Sherwood R-772 manuale d’uso

R-772(A) 2007.8.16 5:21 PM 페이지 1[...]

ENGLISH 2 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instruction[...]

3 ENGLISH Introduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Thi[...]

ENGLISH 4 CONTENTS • SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

5 ENGLISH System Connections • Pleas be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cor[...]

• There are three types of video jacks (COMPONENT, S- VIDEO, (composite) VIDEO) for analog video connections and the HDMI connectors for digital video and audio connections. Connect them to the corresponding video jacks according to their capability. • For your reference, the excellence in picture quality is as follows : "HDMI” > &quo[...]

ENGLISH 7 ENGLISH Continued  Relationship between the video input signal and the video output signal * 1 : Component video signal can be output from the COMPONENT MONITOR OUT jacks only. In this case, the OSD menu and the momentary OSD cannot be displayed. * 2 : The video signal set in the VIDEO MODE menu can be output from all the types of MONI[...]

8 • For analog audio recording, the ROOM 2 OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc. as shown beside. • Use these jacks to connect the corresponding outputs of a DVD player or external decorder, etc. that has 6, 7 or 8 channel analog audio outputs. • In case of 6 or 7 channel outputs, do[...]

9 • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc. • If the component wit[...]

ENGLISH 10 • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to[...]

11 Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows :  Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. • Place the cent[...]

ENGLISH 12 • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers. • Because this receiver c[...]

• This receiver incorporates USB as well as RS-232C terminal that may be used in the future to update the operating software so that it will be able to support new digital audio formats, external control by using an external device and the like. • Connect either USB or RS-232C terminal to your PC (you don't need to do both).  Notes: •[...]

ENGLISH 14 • These outlets are switched on (power-on mode) and off (standby mode) according to power control as follows (Maximum total capacity is 120 W (1A)). • Plug this cord into a wall AC outlet. Standby mode - Switched AC outlet off Power - on mode - Switched AC outet on 14. SWITCHED AC OUTLETS 15. AC INPUT CORD R-772(A) 2007.8.16 5:21 PM [...]

ENGLISH 15 Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button/indicator 3. VIDEO INPUT SELECTOR button 4. AUDIO INPUT SELECTOR button 5. EXTERNAL IN button 6. TUNER button 7. MASTER VOLUME CONTROL knob 8. HEADPHONE jack 9. SPEAKER button/indicator 10. SURROUND MODE button 11. STEREO button 12. SETUP button 13. CHANNEL LEVEL button 14. [...]

ENGLISH 16 • The AUX IN jack can be connected to an additional audio component such as an MP3 player, etc.   Note : • When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.  VIDEO 4 IN JACKS • The VIDEO 4 IN jacks may be also connected to an additional video component such as a ca[...]

ENGLISH 17 Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver , you should enter the setup code for eac[...]

ENGLISH 18  FUNCTION TABLE of the NUMBERED BUTTONS.  Notes : • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too. • For details about functions, refer to the o[...]

ENGLISH 19 LO ADING B A TTERIES OPERA TING COMPONENTS WITH REMO TE CONTROL REMO TE CONTROL OPERA TION RANGE  In case that this remote control emits the infrared beams • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.  In case that this remote control emits the RF [...]

20 USING FUNCTIONS OF REMO TE CONTROL ENGLISH Entering a setup code • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote control operation, "000" w[...]

21 ENGLISH • If any of buttons fails to operate as they should, start from the step 1 again to enter the correct setup code.  Note : • Manufacturers may use different setup codes for the same product category. For that reason, it is important that you check to see if the code you have entered operates as many controls as possible. If only a [...]

ENGLISH 22 • If the command has been learned successfully, "OK" is displayed and then "SEL" is flickering. • If "ERROR" is displayed and then "SEL" is flickering, it means that for some reason the command was not learned. In this case, repeat the above steps 4 and 5.  Notes : • If an incorrect signal[...]

23 ENGLISH Erasing the programmed command from one button • "OK" is displayed and then "SEL" is flickering. • Then "BTTN" is displayed on the LCD screen for several seconds. Example: When the button for the command to be erased is PLAY button. • Each time the CURSOR UP(  )/DOWN(  ) buttons are pressed, &quo[...]

ENGLISH 24 Programming a macro function Example: When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver.  . Press "AUDIO" button to control this receiver.  . Press "POWER ON" button to turn this receiver on.  . Press "VIDEO 2(7)" button to select the desired input source.  . Press [...]

ENGLISH 25 Operating a macro function  Notes: • The codes programmed into a MACRO button will be transmitted at an interval of 0.5 seconds. However, some components may not be able to complete one operation in 0.5 seconds and may miss the next code. In this case, the macro function cannot control the corresponding components correctly. • Be [...]

ENGLISH 26 • Each time the CURSOR UP(  )/DOWN(  ) buttons are pressed, depending on the selected punch-through mode, punch-through devices and the one punch-through deleting mode ("DELETE") are selected as follows : • In case of the volume punch-through,  AUDIO  DELETE  TV  • In case of the transport punch-through,[...]

ENGLISH 27 3. While the device is displayed, press the CURSOR UP(  )/DOWN(  ) buttons to select the one punch-through deleting mode ("DELETE"), then press the ENTER button. 2. While "VOL" is displayed, press the CURSOR UP(  )/DOWN(  ) buttons to select the all punch-through deleting mode ("DELETE"). 3. Whil[...]

28 Changing the transmission signal • This remote control can emit not only the infrared beams which the conventional remote control uses but also the RF(Radio Frequency) beams which are stronger than those. • When you want to control this receiver from longer distance even if there are obstacles such as walls, furniture, etc. in the way, chang[...]

29 REMOTE CONTROL OPERA TION RANGE ROOM 2 Remote Controls This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. • For details on ROOM 2 operation, refer to &[...]

ENGLISH 30 LISTENING TO A PROGRAM SOURCE Operations Before operation • Enter the standby mode. • The POWER ON/STANDBY button lights up amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To switch the power off, push the POWER switch again. T[...]

ENGLISH 31 • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 34. • If the AUDIO MODE is set to the mode other than "DIGITAL" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTI[...]

ENGLISH 32  DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which can handle higher data rates. Discs bearing the “ ” include the recording of up to 5.1 channels of digital signals, which can be generally thought to provide better sound quality due to the lower audio compression requ[...]

ENGLISH 33  Dolby Pro Logic IIx surround Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 channel sources and extends to 7.1channel surround playback. It delivers the most natural, full range and immersing 7.1 channel listening experience. Dolby Pro Logic IIx surround includes three modes as follows : • Dolby Pro Logic IIx Movie Whe[...]

ENGLISH 34 ENJOYING SURROUND SOUND • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be automatically selected depending on the signal format being input. Manual surround mode : You can select the desired of different surround modes selectable for the signal being input with usin[...]

ENGLISH 35 Continued   To cancel the surround mode for stereo operation • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND[...]

ENGLISH 36 Adjusting the current channel level • Each time these buttons are pressed, the corresponding channel is selected as follows: ( ): Possible depending on whether the surround back channel is set to "2 CH" or "1 CH". < >: Possible only when the digital signals from Dolby Digital or DTS program sources that includ[...]

ENGLISH 37 Memorizing the adjusted channel levels • The "1" of "REF 1" indication flickers for several seconds. • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. • The adjusted channel levels have now been memorized into the s[...]

ENGLISH 38 LISTENING TO RADIO BROADCASTS Auto tuning • Each time this button is pressed, the band changes as follows : → FM STereo → FM MONO → AM → XM ("ST" lights up) ("ST" goes off) • When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcast[...]

ENGLISH 39 • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If "MEM" goes off, start again from the above step 2.  MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized. • INPUT SELECTOR setting[...]

ENGLISH 40 1. Press the TUNER button repeatedly to select XM mode. 2. Press the TUNING UP(+)/DOWN(-) buttons repeatedly to select "XM 000". 3. To sign up, access the website at "http://activate.xmradio.com" or call "1-800-967- 2346". • Then "XM ~" is displayed. • Then your XM Satellite Radio ID is display[...]

ENGLISH 41 Examples: For " 3 " : For " 27 " : For " 124 " : • When "XM CH  " disappears, repeat again from the above step 1. 1. In the XM mode, select the direct search mode. 2. While displaying "XM CH  ", select the desired channel number with pressing the NUMERIC (0 ~ 9) button[...]

42 ENGLISH 1. Select the desired channel with preforming channel search, direct search or category search. 2. To memorize the channels, perform the steps 2 to 4 in "Manual presetting" procedure on page 39. • You can store up to 30 preferred channels in the memory. Presetting channels • In the XM mode, select the desired preset channel[...]

43 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90[...]

44 • ROOM 2 ~ is displayed for several seconds. • Each time this button is pressed, the ROOM 2 mode changes as follows : OFF : To turn off the ROOM 2 function. ("R2" goes off .)  ON : To turn it on. ("R2" lights up.)  Note : • When the ROOM 2 mode is set to OFF, you cannot adjust the ROOM 2 volume. ROOM 2 SOURCE PLA [...]

45 RECORDING Recording with TAPE • To record the analog signals onto the recording equipment, be sure to connect the ROOM2 OUT jacks to the recording equipment. (For details, refer to "CONNECTING AUDIO COMPONENTS" on page 8.) • The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital [...]

ENGLISH 46 1. Select the desired of CD, AUX, VIDEO 1~4 as a recording source. 2. For digital recording, select the digital input as recording signal input. 3. Start recording on the component connected to the OPTICAL DIGITAL OUT. 4. Start play on the desired input. DIGIT AL AUDIO RECORDING WITH MD RECORDER • Only when the OPTICAL DIGITAL OUT of t[...]

ENGLISH 47 OSD Menu Settings • The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The OSD menu consists[...]

ENGLISH 48 • For the setting details, see page in  • Adjust the setting(s) in each setting category to your preference. • When the SETUP button is pressed on a sub-menu, the menu screen will be turned off.   When selecting the SYSTEM SETUP   When selecting the INPUT SETUP   When selecting the SOUND PARAMETER   Wh[...]

ENGLISH 49 • AMP ASSIGN : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • SUBWOOFER MODE : To select the desired subwoofer mode. • HDMI AUDIO OUT : To output the digital audio signals from the HDMI MONITOR OUT connector. • TONE CONTROL : To adjust the tone (bass and treble) as des[...]

ENGLISH 50 When selecting the SUBWOOFER MODE • "SW PLUS  " mode is valid only when "FRONT" and "CENTER" are set to "FULL RANGE" and "SUBWOOFER" is set to "YES" on the SPEAKER/ROOM EQ SETUP menu. (For details, refer to "SETTING THE SPEAKER/ ROOM EQ SETUP" on page 57.) NORMAL [...]

ENGLISH 51  . Press the CURSOR LEFT(  )/RIGHT(  ) buttons to adjust the selected tone as desired. • The tone level can be adjusted within the range of -10 ~ +10 dB. • In general, we recommend the bass and treble to be adjusted to 0 dB (flat level). • Extreme settings at high volume may damage your speakers. • To complete tone adjus[...]

ENGLISH 52 When selecting the OSD POSITION ADJUST • You can adjust the position of the momentary OSD and the OSD menu that are displayed on the monitor TV. 1. Press the CURSOR UP(  )/DOWN(  ) buttons to select the OSD POSITION ADJUST, then press the ENTER button. 2. Press the CURSOR UP(  )/DOWN(  )/LEFT(  )/RIGHT(  ) buttons to [...]

53 ENGLISH • This menu allows you to make the various settings depending on how to use the input sources connected to this receiver. SETTING THE INPUT SETUP When selecting the items other than NAME Example: When selecting the VIDEO 1  Note : • Depending on the input source, some items other than DC TRIGGER cannot be selected. 1. Press the CU[...]

ENGLISH 54 When selecting the HDMI ASSIGN When selecting the VIDEO ASSIGN When selecting the AUDIO ASSIGN • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 4. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 7.) • You can select HDMI 1 or HDMI 2.  Note : • In such a case that a HDMI IN [...]

ENGLISH 55 • Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode. ON : The optimum surround mode will be automatically selected depending on the signal (Auto surround mode) format being input.  OFF : You can select the disired of different surround modes selectable for the signal being [...]

ENGLISH 56 When selecting the NAME • You can give names to the input sources other than tuner. • Up to 7 characters can be entered for each name. Example: When selecting the VIDEO 1 • The name is stored in the memory.  To resume its factory input source name. • Make a blank on each digit and press the ENTER button. • The first digit fl[...]

ENGLISH 57 SETTING THE SPEAKER / ROOM EQ SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you sh[...]

ENGLISH 58 • Loud test tones are output successively and then if a series of auto setup procedure has been completed, "COMPLETED" will be displayed. • To stop the auto setup procedure while performing it, press the ENTER button. In such a case that the auto setup procedure is stopped before "COMPLETED" is displayed, the resu[...]

ENGLISH 59 When selecting the SPEAKER CONFIGURATION 1. Press the CURSOR UP(  )/DOWN(  ) buttons to select the SPEAKER CONFIGURATION, then press the ENTER button. 2. Press the CURSOR UP(  )/DOWN(  ) buttons to select the desired speaker. YES/NO: Select the desired depending on whether the speakers are connected or not. 2CH/1CH: Select th[...]

ENGLISH 60  When selecting the desired unit • You can select either METERS or FEET. • Once a unit is selected, the distances are automatically changed in the selected unit.  When setting the distance • You can set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals (or 0.5 ~ 30 feet in 0.5 feet intervals). When sele[...]

ENGLISH 61 • You can adjust the crossover frequency within the range of 40 ~ 250 Hz. • Select "FULL RANGE" when the selected speaker can fully reproduce the low frequencies below 40 Hz. When selecting the SPEAKER CROSSOVER  Note : • You cannot select the subwoofer and the speakers set to "NO". • Set the crossover freq[...]

ENGLISH 62 When selecting the ROOM EQ SETUP • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers. • If you use different brands or sizes of speakers for some channels or have a room[...]

63 ENGLISH   When selecting the USER mode • You can adjust the parametric EQ settings to optimize the frequency characteristics of this unit's parametric equalizer to match the acoustic characteristics of your room. • The parametric equalizer uses a combination of the following three parameters to provide highly precise adjustment of[...]

ENGLISH 64 SETTING THE CH LEVEL SETUP  Note : • Depending on the speaker settings("NO", etc.), some channels cannot be selected. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CALIBRATE"), not into preset memory("REFERENCE 1", "REFERENC[...]

ENGLISH 65 Memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2") and recall the memorized whenever you want. • The "REFERENCE 1" indication flickers. • Each time the CURSOR LEFT(  ) or RIGHT(  ) button is pressed, "REFEREN[...]

ENGLISH 66 SETTING THE SOUND P ARAMETER When selecting the NIGHT MODE • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track when wa[...]

ENGLISH 67 When selecting the DOLBY PLII MUSIC • You can adjust the various surround parameters for optimum surround effect.  Note: • The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx Music mode.  When selecting the PANORAMA mode This mode extends the front stereo image[...]

ENGLISH 68 When selecting the DOLBY HEADPHONE • You can select the desired listening mode for Dolby Headphone mode.  Note: • The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source. MOVIE : This provides the surround effect suitable for movie sources. MUSIC 1 : This provides the su[...]

ENGLISH 69  When selecting the Dolby Virtual Speaker Reference mode 2 SPK : When using 2 front speakers only. 3 SPK : When using 2 front and center speakers.  When selecting the Dolby Virtual Speaker Wide mode 2 SPK : When using 2 front speakers only. 3 SPK : When using 2 front and center speakers. 4 SPK : When using 2 front and 2 surround sp[...]

ENGLISH 70 OFF : To turn off the ROOM 2 function.  ON : To turn it on.  Notes: • When the ROOM 2 is set to OFF, the INPUT and the VOLUME cannot be selected. • When you do not use the ROOM 2 function, set the ROOM 2 to OFF to save electricity. When selecting the ROOM 2 • The ROOM 2 function allows enjoying one source in the main room whi[...]

ENGLISH 71 T roubleshooting Guide If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This c[...]

ENGLISH 72 Specifications  AMPLIFIER SECTION • Power output, stereo mode, 6 Ω , THD 1.0 %, 40 Hz~20 kHz | 2   100 W • Total harmonic distortion, at -3 dB, 6 Ω , 1 kHz | 0.05% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω , 95 W | 0.05% • Input sensitivity/impedance Line (CD, TAPE, VIDEO) | 300 mV/47k Ω • Signal[...]

ENGLISH 73 Setup Code T able AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003 Bell & Howell 019 001 Bradford 027 Brockwood 003 Broksonic 028 031 CXC 027 Candle 005 011 Carnivale 005 Carver 010 Celebrity 050 Cineral 030 014 C[...]

ENGLISH 74 Admiral 027 021 Adventura 000 Aiko 025 Aiwa 005 000 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 021 001 CCE 015 025 Calix 005 Canon 004 Carver 081 Cineral 025 Citizen 005 025 Colt 015 Craig 005 012 023 015 024 Curtis Mathes 013 004 026 028 Cybernex[...]

ENGLISH 75 Headquarter 011 Hitachi 000 008 026 Hughes Net.Sys 008 JVC 014 026 Jensen 026 KEC 005 025 KLH 015 Kenwood 014 026 006 Kodak 004 005 LXI 005 Lloyd’s 000 Logik 015 MEI 004 MGA 023 009 MGN Technology 023 MTC 023 000 Magnasonic 025 Magnavox 004 007 016 000 019 Magnin 023 Marantz 004 016 Marta 005 Matsushita 004 028 029 Memorex 004 005 027 [...]

ENGLISH 76 Magnin 023 Memorex 005 028 (TV use 025) Mitsubishi 027 (TV use 041) Orion 001 Panasonic 004 (TV use 008) 028 (TV use 042) Penney 004 (TV use 008) 023 028 (TV use 042) Quasar 004 (TV use 008) 028 (TV use 042) RCA 013 (TV use 012) 004 (TV use 008) 027 (TV use 041) Sansui 000 Sanyo 023 Sear 000 005 Sharp 027 (TV use 041) Sony 002 (TV use 00[...]

ENGLISH 77 Stargate 010 014 026 Starquest 010 TV86 015 Teleview 014 Tocom 007 008 Tusa 010 Unika 018 United Artists 007 Universal 153 019 Viewstar 015 Zenith 024 Zentek 022 AlphaStar 008 Chaparral 001 Echostar 009 Expreevu 009 General Instrument 016 015 018 HTS 009 Hitachi 011 Hughes Net.Sys 007 JVC 009 Jerrold 016 015 Megavox 006 005 Memorex 006 N[...]

78 GE 043 Lutron 044 One For All 042 Radio Shack 043 Security System 042 Universal X10 042 X10 042 Aiwa 045 059 029 Fisher 005 Harman/Kardon 046 JBL 046 JVC 047 Jerrold 031 RCA 006 Scientific Artlanta 032 Sony 045 Starcom 031 AUX-DBS Archer 013 GC Electronics 013 Jebsee 013 Rabbit 036 Radio Shack 013 AUX-ACCESSAR Y AUX-HOME AUT OMA TION Aiwa 010 03[...]

R-772(A) 2007.8.16 5:21 PM 페이지 1[...]