Sharp XG-V10WU manuale d’uso

OPERA TION MANUAL MODEL XG-V10WU LCD PROJECTOR Important Information Setup & Connections Operation Buttons Basic Operation Maintenance & T roubleshooting Appendix Useful Features & Network Function Lenses are sold separately .[...]

E-1 Important Information IMPOR T ANT For your assistance in r eporting the loss or theft of your Color LCD Pr ojector , please recor d the Serial Number located on the bottom of the pr ojector and retain this information. Before recycling the packaging, please be sur e that you have checked the contents of the carton thoroughly against the list of[...]

E-2 Important Information Electrical energy can perfor m many useful functions. This pr oduct has been engineered and manufactur ed to ensure your personal safety . But IMPROPER USE CAN RESUL T IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this LCD Pr ojector , observe the following basic rule[...]

E-3 Important Information IMPOR T ANT SAFEGU ARDS AVOID EXPOSURE - LASER RADIATION IS EMITTED FROM THIS APERTURE. CAUTION LASER RADIATION- DO NOT STARE INTO BEAM WAVE LENGTH : 650nm MAX. OUTPUT : 1mW CLASS II LASER PRODUCT "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 TEL : 1-800-B[...]

E-4 Important Information T emperature Monitor Function If the projector starts to overheat due to setup problems or a dirty air filter , “ TEMP . ” and “ ” will flash in the lower -left cor ner of the pictur e. If the temperature continues to rise, the lamp will turn off, the TEMPERA TURE WARNING indicator on the projector will flash, and [...]

E-5 Important Information Outstanding Features 1. High-end LCD Pr ojector with Ultra High Brightness • 200 W UHP Lamps Uses two 200 W UHP lamps for excellent color uniformity and ultra high brightness. • Newl y developed prism enables efficient combination of light fr om two lamps. A light axis separation and synthesis prism developed by Sharp [...]

E-6 Important Information Outstanding Features 5. Netw ork Capability • Self-Diagnosis/Pr ojector Status Self-diagnosis/Projector status function sends e-mail messages to a specified computer about lamp usage time and any malfunctions. • Multiple & Gr oup Projector Contr ol Up to 250 pr ojectors can be controlled over a network. Projector R[...]

E-7 Important Information Contents Impor tant Inf ormation Intr oduction ............................................. 1 IMPOR T ANT SAFEGU ARDS ................... 2 Outstanding Features ............................. 5 Contents ................................................... 7 Ho w to Access the PDF Operation Manuals ..........................[...]

E-8 Important Information Contents Basic Operation Useful Features & Netw ork Function Useful Features ....................................... 59 Locking the Operation Buttons on the Projector .................................... 59 Deselecting Inputs .................................... 59 Selecting the T ransmission Speed (RS-232C) ..........[...]

E-9 Important Information Ho w to Access the PDF Operation Manuals PDF operation manuals in several languages ar e included in the CD-ROM. T o utilize these manuals, you need to install Adobe Acr obat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it fr om the Internet (http://www .adobe.com[...]

E-10 Important Information P ar t Names Pr ojector Numbers next to the part names refer to the main pages in this manual where the topic is explained. Front and T op View LENS button POWER buttons (ON/OFF) ENTER button INPUT 1, 2, 3 button FREEZE button ENLARGE button UNDO button MUTE button VOLUME buttons (  /  ) INPUT 4, 5, 6 button GAMMA b[...]

E-11 Important Information 14 19 62 17 17 17 18 39 16 14 15 14 62 68 16 3 36 63 P ar t Names Pr ojector Numbers next to the part names refer to the main pages in this manual wher e the topic is explained. Side and Rear Vie w Speakers Exhaust vent Remote control sensor LED display (ID No.) RS-232C INPUT port/ RS-232C OUTPUT port AC socket MAIN POWER[...]

E-12 Important Information P ar t Names Inser ting the batteries 13 Press in on the arro w mark and slide in the direction of the arro w to remo ve the battery cover . 2 Insert two AA size batteries, making sure the polarities match the  and  marks inside the battery compar tment. Insert the side tabs of the battery cover into the slots and p[...]

E-13 Important Information Supplied Accessories Power cord QACCU5013CEZZ RGB cable QCNW-5304CEZZ Remote control RRMCG1564CESA T wo AA size batteries Remote mouse receiver RUNTK0673CEZZ USB mouse control cable QCNW-5680CEZZ PS/2 mouse control cable QCNW-5113CEZZ Extra air filter PFILD0110CEZZ T erminal cover CCOV A1789CE01 CD-ROM UDSKA0020CEN1 LCD p[...]

E-14 Setup & Connections P ower Suppl y Connecting the P ower Cor d Plug the supplied power cor d into the AC socket on the side of the projector . Pr ojecting Computer Images Connecting the Projector to a Computer Y ou can connect your projector to a computer for pr ojection of full color computer images. Connecting to a computer using the sta[...]

E-15 Setup & Connections Projecting Computer Ima ges • This projector uses a 5 BNC computer input to pr event deterioration of image quality . • Connect the R (P R ), G/G sync (Y), B (P B ), HD/C sync and VD cables (sold separately) to the corr ect input terminals on the projector and an RGB switcher (sold separately) connected to the compu[...]

E-16 Setup & Connections Projecting Computer Ima ges Connecting to a computer using the RS-232C Po r t When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cr oss type, sold separately), the computer can be used to contr ol the projector and check the status of the pr ojector . See pages 80, 81 an[...]

E-17 Setup & Connections W atching Video Ima g es and Laser Disc Ima g es Connecting to a VCR, laser disc pla yer and other audio visual equipment using the BNC video Input 1 Connect each BNC connector of a component or video cable to the corresponding BNC INPUT 4 or 5 terminals on the projector . • BNC-RCA adaptors are needed for use with RC[...]

E-18 Setup & Connections W atching D VD and Digital TV Images 1 Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the projector . • BNC-RCA adaptors are needed for use with RCA type cables and sour ces. 2 Connect the other end of the cable to the corresponding terminals on a DVD player or DTV decode[...]

E-19 Setup & Connections P ower ON/OFF Press the MAIN POWER switch on the side of the projector . The POWER indicator lights up red and the projector enters standby mode. • When the main power is not on, the r emote control cannot be used to operate the projector . T urning on the Main P ower TEMP LAMP2 LAMP1 POWER 2 1 Pr ess PO WER ON . • [...]

E-20 Setup & Connections Using the Adjustment Feet Setting Up the Screen Using the Adjustment Feet Rotate feet to adjust height of the pr ojector . • The projector is adjustable up to appr oximately 5 ° from the standar d position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the [...]

E-21 Setup & Connections Adjusting the Pr ojection Distance Position the pr ojector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the pr ojector forward or backward if the edges of the image ar e distor ted. • The projector lens should be center ed in the middle of the screen. If the lens center is[...]

E-22 Setup & Connections Adjusting the Projection Distance AN-L V40EZ Thr ow distance ratio 1.9 to 2.5:1 600  500  400  300  200  150  100  84  72  60  40  480  400  320  240  160  120  80  67  58  48  32  360  300  240  180  120  90  60  50  43  36 [...]

E-23 Setup & Connections Adjusting the Projection Distance AN-L V18MX Thr ow distance ratio 0.9 :1 600  500  400  300  200  150  100  84  72  60  40  480  400  320  240  160  120  80  67  58  48  32  360  300  240  180  120  90  60  50  43  36  24 ?[...]

E-24 Setup & Connections Adjusting the Projection Distance AN-L V26EZ Thr ow distance ratio 1.2 to 1.4 :1 600  500  400  300  200  150  100  84  72  60  40  480  400  320  240  160  120  80  67  58  48  32  360  300  240  180  120  90  60  50  43  36 ?[...]

E-25 Setup & Connections Adjusting the Projection Distance AN-L V36EZ Thr ow distance ratio 1.7 to 2.7 :1 600  500  400  300  200  150  100  84  72  60  40  480  400  320  240  160  120  80  67  58  48  32  360  300  240  180  120  90  60  50  43  36 ?[...]

E-26 Setup & Connections Adjusting the Projection Distance AN-L V55EZ Thr ow distance ratio 2.6 to 3.7 :1 600  500  400  300  200  150  100  84  480  400  320  240  160  120  80  67  360  300  240  180  120  90  60  50  149  11  125  0  99  9  74  10 ?[...]

E-27 Setup & Connections Adjusting the Projection Distance AN-L V80EZ Thr ow distance ratio 3.8 to 5.3 :1 600  500  400  300  200  150  100  84  480  400  320  240  160  120  80  67  360  300  240  180  120  90  60  50  215  7  179  6  143  4  107  7 ?[...]

E-28 Setup & Connections Adjusting the Projection Distance Upper and Lo wer Lens Shift P osition • This projector is equipped with a lens shift function that lets you adjust the pr ojection height. • Adjust to match the setup configuration. Screen size: 100 inches (254 cm) Computer Input: 5:4 AN-L V40EZ as an example –H Screen Upper and L[...]

E-29 Setup & Connections LENS Button Projector 1.2.3 4.5.6 1 , 4 a 4 b 3 2 4 b Remote Control 1 Press LENS to select mode. Each time LENS is pressed, the scr een changes as shown on the left. 2 Press ENTER to display test pattern. 3 Press ∂ / ƒ / ß / © to make adjustments. 4 a. Press LENS until normal scr een appears. b. T o r eset the “[...]

E-30 Setup & Connections Rear Pr ojection • Place a translucent scr een between the projector and the audience. • Use the projector ’ s menu system to reverse the projected image. (See page 56 for use of this function.) • Optimal image quality can be achieved when the pr ojector is positioned perpendicular to the scr een with all feet f[...]

E-31 Operation Buttons 1.2.3 4.5.6 Conference Series Selecting the Input Signal Sour ce Using the Operation Buttons Muting the Sound Press VOLUME  /  to adjust the volume. Press MUTE to temporarily tur n of f the sound. Press MUTE again to tur n the sound back on. 1.2.3 4.5.6 Projector Remote Control Projector Remote Contr ol VOLUME buttons M[...]

E-32 Operation Buttons 1.2.3 4.5.6 1 , 2 This function can be used to superimpose a black screen over the pr ojected image. Blac king out the Projected Ima ge Press BLA CK SCREEN . The screen turns black and “ BLACK SCREEN ” is displayed on the scr een. T o return to the original projected image, pr ess BLACK SCREEN again. • T o use the remot[...]

E-33 Operation Buttons 1.2.3 4.5.6 3 2 1 3 Magnifying a Specific P or tion of an Ima g e s On-screen Display Projector This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. (Slide the MOUSE/ADJUSTMENT switch on the r emote control to the ADJ. position) 1 Press EN[...]

E-34 Operation Buttons Adjusting the Picture Aspect Ratio This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose NORMAL, FULL, DOT BY DOT , BORDER , STRETCH or SMART STRETCH image. 1 Press RESIZE . Each time RESIZE is pressed, the picture mode changes as sho[...]

E-35 Operation Buttons Gamma Correction Function 1.2.3 4.5.6 2 1 2 • Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Four gamma settings are available to allow for differ ences in the images displayed and in the [...]

E-36 Operation Buttons Selecting the Remote Contr ol Mode MOUSE ADJ. MOUSE/ADJUSTMENT switch (Remote control) MOUSE ADJ. Using the Remote Contr ol as a Wireless Mouse The remote contr ol has the following three functions: • Projector contr ol • Wireless mouse • Laser pointer Wireless mouse/ Laser pointer Projector contr ol Operating the Remot[...]

E-37 Operation Buttons Be sure the supplied r emote mouse receiver is connected to your computer . Slide the MOUSE/ADJUSTMENT switch to MOUSE. MOUSE mode b uttons Operating the Remote Contr ol Use as a Wireless Mouse • For one-button mouse systems, use either the LEFT -CLICK or RIGHT -CLICK button. • Press B ACKLIGHT , and the buttons will ligh[...]

E-38 Operation Buttons Connecting the Mouse Receiver Connecting the Remote Mouse Receiver Y ou can use the r emote control as a remote mouse to operate computers compatible with PS/2 or USB type mouse systems. 1.2.3 4.5.6 Conference Series 1 Connect one end of the supplied USB mouse control cable to the cor responding terminal on the computer . 2 C[...]

E-39 Operation Buttons Using as a Laser P ointer Use as a Laser P ointer Slide the MOUSE/ADJUSTMENT switch to MOUSE, and pr ess LASER POINTER ( ) to activate the laser pointer . 1.2.3 4.5.6 Conference Series LASER POINTER MOUSE ADJ. MOUSE/ADJUSTMENT switch • When the button is released, the light automatically goes of f. • For safety reasons, t[...]

E-40 Basic Operation Basic Operations Projector Using the GUI (Graphical User Interface) Men u Screen (GUI) On-screen Displa y 1 INPUT 1, 2 (RGB) or 3 (DIGIT AL) mode 1 INPUT 4, 5 (VIDEO) mode 4 (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU to display the INPUT 1, 2, 3, 4 or 5 mode menu bar . 2 Press [...]

E-41 Basic Operation Menu Bar s Items on the INPUT 1, 2 or 3 Mode Menu Bar Main menu Sub menu Main menu Sub menu Picture Options Options Fine Sync Audio Tint Ⳮ 30 ⳮ 30 Color Ⳮ 30 ⳮ 30 Sharp Ⳮ 30 ⳮ 30 Contrast Lamp 1 Lamp 2 Ⳮ 30 ⳮ 30 Bright Ⳮ 30 ⳮ 30 Red Ⳮ 30 ⳮ 30 Blue Reset Ⳮ 30 ⳮ 30 CLR Temp Progressive Mode Signal Type[...]

E-42 Basic Operation Menu Bar s Items on the INPUT 4 or 5 Mode Men u Bar Main menu Sub menu Main menu Sub menu Picture Options Audio Tint Ⳮ 30 ⳮ 30 Color Ⳮ 30 ⳮ 30 Sharp Ⳮ 30 ⳮ 30 Contrast Lamp 1 Lamp 2 Ⳮ 30 ⳮ 30 Bright Ⳮ 30 ⳮ 30 Red Ⳮ 30 ⳮ 30 Blue Reset Ⳮ 30 ⳮ 30 CLR Temp Progressive Mode Signal Type Ⳮ 3 ⳮ 3 Video C[...]

E-43 Basic Operation Adjusting the Picture Y ou can adjust the projector ’ s picture to your pr efer - ences with the following picture settings. Description of Adjustment Items Projector For less contrast For less brightness For less color intensity Skin tones become purplish For less sharpness For weaker red For weaker blue Selected item For mo[...]

E-44 Basic Operation Adjusting the Picture Projector Remote Control Adjusting the Color T emperature This function can be used to adjust the color temperature to suit the type of image input to the projector (video, computer image, TV br oadcast, etc.). Decrease the color temperatur e to create warmer , reddish images for natural flesh tones. Incr [...]

E-45 Basic Operation Projector Remote Contr ol Selecting the Signal T ype This function allows you to select the input signal type RGB (VIDEO) or COMPONENT for INPUT 1, 2, 4 or 5 port. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . Menu bar and “ Picture ” menu screen appear . GUI operation guide[...]

E-46 Basic Operation When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), inter fer ence may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur , adjust “ Clock ” , “ Phase ” , “ H-Pos ” and “ V -Pos ” for [...]

E-47 Basic Operation Adjusting the Computer Images (RGB menu onl y) Saving and Selecting Adjustment Settings This pr ojector allows you to store up to seven adjustment settings for use with various computers. Once these settings ar e stored, they can be easily selected each time you connect a computer to the pr ojector . Saving the adjustment setti[...]

E-48 Basic Operation Adjusting the Computer Images (RGB menu onl y) Special Mode Adjustment Ordinarily , the type of input signal is detected and the correct r esolution mode is automatically selected. However , for some signals, the optimal resolution mode in “ Special Modes ” on the “ Fine Sync ” menu scr een may need to be selected to ma[...]

E-49 Basic Operation Adjusting the Computer Images (RGB menu onl y) A uto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing A UT O SYNC , or automatically by setting “ Auto Sync ” to “ ON ” in the pr ojector ’ s GUI menu. When “Auto Sync” is set to “ON”: ?[...]

E-50 Basic Operation Adjusting the Sound This projector ’ s audio is factor y pr eset to standard settings. However , you can adjust it to suit your own prefer ences by adjusting the following audio settings. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß / © to select “ Audio ” . 3[...]

E-51 Basic Operation Displa ying Dual Pictures (RGB men u only) Projector Remote Contr ol Picture in Pictur e function allows you to display two pictur es on the same screen. Y ou can display the image input from INPUT 4 or 5 as an inset pictur e overlapping the main picture input fr om INPUT 1, 2 or 3. (Slide the MOUSE/ADJUSTMENT switch on the rem[...]

E-52 Basic Operation Reducing Image Noise (VIDEO menu onl y) Projector Remote Control 3D Digital Noise Reduction (3D DNR) provides high quality images with minimal dot crawl and cr oss color noise. (Slide the MOUSE/ADJUSTMENT switch on the r emote control to the ADJ. position.) 1 Press MENU . 2 Press ß / © to select “ Options (1) ” . 3 Press [...]

E-53 Basic Operation T urning On/Off the On-screen Display This function allows you to turn on or off the on-screen messages that appear during input select. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß / © to select “ Options (1) ” . 3 Press ∂ / ƒ to select “ OSD Display ” ,[...]

E-54 Basic Operation Selecting a Bac kgr ound Image Selecting a Star tup Ima g e (GUI) On-screen Displa y This function allows you to select the image displayed when no signal is being sent to the projector . Description of Backgr ound Images (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß [...]

E-55 Basic Operation Selecting the Econom y Mode (GUI) On-screen Display Projector Remote Contr ol These functions allow you to r educe the power consumption when the projector is in standby mode. Monitor Out/RS-232C Off Function This pr ojector consumes power when using a monitor connected to the OUTPUT port for INPUT 1, 2 and a computer connected[...]

E-56 Basic Operation Selecting the Econom y Mode ID No. Display Off Function The LED ID number display on the rear of the pr ojector , used when controlling multiple pr ojectors, can be turned on or off. Description of ID No. Display (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß / © to s[...]

E-57 Basic Operation Selecting the On-screen Displa y Language Projector (GUI) On-screen Displa y English is the preset language for the On-scr een Display; however , this can be changed to German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ.[...]

E-58 Basic Operation Displa ying the Adjustment Settings This function can be used to display all the adjusted settings on the screen simultaneously . (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß / © to select “ Status ” . 3 Press ENTER to display all the adjustment settings. 4 T o [...]

E-59 Useful Features & Network Function   Loc king the Operation Buttons on the Projector Useful Features This function can be used to lock the use of certain operation buttons on the projector . The user can still operate the projector fully with the r emote control. Description of Ke ylock Le vels 1.2.3 4.5.6 1 , 6 5 2 , 3 , 4 Projector[...]

E-60 Useful Features & Network Function Selecting the T ransmission Speed (RS-232C) 1.2.3 4.5.6 1 , 6 5 2 , 3 , 4 Projector Remote Control This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the baud rate. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 P[...]

E-61 Useful Features & Network Function A password can be set by the user and used with the keylock level to pr event adjustments to cer tain settings on the GUI. • When passwor d is set, you need to enter the password to use “ Lamp Mode ” , “ PRJ Mode ” , “ Stack Setting ” , “ Keylock Level ” , “ Set Inputs ” , “ RS-232[...]

E-62 Useful Features & Network Function   Setting Up the Optional Boar ds Netw ork Function Thr ee optional Expansion Boards fr om Sharp are also available for specialized application. Please see your local Sharp Industrial LCD Pr oducts Dealer for details on these boards. Be sur e to have service personnel install optional boar ds. Boar [...]

E-63 Useful Features & Network Function Contr oling Multiple Pr ojectors with ID Number s 1.2.3 4.5.6 1 , 6 5 2 , 3 , 4 Projector (GUI) On-screen Displa y Remote Control This projector can form a network of up to 250 projectors. T o identify separately and contr ol specified projector , you need to set ID No.. The ID No. you set is displayed on[...]

E-64 Useful Features & Network Function Using the Presentation T ools MOUSE ADJ. Menu Windo w When selecting Sharp default image Red Green Blue Y ellow Orange White Black This projector is equipped with pr esentation tools that can be used to emphasize keypoints within your presentation. (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol[...]

E-65 Useful Features & Network Function Operating the Netw ork Function This pr ojector has outstanding network capability . • Inter net access for self-diagnosis • Multiple and group pr ojector control • Simultaneous multiple projector contr ol 1. Internet access f or self-diagnosis, status information and pre ventive maintenance Interne[...]

E-66 Useful Features & Network Function Operating the Network Function 2. Multiple and gr oup projector contr ol via computer Building A RS-232C RS-232C RS-422 RS-232C RS-232C RS-232C RS-422 Optional RS-422 board RS-422 Control PC Sharp Advanced Presentation Software “ Professional Edition ” 3rd Floor 2nd Floor 1st Floor Video Source 1 Vide[...]

E-67 Useful Features & Network Function Operating the Network Function 3. Sim ultaneous multiple pr ojector control f or stacking and video wall pr ojection INPUT1 INPUT2 INPUT4 INPUT5 OUTPUT Master OUTPUT INPUT1 Distributor INPUT2 INPUT4 INPUT5 OUTPUT Slave OUTPUT DVD Laser Disc RS-232C OUT RS-232C IN RS-232C OUT RS-232C IN Stack Setting Maste[...]

E-68 Useful Features & Network Function Operating the Network Function INPUT1 INPUT2 INPUT4 INPUT5 OUTPUT Master OUTPUT RS-232C OUT INPUT1 Control PC Sharp Advanced Presentation Software “Professional Edition” VIDEO SOURCE2 VIDEO SOURCE1 RGB SOURCE2 RGB SOURCE1 INPUT2 INPUT4 INPUT5 OUTPUT Slave OUTPUT RS-232C IN RS-232C OUT RS-232C IN DVD D[...]

E-69 Maintenance & T roubleshooting TEMP LAMP2 LAMP1 POWER 2 1 Lamp/Maintenance Indicator s Problem • Blocked air intake. • Clogged air filter . • Cooling fan breakdown. • Internal circuit failure. • Burnt-out lamp. • Lamp circuit failur e. • Lamp has been used for over 900 hours. • The filter cover is open. Maintenance Indicato[...]

E-70 Maintenance & T roubleshooting Confirming the Lamp Usage Time Lamp Maintenance Lamp The lamp in this pr ojector operates for approximately 1,000 cumulative hours, depending on the usage envir on- ment. (As the usage envir onment can var y significantly , the projector lamp may not operate for 1,000 hours.) It is recommended that the lamp b[...]

E-71 Maintenance & T roubleshooting This function can be used to set the lamp mode. The mode can be set to double the effective lamp usage time. Description of Lamp Mode (Slide the MOUSE/ADJUSTMENT switch on the remote contr ol to the ADJ. position.) 1 Press MENU . 2 Press ß / © to select “ Options (2) ” . 3 Press ∂ / ƒ to select “ L[...]

E-72 Maintenance & T roubleshooting Replacing the Lamp • Be sure to r emove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of the projector . • T o avoid injury to yourself and damage to the lamp, be sure to car efully follow the steps below . • Replace the lamp more safely by unplugging[...]

E-73 Maintenance & T roubleshooting • This projector is equipped with one air filter to ensur e the optimal operating condition of the projector . • The air filter should be exchanged after every 2,000 hours of use. • Have your nearest Authorized Sharp Industrial LCD Pr oducts Dealer or Service Center exchange the filter (PFILD0110CEZZ). [...]

E-74 Maintenance & T roubleshooting T r oubleshooting Check • Keylock level is set to “ Level A ” or “ Level B ” , preventing operation of some or all buttons. (See page 59.) • When the projector is set to slave, use the buttons on the master pr ojector or change the setting by RS-232C commands from the computer . (See page 63.) •[...]

E-75 Appendix Guide to Eff ective Presentations Electronic pr esentations are one of the most effective tools pr esenters can use to persuade an audience. There ar e several ways to enhance your presentation and maximize your ef fectiveness. The following are guidelines to help you create and deliver a dynamic presentation. a. T ypes of Presentatio[...]

E-76 Appendix Red Blue Green Black Presentation from SHARP O n e o f t h e m o s t c o m m o n m is ta k e s in a n y ty p e o f p r e s e n t a tio n v is u a l is th e s e le c t io n o f ty p e f o n ts th a t a r e t o o s m a ll, to o t h in , o r h a r d to r e a d . • Background colors can subconsciously af fect the audience: Red — incre[...]

E-77 Appendix c. Set-Up When giving a presentation, you need to set the stage both figuratively and literally for success. The way you set up a presentation r oom will have a great impact on the audience ’ s perception of you and your message. By manipulating the placement and use of the following tools, you will impr ove the impact of your prese[...]

E-78 Appendix d. Rehearsing & Delivery • The best time to rehearse is the day or evening befor e, not a couple of hours befor e, and the best place to rehearse is in the actual r oom. Rehearsing a speech in a small office is not the same as standing up in front of 100 people in a hotel ballr oom or classroom. • Due to varying processor spee[...]

E-79 Appendix Connecting Pin Assignments INPUT 1 RGB and OUTPUT (INPUT 1, 2) Signal Input P orts: 15-pin Mini D-sub female connector RGB Input Analog 1. Video input (r ed) 2. Video input (green/ sync on gr een ) 3. Video input (blue) 4. Reserve input 1 5. Composite sync 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. Not connected [...]

E-80 Appendix (RS-232C) Specifications and Command Settings PC contr ol A computer can be used to contr ol the projector by connecting an RS-232C cable (null modem, cr oss type, sold separately) to the pr ojector . (See page 16 for connection.) Comm unication conditions Set the serial port settings of the computer to match that of the table. Signal[...]

E-81 Appendix (RS-232C) Specifications and Command Settings CONTROL CONTENTS INPUT 2 (RGB 2) SIGNAL TYPE : RGB INPUT 2 (RGB 2) SIGNAL TYPE : COMPONENT INPUT 1 (RGB 1) 2D PROGRESSIVE INPUT 1 (RGB 1) 3D PROGRESSIVE INPUT 1 (RGB 1) Film MODE INPUT 2 (RGB 2) 2D PROGRESSIVE INPUT 2 (RGB 2) 3D PROGRESSIVE INPUT 2 (RGB 2) Film MODE INPUT 3 (RGB 3) 2D PROG[...]

E-82 Appendix (RS-232C) Specifications and Command Settings CONTROL CONTENTS SELECT SETTING (1 – 7) RGB HORIZONTAL FREQUENCY CHECK RGB VERTICAL FREQUENCY CHECK AUTO SYNC ON AUTO SYNC OFF AUTO SYNC DISPLAY ON AUTO SYNC DISPLAY OFF BALANCE (  30 –  30) TREBLE (  30 –  30) BASS (  30 –  30) AUDIO DISPLAY AUDIO ADJUSTMENT RESE[...]

E-83 Appendix Wired Remote Contr ol T erminal Specifications Specifications of wired remote contr ol input • ø 3.5 mm minijack • External:  5 V (1 A) • Internal: GND Function and transmission codes • T o operate the mouse, left-click and right-click functions through the wir ed remote contr ol input, connect the cable from the WIRED REM[...]

E-84 Appendix Computer Compatibility Char t Horizontal Frequency: 15 – 126 kHz V er tical Fr equency: 43 – 200 Hz Pixel Clock: 12 – 230 MHz Compatible with sync on green and composite sync signals UXGA (1,600  1,200) compatible in advanced intelligent compr ession AICS (Advanced Intelligent Compr ession and Expansion System) resizing techn[...]

E-85 Appendix 16 5 / 16 (414.5) 8 47 / 64 (221.85) 2 15 / 16 (74.5) 1 1 / 64 (25.65) 3 7 / 32 (81.85) 24 29 / 64 (621.3) 17 31 / 64 (444.2) 5 / 32 (3.9) 1 21 / 32 (42) 14 51 / 64 (376) Dimensions Rear View T op View Side View Side View Front Vie w Bottom View Units: inches (mm)[...]

E-86 Appendix Specifications Pr oduct type Model Video system Display method LCD panel Projection lamp Contrast ratio Video input signal S-video input signal Component input signal Horizontal resolution RGB input signal Pixel clock V er tical fr equency Horizontal frequency Computer control signal Speaker system Rated voltage Input current Rated fr[...]

E-87 Appendix Glossary Anti-aliasing digital keystone correction Function to digitally correct a distorted image when the pr ojector is set up at an angle. Aspect ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There ar e also wide images with an aspect ratio of 16 : 9 and 21 : 9. A uto sync[...]

E-88 Appendix Inde x A AC socket ......................................................................... 14 Adjusting the Pictur e ........................................................ 43 Adjustment Feet ............................................................... 20 ADJUSTMENT switch ....................................................... [...]

E-89 Appendix SHARP CORPORA TION[...]