Sanyo POA-MD13NET2 manuale d’uso

Network Boar d POA-MD13NET2 OWNER’S MANUAL INSTALLATION and OPERATION of the Network Board This board is the Network Board to control and set up a projector via a network. Connect a network cable to this board, and by accessing the connected projector using the web browser on your computer, the projector can be controlled and set up remotely. Thi[...]

2 Compliance Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gen[...]

3 Network Board OWNER’S MANUAL ENGLISH Contents Chapter 1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Noti[...]

4 Contents Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Save a image adjustment value . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Load a image mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Screen Adjustment . . . . . . . . . . . . . . . . . [...]

5 Network Board OWNER’S MANUAL ENGLISH Chapter 1 Pr eparation 1[...]

6 Chapter 1 Preparation Featur es W eb Management function ( ☞ p.36) With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer. E-Mail Alert function ( ☞ p.32) Projector (Network Board) sends[...]

7 Network Board OWNER’S MANUAL ENGLISH Features Multi-control function ( ☞ p.56) A single computer can control and set up the multiple computers at the same time. Automatic On/Off using T imer function ( ☞ p.47) Automatically turn on or off the projectors at specified date/day and time by using the clock function. Control port r eady for exte[...]

8 Chapter 1 Preparation Operating Envir onment To perform the management and setting up the projector using this product, the envi- ronment described below is required. Operating System Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT / Windows XP / Windows Vista (32bit version) Mac OS 8.0 or later Network Network must handle Ethern[...]

9 Network Board OWNER’S MANUAL ENGLISH The limitation* 1 of connection between this product and Hub or Computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Maximum length Network Board - Hub UTP Straight Cable with category 3 or 5 * 2 100m Network Board - Computer UTP Cross Cable with categor[...]

10 Chapter 1 Preparation Notices Expression/Abbr eviation The following abbreviations may appear in this manual: ● Windows 95, Windows 98, Windows 2000, Windows Me, Windows XP, Windows NT4.0, Windows Vista ➜ Windows ● Macintosh, Power Macintosh ➜ Macintosh ● Mac OS 8 or later ➜ Mac OS The word "projector" found in this manual [...]

11 Network Board OWNER’S MANUAL ENGLISH Chapter 2 Installation 2[...]

12 Chapter 2 Installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. Function of the Network Boar d ( ☞ p.13) 1 Installation and network configuration ( ☞ p.14-23) 2 Set up is completed. Check the contents of a pack[...]

13 Network Board OWNER’S MANUAL ENGLISH Name and function of each part ✐ Do not touch the connector. It may damage the product. Caution ! z Name and function of each part Serial port This is used when controlling the external equipment via the net- work. ( ☞ p.61) LAN port Connecting the LAN cable. ( ☞ p.15) LINK indicator (Orange) This lig[...]

14 Chapter 2 Installation 1 Turn the Mains switch off. NOTE; When replacement of terminal board, MAIN ON/OFF switch should be OFF position. 2 Remove 2 screws on a board from any of the slots 1 to 4*, and then pull the board out from the projector. * The number of the slots may differ from the actual depend- ing on type of the projector. 3 Put the B[...]

15 Network Board OWNER’S MANUAL ENGLISH Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distribute[...]

1 Selection of network menu Turn on the projector and display the menu on the screen. Select network icon from the main menu and then press SELECT button once. Check that the mode is "On". If not, change mode to "On" using the point buttons ( 7 8 ). 16 Chapter 2 Installation Network configuration (T ype1) Confirmation of the net[...]

17 Network Board OWNER’S MANUAL ENGLISH 2 Configuration for IP Address/ Subnet mask/Default Gateway*/DNS* Press SELECT button again. The following network setting pallet appears on the screen. Enter the specified network addresses. How to enter the numbers There are 2 ways to enter the numbers, one is by using the point buttons ( d e ) on the rem[...]

Network PIN code setting The Network PIN code can be set to restrict access to the setting page of the projec- tor using the web browser. ✐ Default Network PIN code [0000] means no Network PIN code is set. 1 Displaying Network PIN code menu Select network menu and then select "Network PIN code" sub menu. Press SELECT button twice to dis[...]

How to enter the numbers with the screen 10-key pallet 1. Select a column with a red frame by using the point buttons 7 8 . 2. Press SELECT button. The screen 10-key pallet appears on the screen. 3. By using the point buttons( d e 7 8 ), select numbers 0 to 9 and press SELECT button. By repeating the above to enter the complete number on the column[...]

20 Chapter 2 Installation Network configuration (T ype2) Confirmation of the network menu When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item “Mounting” ( ☞ p.14). Configure the netwo[...]

21 Network Board OWNER’S MANUAL ENGLISH Network configuration 2 Configuration for IP Address/ Subnet mask/Default Gateway*/DNS* Press the SELECT button again, the following network setting menu appears on the screen. Enter the specified network address with the point buttons ( d e 7 8 ). The following is an example of a network configuration. NET[...]

22 Chapter 2 Installation ✐ Password setting must be done when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information please refer to item “Initial Setting/Password set- ting” ( ☞ p.30). ✐ Valid character[...]

23 Network Board OWNER’S MANUAL ENGLISH Network configuration Notice about system construction For installation of multiple projectors into the same network with Network Board. Do not install multiple projectors with Network Boards that have their default net- work settings to the same network. The use of the Network Boards which have the default[...]

24 Chapter 2 Installation[...]

25 Network Board OWNER’S MANUAL ENGLISH Chapter 3 Basic Setting and Operation 3[...]

26 Chapter 3 Basic Setting and Operation 2 Select a display mode and login This product provides 2 types of control mode, Graphic Mode and Text Mode as the below. Select a proper mode to match your computer and network environ- ment by clicking on the text link. Once you select your desired display mode, the setting page you selected display mode w[...]

27 Network Board OWNER’S MANUAL ENGLISH Login the setting page of the projector 3 Display of main setting page The following main setting page will be displayed according to your display mode selection. Perform the various kinds of setting through this page. Click on the linked text to display the control and setting pages. Setting page Displays [...]

28 Chapter 3 Basic Setting and Operation Returns to the display mode selection page. x Main setting page in the Text Mode display Main menu For selection of control and setting items of the projector. Displays sub menu and status of selected items when clicking the linked text. Setting page number Browses pages by click- ing the linked number. Sett[...]

29 Network Board OWNER’S MANUAL ENGLISH Initial Settings After installing this product to the projector, perform the following basic ini- tial setting. Click on the Initial linked text on the main menu to display the initial setting page. The Languages, Date/Time and Password can be set in this page. The model name of the projector on which this [...]

30 Chapter 3 Basic Setting and Operation 2 Password Setting This page is to set the password to restrict the access from an unauthorized per- son through the network. Enter the password onto the text box and press the Set button. The Network Board begins restarting and it takes about 40 seconds. Close (Quit) the web browser and access to the login [...]

31 Network Board OWNER’S MANUAL ENGLISH Network Configuration Network Configuration Click on the Network Setting linked text on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask, Default gateway, DNS (Domain Name Server) and projector name. 1 Configure the network The IP address and Subnet Mas[...]

32 Chapter 3 Basic Setting and Operation ✐ To use the E-mail function, it must be set the DNS address on the Network Setting page correctly. ✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your network environment. If the SMTP server is located in your LAN (Local Area network), the address set to SMTP s[...]

33 Network Board OWNER’S MANUAL ENGLISH E-Mail Setting 3 Condition selection for sending alert message Click on the Option linked text. Check the condition items under which alert mes- sages will be sent and press the Set button. Please refer to chapter “Examples :Type and con- tents of alert messages” described on the next page. * The mail o[...]

34 Chapter 3 Basic Setting and Operation Examples: T ype and contents of alert mail When the projector has an abnormality, the following alert messages are sent to the registered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this massage. This is very useful to maintain [...]

4 35 Network Board OWNER’S MANUAL ENGLISH Chapter 4 Contr olling the Pr ojector[...]

36 Chapter 4 Controlling the Projector ✐ The projector is not turned on for about 90 seconds after switching into the standby mode. After the power status indicator on the control page changes from “On Cooling down” to “OFF”, then try to turn on the projector with On button. ✐ The web browser checks and updates projector's conditio[...]

37 Network Board OWNER’S MANUAL ENGLISH The icons [A] , [B] and [C] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector* 1 [B]: Internal temperature of the projector [C]: Internal temperature of the projector* 2 * 1 The indicated peripheral temperature of the projector is a little higher than a[...]

Input This function is to select the input mode and slot to the projector. Select the input slot with the radio button, and input source mode with the pull- down menu button. Then set the selected input source and source mode by pressing the Set button. 38 Chapter 4 Controlling the Projector Select a source mode with pull-down menu. Select a slot w[...]

39 Network Board OWNER’S MANUAL ENGLISH PC Adjustment This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Click on the page number linked texts to change the setting pages. ✐ These parameters will appear only when the analog computer input mode is selected. Item De[...]

Load a Set Select a set to load with the pull-down menu button of the Load Setting No. and press the Set button. The stored setting values will be applied to the each PC adjustment item. 40 Chapter 4 Controlling the Projector Save a Set 1 Decide your desired PC adjustment val- ues through the PC Adjustment pages “1”to “2”. 2 Display the pag[...]

41 Network Board OWNER’S MANUAL ENGLISH System Adjustment This function is to select the color system of video signal or scanning sys- tem of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, and then press the Set button. The displayed systems are switche[...]

42 Chapter 4 Controlling the Projector Image Adjustment This function is to adjust the projected picture image and set the image mode. For selection of image mode, select a desired image mode with the Image Adjustment Mode pull-down menu button and then press the Set button. The setting items are switched automatically according to selected input m[...]

43 Network Board OWNER’S MANUAL ENGLISH Save a image adjustment value 1 Decide your desired image adjustment value through the image adjustment pages “1” to “3”. 2 Display the page “3” and select the desired image number* 1 with the pull- down menu of the Save Adjustment . 3 Register by pressing the Set button. To restore the adjustme[...]

Sound Adjustment This function is to adjust the sound of the projector. The values in each text box represent the current control value or status. 44 Chapter 4 Controlling the Projector Screen Adjustment This function is to adjust the screen mode of the projector. The setting items are switched automatically according to selected input mode, com- p[...]

45 Network Board OWNER’S MANUAL ENGLISH Setting This function is to set up the projector. Click on the page number “1” to “5” linked texts to change the setting pages. Item Description Language ..........Changes the on-screen menu language of the projector. Keystone* ..........Corrects the keystone distor- tion of the projected image on t[...]

46 Chapter 4 Controlling the Projector Item Description Lamp Interval ....Sets the interval period of switching two lamps. Remote Control ......Sets the remote control codes. Lamp Counter Reset ................Resets the lamp use-time. Reset when replaced lamp. P-TIMER ............Used to display the timer on the screen. The status is changed as ON[...]

47 Network Board OWNER’S MANUAL ENGLISH Control the Projector Item Description HD data wireless ......Sets the HD data wireless board. Mode select ......Switches the communication mode (Single mode or Broadcast mode). Authentication ....Executes or resets the authen- tication at the Single mode. ID input ..............Inputs ID number at the broa[...]

48 Chapter 4 Controlling the Projector How to set the T imer This function is used to turn the projector off or on at a pro- grammed day/date and time. Follow the below steps for set- ting. 1 Set a day or date To set the timer event at same time everyday, select “day” entry with radio button and then select desired day with the pull- down menu [...]

49 Network Board OWNER’S MANUAL ENGLISH Control the Projector ✐ The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product. When the battery runs do[...]

50 Chapter 4 Controlling the Projector Service This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed. There may be not available items depend- ing on the projector's function. ✐ The adjustments of H/V Area and Positi[...]

51 Network Board OWNER’S MANUAL ENGLISH Check the Save items Browse pages by clicking on the page numbers and check each setting status. The pages for the save items are constructed by 7 pages. The contents of the pages may differ from the actual depending on the selected input mode and the function of the projector. Control the Projector Save Ac[...]

52 Chapter 4 Controlling the Projector Load a control set Select your desired set number with the pull-down menu button of the Load Setting No. and then press the Set button. The setting values of the selected set number are applied to the current settings. Example of setting ✐ If the contents of the saved set are not match for the slot equipped [...]

53 Network Board OWNER’S MANUAL ENGLISH Control the projector’s menu Contr ol the projector's menu Click on the Menu linked text on the main menu. The following menu con- trol page is displayed. This page is to control the on-screen display menu of the projector. Item Description Display Menu ....To switch the on-screen display menu on or [...]

54 Chapter 4 Controlling the Projector Make a memo Select the Memo setting page by clicking on the Memo linked text on the main menu. The following setting page is displayed. It is convenient to use as a memo for the simple description where the projector is placed in. This note will be displayed on the login page. Input a memo and then press the S[...]

55 Network Board OWNER’S MANUAL ENGLISH Chapter 5 Contr olling the Multi-Pr ojectors 5[...]

56 Chapter 5 Controlling the Multi-Projectors Multi-Contr ol This function enables you to control (Power, Image, Date/Time, Timer, Screen, etc.) the multiple projectors equipped with the Network Board con- nected to the network. Click on the Multi Control linked text on the main menu to dis- play the control page. Note: To control the multiple proj[...]

57 Network Board OWNER’S MANUAL ENGLISH *1 Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nickname like “MeetingRoom101”, it can be managed and recognized easily. If you use the DNS serv- er, register the host n[...]

58 Chapter 5 Controlling the Multi-Projectors Exclude/Add/Delete a projector To change the mode of the registered pro- jectors, Select a mode with the pull-down menu button under the IP address of the target projector and then press the Set button. Status If some of the registered projectors are deactivated by some reasons (such as dis- connecting [...]

59 Network Board OWNER’S MANUAL ENGLISH Load and apply the setting value The control sets saved for each projector ( ☞ p.50) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull-down menu button and then press the Set button. The con- trol values stored [...]

60 Chapter 5 Controlling the Multi-Projectors Contr ol multi-projectors at the same time The valid controls are shown below. Please refer to chapter 4 “Controlling the Projector” ( ☞ p.35) for further control and description. When the control button or setting button is pressed, the registered projectors for the multi-control are controlled a[...]

61 Network Board OWNER’S MANUAL ENGLISH Chapter 6 Use of Serial Port 6[...]

62 Chapter 6 Use of Serial Port This product provides a serial control port (RS-232C) to control the external equipment which has an RC-232C port. This function allows external equip- ment to be controlled by the computer through the network and the projec- tor can be controlled by the external serial controller. Before connecting the external equi[...]

63 Network Board OWNER’S MANUAL ENGLISH *1 This product will restart automatically when “Port” or “Serial Control” is changed and it takes about 40 seconds. *2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port. ✐ There are 2 types of RS-232C [...]

64 Chapter 6 Use of Serial Port Internet Intranet PC2 PC4 PC5 PJ2 Tu rn on the projector PJ1 PJ1 RS-232C serial cable Internet Intranet PC2 PC4 PC3 PC5 PJ2 PJ1 PC1 Tu rn on the D VD player and start playing. D VD Player RS-232C serial cable Example 2 Controlling a projector which is not on the network function through network. Contr ol Examples Exa[...]

65 Network Board OWNER’S MANUAL ENGLISH Control Examples Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). Internet Intranet PC2 PC4 PC3 PC5 PJ2 PJ1 Serial Controller RS-232C serial cable Serial Port Switching When connecting the peripheral equipment to this network board, you should notice the type[...]

66 Chapter 6 Use of Serial Port Use of T elnet You can control the equipment connected to the serial port on the Network Board and the projector itself by using the telnet application* 1 installed on your computer. The following is a control example of external equipment. The telnet application is needed to use commands* 2 which controls the extern[...]

67 Network Board OWNER’S MANUAL ENGLISH Use of telnet 3 When communication is established, the word “PASSWORD:” appears on the window. Type the login password* for the projector and then press “Enter” key on the keyboard. If you do not register the login password, just press “Enter” key. When the word “Hello” is replied, login has[...]

68 Chapter 6 Use of Serial Port Control the pr ojector with T elnet This product allows you to control the projector by using the Telnet application. Normally, it is used for controlling the external equipment connected to the serial port and also control the projector itself by specifying the telnet port no.10000. * It is not affected by the seria[...]

69 Network Board OWNER’S MANUAL ENGLISH Chapter 7 Appendix:A 7 Connection examples Web browser setting Technical data[...]

70 Chapter 7 Appendix Examples of Connection Peer-T o-Peer connection Connect the projector (PJ01) to the control computer (PC05) directly Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gate way : 0.0.0.0 DNS : 0.0.0.0 Computer Name: PC10 IP Address : 192.168.0.10 Subnet Mask : 255.255.255.0 Default Gate way : DNS[...]

71 Network Board OWNER’S MANUAL ENGLISH Examples of connection The gateway (Router) installed in the network Connect the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.0 Network Group: 192.168.10.0 Projector Name: PJ01 IP Address : 192.168.200.15 Subnet Mask : 255.255.255.0 Default G[...]

72 Chapter 7 Appendix W eb browser setting This product is designed enable the projector to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser. Active Script/J[...]

73 Network Board OWNER’S MANUAL ENGLISH Web Browser Setting Examples: OS/Br owsers W indows XP Professional Internet Explorer v.6.0 ActiveScript setting Select the I nternet Options menu from the Tool menu on the web browser and then select Security tab and click Customize Level… button. On the security setting win- dow, scroll down and find th[...]

74 Chapter 7 Appendix Proxy setting Select the Internet Options menu from the Tool menu on the web browser and then select Connection tab and click LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected. - Using proxy server To use an[...]

75 Network Board OWNER’S MANUAL ENGLISH Web Browser Setting Netscape Navigator v.7.0 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked.[...]

76 Chapter 7 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Proxies in the Category column. Properly set up your web brows- er's the proxy server settings according to the local area network environment to which the projector is connected. - Using proxy server When you [...]

77 Network Board OWNER’S MANUAL ENGLISH Mac OS 8.6 Internet Explorer v.5.0 ActiveScript setting Select the Preference menu from the Edit menu on the web browser and then select Web Content under the Web Browser heading the preference settings window. Make sure that the Enable scripting is checked in the Active Content column. Web Browser Setting[...]

78 Chapter 7 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Network heading the preference settings window. Properly set up your web browser's the proxy server settings according to the local area network envi- ronment to which the projector is connected. - Using proxy [...]

79 Network Board OWNER’S MANUAL ENGLISH Netscape Navigator v.4.7 JavaScript Setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that Enable JavaScript is checked. Web Browser Setting[...]

80 Chapter 7 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Advanced heading in the Category column. Properly set up your web browser's the proxy server settings according to the local area network environ- ment to which the projector is connected. - Using proxy server [...]

81 Network Board OWNER’S MANUAL ENGLISH Specifications Pr oduct specification Type ......................................Network Board LAN interface ........................Applicant regulation IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) Data transfer speed 10Mbps/100Mbps Data transfer mode Half duplex/Full duplex Terminal 8-pin modular (RJ-45) [...]

82 Chapter 7 Appendix LAN port specification Port Specification Serial port specification pin No. Signal Function 1 TX+ Transfer data (+) 2 TX- Transfer data (-) 3 RD+ Receive data (+) 4 (not used) 5 (not used) 6 RD- Receive data (-) 7 (not used) 8 (not used) 12 3 4 5678 8-pin modular connector (RJ-45) Pin No. Signal Name Socket Side A Side B 1C D [...]

83 Network Board OWNER’S MANUAL ENGLISH Appendix:B Q&A[...]

84 Chapter 7 Appendix Q&A Why doesn’t the setting page appear in my web browser? F ollowing causes are possible. Please check them. 1. The projector is not connected to the network. Check LED indicators status ( ☞ p.13). - Check the connection of LAN cable if the LINK indicator does not illuminate orange. - Check the network configuration o[...]

85 Network Board OWNER’S MANUAL ENGLISH 3. Enter the projector’s IP address [192.168.0.2] at the “Address” column on the Web browser. [Note] Make sure that the proxy setting of your web browser is set to “Not use a proxy server” ( ☞ p.72). 4. If the login page appears, this product is operating properly. The problems may be in the net[...]

86 Chapter 7 Appendix How can I install several projectors equipped with the Network Board? Install and configure network one by one to avoid the IP address collision each other ( ☞ p.23). To configure the IP address please see chapter “Network configuration” ( ☞ p.16. p.20) How many projectors can I control with multi-control function? It [...]

87 Network Board OWNER’S MANUAL ENGLISH Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition. Also, projector[...]

88 Chapter 7 Appendix Why am I not receiving E-mail alert messages? Make sure that the registered E-mail address and SMTP server address are cor- rect. If the SMTP server is located in your LAN (Local Area network), the address should be set to the SMTP server in your LAN. The SMTP server locat- ed outside of your LAN may not be available for secur[...]

89 Network Board OWNER’S MANUAL ENGLISH Can I update the firmware of the Network Board. It is possible to update the firmware through the network. It is required to have a special tool for the updat- ing. For further information please consult your local dealer. The ver- sion number of the firmware is indi- cated on the lower part of the“Initia[...]

90 Chapter 7 Appendix What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assignment. Rule1 Do not configure the same IP address to the network equipment in the same network group. Each piece of equ[...]

91 Network Board OWNER’S MANUAL ENGLISH Q&A[...]

Network Board Owner’s Manual IDRMD (built in KJ5AL) (b) SANYO Electric Co., Ltd.[...]