Sharp LC-32LE240E manuale d’uso

5 0 2 0 1 4 9 3 SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORA TION http://www .sharp.eu LCD COLOUR TELEVISION OPERA TION MANUAL LCD TELEVIZOR U BOJI KORISNIČKI PRIRUČNIK BAREVNÝ LCD TELEVIZOR NÁVOD K POUŽITÍ ENGLISH HRV A TSKI CZECH LC-32LE240E[...]

English - 1 - Contents Features ................................................................. 3 Dear SHARP customer ........................................... 3 Introduction ............................................................. 3 Preparation ............................................................. 3 Important safety precautions ..[...]

English - 2 - SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked ASA or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always r[...]

English - 3 - Features Remote controlled colour LCD TV . • Fully integrated T errestrial digital-cable TV (DVB- • T -C- MPEG2) (DVB-T-C MPEG4). HDMI connectors for digital video and audio. This • connection is also designed to accept high de fi nition signals. USB input. • Programme recording • Programme timeshifting • 1000 programmes [...]

English - 4 - Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean • the product. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth to gently wipe the panel when it is dirty . T o protect the panel, do not use a chemical • cloth to clean it. Chem[...]

English - 5 - Safety Precautions Read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains [...]

English - 6 - LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally , a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product. W arning! Do not leave[...]

English - 7 - Package Contents SLEEP SCREEN PRESETS LANG. FAV EPG SWAP SOURCE C DISP . SEARCH MODE INFO CH V Remote Control LCD TV Batteries: 2 X AAA Instruction Book Quick Guide 1 X Video & Audio Connection Cable 1 X Component Video Connection Cable Note: Y ou should check the accessories after purchasing. Make sure that each accessory is incl[...]

English - 8 - Remote Control Buttons Standby 1. Image size / Zooms videos (in Media Browser 2. video mode) Sleep T imer 3. Mono / Stereo - Dual I-II / Currrent Language (*) 4. (in DVB channels) Favourite Mode Selection (in DVB channels) 5. Numeric buttons 6. Electronic programme guide (in DVB channels) 7. No function 8. Media Browser 9. Navigation [...]

English - 9 - LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/A V button 3. Programme Up/Down buttons 4. V olume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections - Back Connectors SPDIF SCART VGA Coax.OUT 1 2 HDMI 2: HDMI Inpu[...]

English - 10 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you 1. subscribe to. For more information, see “Conditional Access” section. USB Inputs. 2. Note that programme recording feature is available via these USB inputs. Y ou can connect external hard d[...]

English - 1 1 - Using USB Inputs USB Connection Y ou can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV . This feature allows you to play fi les stored in a USB drive or record programmes. 2.5” and 3.5” inch (hdd with external power supply) • external hard disk drives are supported. T o rec[...]

English - 12 - Connecting to a DVD Player via Component Sockets (YPbPr) or Scart Cable Some DVD players are connected through • COMPONENT SOCKETS (YPbPr) . In this case, you must use the supplied Component video connection cable for enabling connection. First, plug single jack of the cable to the TV’ s YPbPr socket (side). Afterwards, insert yo[...]

English - 13 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV . When the connection is made, switch to PC source. See “Input sel[...]

English - 14 - If the TV will not be used for a long period i.e. • holidays, then unplug the power cord from the mains socket. Standby Noti fi cations If the TV switches of f while in No Signal mode, the following on-screen message will be displayed on the next switch-on: When the Auto Tv Off timeout is reached, the following message will be dis[...]

English - 15 - Viewing Electronic Programme Guide (EPG) Y ou can view the electronic programme guide (EPG) to view information about available programmes.T o view the EPG menu please press EPG button on the remote control. Press “ • ”/“ ” buttons to navigate through channels. Press “ • ”/“ ” buttons to navigate through the progr[...]

English - 16 - Digital T eletext (*) (*) If available in your country • Press the “TXT” button. The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons • and OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital te[...]

English - 17 - (*) If you select Country option as France, you will be asked to set and con fi rm a PIN number . Selected PIN number cannot be 0000. Enter a PIN number and con fi rm it by entering once more. Press OK button to continue. If the two PIN numbers match, your master PIN number will be set. By pressing “ • ” or “ ” button, se[...]

English - 18 - Press • OK button to quit channel list and watch TV . If you have selected the Country option as Netherlands in First T ime Installation,only OK and LOCK options will be displayed. Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following[...]

English - 19 - Analogue Manual Search After selecting search type as analogue, you can use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option. Enter the channel number or frequency using the numeric buttons. Y ou can then press OK button to search. When the channel is located, any new channels that[...]

English - 20 - A warning screen will appear . Select • YES to delete, select No to cancel. Press OK button to continue. Renaming a Channel Select the channel that you want to rename and • select Edit Name option. Press OK button to continue. Pressing “ • ” or “ ” button moves to the previous/ next character . Pressing “ ” or “ ?[...]

English - 21 - selection menu, while info banner is displayed on the screen. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000 or PIN that you have previously de fi ned during the fi rst time installation(for France only)). “ Enter PIN ” will be displayed on the scr[...]

English - 22 - Viewing Photos via USB When you select Photos from the main options, available image fi les will be fi ltered and listed on this screen. Jump (Numeric buttons) : Jump to selected fi le using the numeric buttons. OK : Views the selected picture in full screen. Up/Down: Navigate. Slideshow ( button) : Starts the slideshow using all [...]

English - 23 - Recordings Library IMPORT ANT : T o view recordings library , you should fi rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. T o view the list of recordings, select “ Recordings Library ” and press th[...]

English - 24 - Instant Recording IMPORT ANT : T o record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available. Press • (RECORD) button to start recording an event instantly while watching a progr[...]

English - 25 - Changing Image Size: Picture Formats Y ou can change the aspect ratio (image size) of • the TV for viewing the picture in different zoom modes. Press • “SCREEN” button repeatedly to change the image size. Available zoom modes are listed below . Auto When AUTO is selected, the aspect ratio of the screen is adjusted by the info[...]

English - 26 - Con fi guring Picture Settings Y ou can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Operating Picture Settings Menu Items Press “ • ” or “ ” button to highlight a menu item. Use “ • ” o[...]

English - 27 - V Position : This item shifts the image vertically towards the top or bottom of the screen. Dot Clock : Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase : Depending on the resolution and scan frequency that you[...]

English - 28 - Language : Con fi gures language settings. Parental : Con fi gures parental settings. Timers : Sets timers for selected programmes. Date/Time : Sets date and time. Sources : Enables or disables selected source options. Other Settings : Displays other setting options of the TV set. Using a Conditional Access Module IMPORT ANT : Inse[...]

English - 29 - Language Settings In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. Notes: Sy[...]

English - 30 - Timers T o view Timers menu, press “MENU” button and select Settings icon by using “ ” or “ ” button. Press OK button to view Channel List menu. Use “ ” or “ ” button to highlight Timers and press OK to continue: Setting Sleep Timer This setting is used for setting the TV to turn off after a certain time. Highligh[...]

English - 31 - Note: If the Country option is set to France, you can use 4725 as the default code. After you enter the pin, a pop-up menu appears on the screen to ensure that the hard disk should be formatted, select “YES” and press OK to format the hard disk. Select “NO” and press OK to cancel. Ensure you back up important recordings befor[...]

English - 32 - Menu Timeout : Changes timeout duration for menu screens. Scan Encrypted Channels : When this setting is on, search process will locate the encrypted channels as well. If it is set as Off , encrypted channels will not be located in automatic search or manual search. If the country option in the First T ime Installation/Other Settings[...]

English - 33 - T eletext The teletext system transmits information such as news, sports and weather on your TV . Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. T eletext function buttons are listed below: “ ” T eletext / Mix : Activates teletext m[...]

English - 34 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1080. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning OSD w[...]

English - 35 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information. Index Resolution Frequency 1 640x400 70Hz 2 640x480 60Hz-66Hz-72Hz -75Hz 3 800x600 56Hz-60Hz-70Hz- 72Hz -75Hz 4 832x624 75 Hz 5 1024x768 60Hz-66Hz-[...]

English - 36 - Appendix D: Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio ( Maximum resolution/Bit rate etc. ) Movie .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 MAX 1920x1080 @ 30P 20Mbit/sec .dat MPEG1, 2 MPEG2 .vob MPEG2 .mkv H.264, MPEG1,2,4 EAC3 / AC3 .mp4 MPEG4, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.[...]

English - 37 - Appendix E: Software Upgrade • Y our TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrad[...]

English - 38 - Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models T ransmission standard: DVB-T . MPEG-2, MPEG-4 Demodulation: COFDM with 2K/8K FFT mode FEC: all[...]

English - 39 - Dimensional Drawings 773 522 490 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 39 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 39 25.04.2012 13:32:15 25.04.2012 13:32:15[...]

English - 40 - End of life disposal A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 40 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 40 25.04.2012 13:32:22 25.04.2012 13:32:22[...]

English - 41 - Installing the Stand 1. Sharp T elevision 2. Stand Cover 3. Stand IMPORT ANT Please read the following information carefully before attaching the stand to your new Sharp T elevision. Installing the Stand ! Before fitting the stand, ensure that the TV is unplugged from its power source. ! Place the Sharp T elevision (1) on a soft, sta[...]

English - 42 - Uninstalling the Stand IMPORT ANT Please read the following information carefully before detaching the stand of your Sharp T elevision. Uninstalling the Stand ! Before detaching the stand, ensure that the TV is unplugged from its power source. ! Place the Sharp T elevision on a soft, stable and flat surface, facing down. ! Unscrew ge[...]

English - 43 - Screw Dimensions L D Model D L Item Number VESA Installation of the Screw LC-32LE240E Ø4 30 8 200 x 100 (W x H) T o the wall M4 18 4 T o the product A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 43 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075804_50219215.indd 43 25.04[...]