Sharp LC-70LE857RU manuale d’uso

MODEL LC-80LE857E LC-80LE857RU LC-80LE858E LC-80LE857EN LC-80LE857KN LC-70LE857E LC-70LE857RU LC-70LE858E LC-70LE857EN LC-70LE857KN LC-60LE855E LC-60LE857E LC-60LE857RU LC-60LE858E LC-60LE855KN LC-60LE857EN OPERA TION MANUAL LCD COLOUR TELEVISION[...]

ASA CE Statement: Hereby , SHARP Electronics declares that this bundled Wireless LAN USB adapter is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www .sharp.eu/documents-of-conformity NOTE This bundled Wireless LAN USB adapter is designed[...]

1 Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV pr oduct. T o ensure safety and many years of trouble-fr ee operation of your product, please r ead Important safety precautions car efully before using this pr oduct. Contents Intr oduction [ ENGLISH ] Introduction .........................................................[...]

2 Introduction Important safety precautions • Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the pr oduct. Use a damp cloth to clean the product. Do not use liquid cleaners or aer osol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty . T o protect the panel, do not use a chemical cloth to clean it. [...]

3 Introduction Caring for the front panel • T urn off the main power and unplug the AC cord fr om the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). T o protect the fr ont panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). [...]

4 Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) Pages 7 and 9 Page 7 Stand unit ( x 1) For 60/70 inch models For 80 inch models Page 5 Page 6 Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) AC cord ( x 1) (For 80 inch models only) Page 65 Page 10 Initial setup guide (printed document) Important safety precautions (pri[...]

5 Attaching the stand unit (for 60/70 inch models) • Before attaching (or detaching) the stand, unplug the AC cor d. • Before performing work, spr ead cushioning over the surface on which you will be laying the TV . This will prevent it fr om being damaged. • Be sure that two or mor e persons attach the stand. CAUTION • Attach the stand in [...]

6 Attaching the stand unit (for 80 inch models) • Before attaching (or detaching) the stand, unplug the AC cor d. • Before performing work, spr ead cushioning over the surface on which you will be laying the TV . This will prevent it fr om being damaged. • Be sure that two or mor e persons attach the stand. CAUTION • Attach the stand in the[...]

7 Using the remote contr ol unit Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover . 2 Insert the two supplied “AAA” s[...]

8 TV (front/side view) Illumination LED* 1 Remote control sensor (Page 7) OPC sensor (Page 36) a (Standby/ON) MENU (Menu) b (Input source) :r/s (Programme [Channel]) i+/- (V olume) This panel emits a signal towards the 3D glasses you wear when viewing 3D images. Refer to page 76 for details. I 3D mode: Blue illumination 2D mode: White illumination [...]

9 Remote control unit 4 5 3 6 7 8 11 12 13 10 2 11 5 14 16 17 18 19 21 22 23 24 92 0 LC-60LE855E LC-60LE857E/RU LC-60LE858E LC-70LE857E/RU LC-70LE858E LC-80LE857E/RU LC-80LE858E 25 LC-60LE855KN LC-60LE857EN LC-70LE857EN/KN LC-80LE857EN/KN Important information: Satellite services are only available for the 857 model series. 1 >a (Standby/On) (Pa[...]

10 Operation overview Follow the steps below one by one when using the TV . Some steps may not be necessary depending on your TV installation and connection. 1. Preparation — Connecting the TV w For 60/70 inch models w For 80 inch models q q p r q o n NOTE • The cable tie can be moved from to . • Place the TV close to the AC outlet, and keep [...]

11 3. Daily operation 1 T ur n on/off the TV (Page 19) • Y ou can turn on/off the power using both the remote contr ol and the TV . 2 Switch between digital, satellite and analogue broadcast (Page 19) 3 Change channels (Page 19) • Y ou can also select a channel from “HOME” > “CH list”. 4 Select a programme using EPG (Pages 22 _ 24) ?[...]

12 Inserting the CA card into the CI module NOTE • It takes a few minutes to certify the licence key when you insert a CA card into the CI+ compatible CI module for the first time. This process may fail when ther e is no antenna input or you have never run “Auto installation”. • The CI+ compatible CI module sometimes upgrades its firmware. [...]

13 Quick guide Using the HOME screen Y ou can easily launch this “HOME” screen to enjoy Internet connection and Home network functions and to perform settings for the TV . LCFONT This product is embedded with LC Font technology , which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. 1 Display th[...]

14 Using the Menu screen Y ou need to call up the OSD to perform settings for the TV . The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Display the Menu screen  Go to “TV Menu”. • Y ou can also display the Menu screen via the HOME menu screen (Page 13). Selecting in the Menu  Press [...]

15 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizar d appears. Follow the menus and make the necessary settings one after another . Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? E Is the MAIN POWER switch turn[...]

16 Digital broadcast setting Press c/d to select “T errestrial” or “Cable”, and then press ; . T errestrial Cable E Searching for terr estrial broadcasts The TV searches for , sorts and stores all the receivable TV stations accor ding to their settings and the connected antenna. • T o abort the initial auto installation in progress, press[...]

17 Searching for satellite br oadcasts (857 series only) Press a/b to select “Satellite sear ch”, and then press ; . Digital search Analogue search Satellite search • The antenna connection setting screen is displayed. Single satellite 2 satellites on toneburst switchbox Max. 4 satellites on DiSEqC multiswitch Communal satellite system NOTE ?[...]

18 Checking signal strength and channel strength (DVB-T/T2/C/S*/ S2*) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good r eception while checking the antenna setup screen. * 857 series only 1 Go to “TV Menu” > “Setup” > “View setting” > ?[...]

19 Daily operation Switching on/off T urning on/off the power 1 T ur n on ( ; )/off ( a ) the MAIN POWER switch on the rear of the TV (Page 8). 2 T o turn on/off the TV , press a on the TV or >a on the remote contr ol unit. NOTE • When turning off the power using the MAIN POWER switch on the rear of the TV , EPG data will be lost. Standby mode[...]

20 Selecting a sound mode E DTV/SA T mode If multi sound modes are r eceived, each time you press 7 the mode switches as follows. Audio (ENG) STEREO L/R LR L R CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed. Audio (ENG) STEREO L/R LR L R NOTE • The sound mode scr[...]

21 Favourite Channel Information Before installation This function allows you to group your favourite channels in a separate list. Pre-setting “My favourite” in advance allows you to select your favourite channels more conveniently . NOTE • “My Favourite” can only be used for DTV and SA T(*) modes, a separate list will be stored for each [...]

22 EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SA T/RADIO/DA T A, view detailed information about them and tune to an event currently on-air . Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations, select “Y es”. The EPG data must be autom[...]

23 Selecting a programme using EPG The illustrations on this page are explained using thr ee digit services. Display/Close the EPG screen Press EPG . Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE • Y ou can also display the EPG screen from “TV Menu” > “EPG” > “EPG”. Select a programm[...]

24 Timer setup using EPG The TV can be switched to a programme or start recor ding for USB-recor ding at the set time. 1 Press EPG . 2 Press a/b/c/d to select the pr ogramme you want to set, and then press ; . Back to EPG Watch No Record Next 3 Press c/d to select “W atch” or “Record”, and then press ; . • If you select “No”, the TV r[...]

25 T eletext What is teletext? T eletext broadcasts pages of information and entertainment to specially equipped TV . Y our TV receives teletext signals br oadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme pr eviews are among the many services avail[...]

26 W atching TV MHEG-5 application (UK only) Some services bring you programmes with the MHEG application encoded, letting you experience DTV interactively . When provided, the MHEG-5 application will start when you press m . NOTE • MHEG may not be displayed properly in 3D mode. • Y ou can view some MHEG-5 content even if you do not perform “[...]

27 Introduction to connections The TV is equipped with the terminals as shown below . Find the cable corresponding the TV’ s terminal and connect the device. E Before connecting ... • Be sure to turn off the TV and any devices befor e making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully r ead the operatio[...]

28 Video connections HDMI connection Example of connectable devices E DVD player/recor der E Blu-ray player/recor der E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/r ecorder . The digital picture and sound data ar e transmitted without data compression and ther efore lose none o[...]

29 Connecting external devices SCART connection YP B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recor der n  SCART cable (commercially available) NOTE • Regarding the external output: − Y ou can record pr ogrammes viewed on the TV with an external recording device by connecting the external outpu[...]

30 VIDEO connection Example of connectable devices E VCR E DVD player/recor der E Game console E Camcorder Y ou can use the EXT 2 terminal when connecting to a game console, camcorder , a DVD player/recor der or other device. n  A V cable (commercially available) Audio connections Speaker/amplifier connection Connect an amplifier with external s[...]

31 Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD player/recor der , Blu-ray player/recor der) using a single remote contr ol unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recor der a[...]

32 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recor der that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS recor der AQUOS AUDIO speaker system AQUOS BD player[...]

33 AQUOS LINK setup Basic operation Go to “TV Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on an[...]

34 T op menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recor der . 1 Press a/b to select “T op menu/title list”, and then press ; . • The linked recor der now powers on and the TV automatically selects the appropriate external input source. • The title list data from the connected AQUOS BD player[...]

35 AQUOS LINK Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an MHL-compatible cable. T o connect the TV to your MHL-compatible smartphone, be sure to use an MHL- compatible cable (commercially available). • Y ou can view pictures and video on a lar [...]

36 Picture settings Go to “TV Menu” > “Setup” > “Picture”. Setup A V mode Picture Clear Picture Processing CH list :Back :Enter Menu Backlight OPC [Off] Picture A V mode “A V mode” gives you several viewing options to choose from to best match the system envir onment, which can vary due to factors like room-brightness, type of[...]

37 Picture Picture adjustments Adjusts the picture to your pr eference with the following picture settings. Adjustment items Selectable items c (Cursor) d (Cursor) Backlight The screen dims The screen brightens 3D brightness boost Refer to page 76 for details. Contrast For less contrast For more contrast Brightness For less brightness For mor e bri[...]

38 Game type Adjusts the images of fast moving video games to be clearer . Item Standard Optimises pictur e quality for standard video games. High motion Produces a sharp pictur e from the original slow-moving picture in a video game. Sub pixel control 2 Enables smoother diagonal lines through detailed dot control. Item Advanced Produces smoother d[...]

39 Audio settings Go to “TV Menu” > “Setup” > “Audio”. Setup Bass Auto volume Audio T reble [Off] ST ANDARD CH list :Back :Enter Menu Balance L30 R30 Audio Auto volume Differ ent sound sources sometimes do not have the same volume level, such as a programme and its commercial br eaks. This function reduces this problem by equalizi[...]

40 Power save settings Go to “TV Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [On] ECO ECO picture contr ol This function automatically detects the image source and decr eases the power consumption while keeping the brightness [...]

41 View settings Go to “TV Menu” > “Setup” > “View setting”. Setup Network setup Auto installation View setting Channel settings CH list :Back :Enter Menu Select recording device View setting Auto installation The TV automatically detects and stores all available services in your area. This function also allows you to perform the [...]

42 Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or r emote control unit. Delete Press Y button. The selected service is deleted. If you want to watch th[...]

43 Analogue setting Y ou can reconfigur e the analogue TV channels settings automatically or manually . E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system. E Manual adju[...]

44 Individual setting — PIN View setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed. Go to “TV Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”. NOTE • PIN input is requir ed when executing “PIN”. The default PIN is “1234”. T o reset the PIN sett[...]

45 Individual setting — Language View setting Digital audio language Set up to three pr eferred multi audio languages to display if the audio languages are available. Go to “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio languages Each time you pre[...]

46 Optional features settings Go to “TV Menu” > “Setup” > “Option”. Setup Option for view Option 3D setup CH list :Back :Enter Menu T erminal setting Colour system Selecting the picture size manually Option Wide mode Y ou can select the picture size. Selectable pictur e size varies with the type of signal received. 1 Go to “TV M[...]

47 T erminal setting Option Digital audio output This function allows you to select the digital audio signal type. Go to “TV Menu” > “Setup” > “Option” > “T erminal setting” > “Digital audio output”. Item PCM T o stereo audio system Bitstream T o multi-channel Dolby Digital, DTS audio system Option Audio select When [...]

48 Option Headphone/Audio out select Y ou can select which device is used for outputting audio. Go to “TV Menu” > “Setup” > “Option” > “T erminal setting” > “Headphone/Audio out select”. Item Headphone Output audio through headphones. Audio out Output audio through an A/V r eceiver or surround audio contr oller . CAU[...]

49 Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “TV Menu” > “Setup” > “Option” > “Illumination”. Item Off The LED is not illuminated. Standby The LED is illuminated while the TV is in standby mode. W atch The LED is illuminated while you watch TV .[...]

50 Option Game play time This function allows you to display the elapsed time on the screen when “A V mode” is set to “GAME”. Go to “TV Menu” > “Setup” > “Option” > “Game play time”. Item On Under connecting a game console to the TV , the elapsed time is displayed in 30-minute increments after you start playing a ga[...]

51 USB-recor ding Y ou can enjoy DTV/SA T recording or playback by connecting a commercially available USB HDD to the TV . • USB-recor ding does not work for A TV , external inputs, data broadcasts, radio br oadcasts or network applications. Connecting a USB HDD Connect a commercially available USB HDD to the USB port of the TV . • USB storage [...]

52 How to operate USB-recor ding Y ou can enjoy DTV/SA T recording or playback by connecting a commercially available USB HDD to the TV . CAUTION • Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recor ding timer setting or USB- recor ding. • When the AC cord is unplugged and the MAIN POWER switch is turned off: − The U[...]

53 USB-recor ding Y ou can recor d the programme you ar e watching to the register ed USB HDD. Starting USB-recor ding Press REC E . • The TV starts USB-recor ding. NOTE • Y ou can also operate from the control panel by pr essing CONTROL . • Y ou cannot switch the channel or the input source during USB-recor ding. • During USB-recor ding, t[...]

54 Time shift playback Playback recor ded scenes of the programme being recor ded. Press d during r ecording. • Press H to return the scene that is broadcasting. NOTE • Y ou can also operate from the control panel by pr essing CONTROL . • Time shift playback may take a few moments to start. • Time shift playback will stop and the TV will re[...]

55 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory , USB card r eader (Mass Storage Class), USB HDD) or Home network server . NOTE • T o connect a Home network server , refer to Network setup (Page 64). • This function may not[...]

56 Viewing enlarged photos Buttons for enlarged photo display operation (When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory . 6 Return to the thumbnail selection screen. 3D Switch between 2D and 3D modes. R button Rotate the photo by 90 degrees to the left. G button Rotate the photo by 90[...]

57 Video mode Buttons for file selecting operations (When using USB media mode) Buttons Description ; When selecting a folder icon: Enter this directory . When selecting a video file: Play the video. a/b/c/d (Cursor) Select a desired item. 6 All*: Return to the previous screen. Folder*: Return to the upper folder . When the top folder is displayed,[...]

58 View setting DivX® setup This is the function to confirm your registration code. Y ou need to register the code at www .divx.com. Go to “TV Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration Y ou can find your registration code on this menu. Y ou need to register the TV at www .divx.com before [...]

59 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminal  HDMI-certified cable (commercially available) PC HDMI 2 terminal*  ø 3.5 mm stereo minijack cable (commercially available)  DVI/HDMI cable (commercially available) * When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on [...]

60 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” fr om the “INPUT” menu, and then press ; . 2 G[...]

61 PC compatibility chart Resolution Horizontal frequency V ertical frequency Analogue (D-Sub) Digital (HDMI) VESA standard VGA 640 x 480 31.5 kHz 60 Hz ✔✔✔ SVGA 800 x 600 37.9 kHz 60 Hz ✔✔✔ XGA 1,024 x 768 48.4 kHz 60 Hz ✔✔✔ WXGA 1,360 x 768 47.7 kHz 60 Hz ✔✔✔ SXGA 1,280 x 1,024 64.0 kHz 60 Hz ✔✔✔ SXGA+ 1,400 x 1,050 [...]

62 PC control of the TV • When a programme is set, the TV can be contr olled from the PC using RS-232C or IP . The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cr oss type), ETHERNET cable[...]

63 Command list CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (ST ANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) IA V D *__ _ EXT 1 _ 3 (1 _ 3), HDMI 1 _ 4 (4 _ 7), PC (8) CHANNEL D C C H * * _ _ TV DIRECT CHANNEL (1 [...]

64 Connecting to the network T o enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. Y ou can also connect the TV to your Home network server through a r outer or access point. The TV connection to the router can either be wir ed or wireless. NOTE • If you choose a wired connection to the [...]

65 Wireless installation Use the wireless LAN USB adapter supplied with the TV . E Wireless connection overview  PC  Wireless LAN router/access point  Wireless LAN USB adapter (supplied)  Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much fr ee space around the device for best performance. [...]

66 What is Net TV? Net TV offers internet service and websites tailored for your TV . Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie fr om a video store* and much more. Net TV pr ovides variety of services for each country . Y ou can brow[...]

67 Net TV E Reload Refreshes the page you ar e browsing. If an err or occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ; . E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 400 : Adjust END : Exit 1 Select “Zoom”, and then press ; . 2 Press c/d to adjust the displa[...]

68 Y ou can enjoy 3D-supported images on this TV when you wear 3D glasses (AN- 3DG40), sold separately . T o produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV . NOTE • Refer to the operation manual of the 3D glasse[...]

69 Enjoying 3D image viewing Preparing for the 3D glasses Supplied accessories Make sure the following accessories ar e provided with the 3D glasses. 3D glasses x 1 Nose pad* (small x 1, lar ge x 1) Glasses case x 1 Cleaning cloth x 1 Operation manual * Use the 3D glasses nose pad as needed. The small nose pad is already attached. NOTE • The illu[...]

70 Using the 3D glasses Before using the 3D Glasses Before using the 3D glasses for the first time, remove the insulating sheet attached to them. Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a lar ge and small nose pad. Removing the nose pad Attaching [...]

71 Replacing the Battery The battery has an expected service life of approximately 75 hours. • When replacing the button battery , use only the designated battery (Maxell branded CR2025 lithium button battery). 1 Use the tip of a ballpoint pen or similar object to press in on the lock. 2 While pressing in on the lock, place your fingertip in the [...]

72 Enjoying 3D image viewing Cautions for 3D image viewing 3D glasses lenses • Do not apply pressur e to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses. • Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may damage the 3D glasses and reduce the quality of the [...]

73 Display format for 3D and 2D images Image for input signals Selectable mode Description 3D mode (using the 3D glasses) 2D s 3D • Converts normal 2D images into 3D images. Side by Side • Creates 3D images fr om 3D images displayed side by side. The image is split into a left and right image, and then the images are str etched and displayed se[...]

74 Viewing 3D images NOTE • Refer to the operation manual of the 3D glasses for details regar ding usage. • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be detected automatically The image signal may contain a 3D identific[...]

75 W atching 2D images in 3D Y ou can convert normal 2D images into 3D images. 1 Press 3D . 2 Press c/d to select “2D s 3D”, and then pr ess ; . 3 T ur n on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen once per hour . • When the TV conver[...]

76 3D brightness boost Y ou can adjust the backlight of the TV for 3D image viewing. Item High The screen brightens Middle Low The screen dims NOTE • When “High” or “Low” is selected, “OPC”, “Backlight” and “Range of OPC” are not available. • The “3D brightness boost” is not available for 2D mode. • The “3D brightnes[...]

77 Enjoying 3D image viewing Specifications — 3D glasses (sold separately) T r oubleshooting — 3D Images Product 3D Glasses Model number AN-3DG40 Lens type Liquid crystal shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx. 100 hours of continuous use Dimension (W x H x D) 171.2 × 46.0 × 162.4 mm W eight [...]

78 Appendix T r oubleshooting Problem Possible solution • No power . • T urn on ( ; ) the MAIN POWER switch on the rear of the TV (Page 19). • Is the AC cord disconnected? • Check if you pressed a on the TV . • The TV cannot be operated. • External influences such as lightning, static electricity , etc., may cause improper operation. In[...]

79 Appendix Reset the PIN 1 Go to “TV Menu” > “Setup”. 2 Press a/b to select “Auto installation”, “Pr ogramme setup”, “PIN”, “Parental rating” or “Reset”, and then pr ess ; . The PIN input window will display . 3 Press and hold both :r and i+ on the TV simultaneously until the message appears on the screen. NOTE • W[...]

80 Updating your TV via DVB-T/T2/ C/S*/S2* Ensure that your TV softwar e version is always up to date. From time to time SHARP will make updated TV base software and DVB softwar e available. * 857 series only View setting Download setup Go to “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Standby search[...]

81 Information Receiver report Display reports r egarding failur es and changes for timer settings. Go to “TV Menu” > “Setup” > “Information” > “Receiver report”. Information Identification Y ou can check the TV ID on the screen for r eporting to customer service. Go to “TV Menu” > “Setup” > “Information” [...]

82 W arning regarding basic use Cautions regar ding use in high and low temperature envir onments • When the TV is used in a low temperature space (e.g., r oom, office), the pictur e may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperatur e returns to normal. • Do not leave the TV in a[...]

83 Software licences for Net TV This product includes the Opera™ browser . • This product contains fonts pr ovided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. register ed in the United States Patent and T rademark Of fice and may be registered in certain jurisdictions. • Tioga™ is a trademark of Monotype [...]

84 Appendix Specifications Item Model: LC-60LE855E/LC-60LE855KN/ LC-60LE858E/LC-70LE858E/ LC-80LE858E Model: LC-60LE857E/LC-60LE857RU/ LC-60LE857EN/LC-70LE857E/ LC-70LE857RU/LC-70LE857EN/ LC-70LE857KN/LC-80LE857E/ LC-80LE857RU/LC-80LE857EN/ LC-80LE857KN LCD panel 203 cm (80 o ) X-Gen panel 177 cm (70 o ) X-Gen panel 152 cm (60 o ) X-Gen panel Resol[...]

85 Specifications (Wireless LAN USB adapter) Product name Dual Band 802.11n USB2.0 adapter Standard IEEE 802.11a/b/g/n Host interface USB2.0 Frequency band 2412 _ 2484 MHz 5150 _ 5850 MHz Security Static WEP (64/128 bit, key index 1 only) WP A-PSK (TKIP) WP A2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 M[...]

86 Environmental specifications Item 60 o /70 o /80 o I On-mode (W) (in home-mode) 108 W/142 W/178 W J Energy-Save-Mode (W) Advanced 78 W/98 W/125 W K Standby-Mode (W) 0.2 W/0.2W/0.2W L Off Mode (W) MAIN POWER switch 0.01 W or less M Annual Energy Consumption (kWh) 158 kWh/207 kWh/ 260 kWh M Annual Energy Consumption Energy-Save-Mode (kWh) Advanced[...]

87 LC-80LE857E/LC-80LE857RU/LC-80LE858E/LC-80LE857EN/ LC-80LE857KN The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. W e recommend you to contact qualified service per onnel when installing it. SHARP is not responsible f[...]

88 Rating table for child lock User -adjusted rating Broadcasted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ —————————————— Parental approval pr ef. ✔✔✔✔✔ —————————— X-rated ✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔ User -adjusted rating Broadcasted rating Uni[...]

89 Appendix Dimensional drawings (385) (58) (28) *2 (178) LC-60LE855E LC-60LE857E LC-60LE857RU LC-60LE858E LC-60LE855KN LC-60LE857EN (176) (640) (1378) (848) (810) (748) *1 (451) (1329) *1 (400) (400) (200) (575) (385) (58) (28) *2 (178) LC-70LE857E LC-70LE857RU LC-70LE858E LC-70LE857EN LC-70LE857KN (251) (640) (1578) (971) (932) (866) *1 (513) (15[...]

90 Appendix LC-80LE857E LC-80LE857RU LC-80LE858E LC-80LE857EN LC-80LE857KN (59) (1771) *1 (1825) (34) *2 (443) (207) (820) (600) (441) (1103) (1066) (261) (580) (200) (400) (996) *1 I Active area J Thinnest part (except of terminal height) NOTE • Dimensions do not include protrusions such as scr ews and some parts.[...]

91 Appendix EU Energy Label for T elevisions On 30 November , 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regar d to ener gy labelling of televisions. The Regulation entered into for ce on 20 December 2010 and applies in all Member States. Manufacturers and dealers ar e requir ed to display the la[...]

13P05-PL-NG[...]