Siemens Gigaset 2010 manuale d’uso

Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Gigaset 20 1 0 BK_FRONT.FM 14.8.98 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite s The cordless digital DECT telephone system expandable to 6 handsets Operating instructions Before starting up the equipment, please read these operating instructions with th[...]

KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Gigaset® 2 01 0 Wegweiser Switching the telephone on ( ➔ page 1). Making a call ( ➔ page 24). Registering new handsets at the base station ( ➔ page 49). Internal calls ( ➔ page 28). Making the first call Using additional handsets Quick reference guide ( ➔ page 57 ). The [...]

KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Gigaset 20 10 1 2 3 4 5 6 7 8 9 10 11 12 Earphone Display St ore key Speed dial (delete) key On-hook key Inter com key Star key Recall key Mi c ro ph on e ON/OFF/PROTECTED key Last Number Redial Off-hook key 13 14 15 16 17 18 19 20 21 Pound key Paging key (calling mobile [...]

KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Keys Keys on the base station Keys on the Gigaset 1000S mobile unit ? Green paging key to call all handsets or to register new handsets. B Memory key to initialize procedures. C Speed dial and delete ke y . O Redial key (also used for procedures). 1 t o 0 , * an d # Diall[...]

A1 KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Key functions and display symbols Display Symbols (top line) Display symbols (bottom line) All digits and characters are displayed on the top line, whi- le the symbols for various operating modes are displayed on the bottom line. A f N b E F G H u P z A H n - 8 8 8 8 8[...]

A2 KAP00.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Overview: Meaning of symbols ➔ page 2 (cross-reference to a related topic). B #* 5 Press keys in this sequence. ? Press key from the base station. Q Delete function of the speed dial ke y. 1 ... 6 Press one of the following keys. o Enter numbe r . If it is necessary you will s[...]

A3 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 KAP01.FM5 14.8.98 Safety precautions ● Do not submerge batteries in water; do not throw them into fire. ● Do not dispose of old, defective batteries with normal household garbage. ● Batteries become warm during charging. This is nor- mal and not dangerous ● Do not use any third-party char[...]

A4 KAP01.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Certification and CE marking Siemens Gigaset  2010 was certified according to EU guideline 91/263/EEC (CTR 6, CTR 10). Anyone is per- mitted to connect this telephone to a telephone jack and use it . This telephone fulfils the requirements of the following EU guidelines: 89/3[...]

Contents GIGA2010.IVZ 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Stepwise startup .......................................................................................................................... 1 Step 1: Observe the safety precautions .........................................................................................[...]

Contents GIGA2010.IVZ 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Internal consultation calls and transferring calls ................................................................... 30 Consultation calls ......................................................................................................................... 30 Tran[...]

Stepwise startup 1 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Stepwise startup Follow the installation and setup instructions “step by step” as described . Step 1: Observe the safety precautions Step 2: Check the contents of the package The factory package contains : ● a Gigaset 2 01 0 base station , ● a Gigaset 200[...]

Stepwise startup 2 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 3: Connecting the base station Phone cord Insert the RJ- 1 1 plug on your phone cord into the base sta- tion . The jack on the bottom of the base station is marked with the following symbol : Insert the phone plug on your phone cord into your phone socket . [...]

Stepwise startup 3 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 4: Inserting the batteries into the handset The handset is powered by two batteries. Hold the handset with the keypad side facing down. Slot the batteries into the battery compartment. Slide the cover of the battery compartment from above into the grooves in[...]

Stepwise startup 4 KAP02.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Step 6: Check signaling method Telephone lines can use the following signaling methods: ● dial pulsing ( DP ) ● dual-tone multifrequency signaling (DTMF ) The factory default for your Gigaset 2 01 0 is DTM F . Checking your own telephone ’s signalling metho[...]

Notes on operation 5 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Notes on operation Installing the base station Installation site/installation area ● A 220/230V power socket must be located at the in- stallation site. ● In order to avoid interference, the base station should not be in the direct vicinity of other electr[...]

Notes on operation 6 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Notes on operating the handset For users who wear hearing aids If you wear a hearing aid, please note that radio signals can interfere with hearing aids, and if sufficiently loud, can cause a very unpleasant humming sound. Using rechargeable batteries The foll[...]

Notes on operation 7 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 When installing and using the rechargeable batteries, please follow the rules below: ● Initially charge the batteries thoroughl y. We recom- mend charging the batteries for approximately 16 hours without interruption (overnight for example). During the first[...]

Notes on operation 8 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Mounting the carrying clip onto the handset If required, you can mount the carrying clip supplied with the handset, e.g. if you wish to carry the handset in your pocket. Hold the handset with the keypad facing the palm of your hand. Y ou will see two small hol[...]

Notes on operation 9 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 T echnical data Standard: DECT = D igital E nhanced C ordless T elecommunications GAP = G eneric A ccess P rofile (standard adhered to by most manufacturers for DECT radio trans- mission) Number of channels: 120 duplex channels Radio frequency range: 1880 MHz [...]

Notes on operation 10 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Third party use/disposal Gigaset 2 01 0 telephone should only be passed onto third parties if the instructions for use are included. When the system or batteries have reached the end of their service life, they should be disposed of in an environ- mentally fr[...]

Notes on operation 11 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Procedure in the case of malfunctions Not every malfunction means that there is an actual de- fect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself. The information below will help you [...]

Notes on operation 12 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Symptom Cause Remedy With telephone systems: no connection or wrong con- nection after dialing from a memor y . Exchange code not entered Enter exchange code ( ➔ page 18). System code entered is re- jected. System code entered does not correspond with the c[...]

Notes on operation 13 Kap03.fm5 18.11.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 Overview: Signal tones tuuuuut tuuuut tuuuut tuuuut tut tut tut tut tut tuuuut tut tuuut tuuuuut tuuut tuuut 0.8 s tone 0.8 s pause Recall: 3 x 0.2 s tone repetition following 0.8 s pause Internal dial tone: 0.5 s tone 0.5 s pause Internal busy tone 0.5 s ton[...]

Operating modes 14 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating modes ON/OFF/PROTECTED modes Y ou can switch your handset to ● protected mode , ● off , ● and on ( again ). When the handset is in protected mode, it is protected against unintended use . The handset switches on auto- matically to receive incoming[...]

Operating modes 15 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Switching on the handset When the handset is in protected mode: Pr When the handset is switched off: Switching on the handset h Press the handset key briefl y . Y ou will hear the positive confirmation beep. The following message appears on the display when the h[...]

Operating modes 16 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Signaling method The PTT operates telephone connections with two differ- ent signaling methods: ● Dial pulsing (DP) ● Dual-tone multifrequency signaling (DTMF) The factory default setting for your Gigaset 2 01 0 is DTM F . Checking the signaling method of you[...]

Operating modes 17 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating in a telephone system To be able to operate your Gigaset 2 01 0 in a telephone system, you must first 1 . check the signaling method, 2. enter the exchange code, 3. enter the pause lengths after the exchange code. Possible signaling method settings The [...]

Operating modes 18 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Exchange codes For through connection to the public telephone network you must set: ● the exchange code ● the pause length after the exchange code (if a pause is necessary after entry of the exchange code) If the telephone system is connected as a subsystem t[...]

Operating modes 19 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Modify the pause length according to the excharge code Possible pause lengths are: 1 second 2 seconds 3 seconds (factory default) 6 seconds Deleting the exchange code Changing the system code, changing the PIN To protect your personal settings, Gigaset 2 01 0 has[...]

Operating modes 20 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Changing the system code Changing the handset PIN Resetting the base station to factory defaults Y ou can use this procedure to reset the following settings to factory defaults: ● Signaling method (DTMF/flash 300 ms) ➔ page 16 ● Pause length following excha[...]

Operating modes 21 KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Resetting the Gigaset 2000S handset to factory defaults Y ou can use this procedure to reset the following settings to factory defaults: ● Ringer volume ( ➔ page 34) ● Ringer tone ( ➔ page 34) ● Handset volume ( ➔ page 35) ● Base station number ( ?[...]

Incoming calls 22 KAP05.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Incoming calls Accepting calls An incoming call is indicated by the ringer (bell symbol) . Y ou will know that it is an external call when you the following message appears on your handset display: Y ou will know that you are receiving an internal call if you see [...]

Switching off the microphone (mute function) 23 KAP05.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Ex tern al call-waiting during internal calls If you are on an internal call with a second handset and a external call arrives, this is indicated by the call-waiting function . Y our internal call is terminated when you accept the ext[...]

External outgoing calls 24 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 External outgoing calls Calling external subscribers Y ou will hear the ring tone . Dialing with call number checking (en-bloc dialing) En-bloc dialing allows you to check the external call num- ber entered before it is dialed and correct it, if necessar [...]

External outgoing calls 25 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Manually inserting a pause If you repeatedly get the busy symbol following automatic dialing from the telephone director y , e.g. a f ter the country code, you can enter a pause (three seconds), e.g. bet- ween the exchange or country code and the call num[...]

External outgoing calls 26 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Dialing speed dial numbers Y ou can dial a call number by pressing the digit key used to store the number ( ➔ page 38). Dialing with speed dial numbers and number check c Press off-hook key. Y ou will hear the dial tone . Q o Press speed dial key and en[...]

External outgoing calls 27 KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Device control using dual-tone multifrequency signaling (DTMF) If your telepone is connected to a line with dial pulsing (DP), you can switch to dual-tone multifrequency signaling (DTMF) once the connection has been set up. Precondition: an external conne[...]

Collective ringing and internal calls 28 KAP07.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Collective ringing and internal calls Making collective calls to all handsets from the base station It can be useful to make a collective call from the base sta- tion, for example, to locate mislaid handsets. It is not pos- sible to make int[...]

Collective ringing and internal calls 29 KAP07.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Allowing internal parties to listen in on a call It is possible to enable an internal party to listen in on a call with an external party from his/her handset . Precondition: An external connection must be already set up . Disconnect interna[...]

Internal consultation calls and transferring calls 30 KAP08.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Internal consultation calls and transferring calls During a external call it is possible to: ● hold a consultation call with an internal part y, ● transfer the external call to the internal part y . Consultation calls When m[...]

Internal consultation calls and transferring calls 31 KAP08.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 T ransferring calls When more than one handsets are in operation It is possible to transfer an external call to an internal party when more than one handset is in operation ( ➔ page 51). When a telephone system is in operation[...]

Base station settings 32 KAP09.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Base station settings Y ou can program your Gigaset 2 01 0 to suit your own indi- vidual requirements. The settings are made from a regis- tered handset. Switching the base station ringer off and setting the ringer volume It is possible to define whether th[...]

Base station settings 33 KAP09.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting the base station ringer tone It is possible to define the tone used to signal calls at the base station. Y ou can choose from a range of six tones. The factory default is level 1 . Switching music-on-hold on/off If you are connected to an external u[...]

Individual settings on the Gigaset 2000S mobile unit 34 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Individual settings on the Gigaset 2000S mobile unit Y ou can configure your mobile unit individuall y . All settings are made directly at the mobile unit. If a number of mobile units are in operation, the mobile unit must be [...]

Individual settings on the Gigaset 2000S mobile unit 35 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting the handset volume The handset has three volume settings: The factory default is level 1 (normal). Activating/deactivating notification and warning tones Activating/deactivating the key confirmation tone If the tone is[...]

Individual settings on the Gigaset 2000S mobile unit 36 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the negative confirmation tone If the negative confirmation tone is activated, each incor- rect entry is confirmed acousticall y. Y ou can switch the negative confirmation tone on (factory default) or o[...]

Individual settings on the Gigaset 2000S mobile unit 37 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the synchronization tone If the synchronization tone is active, the unit signals when you come back within range of a base station. Y ou can switch the synchronization tone on (factory default) or of f [...]

Individual settings on the Gigaset 2000S mobile unit 38 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Speed dial numbers Y ou can store speed dialling numbers for frequently re- quired external numbers. These speed dialling codes can then be used for calling outside numbers ( ➔ page 26). Checking or store speed dial numbers [...]

Individual settings on the Gigaset 2000S mobile unit 39 Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Notebook function Y ou can store a directory number as a speed dial number during a call. Clearing all speed dial numbers B Q Initiate procedure. o Select speed dial number: enter digits from 0 to 9. The speed dial number and [...]

Activating/deactivating the call duration display 40 KAP11.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating the call duration display In the case of external calls ( ➔ page 24), the call duration display is started approximately 12 seconds a f ter the last digit is dialed. The display remains visible for about[...]

The Gigaset 2010 lock functions 41 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 The Gigaset 2 01 0 lock functions Activating/deactivating the Gigaset 2 01 0 lock for outgoing calls It is possible to lock the Gigaset 2 01 0 for outgoing calls. If emergency numbers are stored, they can be dialed even if the lock is active. It i[...]

The Gigaset 2010 lock functions 42 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Displaying and storing emergency numbers Deleting all emergency numbers B # 2 5 Start the setting procedure. o O Enter the fou r -digit system code (factory default “0000“) ( ➔ page 19). The first emergency number stored in the memory is sho[...]

The Gigaset 2010 lock functions 43 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Barred numbers for handsets By storing barred numbers for each registered handset, you can prevent certain external call numbers or types of number from being dialed if the call number lock is acti- vated ( ➔ page 44). Thus, for example, you can[...]

The Gigaset 2010 lock functions 44 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Deleting all barred numbers Activating/deactivating the call number lock Y ou can activate and deactivate the call number lock sep- arately for each registered handset. Other handsets are not affected by the lock. Calls can still be accepted on th[...]

The Gigaset 2010 lock functions 45 KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Setting trunk access for the handsets Y ou can define for each registered handset whether exter- nal calls can be made from it or not. A distinction is made between: ● Unrestricted trunk access (factory default) – exter- nal calls allowed, and[...]

Lock functions on the handset 46 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Lock functions on the handset Activating/deactivating the handset lock Y ou can lock your handset for outgoing external calls to protect it against unauthorized use. If a DSS number is stored on the handset, it can still be dialed if the lock functi[...]

Lock functions on the handset 47 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Display or store a DSS number Deleting a DSS number B 8 8 Start setting procedure. o Enter the handset PIN (factory default “000 0 “). ( ➔ page 20). The current setting is shown on the handset displa y . : : B Quitt display. or O Define a new [...]

Lock functions on the handset 48 KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Handset display with active lock Display with locked handset Display with system lock Display with call number lock Display with outward-restricted trunk access or internal access The handset lock is switched on and there is no DSS number ( ➔ page[...]

Registering/de-registering more than one handsets at the base station 49 KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Registering/de-registering more than one handsets at the base station Y ou can operate up to six handsets from the Gigaset 2000 family at a Gigaset 2 01 0 base station. The handset supplied with your telephone[...]

Registering/de-registering more than one handsets at the base station 50 KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 De-registering a handset from a base station o # Enter fou r -digit base code ( ➔ page 19) (factory default: “0000“) und then press # . The remaining available in- ternal numbers are shown on the display[...]

Operating more than one handset 51 KAP16.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operating more than one handset Ring priority for incoming calls It is possible to set how incoming calls should be signaled when operating several handsets. A distinction is made between: ● Collective call (factory default) – incoming calls a[...]

Operating more than one handset 52 KAP16.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Excluding or reintegrating a handset from/into collective ringing Selecting a handset for ring priority Setting the number of rings for ring priority B # 1 Start the setting procedure. o Enter the fou r -digit base code (factory default:”0000“[...]

Operation at more than one base station 53 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Operation at more than one base station Y ou can register and operate your handset at up to 6 Gigaset base stations . This offers the following advantages: ● Y ou can operate the same handset at base stations in different geographical lo[...]

Operation at more than one base station 54 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Activating/deactivating base station number display on handset Y ou can program your handset to display the base station with which the unit has radio contact. Selecting the best station Normall y , radio contact is automatically reestabli[...]

Operation at more than one base station 55 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 With Gigaset 2000S handset Automatic search for a base station if the preferred base station cannot be reached A f ter selecting a preferred base station, a combined se- arch for base stations can be conducted as follows: – for 30 second[...]

Operation at more than one base station 56 Kap17.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Reset the factory default Y ou can reset the handset to the factory default: With Gigaset 2000S handset B ü 0 Start the setting procedure. The numbers of the base sta- tions at which the handset is registered are displayed. : B Select bes[...]

Quick reference guide handset Gigaset 2000S 57 KAP20A.FM5 12.3.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Quick reference guide handset Gigaset 2000S Switch handset to ON/OFF/PROTECTED: h Accepting a call: Call rings: remove the handset from the charging unit or press the off-hook key c (it is possible to set the auto- matic call acceptan[...]

Index 58 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 B Barred numbers deleting ................................................... 44 details ..................................................... 43 displaying ................................................ 43 storing ..................................................[...]

Index 59 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 H Handset Activating/deactivating base station number ............................... 54 collective call .................................... 28 , 51 de-registering at the base station ........... 50 listening in .............................................. 29 lock[...]

Index 60 GIGA2010.SIX 12.03.1998 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619 Ring priority for incoming calls ...................... 51 Ringer tone handset Gigaset 2000S .................. 34 volume handset Gigaset 2000S .............. 34 Ringer volume base station ............................................ 32 Rings base station ...........[...]

KAP21.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619 U6 Issued by the Private Communication Systems Division Hofmannstrasse 5 1 , D-81359 München © Siemens AG 1998. All rights reserved. Delivery subject to availability. Technical modification reserved. Siemens Aktiengesellschaft http://www.siemens.de Order no. A30852-X 11 00-E3 01-[...]