Singer H74 manuale d’uso

Instruction Manual H74[...]

SYMBOL INSTRUCTIONS Raise needle Raise presser foot Lower presser foot[...]

IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety should always be followed, including the following: Read all instructions before using this sewing machine. - T o reduce the risk of electrical shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this appliance from the electric outl[...]

PRINCIP AL P ARTS OF THE MACHINE MACHINE CONTROL BUTT ONS LCD SCREEN P A TTERN CHART ACCESSORIES CONNECTING THE MACHINE T O THE POWER SOURCE WINDING THE BOBBIN INSERTING THE BOBBIN THREADING THE UPPER THREAD USING THE NEEDLE THREADER DRAWING UP THE L OWER THREAD .................................................. CUTTING THE THREAD TWO -STEP PRESSER[...]

CONTENTS BLIND HEMS BUTT ON SEWING CORDED BUTT ONHOLES BAR T ACK STIT CH EYELET STIT CH DARNING STIT CH ZIPPER INSERTION NARROW HEMMING CORDING SA TIN STITCH SEWING EDGE/QUIL TING GUIDE GA THERING SMOCKING FREE MO TION SEWING WALKING FOO T F AGO TING DECORA TIVE TOPSTIT CHING SCALL OP STIT CH EL ONGA TION MIRROR IMAGE USING THE TWIN NEEDLE MEMORY W[...]

1 Operation buttons A Thread cutter Face plate Buttonhole lever Auto needle threader Sewing table and accessory box Function buttons Function buttons Speed limiting adjustment lever B B Selection buttons C Bobbin winder spindle Needle plate cover T ension dial Stitch pattern plate clip* Hole for second spool pin P ower cord socket Handwheel Main po[...]

2 1. Start/stop button 3. Reverse button 4. Auto-lock button 5. Needle up/down position button Press this button to start or stop the machine. Hold down this button to sew stitches in reverse or sew reinforcement stitches at a low speed. Hold down this button to sew locking stitches immediately or at the end of the current patterns and automaticall[...]

8. Stitch length adjustment buttons 9. T win needle button 10. Mirror button 11. Elongation button Press this button to adjust the length of the stitch. Press this button to fix the width range when using the twin needle to sew . Press this button to sew a reflection pattern. B Group P atterns 33 to 45 can be elongated up to five times its normal l[...]

4 P attern Sound off LCD SCREEN P attern Alphabet Needle up position Auto-lock Reverse Tension Needle position Stitch length Suggested presser foot and identification letter Twin needle Bobbin winding Buttonhole lever Pattern Sound on Pattern number Tension Stitch width Suggested presser foot and identification letter Mirror Auto-stop Stitch width [...]

EDIT M Memory LCD SCREEN 5 Editing patterns Sewing the memorized pattern Amount of elongation Elongation Elongation Edit mode Memory group Number of current unit Total number of unit Pattern to edit M Memory mode[...]

6 P A TTERN CHART P atterns B Group Patterns -50 C Group Patterns -66 29 30 23 22 24 25 26 27 28 21 31 32 33 34 35 37 38 36 39 40 17 19 18 20 01 03 05 06 07 10 11 12 16 13 02 04 08 09 15 14 49 48 45 41 44 42 43 50 46 47 29 30 23 22 24 25 26 27 28 21 31 32 33 34 35 37 38 36 39 40 17 19 18 20 01 06 07 10 11 12 16 13 02 08 09 15 14 12 3 4 5 6 7 8 9 0 [...]

7 P A TTERN CHART Alphabets Block style 01 02 03 04 05 06 07 08 09 10 11 1 2 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 89 90 91 92 93 94 95 96 97 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 01 02 03 04 05 06 [...]

ACCESSORIES 8 Standard Optional T 006186008 All purpose foot E 006907008 Overcasting foot 006099008 Brush/ Seam ripper Screwdriver (L & S) 006012008 I 006905008 Zipper foot F 006904008 Blind hem foot 006914008 Button sewing foot Auxiliary spool pin H1D0073210 D 006H1A0004 Buttonhole foot A 006172008 Satin stitch foot M 006813008 Cording foot 00[...]

9 Connecting the machine Before connecting the power supply , make sure that the voltage and frequency shown on the machine is conforming with your electrical power . Place machine on a stable surface. 1. Connect the power line cord to the machine by inserting the 2-hole plug into the power cord socket. 2. Connect the power line plug to the electri[...]

10 Bobbin winding WINDING THE BOBBIN Place the thread and spool holder onto the spool pin. F or larger spools of thread, place the large side of the spool holder toward the spool. F or smaller spools of thread, place the small side of the spool holder toward the spool, or use the small spool holder . If the thread spool has a thread retaining slit,[...]

11 WINDING THE BOBBIN Please Note: When the bobbin winder switch is placed on the right, "bobbin winding position", the machine will not sew and the handwheel will not turn. T o start sewing, push the bobbin winder switch to the left "sewing position". Hold the thread tail securely in one hand. Press the Start/stop button or the[...]

12 INSERTING THE BOBBIN Attention: T urn power switch to off ("O") before inserting or removing the bobbin. When inserting or removing the bobbin, the needle and presser foot must be fully raised. 1 Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction (arrow). 1 2 Pull the thread through the slit (A[...]

2 3 1 4 13 THREADING THE UPPER THREAD Please Note: It is important to carry out the threading correctly as by not doing so several sewing problems could result. Start by raising the needle to its highest point, and also raise the presser foot to release the tension discs. 1 Lift up the spool pin. Place the spool of thread on the spool pin so that t[...]

14 THREADING THE UPPER THREAD 4. Thread the tension module by passing the thread b e t w e e n the silver discs. 5. Then, down and around the check spring holder . 3 Guide the thread around the thread guide pulling the thread through the pre-tension spring as illustrated. 5 6 7 3 4 6. At the top of this movement, pass the thread from right to the l[...]

4 15 USING THE NEEDLE THREADER 2 The needle threader automatically turns to the threading position and the hook pin passes through the needle eye. 3 T ake the thread in front of the needle. 4 Hold the thread loosely and release the lever slowly . The hook will turn and pass the thread through the needle eye forming a loop. Pull the thread through t[...]

16 CUTTING THE THREAD Raise the presser foot. Remove the fabric, draw the threads to the left side of the face cover and cut using the thread cutter . The threads are cut at the proper length to start the next seam. 1 Hold the upper thread with the left hand. T urn the handwheel towards you (counterclockwise) lowering, then raising the needle. 2 Ge[...]

17 TWO -STEP PRESSER FOOT LIFTER The presser foot lifter raises and lowers the presser foot. When sewing several layers or thick fabrics, the presser foot can be raised a second stage for easy positioning of the work. The presser foot pressure of the machine has been pre- set and requires no particular readjustment according to the type of fabric ([...]

ST ARTING SEWING 18 With the sewing machine turned off , insert the foot control plug into its connector on the sewing machine. T urn on the sewing machine, and then slowly depress the foot control to start sewing. Release the foot control to stop the sewing machine. Foot control The Start/Stop button can be used to run the machine when the foot co[...]

- Basic thread tension setting is "4". T o increase the tension, turn the dial to the next number up. T o decrease the tension, turn the dial to the next number down. - Proper setting of tension is important for good sewing. There is no single tension setting appropriate for all the stitch functions and fabrics. However , 90% of all sewin[...]

20 CHANGING THE PRESSER FOOT Attaching the presser foot holder Attaching the presser foot Removing the presser foot Attaching the edge/guilting guide Raise the presser foot bar (a) by raising the presser foot lifter . Attach the presser foot holder (b) as illustrated. Lower the presser foot holder (b) until the cut-out (c) is directly above the pin[...]

21 PRESSER FOOT CHART All purpose foot (T) Zipper foot (I) Buttonhole foot (D) Darning/ Embroidery foot (Optional) Gathering foot (Optional) Button sewing foot W alking foot (Optional) APPLICA TION PRESSER FOOT PRESSER FOOT APPLICA TION Inserting zippers Satin stitch sewing Quilting foot (P) (Optional) Quilting Free-motion darning, embroidery , mon[...]

NEEDLE, FABRIC, THREAD SELECTION GUIDE Please Note: - In general, fine threads and needles are used for sewing fine fabrics, and thicker threads are used for sewing heavy fabrics. - Always test thread and needle size on a small piece of fabric which will be used for actual sewing. - Use the same thread for needle and bobbin. - Ball point needles ar[...]

REPLACING THE NEEDLE 23 Change the needle regularly , especially if it is showing signs of wear and causing problems. Insert the needle following the illustrated instructions. A . L oosen the needle clamp screw and tighten again after inserting the new needle. The flat side of the shaft should be towards the back. B . Insert the needle as far up as[...]

24 Start/stop button OPERA TION BUTTONS The machine will start running when start/stop button is pressed and will stop when pressed the second time. The machine will rotate slowly at the beginning of sewing. The sewing speed will increase slowly until reaching the speed setting selected with the speed limiting adjustment lever . The foot control mu[...]

When Direct P atterns 1-4, and B Group P atterns 01-05 are selected, the machine will immediately sew 3 locking stitches when the Auto-lock button is pressed, then automatically stop. The LCD screen will display the figure " " until the machine is stopped. Auto-lock button When Direct P atterns 6-7, B Group P atterns 07-16 , 33-50, and C [...]

26 OPERA TION BUTTONS Needle up/down position button The machine automatically stops sewing with the needle in the up position. The Needle up/down position button offers the option of stopping with the needle in the up position or down in the material. Pressing the Needle up/down position button will raise or lower the needle. An arrow appears to t[...]

Stitch width adjustment button Mode selection button Elongation button Mirror button T win needle button 27 FUNCTION BUTTONS FUNCTION BUTTONS When you select a stitch, the machine will automatically set the recommended stitch width, which will be indicated by numbers on the LCD screen. The stitch width can be regulated by pressing the stitch width [...]

28 FUNCTION BUTTONS MODE selection button Elongation button (see page 60) B Group P atterns 33-45 can be elongated up to five times its normal length by pressing the " " button. Changing the width or length of the stitches offers a greater variation of stitch patterns. The LED light will be set at Direct mode " " when the machin[...]

29 FUNCTION BUTTONS T win needle button (see page 62) With the twin needle, the Direct P atterns 1-7, B Group P atterns 01-16, 33-50, and C Group P atterns 01-07, 09-26, 28-62, 64-66 can be sewn in two parallel lines of the same stitch with two different threads. Press the " " button, the machine automatically reduces the maximum width fo[...]

Direct pattern selection and number buttons Clear button Edit button Memory button Direct pattern selection and number buttons 30 SELECTION BUTTONS Direct pattern selection Press the buttons to select the utility patterns shown beside the number button when the mode button is set at the Direct mode. Number buttons T o select the desired pattern and[...]

The " " button is used to modify settings while in the memory mode. Pressing the " " button will allow manual setting of the stitch width, stitch length, mirror , elongation and the auto-lock function. Press the " " button again to leave the editing mode and return to memory mode. (See pages 66-69 for more information [...]

32 Free-arm sewing is convenient for sewing tubular areas such as pant hems and cuffs. Free arm Sewing corners 1. Stop the sewing machine when you reach a corner . 2. L ower the needle into the fabric manually or by pressing the needle up/ down button once. 3. Raise the presser foot. 4. Use the needle as a pivot and turn the fabric. 5. L ower the p[...]

1 2 3 33 Installing the extension table The black button on the side of the all purpose presser foot will lock the presser foot in a horizontal position if you push it in before lowering the presser foot. This ensures even feeding at the beginning of a seam and helps when sewing multiple layers of fabric such as sewing over seams when hemming jeans[...]

34 Adjusting the stitch width  The maximum stitch width for zigzag stitching is "7.0"; however , the width can be reduced for most patterns. The width increases or decreases as you press the "+" or " " stitch width adjustment buttons from "0.0-7.0". Adjusting the stitch length The density of zigzag stitche[...]

35 Stretch stitches are strong and flexible and will give with the fabric without breaking. Good for easy to ravel and knit fabrics. It is good for joining durable fabric such as denims. These stitches can also be used as a decorative top stitch. Straight stretch stitch is used to add triple reinforcement to stretch and hardwearing seams. Stretch s[...]

36 OVERCASTING STIT CHES 1 Change the presser foot to the all purpose f oot. 2 Sewing the overcasting along the edge of the fabric so that the needle drops over the edge of the fabric on the right side. Using the all purpose foot T 2.5~4.5 2.0~3.0 1 2 B-10 2 Using the overcasting foot E 5.0~7.0 2.0~3.0 Attention: The overcasting foot should be used[...]

37 BLIND HEMS B -11: B -12: Blind hem for woven fabrics Blind hem for stretch fabrics a b F old the fabric as illustrated with the wrong side uppermost. Adjust the guide (b) by turning the knob (a) so that the guide just rests against the fold. T urn over the fabric. 5mm 5mm Overcasting stitches Reverse side Reverse side Please Note: It takes pract[...]

38 BUTTON SEWING 2.5~4.5 Select the pattern 31 from the Group P atterns "B" to get the button sewing stitch. Change the presser foot to the button sewing foot. Move the drop feed lever to " " to lower the feed dogs. F or buttons with 4 holes, sew through the front two holes first, push work forward and then sew through the back [...]

39 Please Note: Before sewing a buttonhole on your project, practice on a scrap piece of the same type of fabric. Attach the buttonhole foot, then pull out the button holder plate and insert the button. The size of the buttonhole is determined by the button inserted in the button plate. The thread should be passed through the hole in the presser fo[...]

40 Select the buttonhole stitch. Adjust the stitch width and the stitch length to the desired width and density . P osition the fabric under the presser foot so that the centerline's mark is aligning with the center of the buttonhole foot. Lower the buttonhole lever , making sure it is positioned behind the bracket on the buttonhole foot, as i[...]

41 6 Buttonholes are sewn from the front of the presser foot to the back, as shown. 6 7 Cut the center of the buttonhole being careful not to cut any stitches on either side. Use a pin as a stopper at the bar tack so y o ud on o tc u tt o om u c h . 7 6 BUTTONHOLE SEWING 7 B-17 B-18 B-19 B-21 B-20 B-22 B-23 B-24 B-26 B-25[...]

42 When sewing corded buttonholes, hook a heavy thread or cord under the buttonhole foot. Please Note: It is suggested that you use interfacing on the backside of the fabric. Once sewing is completed, pull the gimp thread gently to remove any slack, then trim off any excess. 2 Attach the buttonhole foot and hook the gimp thread onto the back of the[...]

43 BAR T ACK STIT CH D 1 Select pattern 32 of Group "B" to get the bar tack stitch. Change the presser foot to the buttonhole foot. from the P atterns 2 Pull the button holder to the rear . Set the button guide plate on the buttonhole foot to the desired length. 2 1 B-32 4 P ass the upper thread down through the hole in the presser foot. [...]

44 EYELET STITCH B -27: B -28: Select for sewing eyelets on belts , etc Select for sewing eyelets on belts , etc 5.0 6.0 7.0 1 Select pattern 27 or 28 from the Group P atterns "B" to get the eyelet stitch. Attach presser the foot "A". 1 A B-27 B-28 2 Press the " " or " + " stitch width adjustment to button se[...]

45 DARNING STIT CH 3.5~7.0 1.5~2.0 D B-29 B-30 1 Select pattern 29 or 30 from the Group P atterns "B" to get the darning stitch. Change the presser foot to the buttonhole foot. 1 2 Baste the upper fabric and the reinforcement fabric together . Select the width of the pattern by using the stitch width button. Lower the presser foot over th[...]

46 DARNING STIT CH Please Note: When lowering the presser foot, do not push in the front of the presser foot, otherwise the darning will not be sewn with the correct size. 5 P osition the fabric so that the needle is 2mm (1/16 inch) in front of the area to be darned, and then lower the presser foot lever . 7 Darning stitches are sewn from the front[...]

Attention: Zipper foot should be used with machine set for straight stitch only. Care should be given when choosing needle position as the needle could hit the presser foot and break when sewing with an altered needle position or with any other pattern. 47 ZIPPER INSERTION 1 Baste the zipper opening on the garment. 2 Press open the seam allowance. [...]

48 ZIPPER INSERTION Inserting a lapped zipper 1 Baste the zipper opening on the garment. 2 Fold back to the left seam allowance. T urn under the right seam allowance to form 3mm (1/8 inch) fold. 2 3 Attach the zipper foot. Attach the right side of the presser foot pin to the holder when sewing the left side of the zipper . Attach the left side of t[...]

49 NARROW HEMMING K 1 Fold the edge of the fabric over about 3mm (1/8 inch), then fold it over again 3mm (1/8 inch) for about 5cm (2 inches) along the edge of the fabric. 2 Insert the needle into the fold by rotating the handwheel toward you, and lower the presser foot. Sew several stitches and raise the presser foot. Insert the fabric fold into th[...]

50 M Mark the design on the fabric. Insert the cord in the center groove of the cording foot from the right side opening. Pull the cord about 5cm (2 inches) behind the foot. The grooves of the foot will hold the length of the cord in place while the stitches are being formed over the cord. Select the stitch and adjust the stitch width so that the s[...]

SA TIN STITCH SEWING A 2.5~7.0 0.3~1.0 Use the satin stitch foot for satin stitching and sewing decorative stitches. This foot has a groove on the underside which allows dense stitching to pass freely underneath. T o change the satin or decorative stitch pattern, you may adjust the length and width of the pattern by pressing the stitch length and w[...]

P Sew the first row and move over the fabric to sew successive rows with the guide riding along the previous row of stitching. 3.5 1.0~3.0 Insert the edge/quilting guide in the presser foot holder as illustrated and set the space as you desire. * The is an optional accessory. Straight Stitch Foot 1 EDGE/QUIL TING GUIDE 52[...]

GA THERING 1.0 4.5 Note: Note: When testing machine for adjustments to achieve desired fullness, work with 10" increments of the fabric, trims or elastic. This makes it easier to determine the adjustments and how much change is needed for your project. Always test on your project fabric and on the same grainline as will be used in your finishe[...]

SMOCKING 2 Knot the threads along one edge. Pull the bobbin threads and distribute the gathers evenly . Secure the threads at the other end. 3 Reduce the tension, if necessary and sew decorative pattern stitches between the straight seams. 4 Pull out the gathering stitches. T A 2 3 4 1 Use the all purpose foot to sew straight lines 1cm (3/8") [...]

First sew around the edges of the hole to secure the threads. Stitch across the opening moving the hoop backward and forward under the needle. Overlap the outline stitching at each end of the area, keeping the lines of stitching closely spaced and even in length. When the opening is filled, turn the work and cover the area with crosswise lines of s[...]

Select the zigzag stitch pattern and adjust the stitch width as desired. Sew at a constant speed, moving the hoop slowly along the lettering. When the letter is finished. Secure with a reinforcement stitches at the end by press Auto- lock button. * Embroidery hoop is not included with the machine. Monogramming Stitch along the outline of the design[...]

Please Note: Always try to sew first without the walking foot accessory which should be used only when necessary. It is easier to guide the fabric and you have a better view of the seam when using the standard, regular foot on your machine. Y our sewing machine offers excellent stitch quality on a wide range of fabrics from delicate chiffons to mul[...]

5 This foot is used to trim excess material while sewing. 1. Attach the Side Cutter , making sure the cutter's "arm" fits around the needle bar thumb screw . Tighten the thumb screw , securing the foot. 2. Slowly turn the handwheel towards you; the needle should go over the stitch finger on the foot. If the needle is hitting the meta[...]

EDGE JOINING FOOT This foot is used to apply lace edgings. 1. Snap on the Edge Joining F oot. Press in the 5/8 of an inch seam allowance on the fabric, but leave the lace edging flat. 2. Slip the fabric and lace right side up under the presser foot, so that the inseam edges meet at the center of the foot, along the guide. 3. Begin sewing, keeping y[...]

* The Invisible Zipper Foot is an optional accessory. This foot provides a hidden closing on skirts, dresses and other garments. 1. Before closing the seam on your project, use a fabric marker to mark the desired bottom end of the zipper on both sides of the zipper opening. 2. F old in and press the seam allowances of both opening edges and open ou[...]

3 W orking on the right side of the fabric, place the center of the presser foot on the seam line of the joined fabrics and stitch over the seam. T A 3 1 Place the two fabrics, right sides together , and sew using a straight stitch. 2 Open the seam allowance and press it flat. 2 1 B-13 B-14 C-25 A-15 C-01 DECORA TIVE TOPSTIT CHING 2 1 1 Separate th[...]

T A Scallop edging 1 Sew on hem line. 2 T rim the fabric close to the stitching taking c a r en o tt oc u tt h et h r e a d . 2 1 C-34 B-36 SCALL OP STITCH T 3 T urn fabric over and push out the curved seam to the surface and press it. Scallop hem 3 1 Fold the fabric, right sides together . Sew along the folded edge, as illustrated. 2 Cut the fabri[...]

EL ONGA TION 1 The stitches shown in the diagram above can be elongated up to five times the normal length by pressing the elongation button. 2 The LCD screen icon for elongation imaging of the pattern appears. Please Note: Patterns from B Group 33-45 can be elongated and mirrored simultaneously. 3 When the width or length of the stitch is changed,[...]

Please Note: - The cannot be mirror imaged. - Mirror imaged patterns can also be combined with other patterns. Direct Patterns " " and B Group Patterns 17-32 1 Select the pattern. 3 The LCD screen icon for mirror imaging of the pattern appears. 2 Pressing the mirror button. A . Normal pattern sewing . B . Mirror pattern sewing. A B 2 3 1 [...]

USING THE TWIN NEEDLE 2 F ollow the instructions for single -needle threading using the horizontal spool pin. Thread through the left needle. Set the second spool pin (included with the accessories) into the hole on the top of the machine. Thread through remaining points, making certain to omit the thread guide above the needle and pass thread thro[...]

Please Note: - Multiple patterns selecting from pattern mode s,,,c a n b e c o m b i n e d a n d s e w n together. - This machine has 4 modules of program memory and each module can retain 20 units of stitches. - cannot be entered into memory. - All the units in the memory can be edited to set its function such as Stitch length, Stitch width, Elong[...]

M MEMORY M M 6 The selected pattern displays on the LCD screen. 7 Repeat step 5, 6 for more patterns to be stored in the memory . Please Note: One memory module will hold up to 20 patterns. When 20 patterns have been selected, the machine will beep to signal that the memory is full. 5 Press the desired pattern number . (e.g. 50) 8 Press the " [...]

Press the " " button when complete and return to browse status. 3 MEMORY Editing patterns 1 Use the stitch width adjustment button to select the pattern that you wish to edit while in the memory mode. 2 Press the " " button to edit the pattern. Please Note: The stitch length, stitch width, Elongation, Mirror , and Auto -lock of [...]

Press the " " button to enter memory mode and then input the number of the memory module. MEMORY 5 The screen shows the current sewing pattern. 6 Press the " " button to leave memory mode and return to the normal screen. 000 2 Input the number of memory module. (e.g. 2) 3 LCD screen shows the first pattern of the selected memory[...]

Instruction animation message display Bobbin winding The bobbin winder is winding the bobbin. WARNING FUNCTIONS W arning animation message display The sewing machine is experiencing a problem The animation message means that the thread is twisted or jammed and the hand wheel axle cannot move. Please look through the "T rouble shooting guide&qu[...]

WARNING FUNCTIONS - When operating correctly: 1 beep - When the memory is full 20 units of pattern: 3-short beeps - When operating incorrectly: 3-short beeps - When the sewing machine is in trouble and can't sew: 8 seconds short beeps It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer to the &qu[...]

BUZZER SOUND 2 Y ou can select the mode by pressing the stitch width " + " or " " button. Select desired mode sound on " "or sound off "" .  3 Pressing the " " button. The Buzzer sound setting mark will appear on the LCD screen when you have set it. 0000 3 1 Press on the " " button and [...]

If the surface of the sewing machine is dirty , lightly soak a cloth in mild detergent, squeeze it out firmly and then wipe the surface. After cleaning it once in this way , wipe the surface again with a dry cloth. Cleaning the sewing machine surface Attention: Disconnect the machine from the wall outlet before carrying out any maintenance. Cleanin[...]

74 MAINTENANCE 3 Remove the needle, presser foot and presser foot holder . Remove the bobbin cover plate and bobbin. Remove the screw holding the needle plate and remove the needle plate. 4 Lift up the bobbin case and remove it. 5 Clean the hook race, feed dog and bobbin case with a brush. Also clean them, using a soft, dry cloth. 6 Replace the bob[...]

TROUBLE SHOOTING GUIDE Before calling for service, check the following items. If the problem still persists, contact Singer at www .singer .com Problem Cause Correction Upper thread breaks Lower thread breaks Skipped stitches 1.The machine is not threaded correctly . 2.The thread tension is too tight. 3.The thread is too thick for the needle. 4.The[...]

76 TROUBLE SHOOTING GUIDE Seam puckering 1.The needle thread tension is too tight. 2.The needle thread is not threaded correctly . 3.The needle is too heavy for the fabric being sewn. 4.Stitch length is too long for the fabric. 1.Loosen the thread tension. 2.Rethread the machine. 3.Choose a needle to suit the thread and fabric. 4.Shorten stitch len[...]

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 3.5 0.0 3.5 3.5 3.5 5.0 5.0 5.0 5.0 7.0 3.5 5.0 5.0 7.0 5.0 5.0 5.0 5.5 5.0 6.0 5.0 7.0 2.5 2.5 2.5 2.5 2.5 2.0 1.0 2.5 2.5 2.5 2.0 1.0 2.5 2.5 2.5 2.5 0.5 0.5 0.5 0.5 0.5 0.5 T T T T T T T T E T F F T A A T T D D D D D 1 2 3 4 5 6 7 8 9 0 3.5 0.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 2.5 [...]

Functions Presser Foot Auto Auto Auto-lock Elongation Mirror/ Presser foot T win needle Reverse Memory Width (mm) Length (mm) Thread cutter 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 7.0 7.0 6.0 6.0 7.0 7.0 7.0 7.0 3.5 2.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 0.5 0.5 1.0 1.[...]

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 5.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 5.0 4.0 3.5 3.5 4.0 3.5 6.0 7.0 6.0 5.0 5.0 6.0 5.0 5.0 6.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 6.0 7.0 2.5 1.0 1.0 1.0 1.5 1.5 1.5 1.5 2.0 2.0 2.5 2.5 2.5 2.5 2.0 1.5 2.0 2.0 2.0 1[...]

80 STITCH ADJUSTMENT REFERENCE CHART 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 5.5 5.0 6.0 3.5 5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 6.0 6.0 7.0 5.0 5.0 5.0 2.0 2.0 3.0 2.0 2.0 2.0 2.5 2.0 3.0 2.0 3.0 2.0 1.5 1.0 2.0 2.5 2.5 2.5 2.0 2.0 2.5 2.5 2.5 3.0 2.0 2.0 2.0 T T T T T T T A [...]

Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance. 021H7A0101( ) Apr/1 1 SINGER H74 (H74A)/B5[...]