd save d on an extern al medium such as a co [...]

DVR VIEWER2 1 212 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Running the Viewer sof tware will result in the initial screen of the Viewer being displayed. 1 Menu ba r This is the ba sic menu of the Viewer software. Click each men u to disp lay t he br eakdo wn of ea ch comm and. 1 File men u O[...]

DVR VIEWER2 1 English 213 The i mag e fil es ar e not d ispla yed when th e View er Sof twar e is run. Spe cify and op en the play back fil e through t he proce dure below. 1 Click in the tool bar. Or, click “O pen” in the f ile menu. The [Ope n] di alog is displaye d. 2 Click . The [Brows e for Folder] dialog is disp layed. 3 Specify the fol d[...]

214 English DVR VIEWER2 1 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION The i mag e dis pla y pat tern can be sele cted fr om 4 pat ter ns: f ull screen, quad scree n, 9 scree n, 16 screen using the toolbar button. z The disp lay pattern ca n also be se lected from the men u bar or from t he contex t men[...]

DVR VIEWER2 1 English 215 The audio and image fu nctions o f the Vi ewe r scree n can be operated . 1 Pl aybac k sli de bar The time st amp (rec ordi ng d ate and time ) of the st art a nd stop po int of th e playb ack fi le are d isplayed at bot h ends of the slide ba r . Sliding th e slide b ar knob allows you to move the playb ack point. z Click[...]

216 English DVR VIEWER2 1 INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION To save or print the image curr ently being dis played , switch to “ Full screen di splay ” and pe rform the fo llowing op erations . Clic k in the too lbar or “Sa ve” in the File men u. The save dial og appe ars. Specify the[...]

English 217 2 INTERFACE SPECIFICATIONS Data format Communication protocol A proprietar y Sanyo proto col (SSP: Securit y Serial Protoco l) is used. Us e of a special co ntrolle r for operati on is recomme nded. To ob tain this con troller, cont act a Sanyo ser vic e ce nter . RS-485 speci ficat ion s Mode Asynchronous Character length 8 bits Data t[...]

INTERFACE SPECIFICATIONS 2 218 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION The table bel ow show s the com mands su pported by the digital vi deo reco rder. DVR/VCR comman d table 0 1 2 3 4 5 6 7 00 TIMER ON/OF F 11 22 33 S H I F T I SHIFT J 44 S H I F T K SHIFT L MENU 55 SHIFT+ /RP U P 66 SHIF[...]

English 219 3 Specificat ions Note that pr oduct app earance and spec ifications ar e subjec t to change w ithout pri or notice. Specificat ions Product name Digital video recorder with multiplexer function Product number DSR-5716P (16 cha nnels), DSR-5709P (9 channels) Hard disk capacity Can be expanded using 80, 160, 250, 300 or 500 GB hard di sk[...]

Speci fications 3 220 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Units: mm Dimensions 420 86 364.5 10 DSR-571 6P 420 86 364.5 10 DSR-570 9P[...]

Speci fications 3 English 221 The reco rdin g ti me c an be cha nged by mo dif ying the rec ordi ng r ate and t he re cord ing pict ur e qual ity . The follo wing tab le provides refere nce valu es for pi cture qual ity and r ecording rate whe n video i s recorde d to the record ing ar ea of th e hard disk. z Recordi ng day s may chan ge for differ[...]

Speci fications 3 222 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION  Example: Recordi ng to 2600 GB hard di sks; int erna l HDD 300GB*2 + exter nal HDD 500GB* 2 (99%-usage ) (Unit: day)  Example: Recordi ng to 4000 GB hard di sks; int erna l HDD 500GB*2 + exter nal HDD 750GB* 4 (99%-usage )[...]

Speci fications 3 English 223 This table indicates rec ording tim es for pre- alarm recor ding, and it sh ould be use d when t his type of reco rding is be ing carrie d out . (Note 1) When mirroring or pre-alarm r ecordin g is set to “ON” , recording rates that can be set are l imited. (Note 2) When mirroring is set to “ON”, rec ording rat [...]

Speci fications 3 224 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION Default se tting, Recor ding rate: 12. 5 FPS, Reco rding time : 1 min. Whe n sett ing al arm du rati ons us ing a m enu, setti ngs ar e rest rict ed t o thos e avai labl e for the sele cte d reco rdi ng rat e. Similarly, when set[...]

Speci fications 3 English 225 Terminal board speci fications Input/output terminals Signal level Input/output circuit Alarm input [No-volt contacts] Sensor alarm output [Open collector/1k Ω , Low level active (max: 10mA 1/10W)] CTL4,5 Remote control input [Two-wire voltage control] ( J P.17) CTL6 Clock adjust input [No-volt contacts] CTL7 Clock a[...]

Speci fications 3 226 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION CTL9 Alarm reset input [No-volt contacts] CTL10 Warning output [DC5V/5.7k Ω , Active Lo w] CTL11 Normal recording area disk full warning outp ut [DC5V/5.7k Ω , Active Lo w] CTL12 Non rec output/ VIDEO LO SS [DC5V/5.7k Ω , A[...]

English 227 4 MENU SETTING SEQUENCE <INITIAL SET> 1.LANGUAGE/CLOCK SET -> 2.CAMERA DETECT -> 3.TITLE SET -> 4.HOLIDAY SET -> 5.TIME PERIOD SET -> MOVE:JOG SELECT:SHUTTLE <RECORD SET> 1.NORMAL REC EASY SET -> 2.RECORDING AREA SET -> 3.RECORDING CONDITIONS SET -> 4.NORMAL REC MODE SET -> 5.PROGRAM REC SET -> [...]

MENU SETTING SEQUENCE 4 228 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION 0 6 07 08 E N EN EN E N EN EN 4 15 16 E N EN EN E N EN EN MODE : A <GENERAL SET> 1.DISPLAY SET -> 2.BUZZER SET -> 3.SECURITY LOCK SET -> 4.RS-485 SET -> 5.HDD SET -> 6.NETWORK SET -> 7.NETWORK CONTRO[...]

MENU SETTING SEQUENCE 4 English 229 < INITIALIZATION LOG > DATE TIME AREA ACTION USER ----- --:-- ------- ( ------ ) -------- ----- --:-- ------- ( ------ ) -------- ----- --:-- ------- ( ------ ) -------- ----- --:-- ------- ( ------ ) -------- ----- --:-- ------- ( ------ ) -------- ----- --:-- ------- ( ------ ) -------- ----- --:-- ------[...]

230 English INTRODUCTION SETTINGS NE TWORK CONTROL NETWORK OPERATION NETWORK SETTINGS OTHE R OPERATION OpenSSL License The f ol low ing licen se is ap plied to O penSSL. LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. [...]

OpenSSL License English 231 * Copyright remains Eric Young’s, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentatio[...]

232 English INDEX A Alarm is cancel led .............. ........... ................. ........... ... 110 ALARM LOG SEARCH ...................... ................. ......... 176 Alarm log sea rch .......... ................. ........... ................. ..... 38 ALARM NOTICE SET ................... ........... ................. ... 207 ALARM REC MO[...]

INDEX English 233 Setti ng RS-485 . ................. ........... ................. ........... ... 120 Setti ng the buz zer ........ ................. ........... ................. ... 114 Setti ng the col or level ........ ........... ................. ........... ... 138 Setti ng the inte rval a nd monito rs for auto matic screen select ion ....[...]

[...]

Printed on recycled paper 1AC6P1P3155-- L8HBP/XE, L8HBQ/XE (0207TR-SY) SANYO Electric Co., Ltd. Printed in Japan[...]