Sanyo PLC-XF71 manuale d’uso

Multimedia Pr oject or MODEL PLC-XF71 Owner ’ s Manual ✽ Projection lens is optional.[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Simple Computer S ystem Set ting The projector has the Mul[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Contents Feat ur es and Design ................ 2 T able of Contents .................. 3 T o The Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Install[...]

4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLA CEMENT . REFER SERVICING TO QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L TAGE CO N S T I T UT I N G A R I S K O F EL E C T R I C SHOCK IS PRESENT WI THIN THIS UNIT . THIS SYMB[...]

5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollo w all warnings and instr uctions mark ed on the p[...]

6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken. – Do not put an y f[...]

7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down w ard, or inclined position in perpendicular direction to the horizontal plane. Installing the Pr oject or in Pr oper Directi[...]

8 Mo ving the Pr oject or CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suitable carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuitable transport case. This m[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an A S T A approv ed BS 1 362 fuse must be used of the same rating , marked thus A S A . If the fuse cover is det ac hable, never use th[...]

10 u e r t F r ont o q w y i Bac k q Lens Mount Co ver w Pr ojection Lens (Option) e Indicators r Infr ar ed Remote Receiv er (F r ont) !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !0 Infrar ed Remote Receiv er (Rear) !1 Exhaust V ent t Adjustable Feet y T er minals and C[...]

11 T er minals and Connectors r  R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). e USB CONNECT OR (Series B) USB connector is to used to service the projector . i S-VIDEO INPUT J ACK Connect the S-VIDEO output signal from video equipment to this jac k[...]

12 i FOCUS but ton A djust the f ocus. (p.27) w ZOOM but ton Zoom in and out the images. (p.27) q ON/ST AND-B Y butt on T urn the projector on or of f . (pp.23,24) o INPUT but ton Select an input source INPU T 1, INPUT 2, Input 3 or Input 4. (pp.31 -33) y A UT O PC ADJ . butt on A utomatically adjust the computer image to its optimum se[...]

13 Indicat ors q w e r t y u e W ARNING TEMP . indicat or T his indicator flashes red when internal projector temperature is too high. (pp.65, 72-7 4) u LAMP 1 REPLACE indicat or T urn orange when the life of the projection lamp1 draws to an end. (p.61, 73) q LAMP Indicat or T his indicator is dim when the projector is t urned on. And bright [...]

Remot e Contr ol P art Names and F unctions q t e !0 i !4 r !3 !1 w y u o !7 !2 !8 !9 @0 e LIGHT but t on Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU . (pp.25-26) t POINT ed 7 8 but tons – Select an item or adjust the value in The ON-SCREEN MENU . (p.25) –P an the image in D[...]

Remot e Contr ol Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size bat ter ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment. T o ensure saf e operation, please obser ve the f ollo wing pre[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . S witc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first bef ore c hangi[...]

17 Installation Lens Installation Bef ore set ting up the projector , install Projection Lens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, contact sales dealer where you purc hased the projector . - Do not use the optional lens below f or this[...]

18 Pictur e Level and Pitc h Adjustment Installation AD JUST ABLE FEET REAR AD JUST ABLE FEET (R ef er to p.1 0) Projection lens can be mo v ed from side to side and up and do wn with the motor -driven lens shif t function. This function makes the positioning of images easy on the screen.(See page 27) Lens Shif t Adjustment When the lens is shif te[...]

19 T er minals of Pr ojector The projector has two replaceable Interf ace board slots. The projector's functions can be e xtended by installing the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are pro vided in y our purc hasing the projector . F or the Optional Interface B oards, cont act sales dealer wher[...]

20 Installation Connecting t o Comput er V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p lu g t h e po we r co r d s o f b o t h t h e projector and e xternal equipment from the A C outlet before connecting cables. Cables used for connection • V GA Cable[...]

21 Installation Connecting t o V ideo Equipment Video Source (e xample) Video Casset te Recorder Video Disc Pla y er RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as D VD player or high-definition TV source.) Co mpo nent V ideo O utp ut BNC Cable Dig ital O utpu t ( H DC P com patib le ) D VI Cable [...]

22 NOTE ON THE PO WER CO RD A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug type with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, cont act your sales dealer . Pr oject or side A C Outlet side T o POWER CORD CONN[...]

23 T ur ning On the Pr ojector Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. The [...]

24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P o wer of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f . Af ter the projector is turned of f [...]

25 Side Contr ol SELECT butt on Ho w t o Oper at e the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oin[...]

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image lev el among Standard, Real, and Image 1–1 0(p. 38). Used to adjust the size of the image. [Normal/T rue/Wide/ F ull screen/Custom/Key stone/Ceiling/R ear/Reset/Digital zoom +/–] (pp.39-4[...]

27 Oper ating with Pr oject or Contr ol Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo v ed up or do wn to 50 percent, or sidew a y s up to 1 0 percent from the central axis of the lens shif t. Lens Shif t Adjustment ✔ Note[...]

28 Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to displa y the information windo w on the screen. T o hide the information windo w , press the INFORMA TION but ton again or P oint 7 8 b[...]

29 Oper ating with Remot e Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE functi[...]

30 KEY ST ONE but t on Reduce the upper width with P oint e button. Reduce the lo wer width with P oint d button. Reduce the lef t part with P oint 7 button. Reduce the right part with P oint 8 button. • The white arro ws indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the ma[...]

31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but ton on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPUT 4 as y ou press the INPUT but ton. Bef ore using the INPU T but ton on the remote control, y ou must select a correct input source b y On-Screen Menu and the latest input sour[...]

32 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. Then y ou can switc h to the desired input. 1 2 Use the P oint ed but tons to select the desir[...]

33 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. [...]

34 Comput er S yst em Selection This projector automatically t unes to various types of computers based on V G A, S V GA, XG A, SXGA, SXG A+, WXGA, UXG A, or WUXGA (ref er to “Compatible Computer Specifications” on pages 75-7 6). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to p[...]

35 A ut o PC A djustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed but t[...]

36 Manual PC A djustment Some computers employ special signal f ormats whic h may not be t uned b y Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It a[...]

37 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select R eset and press the SELECT but ton. A confirmation box appears and then select [Y es][...]

38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le v el preset on the projector . Standard Pi[...]

39 ✔ Note: • T rue, F ull screen, and Digit al zoom +/– cannot be selected when no signal is detected in the PC Sy stem Menu. (p.34) • The projector cannot display and resolution higher than 1 60 0 x 1 200. If your computer ’ s screen resolution is higher than 1 60 0 x 1 200, low er the resolution before connecting the projector . • The[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode b y pressing the D .ZOOM but ton on t[...]

41 Comput er Input A V SY STEM MENU (VIDEO OR S-VIDEO) A V SY STEM MENU (COMPONENT VIDEO) V ideo S yst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V S ystem Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then p[...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Imag e Lev el Selection Mov e the red frame pointer to the d[...]

43 Scr een Siz e Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note: • W ide cannot be operated when “720p, ” “1 0[...]

44 Ke ystone This function is used to store or reset the k e ystone cor rection when the Main On/Of f S witc h is pressed to Of f or the A C pow er cord is unplugged. Use the P oint 7 8 but tons to switc h between eac h option. Store . . . Keep the ke y stone correction e ven when the Main On/Of f S witc h is pressed to Of f or the A C pow er cord [...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the setti[...]

46 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Off . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c heck mark if y ou do not w ant to apply the adjusted colo[...]

47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressiv e mode. Pres[...]

48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Sw edish, R ussian, Chinese, Korean, or J apanese. Use the P oint ed [...]

49 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Bef ore capturing an image, select “Standard” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to XG A (1 024 x 7 68). •Certain signals ma[...]

50 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Off . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo can[...]

51 Lamp control Choose the running speed of cooling f ans from the f ollowing options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an contr ol This function allo ws y ou to c hange the brightness of the screen. Auto . . . . . Brightness according to the input signal. Normal . . . Normal brightness. Eco . . . . . . L[...]

52 P o wer manag ement Time lef t bef ore the lamp is of f Press the SELECT but ton at Po wer management and the dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options. Press the P oint d button to select the timer , and then use the Point 7 8 but tons to set the timer F or reducing po wer consumption as w ell as mainta[...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons. . . . . . Unlock ed. . . . . . Loc k the side control but to[...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 80, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST AR TED . The PIN code can be c hanged to your desired f our -digit number . Press the P oint d[...]

55 Set ting Shutt er Shut ter function is available to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shut ter operation from the remote control. Projector . [...]

56 F act ory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est[...]

57 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and may result in internal heat buildup and adversely af f ect the lif e of the projector . This projector has a[...]

58 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filte[...]

59 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears [...]

60 Lamp Manag ement This P rojector is equipped with 2 P rojection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators. This function also automatically controls the Lamp Mode [...]

61 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Co v er . Slide and open the Lamp Cov er until it mak es a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector , press the Main On[...]

62 Maint enance and Car e ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing inf ormation to the dealer . l Model No. of y our pr oject or : PLC-XF71 l Replacement Lamp T ype No. : PO A -LMP128 (Ser vice P arts No. 61 0 341 9497) Reset ting the Lamp Count er Be sure to [...]

63 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. T here is no guarantee of the same lifetime for eac h lamp. Some lamps may fail or terminate[...]

64 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet bef ore cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blo w er to clean the lens. A [...]

65 The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the state of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certa[...]

66 T roubleshooting Bef ore calling y our dealer or ser vice center for assistance, c hec k the items belo w once again. 1 . Make sure you ha v e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po w er cords are properly conne[...]

67  appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 55) appears on the scr een – The filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 57 -58) The image is out of f ocus. – A djust the f ocus of the projector . – Chec k Projectio[...]

68 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you ho w to obtain se[...]

69 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. Projector Infor mation Ke y loc k Screen Language Lamp mode [...]

70 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ Sy stem display[...]

71 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu/Quit Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided. Menu Logo Lamp control Both/F ront/Bac k Normal/Max P ow er management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Of f/Ready/Shut do wn 1–30[...]

72 Indicat ors and Pr oject or Condition Chec k the indicators for the projector condition. The pr ojector is oper ating normally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fast (app[...]

73 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The pr[...]

74 Appendix The pr ojector is det ecting abnormal condition. Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig.2) appears on the screen and the W ARNING FIL TER indi[...]

75 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment can be limited when these modes are selected. Appendix ✽ “T r ue ” cannot be selected when WUXG A1, UXG A2, UXGA3, UXG A4 and UXG A5 are sele[...]

76 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly view ed. • Specifications are subject to c hange without notice. ON-SCREEN DISPLA Y RESOLUTION H-Fr eq.(kHz) V -Fr eq.(Hz) D-V GA 6[...]

77 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 20.87” x 1 0.53” x 29.8” (530 mm x 267 .5 mm x 757 mm) (Not including projections) Net Weight 60.85lbs (27 .6 kg) F eet Adjustment 0˚ to 2.8˚ P anel Resolution LCD Panel S ystem 1 .8” TFT A ctive Matrix type, 3 panels Panel R[...]

78 Optional P arts Model No. Wired Remote Cable(30m) : PO A-CA-RC30 Optional Interface Board (DVI) : PO A-MD1 8DVI Optional Interface Board (5-BNC) : PO A-MD1 6VD1 Optional Interface Board (D-sub 15) : PO A-MD04V G A Optional Interface Board (Dual-SDI) : PO A-MD1 7SDID Optional Interface Board (Network board) : PO A-MD1 3NE T2 Optional Interface Bo[...]

79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Ground V ert. sync. DDC Cloc k 9 13 10 12 11 14 15 CONTROL POR T CONNECT [...]

80 W rite do wn the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the ser vice st ation. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the f our -digit number be c hanged, the factor y set number will be inv ali[...]

81 Dimensions Unit: inc h (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 ° 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.72(120) 8.27(210) 6.89(175) Screw Holes for Ceiling Mount Screw: M8 De[...]

82 Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.1 1) Launc h a communication sof tware pro vided with PC and set up the communication [...]

83 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below . The projector decodes the command and ret urns the 'Character string' with the format belo w; For mat Command F unction Projector Ret urn P[...]

KW7A SANY O Electr ic Co., Ltd.[...]