Siemens C79000 Z7076 C638 04 manuale d’uso

Operating Manual SIMA TIC SIMA TIC Box PC 620 C79000ĆZ7076ĆC638Ć04[...]

Safety Guidelines This operating manual contains notices which you should observe to ensure your own personal safety , as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger: ! W arning indicates that death, severe person[...]

iii SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Contents Welcome to your SIMA TIC Box PC 620 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information about this Manual vii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conventions viii . . . . . . . . . . . . . . . [...]

Contents iv SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6 Error Diagnosis and Reinstallation 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Problems When Using Modules from Other Manufacturers 6-2 . . . . . . . . . . . . 6.2 The Monitor Remains Dark 6-3 . . . . . . . . . . . . . . . . . . . . . .[...]

v SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Welcome to your SIMA TIC Box PC 620 Overview The SIMA TIC Box PC 620 serves as an entry-level system for PC-based automation, a basic component for PC-based HMI devices (Panel PC), a basic component for PC-based machine control panels (OP031, OP032S, OP032L) and in special configurations a[...]

Welcome to your SIMA TIC Box PC 620 vi SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Range of Application The SIMA TIC Box PC 620 is a basic device for high performance automation solutions. It meets the highest requirements through: • compliance with the requirements for a fire enclosure to UL1950/EN60950 (device with AC power supply[...]

Welcome to your SIMA TIC Box PC 620 vii SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Consignment/Assessories • Basic unit with preinstalled operating system • Power cord for AC supply or connector for DC supply (depending on device configuration) • Installation material (depending on device configuration) • Microsoft Windows ma[...]

Welcome to your SIMA TIC Box PC 620 viii SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Using the Manual Y ou can work with the operating manual in various ways. Either go through the chapters in turn or , depending on the initial situation, read the overview at the beginning of the chapter to find the desired topic. The following table [...]

1-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Important Information 1.1 Safety Instructions ! Caution The safety instructions given on the reverse of the title page of this manual must be observed. Before adding to the SIMA TIC Box PC 620 ’ s functionality by expanding the hardware configuration (see Section 4.1) refer to the elec[...]

Important Information 1-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Power Connection The device is intended for service in grounded electricity supply systems (TN systems to VDE 0100, part 300, or IEC 364 –3). Service in non-grounded or impedance-grounded supply systems (IT systems) is not intended. The power cord should meet the [...]

Important Information 1-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Country-Specific Information For the United States and Canada: In the United States and Canada USA, a CSA or UL-listed power supply cable must be used. The male plug is a 5-15 style. For operation with 120 V : Use a UL Listed, CSA Labelles Cord Set, consisting of a [...]

Important Information 1-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Battery There is a battery on the motherboard in this device. Batteries may only be exchanged by technical personnel. Observe the local regulations on disposal of special waste when disposing of dead batteries. ! Note There is the danger of an explosion, if the batt[...]

Important Information 1-5 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 1.2 Certificates, Directives and Declarations Notes on the CE Symbol The following applies to the SIMA TIC product described in this operating instruction: EMC Directive This product fulfils the requirements for the EC directive 89/336/EEC on “ electromagnetic com[...]

Important Information 1-6 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 ISO 9001 Certificate The quality assurance system for the whole product process (development, production, and marketing) fulfills the requirements of ISO 9001 (corresponds to EN29001: 1987). This has been certified by the German society for the certification of qual[...]

Important Information 1-7 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 EMC USA Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pr[...]

Important Information 1-8 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04[...]

2-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Commissioning the SIMA TIC Box PC 620 2.1 Unpacking and Checking the Scope of Delivery Unpacking the SIMA TIC Box PC 620 Unpack your SIMA TIC Box PC 620 programming device as follows: 1. Remove the packing. 2. Do not throw the original packing away . Keep it in case you have to transport[...]

Commissioning the SIMA TIC Box PC 620 2-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 2.2 Installing the SIMA TIC Box PC 620 The SIMA TIC Box PC 620 can be operated in all the usual fitting positions. It is particularly suitable for fitting in consoles, switch boards and control panels. The SIMA TIC Box PC 620 with AC power supply mee[...]

Commissioning the SIMA TIC Box PC 620 2-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Depending on the configuration of the device, two mounting brackets are included in the scope of delivery . Y ou can attach these to the housing with 6 screws (M3x6). M4 thread, max. depth of engagement 5 mm M3 thread, max. depth of engagement 5 mm E[...]

Commissioning the SIMA TIC Box PC 620 2-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 297.2 m m 1 1.701 ” 79.5 mm 3.13 “ 301 mm 1 1.85 “ 286 mm 1 1.26 “ 267 mm 10.512 “ 232 mm 9.134 “ 1 1,2 mm 0.441 “ 5 mm 0.197 “ 26 mm 1.024 “ Figure 2-2 Dimension Drawings for Fitting in Control Panel with Installation Angle (Device[...]

Commissioning the SIMA TIC Box PC 620 2-5 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 297.2 m m 1 1.701 ” 100 mm 3.94 “ 301 mm 1 1.85 “ Figure 2-3 Dimension Drawings for Fitting in Control Panel (Device with CD-ROM Drive)[...]

Commissioning the SIMA TIC Box PC 620 2-6 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 1 1.2 mm 0.441 “ 267.2 mm 10.52 “ 79.5 mm 3.13 “ 267 mm 10.512 “ Figure 2-4 Dimension Drawings for Fitting in Control Panel without Installation Angle[...]

Commissioning the SIMA TIC Box PC 620 2-7 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Permissible Fitting Positions of the PC with Floppy Disk Drive An inclined position of + 20 _ is allowed in each of the permissible fitting positions. FDD Interfaces Fan Interfaces FDD Interfaces Fan FDD Interfaces Fan Interfaces Fan FDD Interfaces F[...]

Commissioning the SIMA TIC Box PC 620 2-8 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 2.3 Preparing for Operation Connection to the Power Supply Unit Note The SIMA TIC Box PC 620 is equipped with a safety-tested mains cable and may only be connected to a grounded grounding outlet. Make sure that the socket on the device or the groundi[...]

Commissioning the SIMA TIC Box PC 620 2-9 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Connecting and Switching on the SIMA TIC Box PC 620 Before you connect the SIMA TIC Box PC 620 to the mains, the keyboard, mouse and display or monitor must be connected. 1. Insert the connector cable of these peripheral units into the corresponding [...]

Commissioning the SIMA TIC Box PC 620 2-10 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 2.4 T ransport T ransporting Despite the fact that the SIMA TIC Box PC 620 is of rugged design, its internal components are sensitive to severe vibrations or shock. Y ou must therefore protect your PC from severe mechanical stress when transporting [...]

3-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Hardware Components of the SIMA TIC Box PC 620 This chapter provides you with information on hardware components and their functions, such as: • Right- and left-hand side panel of the device • Connectors and ports • PC-Cards • Drives • Backup battery 3[...]

Hardware Components of the SIMA TIC Box PC 620 3-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.1 Right-Hand Side of the Device (Port Side) Keyboard Ethernet MPI/DP USB VGA LPT1/Printer Mouse COM1/V24/AG COM2 PCI slot PCI/ISA slot PC Card * 1 * 2 Figure 3-1 Right-Hand Side of the Device with Ports * 1 Without TTY for the basic varian[...]

Hardware Components of the SIMA TIC Box PC 620 3-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Connections Function VGA VGA port for connecting an external monitor , 15 pins, subminiature Cannon connector , sockets COM1/V24/AG*3 Serial port 1 (V24, via BIOS-Setup can be switched to TTY), 25 pins, subminiature Cannon connector , socket[...]

Hardware Components of the SIMA TIC Box PC 620 3-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.2 Left-Hand Side of the Device (Drive Side) Fan Floppy disk drive Cover for front ports Plastic rivet Name plate Reset button Figure 3-2 Left-Hand Side of the Device Connections Function Device fan Cooling Floppy disk drive with ejector ( [...]

Hardware Components of the SIMA TIC Box PC 620 3-5 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.3 Ports Front Ports The front ports are located behind the cover below the floppy disk drive. They are used for connection of the following front elements: • I/O port for the connection of front components • L VDS display port • CMOS[...]

Hardware Components of the SIMA TIC Box PC 620 3-6 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Connecting USB Devices You can connect peripheral devices with USB interfaces to the USB port. • Plug the USB cable into the port The device connected in this way is available as soon as it has been registered by the Plug and Play operatin[...]

Hardware Components of the SIMA TIC Box PC 620 3-7 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Connect Ethernet The drivers for the Ethernet interface are pre-installed. A wait period of approxima- tely 30 results if no Ethernet cable in inserted or no active node is found during the startup of the operating systems Windows 98 or Wind[...]

Hardware Components of the SIMA TIC Box PC 620 3-8 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.4 PC Card Port Cardbus cards and PCMCIA cards can be operated through the PC card port of the SIMA TIC Box PC 620. PC card port T ype I/II/III Figure 3-4 PC Card Port The following is to be observed when working with cardbus/PC cards: 1. O[...]

Hardware Components of the SIMA TIC Box PC 620 3-9 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Note Peak currents of 650 mA at 5 V based on 3 s are permitted! Examples of PCMCIA cards connected to PC card interface for Hard Disk 330 mA read/write (Maxtor MXL-131-III) 640 mA spin up 2 s . . . . . 1 10 mA idle . . . . . . . . . . . . . [...]

Hardware Components of the SIMA TIC Box PC 620 3-10 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.5 Drives The SIMA TIC Box PC 620 is equipped as standard with a 3.5 ” disk drive or an LS 120 drive and a 3.5 ” hard disk drive. 3.5.1 Disk Drive (Depending on the Device Configuration) Y ou can store programs and data on diskettes wi[...]

Hardware Components of the SIMA TIC Box PC 620 3-1 1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.5.2 LS120-Drive (Depending on the Device Configuration) The SIMA TIC Box PC 620 can be equipped with an LS120 drive as an alternative to a floppy disk drive. Larger volumes of data can be stored on LS120 data carriers than on a 1.44 MB f[...]

Hardware Components of the SIMA TIC Box PC 620 3-12 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Information on the LS120-disk drive Restrictions P T ools under STEP 5 Data cannot be edited in PCP/M format on the LS120-drive using P T ools under STEP 5. Authorization with Authors Vx.x In order to authorize STEP 5 and other SIMA TIC com[...]

Hardware Components of the SIMA TIC Box PC 620 3-13 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Note In order to achieve a reliable operation and high data security , please note the following during use: • Store and transport the Superdisk in the protective cassette included. Doing this will keep dust and dirt from the disk. • Re[...]

Hardware Components of the SIMA TIC Box PC 620 3-14 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.5.3 Hard Disk Drive The hard disk drive is used for the storage of large quantities of data. it is fitted in a mounting which is easily exchangeable and damped against vibration. ! Caution Risk of loss of data and damage to the drive! Dri[...]

Hardware Components of the SIMA TIC Box PC 620 3-15 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Closing the Drawer Push in the drawer until it closes completely . Do not press the eject button. Note The EJECT function of fered by various applications for opening the CD-ROM drawer does not work with this drive. After the drawer has bee[...]

Hardware Components of the SIMA TIC Box PC 620 3-16 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 CD-ROM Front Access LED Drawer Eject button Emergency eject Figure 3-7 CD-ROM Front ! Caution Risk of data loss and damage to the drive! CD-ROM drives are sensitive to vibrations and shock. Any vibrations occuring during operation can lead [...]

Hardware Components of the SIMA TIC Box PC 620 3-17 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 3.6 Backup Battery A backup battery (3.6 V lithium battery) powers the hardware clock even after the programming device is switched off. There is a battery on the motherboard in this device. Batteries may only be exchanged by technical pers[...]

Hardware Components of the SIMA TIC Box PC 620 3-18 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04[...]

4-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Connection of System Expansions and External Devices 4.1 Connecting Peripheral Devices It is possible to expand the SIMA TIC Box PC 620 ’ s functionality by installing additional modules. Due to the rugged design and the high functionality the device is easy and economical to service. [...]

Connection of System Expansions and External Devices 4-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04[...]

5-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Setting up the SIMA TIC Box PC 620 5[...]

Setting up the SIMA TIC Box PC 620 5-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 5.1 Preparing for Start Up Powering Up the SIMA TIC Box PC 620 Both the operating system and system software supplied with the SIMA TIC Box PC 620 are preinstalled on the hard disk and are set up by the time you power up your PG for the first time. The [...]

Setting up the SIMA TIC Box PC 620 5-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Startup under Windows 98 The operating system is set up once you have entered the requisite information. The Welcome to Windows 98 screen helps you to get familiar with the Desktop user interface. Now the user interface is displayed following system sta[...]

Setting up the SIMA TIC Box PC 620 5-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 5.3 Complete Restart of the SIMA TIC Box PC 620 Overview Once the SIMA TIC Box PC 620 ’ s operating system is set up, the user interface of the operating system is displayed following system startup every time you switch on or reset the PG. 5.4 Electr[...]

6-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Error Diagnosis and Reinstallation Chapter Overview This chapter provides you with tips on how to localize and troubleshoot frequently occurring problems. • Please look up the meaning of operating system error messages in your operating system documentation. • Y ou will find error me[...]

Error Diagnosis and Reinstallation 6-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.1 Problems When Using Modules from Other Manufacturers Error Display The PC crashes during power up. Cause The following causes are possible: – Double assignment of I/O addresses – Double assignment of hardware interrupts and/or DMA channels – S[...]

Error Diagnosis and Reinstallation 6-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.2 The Monitor Remains Dark Cause and Remedy The following causes are possible: The monitor has been switched off. • Switch on the monitor . The monitor is in “powersave” mode. • Press any key on the keyboard. The brightness button has been set[...]

Error Diagnosis and Reinstallation 6-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.3 The Screen Display Does not Appear or Drifts Cause and Remedy Either the incorrect line frequency and/or the incorrect resolution is set for the screen or for the user program. • Stop the user program. If the error still occurs after you have ende[...]

Error Diagnosis and Reinstallation 6-5 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.5 The Clock Time and/or the Date in Y our PC Is Incorrect Remedy Set the clock time and the date in the setup menu. Press <F2> to call setup when booting the computer . Note The battery is dead if the clock time and the date are still incorrect [...]

Error Diagnosis and Reinstallation 6-6 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Error Message on the Screen Meaning/Suggestion Incorrect Drive B type Run SETUP Check the SETUP entries for drive B. Diskette drive A error Error accessing drive A. Contact your technical support team. Diskette drive B error Error accessing drive B. Con[...]

Error Diagnosis and Reinstallation 6-7 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.8 Diagnostic Messages (Port 80) When the SIMA TIC PC is powered up, it runs a self-test (POST = Power On Self-T est). If the POST detects a fault, it outputs the sequence of beeps (beep code) assigned for the fault. Each beep code consists of 2 x 2 se[...]

Error Diagnosis and Reinstallation 6-8 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 The POST codes in order of occurrence: Display (hex) Meaning Description 02 TP_VERIFY_REAL T est whether the CPU is in real mode 1C TP_RESET_PIC Reset the interrupt controller 12 TP_RESTORE_CRO Restore the controller register 13 TP_PCI_BM_RESET Reset th[...]

Error Diagnosis and Reinstallation 6-9 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Display (hex) Description Meaning C1 TP_740_INIT Initialize the PG 740 I/Os 34 TP_CMOS_TEST T est the CMOS RAM 3C TP_ADV_CS_CONFIG Configure the advanced chip set 42 TP_VECTOR_INIT Initialize the interrupt vectors 46 TP_COPYRIGHT T est the copyright 49 [...]

Error Diagnosis and Reinstallation 6-10 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Display (hex) Description Meaning 88 TP_BIOS_INIT V arious initialisations 8A TP_INIT_EXT_BDA Initialize the external BIOS data area 85 TP_PCI_PCC Determine the PCI circuits 82 TP_RS232 Determine the serial interfaces 84 TP_LPT Determine the parallel i[...]

Error Diagnosis and Reinstallation 6-1 1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.9 Restoring the Hard Disk 6.9.1 Creating Partitions unter Microsoft Windows 98 After installing a new hard disk it is necessary to create partitions with the program “FDisk” when the partitions have errors or need to be changed. Note By deleting[...]

Error Diagnosis and Reinstallation 6-12 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Creating an Extended Partition In order to create an extended partition, you have to first boot from the Windows 98 CD as described in steps 1 to 4 above. Using ”A:>FDisk” start the Recovery CD hard disk configuration program. Select the dialog[...]

Error Diagnosis and Reinstallation 6-13 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 7. T o format the partition from the Recovery CD, as described above in steps 1 to 3, reboot and then format drive C: with the “Format” program. Enter: ” A:>Format C:” (A: is the CD-ROM drive). Creating an Extended F A T 32 Partition In ord[...]

Error Diagnosis and Reinstallation 6-14 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 T o restore the partitions to their original condition, please do the following: Primary Partition 1. T o boot from the Recovery CD proceed as follows: When the message Press <F2> to enter Setup appears on the screen press the ESC key . After ini[...]

Error Diagnosis and Reinstallation 6-15 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.10 Installation of the Windows Operating System Dependent on the device model, dif ferent operating system CDs are shipped: Microsoft Windows NT or Recovery Microsoft Windows NT , Microsoft Windows 98 SE or Recovery Microsoft Windows 98 SE, Recovery [...]

Error Diagnosis and Reinstallation 6-16 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 4. When “ Microsoft Windows 98-Startup Menu ” is displayed, select “ 1. Boot for CD-Recovery ”. 5. Y ou have to acknowledge the “ SIEMENS End User License Agreement ” with the F8 function key . Pressing ESC allows you to decline the agreeme[...]

Error Diagnosis and Reinstallation 6-17 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 4. When “ Microsoft Windows 98-Startup Menu ” is displayed, select “ 2. Boot from CD-ROM ”. 5. In the “ Microsoft Windows 98-Start Menu ” select “ 1. Start Windows 98 Setup from CD-ROM ” . Installation of the Recovery CD in Microsoft Wi[...]

Error Diagnosis and Reinstallation 6-18 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 8. Confirm the end massage box. 9. Start the Windows setup program L W:IWIN98SETUP.exe L W is the drive where the recovery data have been copied. 10. After starting the setup.exe please follow the screen instructions. 6.10.3 Installing the Recovery C[...]

Error Diagnosis and Reinstallation 6-19 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Note By default, drive C: is used for the data transfer (Recovery). Ensure that there is an available disk space of approximately 500 MB left on drive C: after the selected recovery data have been copied. 8. Confirm the end massage box. 9. Start the Wi[...]

Error Diagnosis and Reinstallation 6-20 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 6.1 1 Installing Drivers and Software T o install the drivers and software from the “ Documentation and Drivers ” CD supplied, proceed as follows: 1. Place the “ Documentation and Drivers ” CD in the CD ROM drive. 2. Start the Start programm on[...]

7-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 T echnical Specifications 7[...]

T echnical Specifications 7-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 7.1 T echnical Specifications of the SIMA TIC Box PC 620 General Order nos. See order documentation Dimensions (w x h x d) 295x265x80 mm, without CD-ROM drive 295x265x100 mm, with CD-ROM drive Weight approx. 6kg (13.5 lbs.) Supply voltage (U N ) 120 V (85 V to 1[...]

T echnical Specifications 7-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Ambient Conditions Temperature – operation – storage/transport – gradient tested to DIN EN 60068-2-2:1994, DIN IEC 60068-2-1,DIN IEC 60068-2-14, + 5 ° C to +45 ° C - 20 ° C to +60 ° C (Max. speed of temperature change 10 o C/h (50 o F/h) condensation n[...]

T echnical Specifications 7-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Ports COM1 * 1 Serial port 1 (V .24 / TTY), 25 pin subminiature Cannon connector COM2 Serial port 2 (V .24), 9 pin subminiature Cannon connector LPT1 Parallel port (standard, EPP and ECP mode) Connection for printer with parallel port VGA VGA port, connection fo[...]

8-1 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Hotline Services 8.1 Customer Support, T echnical Support Open round the clock, worldwide: Johnson City Nuremberg Singapore SIMA TIC Hotline W orldwide (Nuremberg) T echnical Support (FreeContact) Local time: Mon.-Fri. 7:00 to 17:00 Phone: +49 (180) 5050-222 Fax: +49 (180) 5050-223 E-Mai[...]

Hotline Services 8-2 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 8.2 SIMA TIC Customer Support Online Services Further Support If you have questions related to the use of the products which are not answered in this manual, please consult your Siemens representative in your local agency . http://www.ad.siemens.de/partner T raining Cent[...]

Hotline Services 8-3 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 8.3 Regional Repair Centers Region Phone Fax Augsburg +49 (821)2595 599 +49 (821)2595 546 Berlin +49 (30)386 34926 +49 (30)386 34933 Bielefeld +49 (521)291 323 +49 (521)291 538 Bremen +49 (421)364 2093 +49 (421)364 2107 Chemnitz +49 (371)475 3860 +49 (371)475 3888 Erlang[...]

Hotline Services 8-4 SIMA TIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Country Phone Fax Argentina +54 (1) 3408400 +54 (1) 3408400 3163 Australia +61 (3) 9420 7274 +54 (3) 9420 7500 Belgium +32 (2) 536 2905 +32 (2) 536 2880 Brazil +55 (1 1) 7947 1999 ext. 3013 +55 (1 1) 7947 1888 China +86 (21) 6213 2050 ext. 301 +86 (21) 6213 5538 Denmark [...]