Siemens 410 manuale d’uso

MICROMASTER 410 Operatin g I nstructions Issue A1 User Documentation Order number: 6SE6 400-5EA0 0-0BP0[...]

MICROMA STER 410 Documentat ion Getting Star te d Guide Is for quick commiss ioning. Operating Instru ctions Gives inf orm ation about f eatures of the MM410, Installat ion, Comm iss ioning, Contr ol m odes, System Param eter str ucture, T roublesh ooting , Specif ications and availab le opt ions of the MM410. Paramet er List The Param eter Lis t c[...]

MICROMASTER 410 Operating Instructions User Docum entation Valid for Issue 10/0 1 Converter Ty pe MICROMAST ER 410 Issue A 1 Overv iew 1 Installation 2 Commissioning 3 Using the MICROMA STER 410 4 Syst em Parameters 5 Troubleshooting 6 MICROMA STER 410 Spec ifications 7 Available options 8 Electro-Ma gnetic Compatibility 9 A ppendices A B C Index[...]

MICROMASTER 410 Operating Instructions 4 6SE6400-5EA 00-0BP0 Further information can be obtained from Internet website: ht tp :/ /ww w.s i em ens . de/m ic r omas t er Approved Siemens Qualit y for S oft ware and Training is to DIN ISO 9001, Reg. No. 2160-01 The reproduction, t ransm ission or use of this doc ument, or its contents is not permitted[...]

Issue A1 Foreword MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 5 Forew ord User Documentation WARNING Before i nstalli ng and com mis sioning the inver ter, you must read a ll saf ety instruc tions an d warn ings c arefull y inclu ding al l the warn ing l abels att ached to t he equipm ent. Mak e sure that th e war ning labe ls are k [...]

Definitions and W arnings Issue A1 MICROMASTER 410 Operating Instructions 6 6SE6400-5EA 00-0BP0 Definitions and Warnings DA NGE R indicates an imm ientl y hazardo us situa tion wh ich, if not avoid ed, will r esult in deat h or serious injur y. WARNING indicates a potent iall y hazardo us situa tion which, if not avo ided, co uld resul t in death o[...]

Issue A1 Safety Ins tructions MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 7 Safety Instructions The f ollowing W arnings , Cautio ns and Not es are provided f or your safet y and as a means of preventi ng dam age to the product or com ponents in th e m achines connecte d. This s ection l ists W arnings, Ca utions an d Notes, which ap[...]

Safety Ins tructions Issue A1 MICROMASTER 410 Operating Instructions 8 6SE6400-5EA 00-0BP0 Transport & Storage WARNING ♦ Correct tr ansport, s torage, er ection an d m ounting, as well as car eful operatio n and m aintenanc e are es sentia l for pr oper and safe oper ation of the equipm ent. CA UTI ON ♦ Protect t he inver ter aga inst ph ys[...]

Issue A1 Safety Ins tructions MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 9 Opera tion WARNING ♦ MICROMAST ERS op erate at high voltag es. ♦ W hen operating electric al devic es, it is im possible to avoid appl ying hazardo us volta ges to c ertain p arts of the equipm ent. ♦ Emer gency Stop f acilities accordi ng to EN 6 0204 [...]

Safety Ins tructions Issue A1 MICROMASTER 410 Operating Instructions 10 6SE6400-5EA 00-0BP0[...]

Issue A1 Table of C ontents MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 11 Table of Contents 1 Overv iew ................................................................................................................ 15 1.1 The MICROM ASTER 4 10 ....................................................................................... [...]

Table of C ontents Iss ue A1 MICROMASTER 410 Operating Instructions 12 6SE6400-5EA 00-0BP0 8 Options ................................................................................................................... 67 8.1 Variant Inde pendent O ptions .................................................................................. 67 8.2 Varian[...]

Issue A1 Table of C ontents MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 13 List of Ill ustrati ons Figure 2-1 Forming.............................................................................................................. ...................18 Figure 2-2 Power Losse s, 230 V .....................................................[...]

Table of C ontents Iss ue A1 MICROMASTER 410 Operating Instructions 14 6SE6400-5EA 00-0BP0[...]

Issue A1 1 Overv iew MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 15 1 Over view 1.1 The MICROM A STER 410 The MICROM ASTER 4 10s are a range of f requency inv erters f or control ling the speed of three phas e AC m otors. T he various models availa ble rang e from 120 W to 750 W single-phas e input. The inv erters are m icr oprocess [...]

1 Overv iew Issue A1 MICROMASTER 410 Operating Instructions 16 6SE6400-5EA 00-0BP0 Performance Characteristics Ø F lux Current Control (F CC) for im prove d d ynamic res ponse and m otor c ontrol Ø F ast Current Lim itation (FCL) f or trip-f ree oper ation Ø Built -in D C in jectio n bra ke Ø Com pound br aking to im prove brak ing per form anc[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 17 2 Inst allation WARNING ♦ ♦ ♦ ♦ W ork on the devic e/s ystem b y unqualif ied pers onnel or failur e to com ply wit h warnings c an resu lt in se vere per sonal injur y or serious dam age to m aterial. Only suit abl y qualifie d pers onnel tra ined in the[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 18 6SE6400-5EA 00-0BP0 2.1 General Insta lla tion afte r a P erio d o f S torag e Follo wing a pro longed per iod of storage, you m ust ref orm the c apacitors in the inverter . It is impo rtant t hat the time o f storag e is calcu lated from the time of manufacture and not the time of[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 19 2.2 Power Losses Figure 2- 2 sho ws the power l oss f or the MICROMAST ER 410 Inverter . The graph c an be us ed to rea d the loss at f ull load of a part icular v ariant. 2.3 A mbient oper ating condi ti ons Temperature Frame Size AA AB Min. [ ° ° ° ° C] -10[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 20 6SE6400-5EA 00-0BP0 Shock Do not drop the inv erter or exp ose to sudden shoc k. Do no t instal l the in verter in an area where it is lik el y to be exposed to cons t ant vi brat ion. Mechanic al strengt h to EN 60721-3- 3 Ø Deflectio n: 0.075 mm (10 ... 58 H z) Ø Accel erati on:[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 21 2.4 Harmonic Current s Harm onic curr ents with 1% m ains im pedance. Table 2-1 Single Pha se 115 V Co nnection MLFB Filter Type Power CT (kW) Fundamen- tal Amps 3 rd Amp s 5 th Amp s 7 th Amp s 9 th Amp s 11 th Amp s 13 th Amp s 6SE6410-2UA11-2A A0 UNFILTERED 0,[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 22 6SE6400-5EA 00-0BP0 2.6 Overv olt age and T rip Levels The inv erter wil l protec t itself f rom both suppl y overvolta ge and undervolt age. T rip levels are sho w in T able 2-4. I ntern al overvo ltage c an occ ur during brak ing where internal voltages are f orced high by energ y[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 23 30 mm 100 mm 100 mm 30 mm Figure 2-5 Clearance distances for mou nting the inverter For side m ounting and UL com plia nce the am bient tem peratur e shoul d be no greater t han 40 ºC. T he m aximum output curre nt of the 7 50 W inverter is 3.2 A. Table 2-5 Dime[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 24 6SE6400-5EA 00-0BP0 2.7.1 Mounting Brackets The MICROM ASTER 4 10 ca n be m ounted using m ount ing brac kets, wh ich are slotted i nto the heats ink at the rear of the in verter f or norm al m ounting pos ition (see Figure 2- 6 A. For s ide m ounting of the in verter the br ack ets[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 25 A B C D E 2.7.2 DIN Rail Mounting The DIN Rai l Mounti ng Kit c onsists of the fol lowing i tems : Ø 1 x plastic moulded base Ø 1 x plastic moulded reta ining c lip Ø 1 x Metal sprin g The DIN Rai l Mounti ng Kit is suppl ied as an option f or the in verter. I[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 26 6SE6400-5EA 00-0BP0 2.8 Electrical Inst allation WARNING THIS EQUIPM ENT MUST BE GROUNDED. ♦ To ens ure the safe o peration of the equipm ent, it m ust be ins talled and comm issioned b y qua lified person nel in f ull com plianc e with the warn ings laid down in these oper ati ng[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 27 Operation with Residual Current Device If an RCD (also ref erred to as E LCB or RCC B) is fitted, t he MICROMAST ER inverter s will operate without nuisance trip ping, pro vided th at: þ A t ype B RCD is used. þ The trip lim it of the RCD is 30 m A. þ The neut[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 28 6SE6400-5EA 00-0BP0 Removal of ‘Y’ Capacitor Link To use the i nverter o n unground ed suppl ies the ‘ Y’ capacitor ( cap) link m ust be rem oved as f ollows: 1. Ensure the inver ter has been disc onnecte d from all power suppl ies. 2. Locate the ‘Y’ Cap cover on the lef[...]

Issue A1 2 Installati on MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 29 Figure 2-9 Motor and Pow er Connections 2.8.3 A voiding Electro-Magnetic Interfer ence (EMI) The inv erters are d esigned to operat e in a n industr ial en vironm ent where a high level of EMI c an be exp ected. Us uall y, good inst allat ion practic es wil l ens[...]

2 Installati on Issue A1 MICROMASTER 410 Operating Instructions 30 6SE6400-5EA 00-0BP0 The inv erter can be screene d using the m ethodolog y shown in Figure 2- 10. Legend 1 Motor cable 2 Use suitable clips to fix motor and control cable screens securely to metal bac k plate 3 Mains pow er cable 4 Metal mounting brackets 5 Line commutati ng Ch oke [...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 31 3 Commissioni ng WARNING ♦ ♦ ♦ ♦ MICROMAST ERS op erate at high voltag es. ♦ ♦ ♦ ♦ W hen operating electric al devic es, it is im possible to avoid appl ying hazardo us volta ges to c ertain p arts of the equipm ent. ♦ ♦ ♦ ♦ Emer gency St[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 32 6SE6400-5EA 00-0BP0 3.1 Block Diagram Figure 3-1 Inverter bloc k diagram[...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 33 3.2 Commission Modes The MICRO MAST ER 410 is suppli ed with def ault p aram eter settings c over t he follo wing: Ø T he motor rating dat a; vo ltage, curr ent an d freque ncy data is ke yed into th e inverter to ensur e that th e m otor is com patible with th[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 34 6SE6400-5EA 00-0BP0 3.2.1 Commissioning without an Operator Panel The inv erter is s upplie d with an L ED to i ndicate t he opera tion stat e of the unit. The inv erter can be used with its d efault s ettings , for a num ber of applic ations . The default se ttings are s ho wn in [...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 35 3.2.3 Changing the Line Supply Frequenc y The s upply frequenc y of the inverter can be ch anged us ing either the Operator Pan el or b y physica ll y cutting th e Suppl y Frequenc y Link as shown in Figure 3- 4: Cutting the supply link The line suppl y frequenc[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 36 6SE6400-5EA 00-0BP0 3.2.4.1 Commissioning with the Operator Panel The O perator Pane l (OP) provid es acc ess to the inverter param eters and e nables the user t o custom ize the settings of your MICRO MAST ER 41 0. The OP c an be used to c onfigure several MICROMA STER 41 0 Invert[...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 37 Buttons on the Operator Panel Panel/Button Function Effects Indicates Status T he LCD displa ys the sett ings curr entl y used b y the convert er. Start motor Pressing the button st arts the c onver ter. This button is disabled by defau lt. To en able t his butt[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 38 6SE6400-5EA 00-0BP0 Changing parameters with the Operator Panel The proc edure for changi ng the va lue of param eter P0004 is desc ribed b elow. Modif ying the value of an indexe d param eter is illustr ated us ing the ex ample of P2011. F ollow exac tly the s ame proc edure to a [...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 39 NOTE In som e cases - when chang ing param eter values - t he dis pla y on the Operat or Pane l shows . This means the i nverter is bus y with task s of higher pr iorit y. Changing single digits in Parameter values For chang ing the par ameter value r apidly, th[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 40 6SE6400-5EA 00-0BP0 Flo w char t Quick Comm issionin g (L ev el 1 Only ) 1) Motor related paramet ers – please refer to motor rating plate. 2) Denotes parameters that c ontain m ore detail e d lists of possible setti ngs f or use in specific applicat i ons. Pleas e refer t o the [...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 41 Motor d ata for pa rameter i zation Figure 3-7 T ypical M otor Rating Plate Ex ample NOTE Ø P03 08 & P 0309 are onl y visible if P0003 = 3. On ly one of the param eters is shown depe nding on the set tings of P0100 . Ø P03 07 ind icates kW or hp depending [...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 42 6SE6400-5EA 00-0BP0 3.3 General operation For a f ull desc ription of Level 1 to Le vel 3 par ameter s, pleas e refer to the Parameter List. NOTICE 1. The inv erter does not have a m ain po wer switch an d is li ve when th e m ains suppl y is connect ed. It waits, with t he out put[...]

Issue A1 3 Commis sioning MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 43 External motor thermal ov erl oad protection When oper ated bel ow rated s peed, the cooling effec t of fans f itted to the m otor shaft is reduced. Consequ entiall y, mos t motor s require de- rating for c ontinuous operatio n at lo w frequenci es. T o ensure t[...]

3 Commis sioning Issue A1 MICROMASTER 410 Operating Instructions 44 6SE6400-5EA 00-0BP0[...]

Issue A1 4 Using th e MICRO MASTE R 41 0 MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 45 4 Using the MICROM A ST ER 410 WARNING ♦ ♦ ♦ ♦ W hen operating electric al devic es, it is im possible to avoid appl ying hazardo us volta ges to c ertain p arts of the equipm ent. ♦ ♦ ♦ ♦ Emer gency Stop f acilities accordi ng to [...]

4 Using th e MICRO MASTER 4 10 Iss ue A1 MICROMASTER 410 Operating Instructions 46 6SE6400-5EA 00-0BP0 4.2 Command Sources (P0700) NOTICE The ram p tim es and ram p-sm oothing func tions also aff ect how the m otor star ts and stops. For details of these f unctions, please r efer to param eters P112 0, P1121, P1130 – P 1134 in th e Param eter Lis[...]

Issue A1 4 Using th e MICRO MASTE R 41 0 MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 47 4.3.2 OFF2 This comm and causes the m otor to c oast to a s tandsti ll (pu lses disa bled). NOTICE The OF F2 comm and can ha ve one or mor e sources . By defaul t the OFF 2 comm and is set to O perat or Pane l. This source s till ex ists e ven if [...]

4 Using th e MICRO MASTER 4 10 Iss ue A1 MICROMASTER 410 Operating Instructions 48 6SE6400-5EA 00-0BP0 4.4 Control Modes (P1300) The vario us m odes of oper ation of the MICROM ASTER 4 10 contr ol the rel ation- ship bet ween the s peed of the m otor and the voltage s upp lied b y the inver ter. A summ ary of the co ntrol m odes ava ilable ar e lis[...]

Issue A1 5 Syste m Parame ters MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 49 5 System Parameter s 5.1 Introduction to MICROM ASTER Sy stem Par ameter s The parameters can only be changed by using the Opera tor Panel (OP) or the Serial Inte rface. Param eters can be c hanged and set us ing the O P to adj ust the d esired pr operties [...]

5 Syste m Parameters Issue A1 MICROMASTER 410 Operating Instructions 50 6SE6400-5EA 00-0BP0 5.2 Parameter Overv iew P0004 = 2 Inve rter Un it P0004 = 3 Mo tor Da ta P0004 = 7 Commands and Digtal I /O P0004 = 8 Analogue I/O P0004 = 1 0 Setpoint Channel & Ramp Generator P0004 = 12 Drive Features P0004 = 13 Motor Control P0004 = 20 Co mmuni cation[...]

Issue A1 5 Syste m Parame ters MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 51 5.3 Parameter List (short form) Explanat ory inf orm ation on f ollowin g table: Ø Default: Factor y settin g Ø Level: Access l evel ( Acc) Ø DS Inverter s tatus (Dr ive St ate), ind icates t he inver ter st ate in whic h a param eter can be m odified (s[...]

5 Syste m Parameters Issue A1 MICROMASTER 410 Operating Instructions 52 6SE6400-5EA 00-0BP0 Motor Data (P0004 = 3) ParNr Par Text Default Acc DS QC r0034 CO: Motor temperature (i 2 t) - 3 - - P0300 Select motor type 1 3 C Q P0304 Rated m otor voltage 230 1 C Q P0305 Rated m otor current 3.25 1 C Q P0307 Rated m otor power 0.75 1 C Q P0308 Rated m o[...]

Issue A1 5 Syste m Parame ters MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 53 A nalogue I/O (P0004 = 8) ParNr Par Text Default Acc DS QC r0752 Act. i nput of ADC [ V] - 3 - - P0753 Smooth time ADC 3 3 CUT N r0754 Act. ADC value aft er scal i ng [%] - 2 - - P0757 Value x1 of ADC scali ng [V] 0 3 CUT N P0758 Value y1 of ADC scali n g 0[...]

5 Syste m Parameters Issue A1 MICROMASTER 410 Operating Instructions 54 6SE6400-5EA 00-0BP0 Drive Features (P0004 = 12) ParNr Par Text Default Acc DS QC P0005 Displ ay select ion 21 2 CUT N P1200 Flying start 0 3 CUT N P1202 Motor-current: Flying start 100 3 CUT N P1203 Search rate: Flying st art 100 3 CUT N P1210 Autom atic rest art 1 2 CUT N P121[...]

Issue A1 5 Syste m Parame ters MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 55 Communication (P0004 = 20) ParNr Par Text Default Acc DS QC P0927 Paramet er changeable vi a 15 3 CUT N r0964[5] Firmware version data - 3 - - P0971 Transfer data from RAM to EEPROM 0 3 CUT N P2000 Reference f requenc y 50.00 3 CT N P2009[2] USS normalizati[...]

5 Syste m Parameters Issue A1 MICROMASTER 410 Operating Instructions 56 6SE6400-5EA 00-0BP0[...]

Issue A1 6 Troub leshoot ing MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 57 6 T rouble shooting WARNING ♦ ♦ ♦ ♦ Repairs on equipm ent m ay onl y be carried o ut b y Siemens Servic e , b y repair centers au thorized by Siem ens or b y qualif ied pers onnel who are t horough ly acquainte d with al l the warn in gs and operat in[...]

6 Troub leshoot ing Issue A1 MICROMASTER 410 Operating Instructions 58 6SE6400-5EA 00-0BP0 6.3 Fault messages Fault Possibl e Causes Diagnose & R emedy Reac- tion F0001 OverCurrent Ø Motor power (P0307) does not correspond t o the inverter power (r0206) Ø Motor lead short circ uit Ø Earth faults Check t he following: 1. Motor power (P0307) m[...]

Issue A1 6 Troub leshoot ing MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 59 Fault Possibl e Causes Diagnose & R emedy Reac- tion F0060 A s ic Timeout Internal c ommunications failure If fault persist s, change inverter Contact Servi c e Department OFF2 F0071 USS (BOP- link) setpoint fault No setpoint val ues f rom USS during tele[...]

6 Troub leshoot ing Issue A1 MICROMASTER 410 Operating Instructions 60 6SE6400-5EA 00-0BP0 6.4 A l arms Alarm Possible C auses Diagnose & Remedy Reac- tion A 0501 Current Limit Ø Motor power does not correspond t o the inverter power Ø Motor leads are too long Ø Earth faults Check t he following: 1. Motor power (P 0307) must correspond to in[...]

Issue A1 6 Troub leshoot ing MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 61 Alarm Possible C auses Diagnose & Remedy Reac- tion A 0920 AD C parameters not set properly. ADC parameters should not be set to identic al values, si nce t his would produce illogical results. Check P0757, P0758, P0759 and P0760 -- A 0922 No loa d applie[...]

6 Troub leshoot ing Issue A1 MICROMASTER 410 Operating Instructions 62 6SE6400-5EA 00-0BP0[...]

Issue A1 7 MICRO MAST ER 410 Spe ci ficatio ns MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 63 7 MICROM ASTER 410 S p ecifications Table 7-1 MICROMAST E R 410 Performan ce Ratings Feature Specification Mains Operating Volt age & Power Ranges 100 to 120 V ± 10% 1AC 0.12 kW – 0.55 k W 200 to 240 V ± 10% 1AC 0.12 kW – 0.75 kW I[...]

7 MICRO MAST ER 410 Spec ificat ions Issue A1 MICROMASTER 410 Operating Instructions 64 6SE6400-5EA 00-0BP0 Table 7-2 Terminal Torques – Field W irin g Connectors Motorside PE terminal Al l other t erminal s [Nm] 0.8 1 .1 Tightening Torque [lbf.in] 7. 1 9.8 Table 7-3 MICROMASTER 410 Spe c ificat ions Input voltage range 1 AC 200 V – 240 V, ± 1[...]

Issue A1 7 MICRO MAST ER 410 Spe ci ficatio ns MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 65 Input voltage range 1 AC 200 V – 240 V, ± 10 % (Unfiltered) Order No. 6SE6410- 2UB11 -2AA0 2UB12 -5AA0 2UB13 -7AA0 2UB15 -5BA0 2UB17 -5BA0 [kW] 0.12 0. 25 0.37 0. 55 0.75 Motor Output Rating [hp] 0.16 0. 33 0.5 0.75 1.0 Output Current M a[...]

7 MICRO MAST ER 410 Spec ificat ions Issue A1 MICROMASTER 410 Operating Instructions 66 6SE6400-5EA 00-0BP0[...]

Issue A1 8 Options MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 67 8 Options The f ollowing access ories are a vailab le as opt ions for your MICRO MAST ER MM410 I nverter. For mor e details p lease r efer to t he catalo gue or c ontact your loca l Siemens sale s office if you require assi stance. 8.1 V ari ant I ndependent Options Ø[...]

8 Options Issue A1 MICROMASTER 410 Operating Instructions 68 6SE6400-5EA 00-0BP0[...]

Issue A1 9 Electro- Magnetic Comp atib ility MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 69 9 Electro-Magnetic Comp atibility (EMC) 9.1 Electro- M agnetic Comp atibilit y (EM C) All m anufactur ers / ass emblers of electr ical a pparatus which “per form s a com plete intrinsic functio n and is placed o n the m arket as a single uni[...]

9 Electro- Magnetic Comp atibility Issue A1 MICROMASTER 410 Operating Instructions 70 6SE6400-5EA 00-0BP0 9.1.3 EM C Directiv e Compliance with Harmonics R egulations From 1s t Januar y 2001 all e lectric al apparat us cov ered b y the EMC Directiv e will have to c ompl y with EN 6100 0-3-2 "Lim its f or harmonic current em is sions (equipm en[...]

Issue A1 9 Electro- Magnetic Comp atib ility MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 71 9.1.4 Genera l cases of EMC performan ce Three G eneral ca ses of EMC perf orm ance are avail able as detailed belo w: Case 1: General Industrial Complianc e with the EMC Pr oduct Sta ndard f or Po wer Drive S ystem s EN 68100-3 for us e in Se[...]

9 Electro- Magnetic Comp atibility Issue A1 MICROMASTER 410 Operating Instructions 72 6SE6400-5EA 00-0BP0 Case 3: Filtered - for residential, commerc i al and li ght industry This level of perf ormance wil l allo w the m anufac turer / ass embler to self- certif y complia nce of the ir appar atus wit h the EMC directi ve for the residen tial, comm [...]

Issue A1 Fitting the O perator Panel MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 73 A p pendice s A Fitting the Operator Panel[...]

Applica ble St andards Issue A1 MICROMASTER 410 Operating Instructions 74 6SE6400-5EA 00-0BP0 B A p plicable Standard s European Low Voltage Dir ective The MICROM ASTER pr oduct r ange com plies with the r equirem ents of the Low Voltage D irecti ve 73/23/EEC as am ended b y Directiv e 98/68/E EC. The u nits are certif ied for c om pliance with the[...]

Issue A1 List of Ab brevia tions MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 75 C List of A bbr eviations AC Alternat ing Curr ent AI N Anal og Inpu t CT Constant T orque DC Direct Current DIN Digital In put EEC European Econom ic Communit y ELCB Earth Leakage C ircuit Break er EM C Electro- Magnet ic Com patibilit y EM I Electro- Ma[...]

Index Issue A1 MICROMASTER 410 Operating Instructions 76 6SE6400-5EA 00-0BP0 Index A Access Levels .......................................... 49 Altitude ..................................................... 19 Ambient o perating conditi ons .................. 19 Applica ble st andards European E MC Directive ...................... 74 European Low [...]

Issue A1 Index MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 77 MICROMAST ER 410 available o ptions .................................. 67 general ................................................. 15 main c haracteristics ............................. 15 perform ance characteris tics ................. 16 protection ch aracteristics ....[...]

Index Issue A1 MICROMASTER 410 Operating Instructions 78 6SE6400-5EA 00-0BP0[...]

MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 79 Suggestions and/or Co rrections Suggestions Correctio ns To: Siemens AG Automation & Driv es Group SD VM 4 P.O. Box 3269 D-91050 Erlangen Federal Republic of Germany For Pub licati on/Manual : MICROMAST ER 410 Em ail: Tec hnical.docum entatio n@con.s iemens .co.uk User Doc umentatio [...]

MICROMASTER 410 Operating Instructions 80 6SE6400-5EA 00-0BP0[...]

Issue A1 View of Units MICROMASTER 410 Operating Instructions 6SE6400-5EA 00-0BP0 81 Vie w of Un it Standard Inv ert er Inverter with Optional Operato r Panel Fitted Key: 1. Line T erminals 2. Status L ED 3. Operator Panel Con nec tor 4. Control T erm inals 5. Motor Terminals 6. DC+/DC- Term inals Connections & Ter min al s[...]

Siemen s AG Bereich Automat i on and Drives (A&D) Geschäftsgebi et Standard Drives (SD) Postfach 3269, D-91050 E rl angen Federal Republic of Germany © Siem ens AG, 2001 Subject to chan ge wi tho ut pri or notice Siemens Aktieng esells chaf t Ord er No.: 6SE6 400-5EA 00-0BP 0 Date: 10/0 1 Order Num ber *6SE6400-5EA00-0BP0*[...]